Dubai, United Arab Emirates
Write a Review
Our Products
Our offered Product range includes Nozzle Holder and FGR FLEX /FLEX E pipe couplings.
A sleeve type coupling that is secured to the hose with wood screws and have the same features as the sandblast hose end. The exception is that the hose end of the nozzle holder is NPT threaded to accept the sandblasting nozzle.
DescriptionSandblast Nozzle Holder General Uses
Design of Sandblast Nozzle holder is to slip over sandblast hose and to be fastened with screws. Such an external coupling prevents restriction of flow and prevents coupling wear out from the high velocity of sand.
Limitations:
Since these fittings attach to the outside of the hose, use them only with sandblast hose. Therefore take special care not to let the screws penetrate the hose tube.
Warning:
Use these fittings with sandblast hose only!
FeaturesWe supply Sandblast Quick Couplings with screws.
InstallationCut ends of hose square to fit snug against metal end.
Holding hose tight to end of fitting, insert screws and turn in full, putting screw 180 from first to ensure best centering.
After all screws have been placed, finally check tube opposite screws to be sure screws have not penetrated completely through.
On quick couplings, insert safety clips.
FGR FLEX /FLEX E pipe couplings are used for connecting restrained pipes, metal pipes, stainless pipes, as well as concrete and plastic pipes. With FGR Flex/FlexE pipe couplings sealing reliability is also ensured when there are gaps between pipe ends which are compensated. Given outside pipe diameters of > 180 mm the FLEX type is suitable for high pressure and the FLEX E type for low pressure applications.Flex E coupling is used for connectiong restrained pipes, metal pipes, stainless pipes, as well as concrete and plastic pipes. This is a hollow trunnions version.
DescriptionUse FGR FLEX /FLEX E pipe couplings for connecting restrained pipes, metal pipes, stainless pipes, also concrete and plastic pipes. With FGR Flex or FlexE pipe couplings sealing ensures also reliability when there are gaps between compensated. Given outside pipe diameters of > 180 mm the FLEX type suits for high pressure and the FLEX E type for low pressure applications. Use Flex E coupling for connecting restrained pipes, metal pipes, stainless pipes, as well as concrete and plastic pipes. This is a hollow trunnions version.
AdvantagesCompensation of pipe gaps allows thermal elongation of the pipes.
Also joining all kind of pipe materials is possible, e.g., for steel, plastic, cast iron, etc.
FGR Pipe Coupling are economical alternative to conventional pipe joining techniques for both plastic and metal pipes. Join all plain ended pipes easily by hand. Push over the pipe ends the ready-to-fit coupling, and then align and rotate to any fitting position. Tightening the two bolts alternately with a torque wrench is all it takes to make a safe fitting.
FGR Pipe Coupling is a reliable connection for thick- and thin- and walled pipes which conforms to the latest DIN standard 86128. Join quickly, easily, and safely feed and return lines for liquids, gases, and solids (for mechanical engineering and construction, civil engineering, shipbuilding, pipeline construction, power stations, mining, filters, water technology, etc.).
Centre Point Hydraulic (Centre Point Hydraulic)Dubai Investment Park 1, Dubai, United Arab Emirates, 171427, United Arab Emirates
Share us via
