Our Products
Our Complete range of products are Rotary Bottle Washing Machine, Linear Bottle Washing Machine, Automatic Linear Bottle Washing Machine, Bottle Inspection Machine and Bottle Vacuum Cleaning Machine.
| Model | ARBW-64 | ARBW-100 |
| Production Rate | 40 to 60 Bottles/Minute | 60 to 100 Bottles/Minute |
| Direction of movement | Clockwise | Clockwise |
| Input Specification: | - | - |
| Round Shape | - | - |
| Diameter | 30mm to 100mm | 30mm to 80mm |
| Height | 50mm to 270mm | 50mm to 270mm |
| Square Shape | - | - |
| Length | 30mm to 100mm | 30mm to 80mm |
| Width | 10mm to 50mm | 10mm to 50mm |
| Height | 58mm to 190mm | 58mm to 190mm |
| Power Specification: | = | - |
| Main Motor | 0.5 H.P. | 0.5 H.P. |
| Pumps | 1 H.P. x 2 = 2 H.P. | 1 H.P. x 2 = 2 H.P. |
| Electric Heater | 3 K.W. | 3 K.W. |
| Electrical Characteristics: | 440 Volts, 3 Phase, 50 Hertz, 4 Wire System | 440 Volts, 3 Phase, 50 Hertz, 4 Wire System |
| Air Pressure Required: | 6 bar@5 CFM | 6 bar@5 CFM |
| Tank Capacity: | 75 Liters, SS 304 (2 Nos.) | 75 Liters, SS 304 (2 Nos.) |
| Water Cycle: | 4 Inner + 1 Outer | 4 Inner + 1 Outer |
| Working Height: | 850mm to 900mm | 850mm to 900mm |
| Change Parts: | (A) Neck Diameter: Bottle holding pocket. | (A) Neck Diameter: Bottle holding pocket. |
| - | (B) Flat Container: Special type of cup. | (B) Flat Container: Special type of cup. |
| Overall Dimension: | 1500mm (L) x 1750mm (W) x 1300mm (H) | 1500mm (L) x 1750mm (W) x 1300mm (H) |
Automatic Linear Bottle Washing Machine is suitable to wash glass bottles. Machine equipped with six washing stations can be interchangeable as per specific customers requirements. This Linear Bottle Washer provides 3 water wash & 3 air wash for positive & pressurizing washes of bottles. All contact parts made from stainless steel 316 and non-contact parts made from stainless steel 304 materials. Bottle invert into neck down position and nozzles enters into bottle during washing cycle to meet GMP requirements. Automatic Linear Bottle Washing Machine is ideal and economic choice for online Sterile Vial Filling Line. Machine is having uses in Pharmaceutical, Cosmetic, Food, Chemical & allied industries.
Salient Features
Process Operation
Containers feed from the de-cartooning station are received on an In feed turn table. An in feed worm inverts container to neck down position and feeds them through a specially designed indexing device. The device carries the container forward and stops. Nozzles carrier enters into the container and activities the jet of water/air. The air/water flow is deactivated after the washing cycle is over. Device indexes the vials/bottles for next wash. A separate pumping station gives the right quantum of water at the desired pressure. Washed containers are again inverted to neck upward position to collect in out-feed tray/directly feed to tunnel.
Washing Cycle
1st washRecycled Water
2nd washPurified Air
3rd washDM water
4th washDM water
5th washPurified Air
6th washDistilled Water (WFI)
| Model | ALBW-50 | ALBW-100 |
| Production Rate | 30 to 50 Containers/Minute | 50 to 100 Containers/Minute |
| Input Specification (Container Diameter) | 25mm to 70mm | 25mm to 70mm |
| Power Specification | - | - |
| Main Machine | 0.75 H.P. | 1.50 H.P. |
| Pumping Station | 2.25 H.P. | 2.25 H.P. |
| Loading Platform | 0.25 H.P. | 0.25 H.P. |
| Electrical Characteristics | 440 Volts, 3 Phase, 50 Hertz, 4 Wire System | 440 Volts, 3 Phase, 50 Hertz, 4 Wire System |
| Optional Accessories: | Pumping Station | Pumping Station |
| - | Inspection Station | Inspection Station |
| - | Loading Platform | Loading Platform |
| - | Programmable Logic Control with GUI | Programmable Logic Control with GUI |
| Input Utilities: | - | - |
| Fresh Water | 5 Liters / Minute | 10 Liters / Minute |
| DM water | 10 Liters / Minute | 20 Liters / Minute |
| WFI water | 5 Liters / Minute | 10 Liters / Minute |
| Air | 30 CFM@5 Bar | 30 CFM@5 Bar |
| Change Parts | Infeed Worm, Infeed Star wheel | Infeed Worm, Infeed Star wheel |
| - | Infeed Inverter, Exit Feed Worm | Infeed Inverter, Exit Feed Worm |
| - | Exit Star wheel, Exit Inverter | Exit Star wheel, Exit Inverter |
| Overall Dimension: | 2300mm x 850mm x 915mm | 2300mm x 1000mm x 915mm |
utomatic Liquid Bottle Filling machineis a most widely used machine in the pharmaceutical industry. The machine also finds application in Food, Chemical & allied industry. The monoblock design saves space since filling and Screw/ROPP capping modules are built on the same base and the common drive for filling & sealing modules. The filling principle is volumetric, positive displacement of product with piston & cylinder arrangements. Another highlight of this Rotary filler is all the pistons can be set for different volumes by setting the twin cams tracks. Finer volume adjustment of individual cylinders is also built on the cams track rollers.
