This test is used to determine the elapsed time between batching of a concrete sample and when it is deemed by standard methods to have set. The method involves measuring the penetration resistance of a test sample, which has had coarse particles removed at periodic intervals....
Introduction This test is used to determine the elapsed time between batching of a concrete sample and when it is deemed by standard methods to have set. The method involves measuring the penetration resistance of a test sample, which has had...
Introduction Hand operated With Automatic Timer Hand Operated : The apparatus consist of a cast aluminium base with an iron stand on which moves an aluminium arm. A 6" dial is fixed on this arm and a brass chromium plated rod slide through the lower...
It will consist of metallic cone with half angle of 15' -30 ±15' and 30.50mm coned length. It will be fixed at the end of a metallic rod with a disc at the top of the rod so as to have a total sliding weight of 148± 0.5 gms. The total rod shall...
Hand operated With Automatic Timer Hand Operated : The apparatus consist of a cast aluminium base with an iron stand on which moves an aluminium arm. A 6" dial is fixed on this arm and a brass chromium plated rod slide through the lower portion of...
Compliance Standards ASTM D5, ASTM D217, ASTM D937, ASTM D1321, AASTHO T-49, IP 50, IP 49, IP 179 Applications Needle Penetration of Bituminous Materials ASTM D5; IP 49; DIN 52010 Cone Penetration of Lubricating Grease ASTM D217; IP 50; ISO 2137;...
Proctor Penetrometer (AIM 164) Ref Std :ASTM D 1558 Compaction control in the field is exercised by determining the moisture content & dry density. Quick evaluation of this is done by developing curves in the laboratory, showing the relationship...
Pavement Dynamic Cone Penetrometer (AIM 567) The Pavement Dynamic Cone Penetrometer (DCP) is a very robust instrument, designed for rapid in-situ evaluation of strength of sub- grade and the bases for roads & runway pavements. Continuous...
Cone Penetrometer (AIM 042-2) Ref Stds : 2720 (Part 5), BS 1377 Enables the determination of liquid limit simply and quickly. The unit is supplied complete with a stainless steel penetration test cone 35 mm long with smooth polished surface...
This test is used to determine the elapsed time between batching of a concrete sample and when it is deemed by standard methods to have set. The method involves measuring the penetration resistance of a test sample, which has had coarse particles...
Compliance Standards ASTM D5, ASTM D217, ASTM D937, ASTM D1321, AASTHO T-49, IP 50, IP 49, IP 179 Applications Needle Penetration of Bituminous Materials ASTM D5; IP 49; DIN 52010 Cone Penetration of Lubricating Grease ASTM D217; IP 50; ISO 2137;...
Hand operated With Automatic Timer Hand Operated : The apparatus consist of a cast aluminium base with an iron stand on which moves an aluminium arm. A 6" dial is fixed on this arm and a brass chromium plated rod slide through the lower portion of...
It will consist of metallic cone with half angle of 15' -30 ±15' and 30.50mm coned length. It will be fixed at the end of a metallic rod with a disc at the top of the rod so as to have a total sliding weight of 148± 0.5 gms. The total rod shall...
Used to determine grade of bitumen. The penetration tests determine consistency of bitumen for the purpose of grading. Depth in units 1/10 of millimeter to which a standard needle having a standard weight will penetrate vertically in a duration of...
We are offering standard penetrometer. As per is 1448(p-92), is 1448(p-93), is 7401 ip 49 & 50, ip-179, ip-376, astmd 1321, astm d 937 this apparatus is used for penetration test on a wide variety of materials such as grease, petroleum, bitumen, tar, wax, olish, foodstuff,...
For Buyer 
For Seller 
Help 
