Post Buy Requirement
BT
Thane, Maharashtra, India
Add Review

Our Products

  1. Generators 7 Products available
  2. Laboratory Equipments 13 Products available
  3. Lab Stirrer 6 Products available
  4. Hematology Analyzer 5 Products available
  5. Dryers 4 Products available
  6. Biochemistry Analyzer 3 Products available
  7. X Ray Machine 4 Products available
  8. Freezers 15 Products available
  9. Others 58 Products available

Laboratory Equipments #1557300

Chemical Fume Hood

Fume Cabinet (Ductless) for operator protection from fumes whilst undertaking laboratory procedures. This cabinet offers excellent all-round vision and is fully portable. No ducting is required, therefore installation costs are kept to a minimum. Portability of Bigneat cabinets enables positioning in the optimum location, less walking around the laboratory thereby substantially reducing risk. Safer for the environment, no pollution to the atmosphere, filters are removed and bagged for documentation and accredited disposal.Quite operation, less than 50 dBA and low power consumption. Vanometer airflow indicator.
View Complete Details

Elisa Reader

  • Voltage  115-230volts+-10%, 50/60Hz
  • Weight  10kgs
  • Human Machine Interface     Touch Panel/Keypad
  •  Linear Measurement Range 0.000 to 3.500  Absorbance Unit  0.000 to 3.500 whichever is higher , from 0 to 1.5 A +-  3% from 1.5 to 3.5A
  •  Drift  <0.005 A/hr
  •  Photometric Linearity  2.5 A
  •  Optical Measurement  8 channel
  •  Type of Filter  Narrow band interface
  •  Wave length  405nm, 450nm, 492nm, 630nm & four Optional
  •  Half Band width  10nm +- 2nm
  •  Selection  Automatic by stepper Motor
  •  Light source  Tungsten halogen lamp, 20W
  •  Display  6” Graphics LCD, Negative Blue , STN
  •  Curve Plotting  2.5” Graphical Representation on printer  
  •  plate carrier movement  Precisely through the stepper motor
  •  Printer  Built in thermal printer 52 columns
  •  Memory  Battery backup for 250 test & More than 2500results
  •  Analysis Mode  Absorbance(normal & diff.)
  • Wattage  75 Watts
  •  Operating position  On horizontal flat, rigid & vibration free surface
  • Temp.  from +18 C to 35 C
  •  Relative humidity  up to 80%
  • Temp.  from-10 C to 40 C
  •  Enclosure  ABS Fire Retardant
  •  Size (cm)  36 x 36 x 22(LxBxH)

ELISA plate analyzer with user friendly & sophisticated on board software . It is a stand alone system for all routine immunoassays, Biochemicals, hormones & drug levels. Its versatile & extensive software supports most of the calculation required for interpretation of results. It is economical, reliable & high precision machine.

Special Ffeaturers

  • Robust system with built in stabilizer.
  • Built in shaker with variable speed & duration.
  • Results printing in matrix mode format.
  • Option to run multiple blank in Cut off mode.
  • Dichromatic reading.
  • Ability to read from any strip in a single plate.
  • Extensive curve plotting.
  • Unique circuitry for long life of lamp.
  • Facility to enter clinic name.
  • Overload indication.
View Complete Details

BOD Incubators

Temperature Range : 10 C to 60C Accuracy : 0.5CTemperature Uniformity : 1.0C

Temperature Suitable for 18 -24C, 20-25C, 30-35C, 35-37C, 40-45C & 55-60C.

Construction
This unit has double walled chamber, with glass wool/PUF insulation. Interior made of Stainless Steel & Exterior is either made of Mild Steel finished with powder coating or Stainless Steel. This unit has full-length inner glass door and outside metal door with magnetic gasket and lock. The unit is provided with perforated Stainless Steel trays. Forced air circulation for uniform temperature. PU wheels for easy move ability.
Intellligent Control System
Temperature Controller with Ethernet Communication

Heating System

Long lasting stainless steel tubular heaters with s.s. fins.

Sensor
Temperature transmitter 4-20mA used for measurement. Temperature in degree Celsius with 0.1C resolution.

Cooling System
Hermitically sealed compressor coupled with evaporation coil and condenser, safe guarded by time delay circuit. CFC free refrigerant

Alarms
Audio and visual alarms are generated for temperature variation

Safety
The unit is provided with safety devices for temperature over shoot in case of malfunction.

The unit works on 230 Volts AC and 50Hz mains supply.

Eqp- EquipmentShp Shipping

Optional

  • Common Software:Chambers are connected on TCP/IP (Ethernet) with the centralized work station and transferring data in database. This centralized workstation provides the tool for viewing, trending and alarm management of chambers. It has date and time stamp audit trails and complies to US FDA 21 CFR Part 11.
  • Temperature Scanner:4 point scanner for temperature having 4 temperature probes provided with alarms to monitor various parts of equipment.
  • Door Access System:The door access system restricts access to the chamber to authorized persons only. In this system a physical lock is provided additional to this password access control is provided. Maximum six users can access the chamber.
  • Remote Alarm System:Alarm for Temperature & Humidity deviations. Indicator LED to identify equipment deviation. Alarm hooter test push button.
  • Mobile AlertSystem Suitable for Newtronic Equipments whenever the alarm is generated by the system the user has to acknowledge the alarm with in predetermined time. If the user fails to acknowledge the alarm will send as a sms to 6 predefined numbers.

Selection Guide

Exterior M.S. Powder Coated  & Interior S.S.

Interior & Exterior S.S.

Capacity

Internal Dimension

External  Dimension

Weight (Kg)

Tray

Cuft.

Litres

HxWxD (mm)

HxWxD (mm)

Eqp

Shp

(mm)

Nos.

NEC108RTSI

NEC108RTSSI

8

200

600 x 600 x 600

1150 x 760 x 1045

200

275

560 x 560  

2

NEC112RTSI

NEC112RTSSI

12

324

900 x 600 x 600

1450 x 760 x 1045

250

325

560 x 560  

3

NEC116RTSI

NEC116RTSSI

16

430

1200 x 600 x 600

1795 x 760 x 1095

275

350

560 x 560  

4

NEC121RTSI

NEC121RTSSI

21

600

1200 x 700 x 700

1795 x 860 x 1195

300

400

660 x 660  

4

NEC128RTSI

NEC128RTSSI

28

800

1200 x 800 x 800

1795 x 960 x 1295

325

425

760 x 760  

4

NEC134RTSI

NEC134RTSSI

34

1000

1500 x 800 x 800

2095 x 960 x 1295

350

450

760 x 760  

5

View Complete Details

Cooling Incubator

Temperature Range : 2C to 8CAccuracy : 0.5CTemperature Uniformity : 1.0C

Exterior made of Mild Steel and Interior made of Stainless Steel.Exterior and Interior made of Stainless Steel(S).

Construction

This unit has double walled chamber, with PUF insulation. Interior is made of stainless steel & Exterior is either made of powder coated steel or stainless steel. The unit is provided with perforated stainless steel trays for sample mounting. This unit has full-length inner glass door and outside metal door with magnetic gasket and lock. Forced air circulation for uniform temperature, Safety thermostat, hermetically sealed compressor, with electronic time delay to safeguard compressor and PU/Castor wheels for easy move ability.

Temperature Control System

Temperature Controller with Ethernet Communication.

The unit works on 230 Volts AC and 50Hz mains supply.

Eqp- EquipmentShp- Shipping

Optional

  • Common Software:Chambers are connected on TCP/IP (Ethernet) with the centralized work station and transferring data in database. This centralized workstation provides the tool for viewing, trending and alarm management of chambers. It has date and time stamp audit trails and complies to US FDA 21 CFR Part 11.
  • Temperature Scanner:4 point scanner for temperature having 4 temperature probes provided with alarms to monitor various parts of equipment.
  • Stand by Cooling System (Auto Switch Over):A fully functional cooling system can be provided as standby. It comes in operation automatically when the regular system fails to function.
  • Door Access System:The door access system restricts access to the chamber to authorized persons only. In this system a physical lock is provided additional to this password access control is provided. Maximum six users can access the chamber.
  • Remote Alarm System:Alarm for Temperature & Humidity deviations. Indicator LED to identify equipment deviation. Alarm hooter test push button.
  • Mobile AlertSystem Suitable for Newtronic Equipments whenever the alarm is generated by the system the user has to acknowledge the alarm with in predetermined time. If the user fails to acknowledge the alarm will send as a sms to 6 predefined numbers.
View Complete Details

Bacteriological Incubator

Temperature Range : 10 C to 60C Accuracy : 0.5CTemperature Uniformity : 1.0C

Temperature Suitable for 18 -24C, 20-25C, 30-35C, 35-37C, 40-45C & 55-60C.

Construction
This unit has double walled chamber, with glass wool/PUF insulation. Interior made of Stainless Steel & Exterior is either made of Mild Steel finished with powder coating or Stainless Steel. This unit has full-length inner glass door and outside metal door with magnetic gasket and lock. The unit is provided with perforated Stainless Steel trays. Forced air circulation for uniform temperature. PU wheels for easy move ability.
Intellligent Control System
Temperature Controller with Ethernet Communication

Heating System

Long lasting stainless steel tubular heaters with s.s. fins.

Sensor
Temperature transmitter 4-20mA used for measurement. Temperature in degree Celsius with 0.1C resolution.

Cooling System
Hermitically sealed compressor coupled with evaporation coil and condenser, safe guarded by time delay circuit. CFC free refrigerant

Alarms
Audio and visual alarms are generated for temperature variation

Safety
The unit is provided with safety devices for temperature over shoot in case of malfunction.

The unit works on 230 Volts AC and 50Hz mains supply.

Eqp- EquipmentShp Shipping

Optional

  • Common Software:Chambers are connected on TCP/IP (Ethernet) with the centralized work station and transferring data in database. This centralized workstation provides the tool for viewing, trending and alarm management of chambers. It has date and time stamp audit trails and complies to US FDA 21 CFR Part 11.
  • Temperature Scanner:4 point scanner for temperature having 4 temperature probes provided with alarms to monitor various parts of equipment.
  • Door Access System:The door access system restricts access to the chamber to authorized persons only. In this system a physical lock is provided additional to this password access control is provided. Maximum six users can access the chamber.
  • Remote Alarm System:Alarm for Temperature & Humidity deviations. Indicator LED to identify equipment deviation. Alarm hooter test push button.
  • Mobile AlertSystem Suitable for Newtronic Equipments whenever the alarm is generated by the system the user has to acknowledge the alarm with in predetermined time. If the user fails to acknowledge the alarm will send as a sms to 6 predefined numbers.

Selection Guide

 

Exterior M.S. Powder Coated  & Interior S.S.

Interior & Exterior S.S.

Capacity

Internal Dimension

External  Dimension

Weight (Kg)

Tray

Cuft.

Litres

HxWxD (mm)

HxWxD (mm)

Eqp

Shp

(mm)

Nos.

NEC108RTSI

NEC108RTSSI

8

200

600 x 600 x 600

1150 x 760 x 1045

200

275

560 x 560  

2

NEC112RTSI

NEC112RTSSI

12

324

900 x 600 x 600

1450 x 760 x 1045

250

325

560 x 560  

3

NEC116RTSI

NEC116RTSSI

16

430

1200 x 600 x 600

1795 x 760 x 1095

275

350

560 x 560  

4

NEC121RTSI

NEC121RTSSI

21

600

1200 x 700 x 700

1795 x 860 x 1195

300

400

660 x 660  

4

NEC128RTSI

NEC128RTSSI

28

800

1200 x 800 x 800

1795 x 960 x 1295

325

425

760 x 760  

4

NEC134RTSI

NEC134RTSSI

34

1000

1500 x 800 x 800

2095 x 960 x 1295

350

450

760 x 760  

5

View Complete Details

Pathological Centrifuges

Compact Laboratory Centrifuges

R-4C Compact model for routine work in medical and industrial laboratories has digital speed indicator and 0-60 minute digital countdown timer.

R-4C DX has additional features of dynamic brake for quick deceleration & imbalance detector with cutoff in case of uneven loads

Salient Features

> Stepless speed regulator.> Safety Lid interlock to prevent cover opening during centrifugation.> Dynamic brake for quick deceleration (R-4C DX).> Imbalance detector with cutoff (R-4C DX).

View Complete Details

Micro Centrifuges

RM-12C/RM-12C DX

These Centrifuges are ideal for growing routine application in biochemical and clinical labs, for Hematrocrite , Corpuscle Percentage contents in blood , serum analysis and precipitate separation etc. Unit has digital speed indicator and 0-15 minute digital countdown timer.

RM-12C DX has additional features of dynamic brake for quick deceleration & imbalance detector with cutoff in case of uneven load

Salient Features

> Stepless speed regulators.> Safety LId interlock to prevent cover opening during centrifugation.> Digital speed meter and 0-15 minutes digital countdown timer.> Press switch for quick acceleration to full speed.

RM-12C/ BL & R-12M

The new generation of microprocessor based table top centrifuges models use brushless induction motors with frequrncy drive enaling the user to preset speed & time with a high degree of accuracy.

Display os set prameters like speed , time etc make the unit an ideal choice for repetitive sample analysis.

Salient Features

> Brushless Induction motor with frequency drive.> Stable speed output evev under unstable voltage conditions.
> 7 segements LED display of speed (RM-12C BL).> Digital countdown timer.> Safety lid interlock to prevent lid opening during centrifugation.> Dynamic brake for quick deceleration.> Imbalance & Inverter fault detection with auto shutdown.> Alphanumeric LCD display of speed & RCF (R-12M).> Selection of 3 acceleration & deceleration profilies (R-12M).> Automatic door opening through gas hinges.

Rotors Heads Listing

Models

Capacity

Ma.x. RPM

Max. RCF 'g'

RM-1210

Micro Hematocrit Rotor for 24 capillaries (75 x 1 mm)

12000

15300

RM-1211

Micro Hematocrit Rotor for 12 capillaries (QBC-II Plus)

12000

15300

RM-1212

Heparinised capilary tubes (75mm x 1mm bore)

 

 

RM-1213

Reading Device for RM-1210

 

 

Angle heads: (With Glass Tubes) with reduction adaptors of 1 ml & 0.5 ml

RM-1214

10 x 2ml

16000

17500

Angle heads: (With Tapered bottom Polypropylene Tubes) with reduction adaptors of 1 ml & 0.4 ml

RM-1215

24 x 1.5ml

11850

 13400

Angle heads: (With Round bottom Polypropylene Tubes) with reduction adaptors of 4 ml & 2 ml

RM-1216

8 x 5ml

11850

14200

Angle heads suitable for PCR Strip Tubes
RM-1217 4 Strips of 8 x 0.2ml

12000

11910

View Complete Details

Microprocessor Research Centrifuges

Compufuges model PR-23 & PR-24 are Microprocessor controlled centrifuges used in auxiliary laboratories in industries, Educational & Research institutions. Bio Technology, Medical Laboratories, Hospitals, Blood Banks, Pharmaceutical laboratories and agriculture soil testing for determination of moisture equivalent of soil. It is also suitable for determination of settlement of paints, pastes, cosmetics and food products. Centrifuges rotors & carriers are also suitable for use with variety of falcon & vacutainer tubes.

Salient Features

> Stepless speed regulator with zero start interlock> Digital speed inidicator> Dynamic brake> 0-99 minutes digital count down timer> Imbalance detector with cutoff> Safety llid interlock to prevent cover opening during centrifugation

Technical Data

 Models

 

R-23

R-24

PR-23

PR-24

 Max Speed rpm 6900 17300 7000 20000

 Max. RCF

'g'

7350

27440

7560

37570

 Max. Tube size ml 200 100 250 100

 Max. Capacity

ml

1200

400

1200  

400
 W x D x H mm 400 x 500 x 455 400 x 500 x 440

 Supply: 220-240 Volts 50 Hz Single Phase.

View Complete Details

Refrigerated Centrifuges

Refrigerated Centrifuges are useful for centrifugation of temperature sensitive material and find applications in routine and research work in auxiliary laboratories in industry, Educational & Research institutions, Bio Technology, Medical Laboratories, Hospitals, Blood Banks, Pharmaceutical laboratories etc

The user has a choice of different types of control, i.e. Electronic Controls or Microprocessor based Controls. User can select models as per their requirements from - high volume low speed Centrifuge model C-23 BL / CPR 23, low volume high speed centrifuge model C-24 BL / CPR 24 in table top design & C-30 BL / CPR 30 a compact high-speed high volume floor standing centrifuge.

Salient FeaturesBrush-less induction motor with frequency drivePrecise speed control and reproducibilityPre setting of speed, temperature and timeSpeed holding accuracy 100 RPMSafety lid interlock to prevent cover opening during centrifugationDigital speed indicator, 0-99 minute digital count down timer with temperature indicatorDynamic brakeImbalance detector with cutoffOver current overheating safety cutoff for motor protection

Additional Features(Microprocessor based models)Interactive alpha numerical LCD displayMenu driven ten programme memoryChoice of 9 acceleration and 9 deceleration profiles and coastingSelf-diagnosis for errorsUnique safety rotor identification

Technical Data

 Models

 

C-23 BL / CPR-23

C-24 BL / CPR-24

C-30 BL / CPR-30

 Max. Speed

rpm

7000

20000

20000

 Max RCF

'g'

7560

37570

 37570

 Max. Tube Size

ml

200

100

200

 Max. Capacity

ml

1200

400

1200

 Lowest Temp.

°C

-8

-8

-0

 W x D x H 

mm

900 x 625 x 565

890 x 627 x 575

615 x 710 x 935

 Connected Load 

KVA

1.6

 Voltage Stabilizer

model

VS-03

 Supply: 220-240 Volts 50 Hz Single Phase

View Complete Details

Incubated Shakers

Orbital shaking incubators are specifically designed to have combined advantage of closely controlled incubation/storage-temperatures with orbital shaking necessary for many laboratory procedures such as tissue cultures, fermentation studies, enzyme reactions, controlled Incubation and aging tests, incorporates hermetically sealed compressor housed below the incubator to provide temperatures below ambient.Brushless Induction drive motor with frequency drive.makes the unit suitable for continuous non-stop operation. Stepless electronic frequency control

ensures gentle start and maintains preset speed.Compact counter balanced drive mechanism ensures high stability and reliability even in continuous operation & uneven load distribution.

Salient Features
> Inner Chamber S.S. 304 & Outer chamber M.S. powder coated with Plexi glass inner door > Variable speed from 20 RPM to 250 RPM.> Digital display of speed with preset facility.> Shaking amplitude 25 mm.> Un i v e r s a l P l a t f o rm t o a c c ommo d a t e interchangeable clamps of assorted sizes fordifferent capacity of flasks. ( maximum capacity) 100 ml x 40 flasks, 150 ml x 34 flasks, 250ml x 23 flasks, 500 ml x 16 flasks, 1000 ml x 9 flasks).> Automatic restart at preset speed in case of power failure.> Digital Display Temperature Controller.

Optional Features

> Chamber illumination with fluorescent or Ultra Violet Lamps.> 0-24 Hrs. Cyclic timer for illumination control.

View Complete Details

Plant Growth Chamber

  • Certification Ce Certified, Iso 9001:2008
  • Application For Uses In Plant Growth And Testing Chamber, Laboratory Usage
  • Weight 100-1000kg, 1000-2000kg
  • Color Brown, Grey, Light White, White
  • Voltage 110v, 220v, 380v, 440v
  • Condition New, Used
  • Application Agriculture, Lab Usage
  • Automatic Grade Automatic, Semi Automatic
  • Power 1-3kw, 3-6kw, 6-9kw, 9-12kw
  • Driven Type Electric
  • Warranty 1year, 2years, 5years
View Complete Details

Refrigerated Centrifuge

  • Certification CE Certified, ISO 9001:2008
  • Weight 10-20Kg, 20-30Kg, 40-50Kg, 5-10Kg
  • Color Blue, Brown, Grey, LIght White, White
  • Voltage 110V, 220V
  • Condition New, Used
  • Automatic Grade Automatic, Fully Automatic, Semi Automatic
  • Power 1-3kw, 250-500Wt
  • Warranty 1 Year, 2 Years, 5 Years
  • Driven Electric, Pneumatic
View Complete Details

Laboratoty Incubators

  • Temperature Range 5°C to 60°C
  • Accuracy ± 0.5°C
  • Temperature Uniformity ±1.0°C

Construction

This unit has double walled chamber, with PUF insulation. Interior is made of Stainless Steel and Exterior is either made of Mild Steel finished in powder coated steel or Stainless Steel. The unit has full-length inner glass door and outside metal door with magnetic gasket and lock. This unit is provided with Mesh type trays.

Control Systems

Digital Display Microprocessor based temperature controller.

The unit works on 230 Volts AC and 50Hz mains supply.

Eqp- EquipmentShp- Shipping

Optional

  • Ethernet Communication port for PC Communication
  • Common Software:Centralized work station for viewing, trending performance of equipment. Software complies to US FDA 21 CFR Part II

Selection Guide

 

Exterior M.S. Powder Coated Interior S.S.

Exterior S.S Interior S.S

Capacity

Internal Dimension

External Dimension

Weight (Kg)

Tray

Cuft

Litres

H x W x D 
mm

H x W x D 
mm

Eqp

Shp

Nos.

(in mm)

NEC 101

NEC 101S

1

30

280 x 300 x 360

500 x 410 x 555

31

35

1

260 x 320

NEC 102

NEC 102S

2

50

400 x 400 x 320

620 x 510 x 515

38

43

1

360 x 280

NEC 103

NEC 103S

3

90

450 x 450 x 450

670 x 560 x 645

47

52

2

410 x 410

NEC 105

NEC 105S

5

121

600 x 450 x 450

820 x 560 x 645

85

160

2

410 x 410

NEC 108

NEC 108S

8

200

600 x 600 x 600

820 x 710 x 795

150

225

2

560 x 560

NEC 112

NEC 112S

12

324

900 x 600 x 600

1215 x 760 x 875

175

250

3

560 x 560



View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Deepak Choudhary (CEO) (Bioline Technologies)
  • 404, Shanti Dham Heights, Old Mumbai Pune Road, Parsik Nagar, Kalwa (W), Thane, Maharashtra - 400605, India
  • Share us via