Yulishih Industrial Co., Ltd.

New Taipei, - Select -, Taiwan

We are offering rlmk-1 is auto rotary marking machine, it is mainly applied to the marking of components with curved-surface like capacitor, fuse, ceramic gas discharge tube, shell of motor, filter and continuous marking for banding objects. RLMK-1's main features are listed below:1. The operation selects client-oriented design, it is operated easily, is adoptive for printing on different kinds of product. Its module could be switched in high efficiency based on requirements and still keep a good quality of printing.2. Alphabet mold was made of rubber in low cost and short lead-time, the cycle time can be changed partially for reaching the good operation condition.3. The Ink container uses the newest design; it is not only adjusted easily, it is but also changed by different ink container according to the requirement of different color under standard condition. This principle which only be changed completely without adjustment is advantageous to handle the change for operator.4. The design of ink-supply system, ink-smooth system, contact condition between alphabet mold and transferable roller are different to the traditional design, it is operated more skillful than before.effectively, same series of products could be programmed to 2 3 kinds of specifications of product (Module Design).5. The experience of market is rich; a tiny symbol could be printed out clearly. It has outstanding feature if comparing to the general marking machine.6. It is not only operated stand-alone, it is also suitable to link with peripherals. The related functions of external link control are reserved (automatic link application is about 60%)Specification:1. Power Supply: 100-240V AC, 47-63Hz, 1.9Amp2. Dimension (L x W x H): 320 x 280 x 485 mm3. Ink: UV Ink, Oven heat Ink4. The Minimum Marking Dimension: Height 0.7 mm5. Application Range: 8 85mm , W75 mm , =10 300Accepting special requirements of order6. Marking Speed: 50 cycles / min (It is not include the time of feed-in and feed-out) 75 m / min (It is suitable for the rectangle type of components)7. Weight: 30KgAir pressure must be kept to 4.0 Kg /c

We offer curved-surface printing automatic two colors rotary marking machine rlmk-2a is mainly applied to the marking of larger curved surface bi-color objects, it is different to single color printing, the color variation of the bi-color printing is very helpful to advance the merchandise pretty. features:1. The machine main transmission is brush-less dc servo motor. The structure is excellent, and the system is stable. 2. T is a single chip cpu control, and all the related parts are selected with high reliability and good quality. It is capable of running in a long time. 3. The newest design for ink container and transferable ink system, the marking is stable, the operation is simple. 4. It is not necessary to clean ink container every day, the clean is done almost every two weeks. 5. It is designed for printing on cylindrical components and printing continuously on oblong objects. Marking surrounding angle 10350, the maximum marking width 80mm. 6. The machine could be expanded to optional mechanism, it is also suitable for the application of link, has function of connecting an external signal of hardware and software. specifications:1. Power supply: 100-240v ac, 47-63hz, 1.9amp2. Dimension (l x w x h): 721 x 387 x 685mm3. Ink: uv ink, oven heat ink4. The minimum marking dimension: height 0.7mm5. Marking speed: 2025 cycles / min (it is not include the time of feed-in and feed-out) 75m / min(continuous marking for rectangle objects)6. Weight: 60kgair pressure must be kept to 4 6 kg /c

We offer high speed transferable marking machine cmk-3a could be applied to the marking of the component with little curved surface or the height of marking surface has a large tolerance; its marking effect is also good to the component with normal surface. Features: cmk-3a has a new function for adjusting the speed of rolling ink; its speed can be adapted to different type of ink, control the best condition of printing completely, and ensure the best quality of printing. 1. Cmk-3a has manual controlled roller design optionally, therefore, it could confirm all the motions minutely, adjust the related condition to the best status, and bring the machines performance into full play. 2. Changing the original printing way of directly printing to the new printing way, which the alphabet mold is inked first, transfer ink into the rubber, and the transferable rubber is printed on the surface of product lastly, such new printing way could reduce the influence of the height of product in printing, and could spread ink at larger area in printing (ex.: the logo, bold line, etc.). 3. We supply many kinds of hardness of transferable rubber, which can be adapted to the different materials of products and printing condition, the printing quality can be kept well even for the product with small curved surface. 4. The attached alphabet mold base uses the design of dovetail fast orientation, it is replaced very fast (no more one-minute). 5. The operation speed can be assured to run with 120 cycles/min. Intermittently, or 135 cycles/min. Continuously. Specifications:1. Power supply: 100 - 240v ac, 47 - 63hz, 1.9amp2. Dimension (l x w x h): 452 x 220 x 355 mm3. Ink: uv ink, oven-heat ink4. Minimum marking dimension: height 0.7mm5. Marking area: standard 20 x 20 mm6. Marking speed: continuous: 135 cycles / min; intermittent: 120 cycles / min7. Weight: 21 kg8. Height adjustment range: 25.5100 mm