Write a Review
Our Product / Services
We are leaders in the market for providing best range of Point Load Index Tester, Tensile Strength Tester (Manual), Aggregate Impact Tester with Blow Counter, Aggregate Impact Tester and Tensile Strength Tester
Point Load Index Tester : Very useful for rock classification. This is a portable instrument and is useful in the field also. Uniaxial compressive strength for rock specimen can also be predicted approximately. The instrument comprises of :- A three pillar type load frame on the base of which at the centre is fixed a 10 Tonne capacity hydraulic jack with a conical platen at the top of jack. The other conical platen is fixed to the top plate of the frame at its centre. A distance between two conical platen is fixed to the top plate of the frame at its centre. The distance between two conical platens is adjustable by vertical movement of the upper plate of the load frame. Loading jack wih integral hand operated pump and a pressure gauge 0-2500 kg x 25 kg.
Alpha Chem is manufactures, exporter & suppliersTensile Strength Tester (Manual).
Tensile Strength Tester (Manual) : A loading Machine, double lever type, with steel scale marked from 0-500 Newtons in 10 Newton division. Maximum loading capacity 5 kN. Automatic Loading system using Lead Shot. Lead shot 15 kg supplied with the machine. Set of weights for weighing lead shot comprising one each for weighing upto 0.5 kN, 1 kN, 1.5 kN & 2.0 kN. One standard Briquette Mould with Base Plate also Supplied.
Alpha Chem is manufactures, exporter & suppliersAggregate Impact Tester with Blow Counter.
Aggregate Impact Tester with Blow Counter : This is used to determine the aggregate impact value and has been designed in accordance with ASTM and BS Standards. The sturdy construction consists of a base and support columns.These form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 + 5 mm. The hammer is provided with a locking arrangement.Applicable StandardsBS 812-112Ordering InformationAggregate Impact Tester with Blow Counter
AccessoriesCylindrical CupMetal Measure 75 mm ID x 50 mm deepTamping RodAutomatic Blow Counter
Alpha Chem is manufactures, exporter & suppliersAggregate Impact Tester.
Aggregate Impact Tester : The Aggregate Impact Tester is equipped with a circular base with two vertical guides. Aggregate Impact Tester machine which is available with us is fabricated using high grade raw material and advance technology.
Features
Hammer with a locking arrangement Hammer is removable for emptying as it falls freely to the baseFalling height of hammer is adjusted through 380 5mmSupplied complete with metal measures 75mm dia x 50mm high (for specimen preparation) and tamping rod 230mm long x 10mm dia High performance Weight of hammer : 13.75 0.25 kg.
Tensile Strength Tester : Capacity of Tester with accuracy of 100g : 250 Kgf. and 500 Kgf.
Capacity of Tester with accuracy of 10g : 20 Kgf, 50 Kgf and 100 KgfS Type Load Cell fixed with Top GripTraverse Speed: 300 & 100mm /min.Max. Grip Separation: 1000 mmMin. Grip Separation: 25 mmTop Grip is fixed and Bottom Grip is Movable Type.Elongation measurement by Steel Scale and Digital Counter Meter Both.Digital Display of Load and Elongation.Peak value of last test can be read.User friendly key panel with switch of zero setting and peak value of last testMotor: 1/2 HP single phase 220V 50 Hz. ( for Capacity up to 100 Kgf )Motor: 1 HP single phase 220 V 50 Hz ( for Capacity up to 500 Kgf)Power: 220 V AC 50 Hz.Safety device by limit switch to protect from over traverse.
Related Standards
ASTM D 434, ASTM D 1578, ASTM D 5034, ASTM D 5035, BS 1610BSEN 1002 3DIN 51221
Alpha Chem is manufactures, exporter & suppliersElectronic Unconfined Compression Tester.
Electronic Unconfined Compression Tester : This is similar to ALPHA CHEM-1400 with the added advantage of a motorised drive permitting a choice of three constant rates of stain.
SPECIFICATION :
Comprises a screw operated load frame, cap.5000kg with a gear box and motor drive giving 1.25, 1.5, 2.5mm/min. Rates of strain, a pair of cone seating, adaptor for proving ring, and stain dial gauge bracket. Supplied with one pair of male/female coning tools for 38mm dia samples but without ring and dial gauge. Suitable for operation on 230 V, Single Phase A.C. Supply.
ACCESSORIES :
Coning tools in pairs (Male & Female) for samples having diameter 38mm, 50mm, 75mm & 100mm
Dhruv (Alpha Chem)
341, Industrial Estate
Saha, Distt : Ambala.
Haryana. India.
Share us via
