Water 2 People Teknologies

Naraina, Delhi

Tube Settler Media that we offer has high settling surface area whilst maintaining a small structure. It has a chevron shaped self-supporting structure in a tubular form with six sides. Tube Settler Media finds wide usage in water treatment, primary and secondary clarifiers in waste water treatment. We are one of the pioneering Manufacturers and Suppliers of Tube Settler Media from Delhi, India.

Tube Settler Systems for ClarificationTube settlers and parallel plates increase the settling capacity of circular clarifiers and/or rectangular sedimentation basins by reducing the vertical distance a floc particle must settle before agglomerating to form larger particles. Tube settlers 60 and adjacent to each other, which combine to form an increased effective setting area. This provides for a particle settling depth of a conventional clarifier, reducing settling times. Tube settlers capture the settleable fine floc that escapes the clarification zone beneath the tube settlers and allows the larger floc to travel to the tank bottom in a more settleable form. The tube settler’s channel collects solids into a compact mass which promotes the solids to slide down the tube channel.

Where can we use Tube Set Tube SettlerResidential and industrial waste water treatment plants, Potable water treatment plants, Oil separators, In rectangular or circular section reinforced concrete pools or sheet construction tanks, Tube Settler Lamella can be used, Shortly in all treatment plants where a good settling efficiency is expected. For some waste waters, a settling system using TUBE SET can become a stand-alone solution. Water parameters can be reduced to required criteria without needing to a chemical dosing, fast or slow mixing.

Advantages :

• Increase Capacity of Clarifier
• Enhance Particle agglomeration & Growth
• Enhance Suspended Solids Concentration
• Installation is Fast & Easy

Technical Specifications :

• Plain Settling Area of Media : 60o Slope – 11.0 m²/m³, 55o Slope – 13.0 m²/m³
• Cross Sectional Area : 120 mm x 44 mm
• Shape : Hexagonal Chevron
• Hydraulic Radius : 1.5 cm
• MOC of Media : PVC
• Thickness : 1.1 mm (+/- 0.1 mm)
• Filling Arrangement : Tongue & Groove
• Maximum Cont. Op. Temp :  55^oC
• Color : Black
• Distance Between Tubes : Horizontal - 120 mm & Vertical – 44 mm
• Separator Height : 500 mm – 5.5 m² Settling Area / m², 750 mm – 8.25 m² Settling Area / m², 1000 mm – 11.0 m² Settling Area / m²

Features :

• Increase Capacity of Clarifier
• Enhance Particle agglomeration & Growth
• Enhance Suspended Solids Concentration
• Installation is Fast & Easy

We are offering wide range of Aerators available in a variety of designs, capacity and dimensions. We are one of the well-known Manufacturers and Suppliers of Aerators. Made from superior-grade raw materials, our Aerators are robust, lustrous, excellently finished and durable. Buyers can get Aerators from us at market leading prices and place bulk orders. We offer customized Aerators as well.

Highlights :

• Aeration is the process of bringing water and air into close contact in order to remove dissolved gases, such as carbon dioxide, and to oxidize dissolved metals such as iron.
• It can also be used to remove volatile organic chemicals (VOC) in the water.
• Aeration is often the first major process at the treatment plant. During aeration, constituents are removed or modified before they can interfere with the treatment processes.
• Aeration is used to treat tastes and odors, to help remove minerals such as iron and manganese from water, and to remove carbon dioxide from the water.
• Aeration removes or modifies the constituents of water using two methods - scrubbing action and oxidation. Scrubbing action is caused by turbulence, which results when the water and air mix together.
• The scrubbing action physically removes gases from solution in the water, allowing them to escape into the surrounding air.
• In the picture above, carbon dioxide and hydrogen sulfide are shown being removed by scrubbing action. Scrubbing action will remove tastes and odors from water if the problem is caused by relatively volatile gases and organic compounds.
• Oxidation is the other process through which aeration purifies water.
• Oxidation is the addition of oxygen, the removal of hydrogen, or the removal of electrons from an element or compound.
• When air is mixed with water, some impurities in the water, such as iron and manganese, become oxidized.
• Once oxidized, these chemicals fall out of solution and become suspended in the water.
• The suspended material can then be removed later in the treatment process through filtration.