Ambala, Haryana, India
Verified
Add Review
Our Product / Services
| ||||
Flow Table: The instrument is recommended for concrete where nominal size of coarse aggregates does not exceed 38mm. It comprises of table top of 762 mm dia, fitted on a heavy duty Cast Iron frame. A cam action provides a free fall of 12.5 mm to the table. A conical mould of 120 mm height with base dia. of 250 mm and top dia. of 170 mm is also provided along with tamping rod 16 mm dia. x 600 mm long.
Available in models :
Hand operated with M.S. table topMotorised with M.S. table topHand operated with Gun Metal table topMotorised with Gun Metal table top
Vibrating Table : It is designed to carry a load of 140kg. The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrator clamped to imparted by means of off-balance masses rotating on a shalf of a vibrator clamped to the underside of the table top. The table top is 50cm x 50cm. and has stops along its edges to prevent moulds from walking of the table during vibration. A cross arm adjustable on a vertical rod at the center of the table is provided to hold the moulds while operating the table. The variable pitch pulley arrangement permits the frequency to be varied steplessly between a maximum of 3600 vibrations down to 2600 vibration per minute. A speed regulation handle is provided for increasing or decreasing the frequency. A switch is provided for starting the motor. suitable for operation on 440 volts, 3 phase, 50 cycles, A.C.Supply. Note: Vibrating Tables of table top size 75cm x 75cm as well as 100cm x 100cm are also available.
| ||||
Flow Table Motorized :
Alpha Chem is manufactures, exporter & suppliersFlow Table Motorized.
Flow Table Motorized : The Flow Table consists of a brass table top 250 2.5 mm dia, mounted on a rigid stand. The table top is reinforced with equally spaced ribs and allowed to drop through 12mm by a ground and hardened cam. The Motor Drive assembly using the geared motor box is designed to rotate the cam through the shaft at 120 rpm.Complete with Flow mould 100mm base dia, 70mm top dia and 50mm high. The new design has better aesthetics and compact look.Suitable for operation on 220V, 50Hz, single phase, AC supply.
