The CP40II Cone Penetrometer creates a new parallel between ease of use and superb accuracy. This compact instrument is the world’s best handheld tool for soil surveys involving compaction, trafficability and moisture distribution. Ultrasonic...
How many Penetrometer product listings are available in Delhi?
In Delhi, there are currently 56 Penetrometer products listed, offering a wide options available for purchase.
Where can I find a Penetrometer near Delhi?
You can find Penetrometers around Delhi, such as Sadar Bazar, Anand Parbat, Burari, Malka Ganj, Samaypur. You can also use ExportersIndia to search for Penetrometer suppliers in Delhi.
What are some related categories to the Penetrometer in Delhi?
Some related categories to Penetrometer in Delhi include Soil Permeability Apparatus, California Bearing Ratio Apparatus, Soil Testing Kit, Direct Shear Apparatus, Swell Testing Apparatus, Reynolds Apparatus, Sand Pouring Cylinder, Liquid Limit Apparatus, Soil Testing Equipment, Soil Analyzer Kit, Cone Penetrometer, CBR Testing Machine, Softening Point Apparatus, Bitumen Penetrometer, Plate Load Test Equipment, Triaxial Test System.
How many Delhi-based Penetrometer manufacturers are there?
There are many Penetrometer manufacturers in Delhi. You can explore ExportersIndia to find them and use filters to your search as per your specific requirements.
How many trusted sellers are available for Penetrometer in Delhi?
Trusted sellers for Penetrometer in Delhi include:
We are offering concrete penetrometer. Compaction control in the concrete can be achieved by determining the moisture content & maximum dry density. A rapid estimate of the moisture content in the field can be obtained by plotting curves in the laboratory, showing relationship...
Our organization is open to accept payment for an order through online or offline mediums. We provide patrons with the payment period, details, and other terms & conditions in the invoice. To pack our products, we have ultramodern machines. The...
For reaching greater depths and to facilitate easy and constant rate of penetration of the cone, this engine-driven Static Cone Penetrometer of 100 kN (10, 000 kgf) capacity is preferable. The equipment consists of a hydraulic pump driven by a...
The test is based on the relationship between moisture content and the penetration of the cone into the soil sample. The moisture content at a given depth of penetration of the cone is taken as the liquid limit. As an inferential test, empirical correlations have been developed...
This apparatus is used for penetration on a wide variety of material such as greases petroleum, bitumen tar wax and polish. It consists of Timer (for setting the number of fall of needle ) head support mounted on a vertical rod, which can be...
IS: 2720 (Part 5) - 1985 The test is based on the relationship between moisture content and the penetration of the cone into the soil sample. The moisture content at a given depth of penetration of the cone is taken as the liquid limit. As an...
It consists of a vertical pillar mounted on a base, the head, together with diameter plunger rod and cone (or needle) slides on a pillar and can be clamped at any desired height. The dial is graduated in 400 110 and the millimeter subdivisions...
For testing penetration in grease creams. It consists of a vertical pillar mounted on a base, the head, together with diameter plunger rod and cone (or needle) slides on a pillar and can be clamped at any desired height. The dial is graduated in 400...
We are a trustworthy Manufacturer, Exporter and Supplier of Bitumen Penetrometer . The Bitumen Standard Penetrometer, offered by us, encompasses a base with the head support that mounted on a vertical rod for adjustment of height. Plus, the dial is...
We are a top-notch Manufacturer, Exporter and Supplier of Proving Ring Penetrometer from Delhi, India. The Proving Ring Penetrometer is comprehensively demanded to determine the bearing capacity of the soil. The Proving Ring Penetrometer that we...
We are offering cone penetrometer for soil testing. It consist of unit with one meter scale fit on it , spare rod, cone & weight about 8kg . The instrument are nicely pack in wooden box. for more detail , please send your valued enquiry....
As per IP 49, 50 & 167 specifications and also per is 1448 (p: 60) & (p: 93) this apparatus is used for penetration test on a wide variety of materials. It consists of a head support mounted on a vertical rod which can be adjusted for height. A rack...
This instrument is used to estimate approximate unconfined compressive strength and the estimation for shear strength of soil. Cohesive soils can also be classified in terms of consistency using this penetrometer. This is a handy and convenient...
This is identical to above, except that the penetration pressure on the needle is conveyed through a hydraulic system to a hydraulic pressure gauge. This system permits a greater control over rate of penetration because of better visibility of load...
Automatic Digital Bitumen Penetrometer-VSLIC4038 The Automatic Electronic Penetrometer is used for determination of the needle penetration according to EN 1426, ASTM D5 and AASHTO T49 standards. The penetration depth of the needle is determined with...
he Semi-Automatic Penetrometer for Liquid Limit consists of a cast iron base with course and fine leveling screws, a digital penetration measurement gauge 0.01 mm resolution/readability and an automatic penetration timer unit. The is equipped with a...
Digital Penetrometer method has several advantages over the Casagrande method. It is easier to perform this test and the results are not so dependent on the design of the apparatus or the judgement of the operator. It is applicable to a wider range...
The Static Cone Penetration Test is also found to be a handy tool for predetermining the length and estimating the load carrying capacities of piles passing through soft compressible strata and resting upon hard clays, sands or gravel. The...
Compaction control in the field is exercised by determining the moisture content and dry density. Quick evaluation of this is done by developing curves in the laboratory, showing the relationship between moisture content versus dry density and...
The unit is compact with in-built timer to control duration of penetration presetted in factory to 5 seconds. The instrument is provided with leveling screws. Product Code : EKE 512-2....
This test is used to determine the elapsed time between batching of a concrete sample and when it is deemed by standard methods to have set. The method involves measuring the penetration resistance of a test sample, which has had coarse particles...
It will consist of metallic cone with half angle of 15' -30 ±15' and 30.50mm coned length. It will be fixed at the end of a metallic rod with a disc at the top of the rod so as to have a total sliding weight of 148± 0.5 gms. The total rod shall...
The apparatus consist of a cast aluminum base with an iron stand on which moves an aluminum arm. A 6" dial is fixed on this arm and a brass chromium plated rod slide through the lower portion of the arm. A needle with weights is fitted to this rod....
It is used for finding out the rate of hardening of mortar sieved from concrete spring and a stem graduated from 0-70 kg x 1 kg. Six interchangeable penetration needles of areas 645, 323, 65 32 and 16 mm sq. is provided . The penetration resistance...
Consists of a needle having face area 3/10 sq. cm. and graduated at a distance of 25 cm. The needles point is an integral part of barrel which houses a calibrated spring. The spring is confined in a sleeve. The resistance offered by the concrete...
For determining the liquid limit of soils. This is specially useful to obtain reliable and accurate results of those soil which have low plasticity index. The percentage moisture contents determined when cone with half angle of 15-30 minutes under a...
We have invested a large amount for developing all-the-in-house storage facility that is managed and maintained by our diligent professionals. Also, it keeps us free from stock-out situations. Buyers can approach us, if looking for obtaining...
Proctor Penetrometer, Spring Type, 0-40 kg x 1 The instrument consists of a needle attached to a spring loaded plunger, the stem of which is calibrated to read 0 to 40 kg division. Long stem is graduated at every 12.5mm to read depth of penetration...
Available in two options as follows Cone Penetrometer, Automatic The unit is supplied complete with a stainless steel penetration test cone 35 mm long with a smooth polished surface and an angle of 30°. Facility exists for adjusting cone height in...
The unit is supplied complete with a stainless steel penetration test cone 35 mm long with a smooth polished surface and an angle of 30°. Facility exists for adjusting cone height in relation to the specimen. Cone Penetrometer consists of one each...