Woodage

Chakkarpur, Gurugram, Haryana

A U-shape modular kitchen spans three walls, providing 40 to 60 percent more storage than an L-shape layout in the same floor area. This layout suits 3BHK and 4BHK apartments, builder floors, and independent houses in Gurgaon where the kitchen has a minimum width of 7 feet and one open side for entry.
WoodAge Interiors builds U-shape kitchens at our CNC-equipped factory in DLF, Gurugram. The three-wall configuration allows dedicated functional zones. The cooking zone with hob and chimney sits on one wall. The washing zone with sink sits on the adjacent wall. The third wall holds a tall pantry unit, additional storage, and prep counter space. This zoning reduces unnecessary walking during cooking.
A U-shape layout has two internal corners. Both corners require a solution to prevent dead space. We fit each corner with either a magic corner, a carousel, or a Le-Mans system depending on the cabinet width. The hardware for these corner solutions comes from Hettich or Hafele.
Material specifications remain consistent with all WoodAge kitchens. Base cabinets use BWP plywood IS 710. Shutters are laminate, acrylic, PU paint, or veneer. Edge banding is 2mm PVC on all panel edges, including internal surfaces. The CNC cutting ensures that the three separate wall runs align perfectly when installed, creating a seamless look along the countertop.
This layout is common in older DLF builder floors, independent houses in South Delhi, and villas along the Southern Peripheral Road where kitchen sizes are typically 10x10 feet or larger.
Factory visits are open at 16 SCO, Saraswati Vihar, DLF, Gurugram 122002.

Frequently Asked Questions:
Q: What is the minimum kitchen size required for a U-shape layout?A: A U-shape kitchen needs a minimum width of 7 feet and a length of 8 feet. This allows for 2 feet of countertop depth on each opposing wall and at least 3 feet of clear walking space in the center. Anything narrower than 7 feet will make the center corridor feel cramped.
Q: U-shape versus island kitchen, which provides more storage?A: A U-shape layout with a tall pantry unit typically provides more enclosed cabinet storage than an island layout. An island adds open countertop space for prep work or seating, but the storage underneath is limited to standard base cabinet depth. If your priority is maximum hidden storage, U-shape is the better choice.

An island kitchen incorporates a freestanding counter separate from the wall-mounted cabinets. It requires an open-plan kitchen layout where the kitchen opens directly into a living or dining area without a partition wall. The island serves as additional prep space, a breakfast bar with seating, or a secondary cooking zone.
WoodAge Interiors designs and manufactures island kitchens at our DLF, Gurugram factory. The main wall cabinets can be in any layout, typically L-shape or parallel, with the island as the central feature. The island carcass is built to the same BWP plywood specification as the main kitchen for structural durability.
A practical island requires a minimum dimension of 4 feet by 2.5 feet for a basic prep counter. If you want seating, the island needs to be at least 6 feet long to accommodate 2 to 3 bar stools with adequate legroom. The height typically matches the main counter at 860mm, or it can be raised to 900mm for a dedicated breakfast bar.
Electrical planning is critical for an island. Power points for appliances like toasters, mixers, or charging sockets must be integrated into the island. This requires concealed wiring routed through the floor slab or false ceiling from the nearest wall source. We design the island with internal cable channels and specify the required electrical points. The actual wiring is executed by your electrician before the island top is fitted.
This layout is found in DLF villas, South Delhi independent floors, premium Golf Course Road apartments with open kitchens, and farmhouses around Gurgaon.
Frequently Asked Questions:
Q: Can I fit an island in my 3BHK Gurgaon apartment?A: Most standard 3BHK apartments in Gurgaon have closed kitchens ranging from 8x8 to 10x10 feet. These spaces cannot accommodate an island because there is no open side and the room width is insufficient for the required 3 feet of clearance around a freestanding counter. An island is only feasible if you remove the kitchen partition wall to create an open-plan layout and if the resulting space is at least 12x12 feet.
Q: Can a hob be fitted on the kitchen island?A: Yes, a 2-burner hob can be mounted on the island with a ceiling-mounted island chimney directly above. This requires extending the gas pipeline to the island and providing an electrical point for the chimney. The island structure is designed with the appropriate cut-out for the hob, but gas fitting must be done by a licensed professional.

WoodAge Interiors manufactures modular kitchens at its own factory in DLF, Gurugram. We are the manufacturer, not a reseller or a platform routing your order to third-party workshops. Every component is designed on CNC software, cut on panel saws, profiled on CNC routers, edge-banded on automatic machines, and assembled by our in-house team.
Our kitchen carcasses use BWP plywood certified to IS 710:2019 for all base cabinets. This standard certifies the plywood for boiling water exposure, making it the only reliable panel material for Indian kitchen wet zones where humidity remains high for months during monsoon. We do not use MDF or particle board for base cabinets because both materials absorb moisture through exposed edges and swell within one to two monsoon cycles.
Shutter finishes available include high-pressure laminate from Merino, Greenlam, and Century, acrylic for high-gloss surfaces, PU paint for seamless matte finishes, and natural veneer for wood grain textures. Hardware is sourced from Hettich, Hafele, and Blum. Standard specification includes Hettich Sensys soft-close hinges rated for over 80, 000 opening cycles.
Machine manufacturing provides accuracy that site carpentry cannot match. CNC cutting ensures dimensional tolerance within 0.5mm, meaning every cabinet fits flush against the next with no visible gaps. Automatic edge banding applies 2mm PVC tape to all four sides of every panel, including back panels and internal shelf edges. This prevents moisture ingress at the edges, which is the primary cause of ply separation and delamination in Indian conditions.
We build L-shape, U-shape, parallel, island, straight, and peninsula layouts. Standard accessories include soft-close baskets, tandem drawers, masala pull-outs, corner solutions, tall pantry units, and chimney and sink cut-outs. The process involves free site measurement in Gurgaon, 3D design visualization, factory manufacturing for 25 to 30 working days, and installation in 3 to 5 working days.
Service areas include all Gurgaon sectors, Dwarka Expressway, Sohna Road, Golf Course Road, Delhi, Noida, Faridabad, and Ghaziabad. Factory visits are open Monday to Saturday, 9 AM to 6 PM, at 16 SCO, Saraswati Vihar, DLF, Gurugram 122002.

Frequently Asked Questions:
Q: What is the actual cost of a modular kitchen in Gurgaon for a 2BHK?A: At WoodAge Interiors, an L-shape modular kitchen for a standard 2BHK in Gurgaon costs between 1, 50, 000 and 2, 50, 000. This includes BWP plywood carcass, laminate shutters, Hettich soft-close hardware, basic accessories like baskets and pull-outs, and complete installation. The final cost depends on the linear feet of the kitchen and the specific accessories selected.
Q: Why should I choose BWP plywood over MDF for my kitchen?A: MDF is essentially compressed wood dust and glue. In the high-humidity environment of a Delhi NCR kitchen, especially during monsoons, moisture enters through screw holes, edge joints, and un-banded edges. MDF absorbs this moisture and swells permanently. BWP plywood certified to IS 710 is constructed with cross-laminated veneer plies and waterproof adhesive, allowing it to withstand prolonged moisture exposure without structural degradation.
Q: Can I visit the factory before placing an order?A: Yes. We encourage factory visits. You can see the CNC machines cutting panels, the edge banding process, material samples, and finished cabinets on the production floor. The factory is at 16 SCO, Saraswati Vihar, DLF, Gurugram. No appointment is needed during working hours.
Delivery Time: 30 to 35 Day

An L-shape modular kitchen uses two adjacent walls for countertops and cabinetry, leaving the opposite side open for movement and access to the dining area. This is the most common layout for 2BHK and 3BHK apartments in Gurgaon because it fits standard kitchen spaces of 7x7 feet to 10x10 feet efficiently.
WoodAge Interiors manufactures L-shape kitchens entirely at our Gurugram factory. The carcass uses IS 710 BWP plywood for base cabinets. Wall cabinets use HDHMR, which is adequate for dry storage. Shutters come in laminate, acrylic, or PU paint based on your selection. Hardware specification defaults to Hettich Sensys soft-close hinges and Quadro drawer channels.
Every L-shape kitchen we build includes a corner solution. The corner where two base cabinets meet creates a dead space that is difficult to access. We fit either a magic corner system, which uses pull-out wire baskets to bring items out to you, or a carousel unit, depending on the cabinet dimensions. Without this solution, roughly two square feet of storage becomes unusable.
Standard counter height is 860mm and depth is 600mm, which aligns with Indian ergonomic standards and standard hob dimensions. Wall cabinet depth is 300mm. The gap between base and wall cabinets is 700 to 750mm to accommodate a standard chimney and backsplash.
Many of our L-shape kitchen installations are on the Dwarka Expressway corridor in sectors 102 to 113. Apartments by builders like M3M, Godrej, and Sobha in this area typically have kitchen footprints of 8x8 to 9x9 feet, which suits the L-layout perfectly. We are familiar with the plumbing and electrical point positions in these specific projects, which speeds up the design process.
Factory visit is open at 16 SCO, Saraswati Vihar, DLF, Gurugram. Visit us for site measurement.

Frequently Asked Questions:
Q: Does an L-shape kitchen waste corner space?A: Without a corner mechanism, yes. The internal corner of an L-shape is a dead zone where items get pushed to the back and are impossible to reach. WoodAge includes a corner solution in every L-shape kitchen, either a magic corner pull-out or a carousel, which recovers most of that space for practical storage.
Q: What size L-shape kitchen fits in a standard Gurgaon 2BHK?A: Most 2BHK apartments in Gurgaon have kitchen spaces between 7x7 and 9x9 feet. An L-shape layout in this space typically yields 8 to 12 linear feet of countertop. This is sufficient for a 2-burner or 3-burner hob, a chimney, a sink, and adequate storage for a small family.
Q: Can an L-shape kitchen accommodate a dishwasher?A: Yes. A standard dishwasher is 600mm wide, which fits within the base cabinet run of an L-shape kitchen. It requires a water inlet, a drain outlet, and an electrical point behind the cabinet. We plan the dishwasher position during the 3D design stage and build the cabinet to the exact dishwasher dimensions.

Supply Ability:15 to 20 Kitchens Per MonthDelivery Time:30 to 35 DaysKeywords:l shape modular kitchen gurgaon, l shape kitchen price gurgaon, 2bhk kitchen manufacturer dwarka expressway, l shape kitchen with island gurgaon

A parallel kitchen, often called a galley kitchen, places cabinets on two opposing walls with a clear walking corridor between them. This layout is designed for narrow, elongated kitchen spaces, typically 5 to 7 feet wide and 8 to 12 feet long. It is common in older Gurgaon apartments, builder floors, and specific 2BHK layouts where the kitchen is a confined room rather than an open space.
WoodAge Interiors manufactures parallel kitchens at our Gurugram factory using BWP plywood for base cabinets and HDHMR for wall cabinets. The two-wall setup creates a highly efficient work triangle. The hob and chimney sit on one wall while the sink and prep counter sit on the opposite wall. The cook stands in the center and can pivot between cooking and washing with minimal steps.
The minimum recommended clearance between the two opposing countertops is 3.5 feet, or 1050mm. Less than this makes it difficult for two people to pass each other or to open opposing cabinet doors simultaneously. During our free site measurement, we check this dimension to confirm a parallel layout will work ergonomically.
Machine manufacturing ensures that the cabinets on opposing walls are perfectly aligned. CNC cutting guarantees that the countertop lengths on both walls match exactly, and automatic edge banding seals all panel edges against the moisture prevalent in the narrow corridor of a galley kitchen.

Frequently Asked Questions:
Q: Is a parallel kitchen good for small spaces?A: Yes, it is specifically designed for narrow spaces where an L-shape or U-shape will not fit. By utilizing both long walls, a parallel kitchen provides roughly double the storage and counter space compared to a single-wall straight kitchen in the same room.
Q: What happens if my kitchen is less than 3.5 feet wide?A: If the clear width between walls after tiling is less than 3.5 feet, a parallel layout will feel claustrophobic and opposing cabinet doors will collide. In this scenario, a straight single-wall kitchen is the more practical option, maximizing one wall and leaving the opposite side entirely open.

Sliding wardrobes use doors that glide parallel to the wardrobe body on bottom-rolling tracks. They save 1.5 to 2 feet of floor space compared to hinged wardrobes because no swing clearance is needed in front. This makes them the standard choice for bedrooms in Gurgaon apartments where the wardrobe wall typically faces the bed.
WoodAge Interiors manufactures sliding wardrobes at our CNC factory in DLF, Gurugram. We offer 2-door, 3-door, and 4-door configurations in widths from 4 feet to 12 feet. Heights go up to 9 feet for floor-to-ceiling installations, which is common in new Gurgaon apartments with higher slab-to-slab heights.
The sliding mechanism uses Hettich or Hafele bottom-rolling tracks with integrated soft-close dampers. Bottom-rolling systems carry the shutter weight on the lower track, which provides smoother operation and better longevity compared to top-hung systems where the weight pulls down on the top rail.
Internal layouts are customized for Indian clothing. We include a long-hanging section of at least 5 feet for sarees and lehengas, a short-hanging section of 3.5 to 4 feet for daily wear, folded shelves for T-shirts, soft-close drawers for accessories, and a dedicated trouser rack. Every panel, including the back panel and top/bottom boards, receives machine-applied 2mm PVC edge banding on all four sides to prevent warping.
Shutter options include laminate, acrylic, fluted glass, plain glass, mirror, or a combination split across the shutter panels.
Frequently Asked Questions:
Q: What is the standard depth of a sliding wardrobe?A: The standard internal depth is 600mm, which is required for clothes on hangers to clear the shutter. Including the shutter thickness and sliding track, the external depth is approximately 660 to 680mm. You need a minimum clear wall depth of 700mm to install a standard sliding wardrobe.
Q: Can I change the sliding wardrobe shutters later without replacing the whole unit?A: Yes. The shutters are independent panels mounted on the sliding track. If you want to update the look, the shutters can be removed and new ones manufactured to fit the existing track and carcass. This is significantly cheaper than replacing the entire wardrobe.

Keywords:sliding wardrobe manufacturer gurgaon, sliding wardrobe gurugram, floor to ceiling wardrobe gurgaon, hettich sliding door wardrobe delhi ncr

A walk-in wardrobe is a dedicated room or alcove fitted with modular shelving, hanging rods, and drawers on multiple walls. You step inside to access your clothes rather than opening a single piece of furniture. Walk-in wardrobes require an existing room or alcove with a minimum dimension of 5x5 feet.
WoodAge Interiors fits out walk-in wardrobe spaces with a modular system built at our CNC factory. We use floor-to-ceiling BWP plywood or HDHMR panels as the structural back, with adjustable shelving brackets, hanging rods at multiple heights, pull-out wire baskets, soft-close drawers, and accessory organizers mounted to these panels.
Because the shelving brackets are adjustable, the internal layout can be reconfigured over time. If your storage needs change, shelves can be moved or swapped for hanging rods by simply unscrewing and repositioning the brackets. This modularity is not possible in a standard fixed wardrobe.
We plan the layout by zones. One wall is typically designated for long-hanging items like sarees and suits. A second wall holds folded shelving and drawers for daily wear. A third wall, if available, is used for shoes, bags, and accessories.
Walk-ins are common in master bedrooms of DLF villas, South Delhi independent floors, and premium 4BHK apartments on Golf Course Road. The entry to the walk-in can be left open, fitted with sliding doors, or fitted with hinged doors depending on the room layout.
Frequently Asked Questions:
Q: What is the minimum room size needed for a walk-in wardrobe?A: The absolute minimum is 5x5 feet, which allows shelving on one wall and barely enough room to turn around. A practical walk-in that provides a meaningful upgrade over a standard wardrobe should be at least 6x6 feet, allowing storage on two walls with comfortable movement space.
Q: How does ventilation work in a walk-in wardrobe in Gurgaon?A: Walk-in wardrobes in Gurgaon apartments need some form of air circulation to prevent a stale smell or mildew on clothes, especially during monsoon. If the room has an existing window or duct, that suffices. If it is a fully enclosed interior room, we recommend your electrician install a small exhaust fan that vents into the adjacent bedroom or bathroom.

Keywords: walk in wardrobe gurgaon, walk in closet manufacturer gurugram, walk in wardrobe price delhi ncr, modular closet system gurgaon

A TV unit with integrated wall paneling combines the functional storage of a media console with the aesthetic treatment of a full wall feature. Designed and manufactured as a single coordinated piece at our factory, this ensures the TV cabinet and the surrounding wall panels share exact color, material, and finish consistency.
WoodAge Interiors builds these units at our CNC facility in DLF, Gurugram. The panel options include WPC fluted panels, which are the most requested design in current Gurgaon interiors due to their clean linear texture. We also offer MDF CNC-routed panels with geometric or jali patterns, backlit acrylic panels with concealed LED strips, and natural veneer panels.
The TV cabinet component is built in HDHMR with concealed cable management channels. Power points, set-top box, router, and gaming console cables route through the cabinet and into the wall panel, keeping all wires hidden from view. The unit is built to your exact wall width, whether that is 7 feet for a 50-inch TV or 12 feet for a 75-inch TV.
Installation involves fixing a plywood backer board to the wall, mounting the panel system onto this backer, and securing the TV cabinet. The TV bracket is fixed to the backer board, and the TV mounting is done by the client or their electrician.
Factory: 16 SCO, Saraswati Vihar, DLF, Gurugram
Frequently Asked Questions:
Q: Can wall paneling be installed on a wall with existing switchboards?A: Yes. During our site measurement, we map the exact position of every switchboard, light point, and conduit on the wall. The panel design incorporates cut-outs so switchboards remain accessible. Alternatively, your electrician can relocate the switches to an adjacent wall before we install the panels.
Q: How do I access the wires behind a backlit TV panel if something needs to be changed?A: We design the TV cabinet with an access panel or a removable back section in the cable management zone. The LED driver for the backlight is also placed in an accessible location, either inside the TV cabinet or behind a service hatch, so it can be replaced without dismantling the entire wall panel.

Keywords: tv unit manufacturer gurgaon, tv unit with wall paneling gurgaon, backlit tv unit gurugram, fluted panel tv unit delhi ncr

The durability of a sofa is determined by its frame and foam, not its upholstery. Upholstery can be changed, but a weak frame or low-density foam cannot be fixed without rebuilding the sofa. WoodAge Interiors manufactures sofas at our Gurugram factory focusing on these two structural elements.
The frame is built from kiln-dried sal or teak hardwood. Kiln-drying reduces the wood moisture content to between 8 and 12 percent. Air-dried wood commonly used by local upholsterers retains 15 to 25 percent moisture, which slowly evaporates in air-conditioned rooms, causing joints to loosen and frames to creak within a few years. Our joints are double-doweled, glued, and screwed, not stapled.
Seat cushions use 40-density high-resilience foam. This density provides firm support and recovers its shape after compression. Lower density foams, such as 28 or 32 density, develop permanent sag within one to two years of daily use. Back cushions use lower density foam for softer comfort. All foam is wrapped in non-woven fabric before upholstery to prevent friction damage.
We manufacture 2-seater, 3-seater, L-shape, and sectional configurations. Dimensions are customized to your living room. You select the seat depth, back height, arm width, and leg style. Upholstery options include fabric, leatherette, and genuine leather. Fabric options offer removable, washable covers.
Factory at 16 SCO, Saraswati Vihar, DLF, Gurugram.
Frequently Asked Questions:
Q: What foam density should I insist on for a sofa in India?A: Ask for 40-density high-resilience foam for the seat cushions. If the manufacturer cannot provide a specific density number and uses vague terms like "high-density" or "premium foam", it is likely lower density. Anything below 35 density for seat cushions will show visible sag within 12 to 18 months.
Q: How long does a kiln-dried wood sofa frame last?A: A properly constructed kiln-dried hardwood frame with dowelled and screwed joints typically lasts 12 to 15 years under normal household use. The limiting factor is usually the foam and upholstery wearing out before the frame fails, at which point the sofa can be re-upholstered.

Keywords: dining table manufacturer gurgaon, 6 seater dining table gurugram, 8 seater dining table delhi ncr, veneer dining table manufacturer gurgaon
Description:WoodAge Interiors manufactures dining tables at our Gurugram factory built to the exact dimensions of your dining area. Standard sizes include a 4-seater at 120x75 cm, a 6-seater at 150x90 cm, and an 8-seater at 180x90 cm. Custom sizes are produced when your dining space does not fit these standard dimensions, which is common in builder floors and villa dining areas.
Table top options include engineered wood with high-pressure laminate, which is the most scratch and heat resistant, natural veneer for a wood grain appearance, or a stone top such as marble or quartz which the client sources directly and for which we build the matching base frame.
The base frame is constructed from solid hardwood or structural plywood depending on the design. The frame is engineered to prevent lateral wobbling, which is a common problem with poorly balanced dining tables. We can also manufacture matching dining chairs with upholstered seats, wooden seats, or a combination.
For dining areas that need enclosed storage, we manufacture matching crockery units in the same material and finish, ensuring visual continuity between the table and the storage.
Factory at 16 SCO, Saraswati Vihar, DLF, Gurugram.
Frequently Asked Questions:
Q: How much clearance space is needed around a 6-seater dining table?A: A 6-seater table measuring 150x90 cm requires a minimum room area of 10x10 feet. This allows approximately 2.5 to 3 feet of clearance on all sides for pulling out chairs and walking behind seated diners. Less clearance makes the space feel cramped and makes it difficult for people to sit down or get up.
Q: What is the standard dining table height in India?A: The standard height is 750mm, or 30 inches. This pairs with a standard dining chair seat height of 450mm, leaving a 300mm gap between the seat and the table underside for comfortable legroom. Counter-height dining tables at 850 to 900mm are also available but require specific taller chairs.