Amalgam Engineering

Baner, Pune, Maharashtra

NutriServe N&P Enhancer ensures the ideal equilibrium of nitrogen and phosphorus in wastewater, fostering an environment where microorganisms thrive and pollutant removal is maximized. Acting as a catalyst for microbial activity, this solution empowers beneficial microorganisms to operate at their peak, enhancing organic matter decomposition and pollutant removal efficiency.

Category: Nitrogen & Phosphorus enhancer, N&P Enhancer

Description

Urea & DAP is added in waste waters to supplement the need of Nitrogen & Phosphates, which are essential macro nutrients required for healthy grow of MLSS. Commercially Urea has always been the source of Nitrogen & DAP provides for Nitrogen & Phosphates both. UD-Alternate is not a 100% replacement for Urea & DAP, but it can surely reduce the quantity required by 50 – 75%. Chemically or stoichiometrically, UD-Alternate cannot be compared with urea & DAP in terms of equal replacement of NH3-N or PO4. However UD-Alternate justifies it’s addition by providing the same technicalities which is provided by Urea & DAP. This is technically possible by providing an alternative source of Ammoniacal Nitrogen & Phosphates. Chemically speaking Urea is the richest & highest source of NH3-N, While DAP is the richest source of PO4, however mixed culture microbes (MLSS) behave differently in a working plant. N2 fixation, N2 assimilation & effective N2 utilization can be achieved even at lower concentrations of Urea & DAP provided the MLSS has particular strains which can achieve the correct degree of N2 & PO4 assimilation. UD-Alternate contains macro, micro and secondary nutrients, amino acids, vitamins, proteins, carbohydrates and minerals naturally present in marine extracts. This unique combination helps the microbes present inside the aeration tank perform better.

1. Powdered form, Easy to use and easy to store

2. BOD Enhancer supplements useful bacteria within the ETP/STP

3. Shock load stabilization

Dosage

1. Urea, DAP stoppage & starting of UD-Alternate has to be supplemented with BactaServe addition. Adding BactaServe ensures presence of strong bacterial strains which can degrade COD & BOD without the high demand for NH3-N & PO4, which is otherwise required in cases of strains propagated from cow-dung.

2. Always reduce the dosage of Urea DAP gradually. Any sudden changes in the system disturbs the overall Biomass health.

3. 1st Month – Reduce Urea & DAP quantity by 25% & start adding the recommended UD- Alternate dose.

4. 2nd Month – Reduce Urea & DAP quantity by 50% & start adding the recommended UD-Alternate dose.

5. 3rd Month – Reduce Urea & DAP quantity by 75% & start adding the recommended UD-Alternate dose.

6. 4th Month & onwards – Continue adding Urea & DAP upto 25% of the original dose & continue adding UD-Alternate as per dosage recommended

FAQ

What is the use of this product?

This product is alternative for urea and DAP used in wastewater treatment. N&P Enhancer reduces use of Urea and DAp by 75%

When to use N&P Enhancer?

N&P Enhancer is added in waste waters to supplement the need of Nitrogen & Phosphates, which helps to grow of MLSS.

How does it help in aeration tank?

N&P Enhancer contains macro, micro and secondary nutrients, amino acids, vitamins, proteins, carbo-hydrates and minerals naturally present in marine extracts. which helps microbes to performance better in aeration tank.

NutriServe BOD Enhancer artificially increases the inherent BOD load in wastewater, kickstarting the biological treatment process in a safe and controlled manner. Supercharging the metabolic activity of beneficial microorganisms in your wastewater treatment system. This results in faster organic matter breakdown and more efficient pollutant removal.

Category: BOD Enhancer, Increase BOD level

Description

NutriServe BOD Enhancer is a formulation for artificially increasing the inherent BOD load in an organically starved waste water stream. Microbes / Bacteria require a minimum BOD threshold for rapid multiplication & acclimatization during the commissioning of the wastewater treatment plant. Speed of plant commissioning is dependent upon how fast the existing baby microbes reach full grown stage in terms of age & acclimatization too. The multiplying microbes should reach full grown MLSS stage with a healthy MLSS to MLVSS ratio. When a particular wastewater (Sewage or effluent) is deficient in sufficient BOD load or experiencing low flowrates, at such times, sustaining the MLSS, multiplying them & commissioning a system becomes a challenge in itself.

Benefits of using BOD Enhancer

1. Reduction in commissioning time of ETP & STP

2. Ensures consistent unchanging supply of essential BOD required for generating & sustaining MLSS

3. Rapid growth of MLSS with high MLVSS Content

4. Powdered form, Easy to use and easy to store

5. BOD Enhancer supplements useful bacteria within the ETP/STP

6. Shock load stabilization

Area of application

Aerobic:

1. Aeration tanks

2. MBBR (Moving Bed Biofilm Reactor)

3. Sequencing Batch Reactor(SBR)

4. Membrane Bio Reactor(MBR)

5. Rotating Biological Contactors(RBC)

6. Trickling Filters

Anaerobic:

1. Anaerobic Filter (AF)

2. Upflow Anaerobic Sludge Blanket (UASB)

3. Continous Stirred Tank Reactor (CSTR)

FAQ

Under which conditions BOD enhancer be used?

When BOD/COD ratio is less than the ideal ratio of 1:2. If the BOD level is below 1, BOD enhancer should be added to enhance BOD. This will rapidly increase BOD/COD multiply microorganism population.

How much BOD does 1kg BOD enhancer increase?

1 kg BOD enhancer gives 1.6kg BOD.

Does BOD enhancer affect water parameters?

No. Actually, it will improve water quality.

Key Features

• Works effectively in oxygen rich treatment environments

• Rapid increase in MLSS with high MLVSS values

• Strong and consistent biodegradation of organic pollutants

• Helps maintain biological stability in changing wastewater conditions

• Supports nitrification and denitrification processes

• Suppresses pathogen growth and promotes healthy biomass

• Suitable for municipal and industrial wastewater applications

  Benefits of BactaServe Aerobic

• Faster commissioning of new or underperforming STP and ETP plants

• Higher BOD and COD removal efficiency

• Strong resistance to shock load and fluctuating influent

• Reduction in foul odour in aeration and secondary treatment areas

• Lower sludge volume due to improved biodegradation

• No downtime - Reduced operational cost 

• Improved treated water quality that meets compliance standards

Suitable Treatment Processes

BactaServe Aerobic is compatible with all major aerobic wastewater treatment systems including:

• Activated Sludge Process (ASP)

• Extended Aeration (E-ASP)

• Sequencing Batch Reactor (SBR)

• Moving Bed Biofilm Reactor (MBBR)

• Membrane Bio Reactor (MBR)

• Rotating Biological Contactor (RBC)

Applications of BactaServe Aerobic Bioculture

The product is suitable for a wide range of wastewater treatment environments such as domestic sewage treatment plants, industrial effluent treatment plants, dairy processing units, pharmaceutical units, textile dye houses, chemical industries, sugar mills, pulp and paper units and any facility that requires efficient aerobic biodegradation.

How BactaServe Aerobic Works

The microbial strains in this formulation release specific enzymes that target complex organic matter including fats, oils, proteins, starches and other biodegradable pollutants. The microbes help convert these compounds into simpler substances which lowers the overall organic load. The product increases MLVSS levels which improves the strength of the biomass and enhances settling in the secondary clarifier. This results in more stable aeration performance and improved treated water quality.

Dosage and Activation   Activation Method

Mix 1 kg BactaServe Aerobic in 20 litres of clean non chlorinated water. Stir well and allow the solution to activate fully before dosing into the aeration tank.

Dosage Guidelines

The daily dosage depends on wastewater flow rate, organic load and inlet BOD or COD. Contact us for custom dosing recommendations can be provided after evaluating plant conditions and performance requirements.

NutriServe Aerobic is like energy drink for the microbes. NutriServe Aerobic Micronutrients contains a precise combination of vital micronutrients, including Potassium, Magnesium, Manganese, Iron, Zinc, Molybdenum, Calcium, Cobalt, Copper and trace elements, carefully selected to support the metabolic activities of beneficial microorganisms in aerobic treatment systems.

Category: Aerobic micronutrients, micronutrients for aeration tank

Description

NutriServe Aerobic is a water soluble proprietary formulation containing mixture of different micronutrients containing the following:

1. Potassium

2. Magnesium

3. Manganese

4. Iron

5. Zinc

6. Molybdenum

7. Calcium

8. Cobalt

9. Copper etc.

NutriServe Aerobic is stable for minimum of 2 years when stored is cool & dry place.

Benefits

1. Improves MLSS Settling in the clarifier

2. Increased BOD degradation by higher metabolism

3. Increases capability for sustaining BOD shock loads

4. Increases capability for sustaining flow based shock loads

5. Increases break down of complex compounds into simpler forms

How to Use

1. Take 100-200 Liters of HDPE/FRP PP dosing tank.

2. Mix one day dose of NutriServe Aerobic with raw water and dose the solution by gravity/pumping, continuously spread over 24 hours/day.

3. Place the dosing tank at the Inlet end of biological tank. You can also dissolve NutriServe Aerobic In the storage tank prior to biological tank so that it mixes with raw effluent/partially treated effluent before It is fed to biological tank.

FAQ

How does using micro nutrient help us during wastewater?

In wastewater treatment, bacterua require a balance of nutrients such as carbon & Nitrogen and micronutrient to process water effectively.

What problem can be solved using micro nutrients?

The role of those micro nutrients is in assisting enzymes to function iron for example is important in the role of energy harvesting metabolism of most organisms. Adding micronutrient improves the bacteria functioning on a cellular level, thus improving plant efficiency.

What are the long term effects of micronutrient use on the performance and sustainability of wastewater treatment plants?

Bacterial population and enzyme secretion from bacteria are crucial for sustainable wastewater treatment. Addition of micronutrients with reduced maintenance cost of bacteria addition in wastewater treatment.

NutriServe Oxy Enhancer swiftly releases dissolved oxygen into wastewater, creating an oxygen-rich environment that fuels the metabolism of beneficial microorganisms responsible for organic matter degradation. Oxygen-rich conditions facilitate enhanced nutrient removal, ensuring compliance with regulatory standards and reducing nutrient discharge.

Category: Quick DO, Dissolved Oxygen

Description

Infuse your treatment process with the power of oxygen, optimize microbial activity, reduce treatment costs, and enhance operational excellence.

The oxygen release is calculated stoichiometrically & measured dose is added in Waste water, Effluents, aquaculture ponds & also in soil for releasing oxygen.

Tailored dosage of NutriServe Oxy Enhancer to meet the specific oxygen requirements of your wastewater treatment system for precise and efficient oxygen supplementation.

Application Areas

1. Aerobic Process of ETP/STP (AT, MBBR, SBR, MBR)

2. Equalization Tank of ETP/STP

3. Treated water tank – For mild turbidity removal

4. Lakes for reducing algal blooms

5. Lakes for removing foul odour

6. Drains & Nallahs for removing Odour because of H2S

7. Aquaculture – For NH3-N & N2 control

8. Agriculture – For O2 release on surface and in sub-soil

Dosage

1. Dissolve in 20 litres bucket & add – For ETP & STP

2. Direct powder addition - For Lakes & Nallahs

3. Dosages may altered as per the wastewater volume

FAQ

What is the use of this product?

This product will release active oxygen at controlled rate. Whenever there in low DO, this product can be very helpful in increasing Do.

What happens when DO is low?

Low DO in aeration tank is detrimental to the microorganisms.

What is correct DO level to be maintains?

DO in aerobic wastewater treatment is residual dissolved oxygen. There should be minimun 2.0 ppm residual DO in aeration tank

Rapid Oxidizer ETP is Engineered to combat malodorous compounds, this formulation stands at the forefront of wastewater odour control, ensuring a fresher and more welcoming environment around Effluent Treatment Plants (ETP).

Category: Removing bad odour from treated water

Description

As we strive towards a greener and more sustainable future, it's crucial to address the challenges of wastewater treatment. That's where Rapid Oxidizer comes into play, revolutionizing the way we tackle odours in treated wastewater. Completely removes malodour from treated/untreated wastewater. These mighty warriors get to work, breaking down and oxidizing the odour-causing compounds at their source. The result? Fresh, clean water that smells as good as it looks. But that's not all Rapid Oxidizer goes beyond odour control. It also promotes overall health and balance of the wastewater ecosystem by neutralizing odour and hence enhances the efficiency of the treatment process. One of the most remarkable aspects of Rapid Oxidizer is its commitment to sustainability. This eco-friendly solution is biodegradable, non-toxic, and safe for both humans and aquatic life. NutriServe Rapid Oxidizer is an industrial broad Spectrum controlled oxidizing supplement. This is a powder form of product but to be used by making water solutions.

The application of product is based on its ability to generate Potent oxidizing properties. It is used to neutralize foul odours generated in ETP, Sewage, Industrial Waste, Human and Animal Waste and Stagnant Water, Fish Process Condensate. Diluted solution can be used as an odour Neutralizer in Treated sewage Tanks. Depending on the treatment type, it can be dosed at a fixed rate.

Benefits of using Oxidizer ETP

1. Removes odour from treated ETP wastewater

2. Very effective in processed fish condensate, Processed food, Starch water, Slaughterhouse water, etc.

3. Can be dosed over long periods

4. Powdered form, Quick reaction time

5. No residues after the reaction

Area of application

1. Collection tank

2. Treated water tank

NutriServe Anaerobic is like energy drink for the microbes. NutriServe Anaerobic elevates the vitality and productivity of microbial populations, resulting in more effective organic matter degradation and improved pollutant removal. Speed up the breakdown of complex organic compounds, reducing treatment time.

Category: Aerobic micronutrients, micronutrients for aeration tank

Description

NutriServe Anaerobic is a water soluble proprietary formulation containing mixture of different micronutrients containing the following:

1. Potassium

2. Magnesium

3. Manganese

4. Iron

5. Zinc

6. Molybdenum

7. Calcium

8. Cobalt

9. Copper etc.

NutriServe Anaerobic is stable for minimum of 2 years when stored is cool & dry place.

Benefits

1. Improves MLSS Settling in the clarifier

2. Increased BOD degradation by higher metabolism

3. Increases capability for sustaining BOD shock loads

4. Increases capability for sustaining flow based shock loads

5. Increases break down of complex compounds into simpler forms

How to Use

1. Take 100-200 Liters of HDPE/FRP PP dosing tank.

2. Mix one day dose of NutriServe Anaerobic with raw water and dose the solution by gravity/pumping, continuously spread over 24 hours/day.

3. Place the dosing tank at the Inlet end of biological tank. You can also dissolve NutriServe Anaerobic In the storage tank prior to biological tank so that it mixes with raw effluent/partially treated effluent before It is fed to biological tank.

FAQ

How does biogas production work?

Hydrolysis --} Acidogenesis --} Acetogenesis --} Methanogenesis --} CO2, CH4, H2.

How long does it take to produce?

For mesophellic type of anaerobic digester where the temperature is ~37 degrees, it takes 25 to 40 days for the biogas generation.

Why should I choose Amalgam Biotech for wastewater treatment? Amalgam Biotech provides high-quality bioculture for wastewater treatment that helps improve system performance, reduce sludge, and ensure eco-friendly water management.