Industrial Ovens & Furnaces #1802199

Muffle furnaces for laboratory use with Temperature range upto 1800C. As required, we provide both standard and customized muffle furnace systems to our customers worldwide. These laboratory muffle furnace units are utilized in general purpose heating in laboratories, ashing tests on wool, rubber, fibers or fabrics, heat treatment requirements for gears and various research facilities in chemistry and physics.

• The temperature control unit consists micro-processor based PID controller cum indicator. benefits of using PID controller:
  • Processing speed is high
  • Provides flexibility to alter the system by changing software.
  • Compact in size.
  • Operation and maintenance easier.
  • Maintain precise values
• Door options available:
• Flap door
• Lift door
• Front opening door
• Available with temperature ranges: 900-1800C
• Heating elements are embedded in the ceramic wall (ONLY UPTO TEMPERATURE OF 1200C)
• Exhaust air outlet at rear wall of the furnace.
• Solid state relays provided for low noise protection.
• Over temperature limiter.
• PCRC sheet body - Powder coated steel body assures corrosion resistant furnace and allows working of chamber at high temperature applications.
• Digital output Target and Performance Output of the furnace operations are in digital format(digits) giving precise reading.
• Precise Control of Environmental Parameters-The set/ programmable parameters of thefurnace are precise or have less deviation from original value, thus ensuring correct measurement.
• Aesthetically designed-Designed according to the standards and principles underlining industrys aesthetic values.
• Corrosion Resistant interior and exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the furnace to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
• Sturdy Construction-WEIBERfurnaces are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.

Air-circulation chamber furnaces with temperature range up to 850 C, are mainly used for annealing, tempering, ageing, pre-heating, drying, shrinking, baking and testing. These air circulation chamber furnaces are available for maximum operating temperatures of 450 C, 600 C or 850 C and are perfectly suited for demanding processes. Due to their robust and solid design even heavy loads can be heat treated. These furnaces are suited for use with baskets, pallets, and mobile furnace racks. All furnaces are available with electric or gas heating.

• The temperature control unit consists micro-processor based PID controller cum indicator. benefits of using PID controller:
  • Processing speed is high
  • Provides flexibility to alter the system by changing software.
  • Compact in size.
  • Operation and maintenance easier.
  • Maintain precise values
• Range of temperatures 450 C, 600 C or 850 C.
• Over temperature protection.
• Swinging door hinged on the right.
• High-grade heating elements with long service life.
• High-grade insulation with Low energy consumption.
• Heating from bottom sides and top.
• PCRC sheet body - Powder coated steel body assures corrosion resistant furnace and allows working of chamber at high temperature applications.
• Digital output Target and Performance Output of the furnace operations are in digital format(digits) giving precise reading.
• Precise Control of Environmental Parameters-The set/ programmable parameters of thefurnace are precise or have less deviation from original value, thus ensuring correct measurement.
• Aesthetically designed-Designed according to the standards and principles underlining industrys aesthetic values.
• Corrosion Resistant interior and exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the furnace to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
• Sturdy Construction - WEIBER furnaces are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.

Ashing furnaces which are specifically designed for the use in laboratories. The wide range of standard models is supplemented by customized solutions. Generally, Ashing furnaces is for inorganic waste determination.

One of the most common applications for laboratory furnaces is to heat combustible samples in order to analysethe ash residue. As there is no single solution for all requirements, WEIBER offers a range of furnaces withcharacteristics tailored to ashing and burn-off applications. The range of Ashing furnaces is designedspecifically to provide optimum ashing conditions toensure complete combustion of the sample.

• The temperature control unit consists micro-processor based PID controller cum indicator. benefits of using PID controller:
  • Processing speed is high
  • Provides flexibility to alter the system by changing software.
  • Compact in size.
  • Operation and maintenance easier.
  • Maintain precise values
• Door options available:
• Flap door
• Lift door
• Front opening door
• Heating from 2 sides by ceramic heating plates.
• Air inlet and tall chimney give airflow of 5 to 6 changes per minute
• Over temperature protection.
• Solid state relays provided for low noise operation
• Low chamber height holds airflow close to samples for optimum combustion.
• Preheating of air before it enters the chamber gives maximum uniformity.
• Large flow areas allow large number of samples.
• Sample tray and holding handle.
• PCRC sheet body - Powder coated steel body assures corrosion resistant furnace and allows working of chamber at high temperature applications.
• Digital output Target and Performance Output of the furnace operations are in digital format(digits) giving precise reading.
• Precise Control of Environmental Parameters-The set/ programmable parameters of thefurnace are precise or have less deviation from original value, thus ensuring correct measurement.
• Aesthetically designed-Designed according to the standards and principles underlining industrys aesthetic values.
• Corrosion Resistant interior and exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the furnace to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
• Sturdy Construction - WEIBER furnaces are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.

Compact melting furnaces for the melting of non-ferrous metals and alloys are one of a kind and have anumber of technical advantages. Designed as tabletop models, they can be used for many laboratory applications.

The practical counter balanced hinge with shock absorbers and the spout on the front of the furnacemake exact dosing easy when pouring the melt. The furnaces are available for furnace chamber temperatures of 1200C. However we have the capacity to customize the furnace temperature and sizes as per individual requirement.

• The temperature control unit consists micro-processor based PID controller cum indicator. benefits of using PID controller:
  • Processing speed is high
  • Provides flexibility to alter the system by changing software.
  • Compact in size.
  • Operation and maintenance easier.
  • Maintain precise values
• Maximum temperatures of 1200C with melt temperatures of about 80-110C lower.
• Crucible with integrated pouring spout of iso graphite included.
• Compact benchtop design.
• Over temperature protection.
• Simple emptying of crucible by titling system with gas damper.
• Insulated with a hinged lid.
• Observation hole for melt.
• PCRC sheet body - Powder coated steel body assures corrosion resistant furnace and allows working of chamber at high temperature applications.
• Digital output Target and Performance Output of the furnace operations are in digital format(digits) giving precise reading.
• Precise Control of Environmental Parameters-The set/ programmable parameters of thefurnace are precise or have less deviation from original value, thus ensuring correct measurement.
• Aesthetically designed-Designed according to the standards and principles underlining industrys aesthetic values.
• Corrosion Resistant interior and exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the furnace to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
• Sturdy Construction - WEIBER furnaces are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.

The high temperature furnace ranges comprises of temperatures 1700C and 1800C. Our furnaces meet the highest standards for quality, energy efficiency, and performance. Standard as well as customized solutions are available to meet the requirement of different individuals.

• High quality molybdenum silicide heating element.
• The temperature control unit consists micro-processor based PID controller cum indicator. benefits of using PID controller:
  • Processing speed is high
  • Provides flexibility to alter the system by changing software.
  • Compact in size.
  • Operation and maintenance easier.
  • Maintain precise values
• Over temperature protection.
• PCRC sheet body - Powder coated steel body assures corrosion resistant furnace and allows working of chamber at high temperature applications.
• Digital output Target and Performance Output of the furnace operations are in digital format(digits) giving precise reading.
• Precise Control of Environmental Parameters-The set/ programmable parameters of thefurnace are precise or have less deviation from original value, thus ensuring correct measurement.
• Aesthetically designed-Designed according to the standards and principles underlining industrys aesthetic values.
• Corrosion Resistant interior and exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the furnace to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
• Sturdy Construction-WEIBERfurnaces are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.

WEIBER provides various standards as well as customized horizontal retort furnaces for a number of industries, suitable for processes where a controlled or protective atmosphere is necessary. These models can also be laid out for heat treatment under vacuum up to 1100 C. The furnace chamber consists of a gas tight retort with water cooling around the door to protect the special sealing. Equipped with the corresponding safety technology, retort furnaces are also suitable for applications under reaction gases, such as hydrogen or, in combination with the IDB package, for inert de-binding or for pyrolysis processes.

• Outside heating with heating elements surrounding the retort
• Additional door heater
• Compact housing in frame design with removable stainless steel sheets
• Welded charging supports in the retort or air-baffle box in the furnace with air circulation
• Swivel door hinged on right side with open cooling water system
• Port for vacuum pump for cold evacuation
• The temperature control unit consists micro-processor based PID controller cum indicator. benefits of using PID controller:
  • Processing speed is high
  • Provides flexibility to alter the system by changing software.
  • Compact in size.
  • Operation and maintenance easier.
  • Maintain precise values
• Over temperature limiter.
• PCRC sheet body - Powder coated steel body assures corrosion resistant furnace and allows working of chamber at high temperature applications.
• Digital output Target and Performance Output of the furnace operations are in digital format(digits) giving precise reading.
• Precise Control of Environmental Parameters-The set/ programmable parameters of thefurnace are precise or have less deviation from original value, thus ensuring correct measurement.
• Aesthetically designed-Designed according to the standards and principles underlining industrys aesthetic values.
• Corrosion Resistant interior and exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the furnace to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
• Sturdy Construction-WEIBERfurnaces are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.

Vacuum resistance furnace is widely used in the heat treatment of metallic material in coarse vacuum, in reducibility or protective atmosphere. It Can also be used for special heat treatment of materials such as carbon products in the development process of carbonation. It can heat materials, typically metals, to very high temperatures and carry out processes such as brazing, sintering and heat treatmentwith high consistency and low contamination. In a vacuum furnace the product in the furnace is surrounded by a vacuum. The absence of air or other gases prevents heat transfer with the product through convection and removes a source of contamination.

Weiber designs and manufactures advanced vacuum furnaces with the highest quality standards in a wide range of geometries and dimensions. The Furnace are designed to meet temperature & vacuum atmosphere requirements.

• Uniform temperatures in the range 11001500C (20002800F)
• Low contamination of the product by carbon, oxygen and other gases
• Quick cooling (quenching) of product.
• The temperature control unit consists micro-processor based PID controller cum indicator. benefits of using PID controller:
• Processing speed is high
• Provides flexibility to alter the system by changing software.
• Compact in size.
• Operation and maintenance easier.
• Maintain precise values
• Over temperature limiter.
• Programmable Vacuum automatically control the vacuum on/off according to the user-defined value of temperature (vacuum start & stop temperature) and time (vacuum holding time).
• PCRC Sheet Body- Powder coated steel body assures corrosion resistant furnace and allows working of chamber at high temperature applications.
• Digital Output Target and Performance Output of the furnace operations are in digital format(digits) giving precise reading.
• Precise Control of Environmental Parameters-The set/ programmable parameters of thefurnace are precise or have less deviation from original value, thus ensuring correct measurement.
• Aesthetically Designed-Designed according to the standards and principles underlining industrys aesthetic values.
• Corrosion Resistant Interior and Exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the furnace to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
• Sturdy Construction-WEIBERfurnaces are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.

Tube furnaces are designed to carry out various chemical processes under high temperature controlled condition. The Tube Furnace facilitates more sophisticated metallurgical applications. Weiber offers Single Zone to multiple zone Tube furnaces can maintain high temperature value up to 1800C.