Medical Pumps #1522379

This device is used to administer prescribed doses of nutrients or medicines into the patients circulatory system. It can be arterial or intravenously used as well. The machine can inject controlled amount of medicines into the persons body at set time intervals. There are three types of infusion pumps available with the manufacturer. They are:-

• A regular infusion pump
• Bolus: 600ml/h
• Flow rate range: 1-600ml/h
• Volume limit: 1-9999 ml
• Accuracy:5
• KVO flow rate: 1ml/h, keep vein open KVO rate
• Power supply: AC100-240V, 50/60 Hz, 25VA
• Water Proof: IP *I
• Battery: Rechargeable lithium polymer battery, 7.4 V 1650mAh
• Electrical safety: compliance with the requirements of IEC 60601-1.
• Maximum Power consummation is 25W
• Battery recharge: When the pump is connected to the AC power, the battery will recharge automatically. It takes around 8-14 hours to recharge fully, it can then run for more than 5 hours continuously.
• Fuse Type: 220V 2A*212V 2A*2
• Display or information: Flow rate, volume limit, accumulated volume, power indicator light, bed number, air occlusion.
• Alarm function: Infusion completion, occlusion, air bubble, low battery, control abnormal, no AC power supply, installation error.
• Max. size of outer shell: 120*140*190 mm-length* width* height
• Max. weight:2.5 kg
• Classification: Type B.
• Outer shell material is of ABS plastic
• operating condition: Environment temperature:+5- +40, atmosphere
• pressure 50-106kPa, related humidity 30%-90%
• Storage and transport condition: Environment temperature -15- +50
• Pressure 50-106kParelative humidity 30%-90%.
• Applicable infusion pipe: All standard infusion pipe use "double dove" to test
• EMC: Complies with IEC/EN60601-1-2 and IEC/EN60601-2-24.

A superior infusion pump with facilities like night mode working, body-weight mode conversion, 3 level occlusion alarm settings, dual-CPU monitoring system etc. Its details are as follows:-

syringe pumps are special ICU equipments, which facilitate automatic injecting of prescribed medicines into the patients body. There are three types of syringe pumps:-

Syringe pump single channel: - its features are as follows;

• It can identify and specify syringe type.
• It has three level alarms setting for occlusion.
• It can automatically reduce impact dose after occlusion.
• It facilitates PURGE button activation for protection.
• It has a fast flow rate.
• It has effective optic and sound alarm.

It has indication for AC and internal power

• It has an interface of RS232 which is considered standard.
• It can record up to 500 items in the history.

• This is a specialised machine for administering the prescribed doses of injections. It is capable of pushing injections with a volume of anything between 1-100ml medicines.
• Feasible injection rate range:10ml:0.1-100ml 20ml:0.1-200ml/, 50ml:0.1-500ml/h Maximum power consumption: 25VA, running more than 5h after being fully charged.
• Injection increment: 0.1ml/h
• Injection accuracy: 3%
• Bolus: The fastest rate of the size of syringe in use.Displayed information: Rate, accumulated injection volume, Syringe size Battery capacity, Bed No., AC power indicator, Battery charge indicator.
• Accumulated injection volume: 0-999.9m
• Alarm functions: Near, Over, OCCL., low battery, syringe installation error, control abnormal, machine malfunction
• Electrical safety: Comply with the requirement of GB9706.1-1995, EN60601-1and UL60601-1
• EMC(Electromagnetic compatibility); Comply with the requirement EN60601-1-2, EN60601-2-24
• Power supply: 50/60Hz AC100V-240V
• Maximum weight: