AIRMASTER

Ambattur, Chennai, Tamil Nadu

Extruded aluminium double deflection grille with aerofoil adjustable front and rear blades. Collar damper available as accessory for supply air. The frame and blades are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Grilles have two sets parallel aerofoil blades with one set mounted horizontally on the front and other set vertically at the rear. Frame is separated from aerofoil deflection blades by nylon bushings. This method of assembly ensures quiet, smooth and rattle free operation. Deflection blades can be adjusted manually and individually, to provide air deflection in both horizontal and vertical planes. Grilles are rigidly fixed with opposed blade damper by grippers. Damper blade is gear operated from the face opening. Length from 0.2 meter to 3.6 meter is available as single piece. Listed Width in mm 100, 150, 200, 250, 300 mm. Non standard sizes available as option.

Extruded Aluminium Double Deflection Linear Bar Grille with Fixed 0/15/30 Deg Bar at Front and Aerofoil Adjustable Rear Blades. Collar Damper available as accessory for Supply Air Frame and face bars are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Horizontal face bars with 0, 15-1 way throw and 15-2 way throw are fixed rigidly to the frame with round aluminium pipes. Vertical aluminium aerofoil blades are fixed at the rear side of the frame by nylon bushes. These blades can be adjusted manually and individually in the vertical plane to obtain optimum air distribution. Grilles are fixed rigidly with an opposed blade damper by rivets. Damper blades can be gear operated from the face opening of the grille. For perfect unbroken appearance of continuous runs, alignment strips are provided as an option. Total structure is manufactured by mechanical assembly, assuring rigidity and to maintain straight line appearance. The frame is constructed with 45o corners and mechanically reinforced with corner cleats for rigidity and aesthetics. Length from 0.2 meter to 3.6 meter is available as single piece. Listed Width in mm 75, 100, 150, 200, 250, 300 mm. Non standard sizes available as option.

Extruded Aluminium Single Deflection Grille with Aerofoil Adjustable Blades. Horizontal and Vertical orientations can be made. Collar Damper available as an accessory for Supply Air. The frame and blades are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Frame is separated from the aerofoil deflection blades with nylon bushings. This method of assembly assures quiet, smooth and rattle free operation. Deflection blades can be adjusted manually and individually in the horizontal or vertical plane to obtain optimum air distribution. The frame is constructed with 45o corners and mechanically reinforced with corner cleats for rigidity and aesthetics. Maximum effective pressure areas can be achieved when the blades are positioned at 0 horizontal position. Length from 0.2 meter to 3.6 meter is available as single piece. Listed Width in mm 100, 150, 200, 250, 300 mm. Non standard sizes available as an option.

Extruded Aluminium Linear Bar Grille with fixed Aerofoil Blades available in 0/15/30/45 degree deflection with rigid frame of 16mm flange as standard. Collar Damper available as accessory for Supply Air. Frame and face bars are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Horizontal face bars with 0/15/30/45 1 way or two way throw are fixed rigidly to the frame with round aluminium pipes. Grilles are fixed rigidly with opposed blade damper by rivets. This ensures positive control over the air stream. Damper blades can be gear operated from the face opening. For perfect unbroken appearance of continuous runs, alignment strips are provided as an option. Total structure is manufactured by mechanical assembly, assuring rigidity and to maintain straight line appearance. The frame is constructed with 45o corners and mechanically reinforced with corner cleats for rigidity and aesthetics. Length from 0.2 meter to 3.6 meter is available as single piece. Listed Width in mm 75, 100, 150, 200, 250, 300 mm. Non standard sizes available as option.

Extruded Aluminium Linear Bar Grille with fixed Aerofoil Blades available in 0/15/30/45 degree deflection with rigid frame of 16mm flange as standard. Radius of curvature is made suitable to round ducts. Collar Damper available as accessory for Supply Air. Frame and face bars are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Horizontal face bars with 0, 15-1 way throw and 15-2 way throw, 30 are fixed rigidly to the frame with 6 mm pipes. Grilles are fixed rigidly with opposed blade damper by grippers. This ensures positive control over the air stream. Damper blades can be gear operated from the face opening. Total structure is manufactured by mechanical assembly, assuring rigidity and to maintain straight line appearance.

Extruded Aluminium Linear Bar Grille with fixed Aerofoil Blades available in 0/15/30 degree deflection with rigid frame of 16mm flange as standard. Frame has 8 mm step suitable to tegular/grid type false ceilings. Collar Damper available as accessory for Supply Air. Frame and face bars are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Horizontal face bars with 0, 15-1 way throw and 15-2 way throw, 30 are fixed rigidly to the frame with 6 mm pipes. Grilles are fixed rigidly with opposed blade damper by grippers. This ensures positive control over the air stream. Damper blades can be gear operated from the face opening. Total structure is manufactured by mechanical assembly, assuring rigidity and to maintain straight line appearance. The frame is constructed with 45o corners and mechanically reinforced with corner cleats for rigidity and aesthetics. Width made to suit standards of various grid/techzone false ceiling systems.

Extruded Aluminium Linear Bar Floor Grille fixed with Heavy Duty Aerofoil Blades 5 mm thick, 0 degree deflection with rigid heavy duty frame of 25 mm flange as standard. Collar Damper available as accessory for Supply Air. Suitable for standard floor tile replacement. Frame and face bars are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity Structure is robustly constructed with face bars positioned in the frame. Face bars assembly is reinforced with steel rods to withstand heavy loads. Applicable for installation in gymnasium, sport halls, hospitals and computer rooms, sever rooms and data centres. A recess of 25 mm x 4 mm has to be provided around the grille, in the floor to install the grill flush with the floor (or) carpet level for carpeted floors. In case of raised floors, it can be installed as tile replacement. Grilles are fixed rigidly with opposed blade damper by rivets. This ensures positive control over the air stream. Damper blades can be gear operated from the face opening. Alternately, slotted Hit and miss damper can be provided on request. Total structure is manufactured by mechanical assembly, assuring rigidity and to maintain straight line appearance. Custom sizes can be made on request.

Heavy duty floor perforated floor grille made of 3mm thick mild steel plate as standard welded with supporting frame for high load capacity and rigidity. Collar Damper available as accessory for Supply Air. Suitable for standard floor tile replacement. Frame and face plate are made of high quality cold rolled cold annealed steel construction with corrosion resistance powder coating. Structure is robustly constructed and welded with supporting bars positioned in the frame. Applicable for installation in gymnasium, sport halls, hospitals, computer rooms, sever rooms and data centres. A recess has to be provided around the grille, in the floor to install the grill flush with the floor (or) carpet level for carpeted floors. In case of raised floors, it can be installed as tile replacement. Perforation size is 6mm diameter as standard. Design can be custom made to suit required flow output. Grilles are fixed rigidly with opposed blade damper by rivets. This ensures positive control over the air stream. Damper blades can be gear operated by lifting the grille from the floor. Alternately, slotted Hit and miss damper can be provided on request. Total structure is manufactured by mechanical assembly, assuring rigidity and to maintain flat and level appearance. Custom sizes can be made on request.

Heavy duty floor cooling panel made of 3mm thick mild steel as standard welded with supporting frame for high load capacity and rigidity. Collar Damper available as accessory for Supply Air. Suitable for standard floor tile replacement. Frame and face plate are made of high quality cold rolled cold annealed steel construction with corrosion resistance powder coating. Structure is robustly constructed and welded with supporting bars positioned in the frame. Applicable for installation in gymnasium, sport halls, hospitals and computer rooms, sever rooms and data centres. A recess has to be provided around the grille, in the floor to install the grill flush with the floor (or) carpet level for carpeted floors. In case of raised floors, it can be installed as tile replacement. Grilles are fixed rigidly with opposed blade damper by rivets. This ensures positive control over the air stream. Damper blades can be gear operated by lifting the grille from the floor. Alternately, slotted Hit and miss damper can be provided on request. Total structure is manufactured by mechanical assembly, assuring rigidity and to maintain flat and level appearance. Stainless steel floor grille available as option. Custom sizes can be made on request.

Extruded Aluminium Linear Bar Floor Grille fixed with Heavy Duty Aerofoil Blades 5 mm thick, 15 degree deflection with rigid heavy duty frame of 25 mm flange as standard. Suitable for fascade ventilation application. Frame and face bars are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Structure is robustly constructed with face bars positioned in the frame. Face bars assembly is reinforced with heavy duty aluminium structure to withstand heavy loads. Applicable for installation along the periphery for fascade ventilation. Blades have a 15 degree deflection to direct air towards the fascade face of the building. A recess of 25 mm x 4 mm has to be provided around the grille, in the floor to install the grill flush with the floor (or) carpet level. Grilles are fixed rigidly with opposed blade damper by rivets. This ensures positive control over the air stream. Damper blades can be gear operated from the face opening. Total structure is manufactured by mechanical assembly, assuring rigidity and to maintain straight line appearance. Custom sizes can be made on request.

Extruded Aluminium Egg Crate Grille with 12.5 x 12.5 mm grid and 16mm flange as standard. Collar damper available as accessory for supply air. Frame is constructed from high quality extruded aluminium profiles with the advantages of corrosion resistance and rigidity. Aluminium egg crate core of 12.5 mm x 12.5 mm x 12.5 mm size is fixed rigidly to the frame. Rigid construction provides noiseless performance. Designed for return and exhaust applications for conditioned space. More than 90% free area.

Extruded Aluminium Non Vision Door Grilles with Inverted V type blade to avoid see through vision and both side frame as standard which can be adjusted to varying door thicknesses. Frame and blades are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Inverted V type horizontal blades are fixed rigidly to the frame to avoid vibration and corrosion. Blades are spaced at a distance of 18-20 mm. Provided with a counter frame for fixing on both sides of the door. Frame is fabricated to suit door thickness of 25 mm to 50 mm. Structure provides around 70% free area for air transmission. Used in facilities such as offices, hospitals, schools and toilets for transfer of air from one room to another room.

Extruded aluminium square ceiling diffuser with one way throw, and extruded aluminium core which is spring loaded and removable. Different construction available for flush type and tegular ceilings. Collar damper available as accessory for supply air.

Extruded aluminium square ceiling diffuser with two way throw from centre, and extruded aluminium core which is spring loaded and removable. Different construction available for flush type and tegular ceilings. Collar damper available as accessory for supply air.

Extruded aluminium square ceiling diffuser with three way throw, and extruded aluminium core which is spring loaded and removable. Different construction available for flush type and tegular ceilings. Collar damper available as accessory for supply air.

Extruded aluminium square ceiling diffuser with four way throw, and stamped aluminium core which is spring loaded and removable. Different construction available for flush type and tegular ceilings. Collar damper available as accessory for supply air. The frame and blades are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Diffusers shall be coned type with each cone manufactured by extruded aluminium louvered profiles or one piece die formed aluminium construction arranged in concentric cones to deflect air equally in four directions. Louvered type core is fixed to the frame with aluminium pins loaded with steel springs. Core can be easily removable and interchangeable to allow for maximum flexibility in installation, maintenance and damper adjustment. Frame is made of plain (flush) type as standard, and can be made as tegular (stepped) type as option. Damper is fixed rigidly to the frame by aluminium rivets. Fixing by spring clips as option. Opposed blade damper is lever operated from the face opening of the diffuser after removing the internal core. Damper blades are separated from its frame by nylon bushes. Discharge air equally in four horizontal directions. Available in rectangular sizes as option. Suitable for flush mounting in lay in type ceiling.

Extruded aluminium square ceiling diffuser with four way throw, and plaque aluminium core which is spring loaded and removable. Different construction available for flush type and tegular ceilings. Collar damper available as accessory for supply air. The frame and blades are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Diffusers shall be plaque manufactured by aluminium sheets designed to deflect air equally in four directions. Plaque type core is fixed to the frame with aluminium pins loaded with steel springs. Core can be easily removable and interchangeable to allow for maximum flexibility in installation, maintenance and damper adjustment. Damper is fixed rigidly to the frame by aluminium rivets. Fixing by spring clips as option. Opposed blade damper is lever operated from the face opening of the diffuser after removing the internal core. Damper blades are separated from its frame by nylon bushes Discharge air equally in four horizontal directions. Available in rectangular sizes as option. Suitable for flush mounting in lay in type ceiling.

Extruded aluminium square ceiling diffuser with two way throw from corner, and extruded aluminium core which is spring loaded and removable. Different construction available for flush type and tegular ceilings. Collar damper available as accessory for supply air. The frame and blades are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Louvered type core is fixed to the frame with aluminium pins loaded with steel springs. Core can be easily removable and interchangeable to allow for maximum flexibility in installation, maintenance and damper adjustment. Damper is fixed rigidly to the frame by aluminium rivets. Fixing by spring clips as option. Opposed blade damper is lever operated from the face opening of the diffuser after removing the internal core. Damper blades are separated from its frame by nylon gears and bushes. Discharges air in one way, equally in X and Y direction. Suitable for flush mounting in lay in type ceiling.

Extruded aluminium rectangle ceiling diffuser with two way throw from centre, and extruded aluminium core which is spring loaded and removable. Different construction available for flush type and tegular ceilings. Collar damper available as accessory for supply air. The frame and blades are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Diffusers shall be coned type with each cone manufactured by extruded aluminium louvered profiles, arranged in concentric cones to deflect air equally in four directions. Damper is fixed rigidly to the frame by aluminium rivets. Fixing by spring clips as option. Opposed blade damper is lever operated from the face opening of the diffuser after removing the internal core. Damper blades are separated from its frame by nylon gears and bushes bushes. This product can be manufactured for one-way and two-way throws. Diffusers are available in rectangular sizes as per clients choice, with standard increments of 75 mm in listed size.

Extruded aluminium rectangle ceiling diffuser with four way throw, and extruded aluminium core which is spring loaded and removable. Different construction available for flush type and tegular ceilings. Collar damper available as accessory for supply air. The frame and blades are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Diffusers shall be coned type with each cone manufactured by extruded aluminium louvered profiles, arranged in concentric cones to deflect air equally in four directions. Damper is fixed rigidly to the frame by aluminium rivets. Fixing by spring clips as option. Opposed blade damper is lever operated from the face opening of the diffuser after removing the internal core. Damper blades are separated from its frame by nylon gears and bushes bushes. This product is manufactured in four way throws to deflect air in all four directions. Diffusers are available in rectangular sizes as per clients choice, with standard increments of 75mm in listed size.

Extruded aluminium rectangle ceiling diffuser with four way throw, and aluminium sheet plaque which is spring loaded and removable. Different construction available for flush type and tegular ceilings. Collar damper available as accessory for supply air. The frame and blades are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Diffusers shall be plaque type manufactured by aluminium sheets, designed to deflect air equally in four directions. Damper is fixed rigidly to the frame by aluminium rivets. Fixing by spring clips as option. Opposed blade damper is lever operated from the face opening of the diffuser after removing the internal core. Damper blades are separated from its frame by nylon gears and bushes bushes. Diffusers are available in rectangular sizes as per clients choice, with standard increments.

Extruded aluminium square ceiling step down diffuser with four way throw, and stamped aluminium core assembled in incremental steps which is spring loaded and removable. Different construction available for flush type and tegular ceilings. Collar damper available as accessory for supply air. Step Down is designed for high cfm requirements. The frame and blades are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Diffusers shall be coned type and stepped down incrementally, with each cone manufactured by extruded aluminium louvered profiles or one piece die formed aluminium sheet construction arranged in concentric cones to deflect air equally in four directions. The cones are arranged in incremental steps facing downwards to maximize the volume (cfm) of airflow while maintaining the flow directions. Louvered type core is fixed to the frame with aluminium pins loaded with steel springs. Core can be easily removable and interchangeable to allow for maximum flexibility in installation, maintenance and damper adjustment. Damper is fixed rigidly to the frame by aluminium rivets. Fixing by spring clips as option. Opposed blade damper is lever operated from the face opening of the diffuser after removing the internal core. Damper blades are separated from its frame by nylon bushes. Discharge air equally in four horizontal directions. Suitable for flush mounting in lay in type ceiling.

Extruded aluminium square ceiling anti smudge diffuser with four way throw, and stamped aluminium core assembled which is spring loaded and removable. Anti smudge diffuser is designed to prevent smudging of ceiling around the diffuser with dust particles over a period of time. Collar damper available as accessory for supply air. Step Down is designed for high cfm requirements. Outer cone design minimizes smudging by reducing the dust accumulation on the ceiling around the diffuser. The frame and core are of high quality stamped aluminium construction as standard or high quality extruded aluminium profiles as option with the advantages of corrosion resistance and rigidity. Louvered type core is fixed to the frame with aluminium pins loaded with steel springs. Complete inner core assembly can be easily removed to allow for maximum flexibility in installation, maintenance and damper adjustment. Damper is fixed rigidly to the frame by aluminium rivets. Fixing by spring clips as option. Opposed blade damper is lever operated from the face opening of the diffuser after removing the inner core. Damper blades are separated from the frame by nylon gears and bushes. Discharge air equally in four horizontal directions.

Frame and deflection blades are made of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Air distribution can be changed vertically or horizontally by means of deflection blades without changing the air flow rate. These blades can be fully adjusted from face opening. Air flow rate can be adjusted by fixing hit and miss damper at the rear side of the diffuser. Damper blades are adjusted from the face opening. Dampers are designed in a unique way that it can be used as an equalizing grid. Total structure is manufactured by mechanical assembly, assuring rigidity and to maintain straight line appearance. Positive alignment of adjacent sections can be made by using alignment strips. Suitable for installation for ceiling and sills. Standard slot opening width are 16mm, 20mm, 25mm and non-standard sizes available as option. Number of slots available: 1, 2, 3, 4, 5, 6, 7, 8. Length: Up to 3.6 m available in a single piece. Optional accessories: Plenum box either un-lined, internally insulated or externally insulated.

Specification: Extruded Aluminium Heavy Duty Flowbar Diffuser with hidden flange concealed in false ceiling, with side delfector and top deflector for adjusting air flow direction and capable of handling higher volumes of air. Air Master AFBD-3, SIDE-FLO model Flowbar Diffuser is specially designed for hidden flange application. Its enhanced performance coupled with special design that blends seamlessly into the ceiling makes it a fine choice for interior designers to suit contemporary architectural demands. It is designed for ceiling mounted applications. Side and center flange will remain invisible for both single and double slot opening. The view of a black opening into the ceiling gives a high-class finish to the building interiors. Flowbar Diffuser can easily handle huge air volumes per slot opening without increasing the pressure drop or NC level as compared to regular slot diffuser.

Aluminium round ceiling diffuser with circular cones for throw in circular pattern, and easily removable core. Butterfly damper available as accessory for excellent flow control for supply air. Frame and inner cones are constructed from high quality aluminium sheet. Inner cones fixed rigidly to the frame, and can be removed easily to access the butterfly damper, as well as for installation. The standard butterfly damper in supply diffuser can be easily adjusted through the face of the unit by means of screw drive or by means of a simple hook after removing the core. The diffuser can be used for ceiling or exposed duct mounting and has a fixed horizontal air pattern.

Aluminium round pan diffuser with plaque type core for throw in circular pattern, gives good aesthetics. The plaque type core and be rotated for adjustment to provide excellent flow control for supply air as well as return air. Frame and inner core are constructed from high quality aluminium sheet. Inner cones fixed rigidly to the frame, and can be rotated for adjustment or removed easily for installation. The diffuser can be used for ceiling or exposed duct mounting and has a fixed horizontal air pattern.

Aluminium Jet Diffuser made with circular rings is reversible for Jet Diffuser and Jet Nozzle action, and suitable for large volume of air output with long throw. Frame and inner rings are high quality aluminium construction with the advantages of corrosion resistance. Jet diffuser section is mounted in aluminium square plate or required size covered by flanged border as option Diffuser core can be adjusted 30 degrees upwards and downwards to achieve required throw as per site condition. Generally designed for wall mounting or ceiling mounting, drill 2 to 4 holes in the face of the flanged border. Jet diffusers are specially suitable to handle large quantity of air flow with long throw. Ideal for commercial use such as concert halls, theatres, exhibitions and sport halls. Jet diffusers can be supplied with plenum box, which is manufactured from galvanized steel sheet as option. Plenum boxes can be supplied with round duct damper at the spigot as option. Additionally, jet diffusers can be fixed on square panels for wall mounting with multiple orientations.

Aluminium Jet Nozzle with rotatable eye ball spout is used for spot cooling applications and delivers a powerful stream over long distances. Eyeball jet nozzles are highly suitable for delivering a powerful stream of air over long distances. Its ability to deliver an accurate airstream makes it ideal for spot cooling applications. Its angular movement allows the airstream to be delivered through a wide area of direction either in full jet position or in reduced jet position. This diffuser spout is fully reversible, rotating through 180 deg. The diffuser can be fixed directly to the round duct. The diffuser is suitable for long throw patterns with trajectory control. Gasket is sealed around the back of the spout to avoid air leakage as option.

Displacement diffusers are custom deisgned to suit special applications with low velocity requirements for efficient thermal comfort, generally used in stadiums, concert halls, airports etc. The Air Master displacement diffuser is designed to achieve thermal comfort, efficient ventilation and improve indoor air quality. The distribution unit can be constructed in cylindrical, semi-cylindrical, quarter cylindrical, trianglar, rectangular, square shapes. The air inlet connection can be circluar or rectangular and can be located either at the top or bottom of the diffuser. It can be mounted of floor, ceiling or wall. Displacement diffusers are custom designed and fabricated as per requirement. Accessories: mounting base/plate (if any). 36 degree air distribution pattern Low noise No visible joints Aesthetic appearance/architecturally appealing Shapes to suit interior design Circular air inlet for efficient air distribution Can add more if necessary

Extruded Aluminium Drum Louvers is adjustable both horizontally as well as vertically and suitable for high volume applications. It is fixed with opposed blade collar damper for excellent flow control. Aerofoil blades are fixed inside the drum body made of specially shaped profiles and the opposed blade damper is attached to the drum body. The whole assembly is rigidly fixed to the frame by mechanical fasteners so as to enable rotation in the vertical direction. The opposed blade damper in supply diffuser can be easily adjusted through the face of the unit by means of screw driver. The louver is suitable for both long and short throw patterns with trajectory control. The drum can be adjusted in the vertical direction 0 to 30 degrees up or down to direct the air throw in the desired direction. Foam gasket is sealed around the back of the frame to avoid air leakage as option. Flange width is 30mm as standard.

Extruded Aluminium Fresh Air (or Exhaust Air) Louver with 45 degree blades to prevent rain water penetration. Typically used for fresh air intake and exhaust air applications. Collar dampers and filters are provided as accessories for supply air. Composed of frame and horizontal blade assembly made of high quality extruded aluminium profile with the advantages of durability and corrosion resistance. Designed to have sturdy construction. Louver blades are fixed to the main frame using screws and riveted to the mullions on rear side in bigger sizes for additional strength and rigidity. Weather resistant structure with blades inclined at an angle of 45 degree to protect against rain water penetration. Assembly provides around 45% effective pressure area. Multiple sections will be assembled as per request. Fine filter and metal mesh filter can be provided as option for fresh air intake applications. Collar damper available as accessory for supply air.

Extruded Aluminium Heavy Duty Louver with 45 degree blades to prevent storm water. Typically used for fresh air intake and exhaust air applications with weather proof capability. Collar dampers and filters are provided as accessories for supply air. Constructed of heavy duty frame and horizontal heavy duty blade assembly made of high quality extruded aluminium profile with the advantages of durability and corrosion resistance. Designed to provide more than 65% effective pressure area thereby having lesser pressure drop. Used in heavy duty applications that require extremely sturdy construction to withstand heavy storms. Louver blades are fixed to the main frame using screws and riveted to the mullions for bigger sizes to have better rigidity. Louver blades are specially designed with two stage baffles for excellent rain water penetration. Weather resistant structure with blades inclined at an angle of 45 degree to protect against rain water penetration. Multiple sections will be assembled as per request.

Acoustic Louvers with steel or aluminium construction are filled with high quality organic acoustic media of 48 Kg/m3 density rockwool 50 mm thick as standard. Air Master high performance absorptive type Acoustic Louvers attenuate undesirable noise from being transferred into the environment with minimal air-flow restriction. Designed to be architecturally appealing in addition to having sturdy construction with maximum acoustic performance and minimal pressure drop. Frame is inverted U shaped having 25mm flanges with a flat blade design as standard. Available in both single and double banks. Louver depth above 300mm will have double bank construction with chevron blade design. Available in both single and double banks. Louver depth above 300mm will have double bank construction with chevron blade design. Insulation is lined to prevent the ingress of media into the air stream. Modular design of Air Master Acoustic Louvers allows easy site assembly of multiple section. For areas that require accessibility, options such as custom made doors with hinged acoustic louvers or sliding doors with removable/fixed acoustic louvers are available. Tested and certified by Intertek Laboratory USA (NVLAP) in accordance with ASTM standard E477-2013 entitled Standard Method of Testing Duct Liner Materials and Prefabricated Silencers or Acoustical and Airflow Performance. Minimum Single Section Size (WxH): 300450 mm Maximum Single Section Size (WxH): 1800x2400mm Applications include generator room, pump room, compressor room and car park ventilation. Generally used for fresh air intake and exhaust applications.

Specification: Extruded Aluminium Sand Trap Louver with opposite mounted U channel blades to prevent sand penetration. Typically used for fresh air intake and exhaust air applications. Collar dampers and filters are provided as accessories for supply air. The frame and blades are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Composed two sets of inverted U-channels mounted vertically on two opposite rows. Drain holes of diameter 20 mm are provided in two rows at the bottom of the louver for emptying filtered sand and dust. Can be manufactured from G.I or SS as option. Designed to separate sand and dust from the air stream. Generally used for ventilation applications and at inlet

Extruded Aluminium Opposed Blade Collar Damper with Nylon gears and lever on face side for smooth operation. Typically used in duct collars to control supply air. Frame and blades are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Operation is opposed blade for uniform air flow. This ensures positive control over the air stream. Damper blades can be lever operated from the face opening. Listed height in mm 75, 100, 150, 200, 250, 300 mm. Non standard sizes available as option.

Extruded Aluminium Low Leakage Volume Control Damper with aero-foil opposed blades and nylon gears system outside air stream, with optional motorized actuator. Frame and blades are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Double skinned aerofoil blades are standard. Blades are coupled by toothed nylon gears which provides opposed blade operation. Gear operation system is located outside of air stream. Hand locking quadrant is provided with clear open/ close indication and three intermediate open positions (1/4 1/2 3/4). Optional: can be provided with a motorised actuator of any make. Gasket can be fixed in between blades for low leakage applications. Surface finish is natural mill finish as standard. Powder coating or anodizing can be done as per requirement. Frame size: 125mm depth and standard flange height of 40mm. Drive shaft: Electro-plated square rod of size 12mm x 12mm. Bushings: Self-lubricating nylon bushings.

Volume Control Damper with Aluminium Aerofoil opposed blades and 1.2 mm thick Galvanized Frame as standard fixed with nylon bushes and gear outside air stream, with optional motorized actuator. Designed for use in heating, ventilating and air conditioning systems. Joints are welded and protected by aluminium spray coating to prevent rusting. Blades are coupled by toothed nylon gears which provides opposed blade operation. Hand locking quadrant is provided with clear open/ close indication and three intermediate open positions (1/4 1/2 3/4). Optional gasket is sealed across the blade edges to minimize air leakage between the blades. Flanged corners are supplied with pre-drilled holes as standard for fixing to the duct. Dampers without flanges available as option for duct insertion purpose. Double skinned aerofoil blades are standard Frame size: 150mm depth and standard flange height of 32mm. Drive shaft: Electro-plated square rod of size 12mm x 12mm. Bushings: Self-lubricating nylon bushings.

Volume Control Damper with high quality Galvanized Frame and Blade fixed with nylon bushes opposed blade operation linkage system outside air stream, with optional motorized actuator. Designed for use in heating, ventilating and air conditioning systems. Joints are welded and protected by aluminium spray coating to prevent rusting. Blades are coupled by toothed nylon gears which provides opposed blade operation. Hand locking quadrant is provided with clear open/ close indication and three intermediate open positions (1/4 1/2 3/4). Optional Foam gasket is sealed across the blade edges to minimize air leakage between the blades. Flanged corners are supplied with pre-drilled holes as standard for fixing to the duct. Dampers without flanges available as option for duct insertion purpose. Single skinned 3V groove blades are standard Frame size: 150mm depth and standard flange height of 32mm. Drive shaft: Electro-plated square rod of size 12mm x 12mm. Bushings: Self-lubricating nylon bushings, with option for brass bushes.

Circular Volume Control Damper is made with high quality Galvanized Frame and Single Flap Blade fixed with nylon bushes, with hand locking quadrant or optional motorized actuator. Designed for use in heating, ventilating and air conditioning systems. Joints are welded and protected by aluminium spray coating to prevent rusting. GI blades are made of circular single flap welded to the axle for strength. Hand locking quadrant is provided with clear open/ close indication and three intermediate open positions (1/4 1/2 3/4). Optional Foam gasket is sealed across the edges to minimize air leakage around the blade. Flange width 25mm as standard. Dampers without flanges available as option for duct insertion purpose. Bushings: Self-lubricating nylon bushings Motorised damper or required make can be provided as option.

Extruded Aluminium Light Duty Non Return Damper for One Way Restricted Air Flow with Rigid Aluminium Blades and gasket. Linkage can be provided to connect all blades as option for simultaneous and rattle free operation. Frame and blade are made of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Air operated damper blades are fixed to the frame by self-lubricating nylon bushes. Blade edges are sealed with gasket to avoid rattling noise and to minimise air leakage. Blades open fully or at any angle depending on the air velocity and pressure. Blades stay in position of opening without fluctuating when there is constant air flow. Blades close quietly when the air flow stops. Designed to maintain constant pressure level inside pressurized rooms by relieving excess air when it exceeds the desired limit. Generally installed on diesel generator, plant rooms ventilation system and exhaust ducting. Available in square and rectangular sizes. Frame is made of L shapes profile for wall mounting with 20 mm flange.

Specification: Pressure relief dampers are made of heavy duty galvanised sheets and are designed and tested to maintain constant pressure inside the room or duct. Frame and blades are made of high quality galvanized sheets. Air operated damper blades are fixed to the frame by self-lubricating metal bushes. Blade edges are sealed with foam gasket for air tight operation. Blades open fully or at any angle depending on the air velocity and pressure. Blades close quietly when the air flow stops. Designed to maintain constant pressure level inside pressurized rooms by relieving excess air when it exceeds

Specification: Pressure relief dampers are made of heavy duty galvanised sheets and are designed and tested to maintain constant pressure inside the room or duct. Frame and blades are made of high quality galvanized sheets. Air operated damper blades are fixed to the frame by galvanized metal bushes. Blades open fully or at any angle depending on the air velocity and pressure. Blades close quietly when the air flow stops. Designed to maintain constant pressure level inside pressurized rooms by relieving excess air when it exceeds the desired limit. Available in square and rectangular sizes.

Extruded Aluminium Access Doors with Rigid Heavy Duty Frame and hinges for 90 degree opening provided with spring loaded latch. Thermal and acoustic insulation can be provided as option. Typically used in gypsum and wooden false ceilings for access to ducts, AHU, FCU, damper controls etc. Frame is high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity. Door consists of additional frame to provide rigidity. Door panel is made of 1 mm thick Aluminium Sheet. Frame is provided with 2 mm thick neoprene gasket all around to avoid leakage and reduce noise penetration. Door panel can be optionally insulated with 25mm thick, 24 or 48 Kg/m3 density open cell for acoustic and thermal insulation. Structure is designed to withstand high pressure differences. Sizes are available from 300300 mm to 1000 x 1000 mm in single pane. Custom sizes can be made in double pane on request. Access doors offer quick and easy installation where duct access required.

Plenum Boxes for HVAC Systems made of high quality galvanized sheet of required gauge and 50mm spigot as standard. Insulation of required thickness and density as well as butterfly damper are available as options. Fabricated from 24, 22 or 20 gauge high quality glavanised steel sheet. Circular spigots of required diameter and standard length of 50mm as standard can be fixed to the plenum box. Square, rectangle and oval shape spigots are available on request. Plenum boxes with side inlet are standard. Other positions are available as per the site conditions to suit client specifications. Plenum Boxes for HVAC Systems of length upto two meters can be manufactured with single spigot. For more than 2 meters plenum boxes will be arranged with multiple spigots. Volume control butterfly dampers can be fixed to the spigots on request. Fixing brackets are provided at all four corners on the top side by default for hanging the plenum from ceiling. Large size plenums can be specially manufactured on request.

Rectangular Sound Attenuators made of high quality 1 mm thick Galvanized Sheet with 100 to 200 mm thick baffles consisting of 48 Kg/m3 density rockwool lined with RP tissue and perforated sheets and 150 to 200 mm air way gap as standard with V shaped entry and exit. Different specifications can be made to customer requirements based of sound attenuation requirements. Aerodynamically designed to ensure maximum insertion loss and minimal pressure drop. Air gap and length of silencer are selected to meet the required NC level. Sturdy construction and high noise absorbing capacity to obtain required insertion loss without compromising performance. Manufactured to ensure long and maintenance free service. Splitters are made of V shaped entry-exit to minimize self-generated noise and pressure loss and avoid turbulance. Full width splitters in the middle and half width side splitters. Casing construction with lock formed seams meet SMACNA standards thus proving excellent strength and rigidity. Thoroughly sealed to prevent air leakage. Duct mate flange connection (standard) on both ends in compliance with DW144 standards. Acoustic infill media is of superior quality non combustible & have fungi resistant characteristics meeting the requirements of EN ISO 1182 and ASTM C665 respectively. It has excellent noise reduction coefficient characteristics with an additional qualification of being biologically inert. Single faced liner with perforated metal is provided to prevent media entering into the air stream. Standard available air gaps are 50, 75, 100, 125, 150, 175, 200 and 250 mm. Fibre glass insulation available as option. Tested and certified by Intertek USA (NVLAP accredited laboratories) in accordance with ASTM standard E477-06a, entitled standard method of testing duct line material and prefabricated silencers for acoustical and airflow performance.

Circular Sound Attenuators made of high quality 1 mm thick Galvanized Sheet with baffles consisting of 48 Kg/m3 density rockwool. Different specifications can be made to customer requirements based of sound attenuation requirements. Circular silencer construction provides maximum acoustical performance, while minimizing system pressure drop even at high velocities. Desired aerodynamic performance is achieved by avoiding the need for square to round reducers that will increase the pressure drop. Sturdy construction and high noise absorbing capacity to obtain required insertion loss without compromising performance. Manufactured to ensure long and maintenance free service. Centre splitter (Pod) are radiused at both ends to minimize self generated noise and pressure loss. Full width splitter in the middle and half width side splitters at the circumference. Casing construction with lock formed seams meet SMACNA standards thus providing excellent strength and rigidity. Thoroughly sealed to prevent air leakage. Slip connection on both ends in compliance with DW144 standards. Acoustic infill media is of superior quality non combustible & have fungi resistant characteristics meeting the requirements of EN ISO 1182 and ASTM C665 respectively. It has excellent noise reduction coefficient characteristics with an additional qualification of being biologically inert.

Rectangular Cross Talk Sound Attenuators made of high quality 0.8 mm thick Galvanized Sheet with 100mm thick baffles consisting of 48 Kg/m3 density rockwool. Different specifications can be made to customer requirements based of sound attenuation requirements. Designed in U shape as standard and can be made in Z shape as option.

UL 555 Motorised Fire Damper 90 minutes rated with 16 Gauge Frame and 3V groove blades and 18 Gauge sleeve as standard. Factory fitted and tested with Belimo UL TRD and 9 Nm Honeywell UL spring return actuator All corners of the frame are fully welded (and painted to prevent rust) to ensure sturdy construction for a rattle free operation. Designed for parallel blade operation. Blades are linked together externally (out of airstream). AMFD model fire dampers are UL 555 classified & manufactured under Air Masters strict quality control procedures. All actuators are externally mounted with 230VAC as standard and are supplied with inbuilt auxiliary switch. Actuator position will be based on Clockwise (CW) closure direction as standard. TRDs have an inbuilt RESET switch to reopen the damper after closure. All AMFD models are factory fitted with 400mm wide & 1.2mm thick GI sleeve as standard and the entire assembly can comfortably seat through 8 thick wall. All dampers and TRDs are factory tested before dispatch to ensure smooth operation in the field. Can be used in Masonry and Gypsum walls/partitions of less than 3 hours fire resistance rating as per NFPA 90-A in accordance with ANSI/UL555 standards. Maximum Approved Size: o Multiple section: 70 x 70 (vertical installation / static application only) o Single section: 35 x 35 (vertical installation / static & dynamic application).

UL 555 and UL555S Motorised Fire and Smoke (Combination) Damper 90 minutes rated, Class II Leakage at 250oF with 16 Gauge Frame and 3V groove blades and 18 Gauge sleeve as standard, fixed with UL Blade seals and Fire Stop Sealant. Factory fitted and tested with Belimo UL TRD and 9 Nm Honeywell UL spring return actuator. All corners of the frame are fully welded (and painted to prevent rust) to ensure sturdy construction for a rattle free operation. Designed for parallel blade operation. Blades are linked together externally (out of airstream). AMFD model fire dampers are UL 555 classified & manufactured under Air Masters strict quality control procedures. All actuators are externally mounted with 230VAC as standard and are supplied with inbuilt auxiliary switch. Actuator position will be based on Clockwise (CW) closure direction as standard. TRDs have an inbuilt RESET switch to reopen the damper after closure. All AMFD models are factory fitted with 400mm wide & 1.2mm thick GI sleeve as standard and the entire assembly can comfortably seat through 8 thick wall. Blades and fixed with UL listed blade to prevent smoke leakage (Class II 250oF) Fire stop sealant is applied to the entire damper to seal all minute gaps. All dampers and TRDs are factory tested before dispatch to ensure smooth operation in the field. Can be used in Masonry and Gypsum walls/partitions of less than 3 hours fire resistance rating as per NFPA 90-A in accordance with ANSI/UL555 standards. Maximum Approved Size: o Multiple section: 70 x 70 (vertical installation / static application only) o Single section: 35 x 35 (vertical installation / static & dynamic application).

UL555S Motorised Smoke Damper 90 minutes rated, Class II Leakage at 250oF with 16 Gauge Frame and 3V groove blades and 18 Gauge sleeve as standard, fixed with UL Blade seals and Fire Stop Sealant. Factory fitted and tested with Belimo UL TRD and 9 Nm Honeywell UL spring return actuator. All corners of the frame are fully welded (and painted to prevent rust) to ensure sturdy construction for a rattle free operation. Designed for parallel blade operation. Blades are linked together externally (out of airstream). AMFD model fire dampers are UL 555 classified & manufactured under Air Masters strict quality control procedures. All actuators are externally mounted with 230VAC as standard and are supplied with inbuilt auxiliary switch. Actuator position will be based on Clockwise (CW) closure direction as standard. TRDs have an inbuilt RESET switch to reopen the damper after closure. All AMFD models are factory fitted with 400mm wide & 1.2mm thick GI sleeve as standard and the entire assembly can comfortably seat through 8 thick wall. Blades and fixed with UL listed blade to prevent smoke leakage (Class II 250oF) Fire stop sealant is applied to the entire damper to seal all minute gaps. All dampers and TRDs are factory tested before dispatch to ensure smooth operation in the field. Can be used in Masonry and Gypsum walls/partitions of less than 3 hours fire resistance rating as per NFPA 90-A in accordance with ANSI/UL555 standards. Maximum Approved Size: o Multiple section: 280 x 35 (vertical installation / static application only) o Multiple section: 140 x 70 (vertical installation / static application only) o Single section: 35 x 35 (vertical installation / static & dynamic application).

UL 555 Classified Curtain Fire Damper with 3 hours Fire Rating made of 16 Gauge Frame and 20 Gauge interlocking blades secured with SS Springs. Blades outside airstream clamped with UL Listed 165/212 F Fusible link. 16 Gauge sleeve optional. The interlocking type roll formed blades are designed with hat shaped reinforcement ridges ensuring strength and stability. The ramp is firmly secured to the frame by SS rivets. The frame is designed to keep blades out of airstream to prevent rust and contamination. All corners of the frame are fully welded (and painted to prevent rust) to ensure sturdy construction. AFD-3 model fire dampers are UL 555 classified and manufactured under Air Masters strict quality control procedures. AFD-3 series fire dampers are UL555 classified for 3 hours static application only. Fusible Link 165 oF as standard. Option of 212oF up to 27 x 41 for vertical installation only) Micro switch can be provided to know the status of dampers blade open/close position. Maximum Approved Size: o Single section: 42 x 42 3.0 Hours (vertical installation) o Single section: 36 x 36 1.5 Hours (horizontal installation) o Multiple section: 84 x 84 3.0 Hours (vertical installation) o Multiple section: 94 x 94 1.5 Hours (vertical installation).

Pressure Independent Variable Air Volume Damper with Differential Pressure Flow Grid Sensor having circular inlet and rectangular outlet. Acoustic and thermal lining fixed with modulating actuator provided with thermostat. Unit has one primary circular air inlet, one rectangular discharge outlet to the room. Capacities range from 40-4000 CFM in 7 sizes. Units are tested by ETL Intertek in accordance with AHRI Stadards 880-2011, Performance Rating of Air Terminals and ASHRAE 130-2008, Methods of Testing Air Terminal Units. Factory calibrated to job requirements. Equipped with high quality multi-point differential pressure flow grid for accurate airflow measurement. NEMA1 enclosure control box for control mounting. Damper edge is sealed with foam gasket to prevent air leakage. The damper shaft is made of solid G.I. rotating in low friction, self lubricating permanently impregnated brass bearings.

Bypass Variable Air Volume Damper with Circular Inlet and Rectangular Outlet provided with a rectangular Bypass outlet. Acoustic and thermal lining is fixed inside with modulating actuator provided with a thermostat. Unit has one primary air inlet, one rectangular discharge outlet to the room, and one rectangular bypass discharge outlet. Units are tested by ETL Intertek in accordance with AHRI Stadards 880-2011, Performance Rating of Air Terminals and ASHRAE 130-2008, Methods of Testing Air Terminal Units. Capacities range from 50-3200 CFM in 8 sizes. Integral sound attenuator provides excellent noise control, additional sound attenuator can be provided. Conveniently accessible externally mounted controls. Inlet connection bead offers a means for secure flex duct connections. Enclosure for control box mounting

Pressure Independent Variable Air Volume Damper with Square Inlet and Square Outlet and built in circular transition suitable to fixe directly in square ductwork. Differential Pressure Flow Grid Sensor and modulating actuator provided with thermostat. Acoustic lining can be provided as an extension optionally. Unit has square air inlet, and square discharge outlet to the room. Acircular transition piece is built-in to the frame Factory calibrated to job requirements. Equipped with high quality multi-point differential pressure flow grid for accurate airflow measurement. Enclosure provided for control box mounting. Damper edge is sealed with foam gasket to prevent air leakage. The damper shaft is made of solid G.I. rotating in low friction, self lubricating permanently impregnated brass bearings. Sturdy construction and low noise generating capacity to obtain required NC without compromising performance. Manufactured to ensure long and maintenance free service. On/off, modulating DC controls 0 to 10V. Belimo/KMC control/Neptronic controls or any controllers and thermostats of customer choice available. BMS compatible actuators can be provided on request. Casing construction meets SMACNA standards and provides excellent strength and rigidity. Thoroughly sealed to prevent air leakage. Acoustically and thermally lining of 15mm Nitrile Rubber can be optionally provided as an extension to the VAV.

Pressure Independent Variable Air Volume Damper with Circular Inlet and Cirular Outlet suitable to fixe directly in Circular Ductwork. Differential Pressure Flow Grid Sensor and modulating actuator provided with thermostat. Unit has circular air inlet, circular discharge outlet to the room. Suitable to fixe directly in circular ductwork. Capacities range from _____ CFM in ___ sizes. Factory calibrated to job requirements. Equipped with high quality multi-point differential pressure flow grid for accurate airflow measurement. Enclosure control box for control mounting. Damper edge is sealed with foam gasket to prevent air leakage. The damper shaft is made of solid G.I. rotating in low friction, self lubricating permanently impregnated brass bearings. Sturdy construction and low noise generating capacity to obtain required NC without compromising performance. Manufactured to ensure long and maintenance free service. On/off, modulating DC controls 0 to 10V. Belimo/KMC control/Neptronic controls or any controllers and thermostats of customer choice available. BMS compatible actuators can be provided on request. Casing construction meets SMACNA standards and provides excellent strength and rigidity. Thoroughly sealed to prevent air leakag

Pressure Independent Variable Air Volume Damper in Elliptical Duct with concealed control box. Differential Pressure Flow Grid Sensor and acoustic and thermal lining fixed with modulating actuator provided with thermostat.

Insulated & Uninsulated Flexible Duct is available with Metalized jacket to provide ultimate strength and protection. Metalized polyester vapour barriers are reinforced with Fiberglass scrim for high durability, tear resistance and outstanding thermal insulation protection. Flexible duct is used for thermal insulation, heating, ventilating and air conditioning systems for residential and commercial applications. They are most commonly used to connect the Main duct to the plenums. In addition to this, flexible ducts are used in areas where manoeuvring of steel ducts are a challenge due to other services for shorter length.

Flexible Duct Connectors are used to eliminate duct system noises and vibrations for industrial and commercial applications. The Basic use is to isolate the vibration and noises to the source with an air tight flexible joint consisting of a fabric fastened to steel metal on both sides. The flexible connector is fixed between the A/C equipment or fan and the ductwork. Various cloth types, cloth widths and steel widths are available in order to meet most of the installation requirements at job sites

Dead soft malleable aluminum foil coated with an aggressive high-temperature acrylic/rubber adhesive system, providing an excellent vapor seal and conforming well to irregular surfaces of both fibrous and sheet metal ducts. High-Quality Tapes for HVAC Systems, like aluminum foil tapes, are coated with a special cold-weather acrylic/rubber sensitive adhesive system that combines superior quick stick at normal temperatures with exceptional low-temperature performance at freezing. These tapes are recommended for use at normal and elevated temperatures.

Three directionally and Two directionally reinforced fiberglass scrim laminated with foil & kraft. This tape conforms well to both fibrous duct board and blankets. Coated with a special cold weather Acrylic/Rubber, pressure sensitive adhesive system that combines superior quick stick at normal temperatures with superior low temperatures performance below freezing. Recommended for use at normal and elevated temperature.

Thermal insulation tape is composed of Aluminium glass cloth bonding high performance flame retardant adhesive with easy release silicon paper. Aluminium glass cloth backing enable thermal insulation tape have good heat and light reflective performance. A goodvapor barrier tape for it low moisture vapor transmission rate. Wide range of temperature ( -20 C to 120 C ) offer wide range application Used in HVACR industry to joint & seams of between Fibre glass, blanket, Fibre glass duct board & ventilation Ducts

Polyethylene-coated cloth tapes are durable, conformable tapes that can be used for a very wide range of applications. Noted for their water, chemical and abrasion resistance and overall product strength properties, polyethylene-coated cloth tapes can be used for masking, sealing, packaging, building and other general purpose applications. This tapes adhesive properties make these products the perfect choice for many different substrates. Duct tape is the industry choice for most new, maintenance and repair HVAC applications.

Offers good mechanical properties, good thermal insulation, excellent chemical resistance, and low water absorption. It holds sound peel-off resistant strength, fine shock relaxation capability. It is widely used in HVAC and Construction industry, Mechanical industry, Trade, Automobile industry. Useful as protection sheet to all kinds general applications, Electronics industry, Household etc

PVC pipe wrapping tape composed of soft film with rubber based PSA it is characterised by excellent insulation, good flame retardant properties and excellent resistant to low temperature. This is used a lot by the underground pipe contractor to protect Iron & Steel pipe from corrosion, also used to protect PVC pipe from corrosion due to ultraviolet rays in above the ground installation. This tape is also used in oil field industry to wrap above and underground pipes prevent corrosion due to high methane levels in the soil around oil field.

These tapes are widely used for the temporary protection of any kind of metal surface during metal processing, assembling, storage or transport. They exhibits a good balance between a perfect adhesion during the application and an easy peel off without residue on the applied surface. The product is useful for temporary protection on surface like coated metal, Glossy finish, Stainless Steel, Aluminium, Anodized Aluminium, Composite Panels, Kynar/Powder coated/Painted surfaces & Acrylic, Poly Carbonate Sheets.

Carry handle tapes that guarantee carrying comfort for multipacks of mineral water, soft drinks fruit juices, dairy products and tissue boxes. This Tape has able to take up a leading position on the Middle East market by combining comfort and efficiency in carry handle tapes.

A superior quality Carton Sealing Tape, with specially developed self adhesive coating, available with Plain, Coloured and Printed. The tape exhibits maximum peel strength on the applied surfaces and can hold heavy cartons. The product is useful for custom made Carton Sealing, Packing, Labeling, and bundling the product. Suitable to use with automatic packing machines and manual dispensers.

Masking Tapes are ideal for masking off areas which are not to be painted. The main benefit of utilizing the tape is its weak adhesive that allows easy removal without leaving behind any sticky residue. Our tapes come with different available adhesive strengths. Economical masking tape offering both economy and versatility for a variety of applications. Use for general purpose packaging, building, holding, splicing, masking and labelling.

Barricade tape is brightly coloured tape (often incorporating a two-tone pattern of alternating yellow-black or red-white stripes or the words Caution or Danger in prominent lettering) that is used to warn or catch the attention of passers by of an area or situation containing a possible hazard. It acts as a minor impediment to prevent accidental entrance to that area or situation and as a result enhances general safety. Barricade tape is also known as construction tape or barrier tape or in reference to the safety hazard involved as caution tape, warning tape, danger tape or hazard tape. Barricade tape is made with durable, resilient, tear-proof plastic materials such as

Adhering nameplates and signage, Paper spiking during manufacturing processes Laminating to loam rubber for gasket production.

For mounting posters, number plates, wardrobe mirror fixing & holding plastic mounting, sign plates, electrical parts, plastic hooks and also used in automobile industry.

A vapor barrier (or vapour barrier) is any material used for damp proofing, typically a plastic or foil sheet, that resists diffusion of moisture through wall, ceiling and floor assemblies of buildings to prevent interstitial condensation and of packaging. Technically, many of these materials are only vapor retarders as they have varying degrees of permeability.