Bionics Advanced Filtration Systems Pvt. Ltd - Laboratory Equipments

We design and manufacture wrist action shakers that accommodate to grasp 50 ml to 500 ml conical and cylindrical flasks. Shaking speed 80 to 300 RPM (approx.) oscillations is variable and controlled by smooth speed regulator. This wrist action shaker machine is equipped with adjustable finger clamps that with coordination of excellent oscillation mechanism provide superior level of shaking. Mild Steel outer construction is sturdy and non-slip bottom let you experience worry free performance all the time.

Being compact in size, it occupies very low bench space in laboratories. Loads with advanced features and technical specifications, our laboratory wrist action shakers are the most reliable general purpose laboratory shaker available on the market today. These systems are supplied all over India and overseas at reasonable price.

Refrigerated humidity chambers incorporate refrigeration system in order to make these units suitable for research applications that require very low or freezing temperature. These units are most advanced in technology and rugged in nature. Designed for long service life, these humidity chambers with refrigeration system are fitted with only branded components and instruments.

Our customized refrigerated humidity chambers include wide selection of optional accessories that offer ease of operation and scope of meeting requirements of specific research. Each unit is designed and manufactured at our ISO certified factory. Also called Freeze / Thaw Chambers, our engineering team carefully designs these systems that meet or exceed your expectations.

This mini CO2 Incubator by Bionics Scientific is a reliable, contamination free small sized unit with capacity of 42 liters. This unit is especially designed for smaller laboratories and possesses many advanced features required by professionals to achieve precise results. This small CO2 incubator features 6 sides direct heating, fast heat-up and quick temperature recovery and minimized condensation by front door heater and frame heater. This unit furthermore, offers over heating protection; heating is automatically cut by safety thermostat in case of temperature control failure and excessive heating over set point.

Bionics Scientific is a leading Indian company that manufactures Mini CO2 Incubator systems with 42 liters of capacity and supplies all over India at very reasonable price. These small sized CO2 incubators are designed for IVF and Cell laboratories to meet requirements of small scale research applications. The above system is our standard model that comes in 42 liters capacity, which can also be customized further to meet individual needs.

These CO2 Incubators have unique combination of HEPA filtration and UV Sterilization to provide complete contamination control to ensure accurate results of experiments of the cultivation of animal cells, sperm, ovum, anaerobic cells and all kinds of microbe cells and other special tissues. Lither other units, these systems also offer corrosion free stainless steel construction, artificial intelligence system for precise temperature control, reduced condensation, built-in alarm system, and dual beam IR CO2 sensor for detecting CO2 gas regardless humidity and temperature.

This CO2 Incubator has a UV light installed in the chamber to optimize contamination elimination. A 4w UV is placed up of chamber ceiling and beside of circulation fan. The UV light is not reached to sample and sterilization is operated during culturing.

In addition to UV sterilization, our CO2 incubators also range in variety of options including, plasma sterilization, Multi-gas control, Hot Air Sterilization, copper chamber and split inner door etc. Our standard CO2 UV Sterilization Incubators are available in 42 liters and 180 liters of capacities; however, customized units are also provided on request and of course at reasonable price throughout India and overseas.

Laboratory Fume Hood Stations by Bionics Scientific are available in various sizes and dimensions to meet specific requirements of your research. These fume hoods have a choice of vertical or horizontal sliding sash and MS or stainless steel construction. The standard sizes of our fume hoods are available in most demanded requirements (4ft, 5 ft, 6 ft & 8 ft).

Often known as chemical fume hood, these systems also dilute effect on flammable gases and vapors. Our product range includes general purpose fume hoods, ductless fume hoods, and mobile units; designed with number of optional features and specifications required to meet critical challenges in laboratory research areas worldwide.

Construction: Our fume hood cabinets come with double wall construction made of Epoxy Coated Mild Steel or Stainless Steel as required by customer. It is ensured that the exterior is matched with the base unit. The inner walls and baffles are made of molded reinforced thermoset epoxy resins that meet or exceed NFPA 45 standard on Fire protection for laboratories using chemicals. The jambs are radiuses and aerodynamically designed to reduce the turbulence as the air enters the hood. The construction materials are used as mild steel, type 304 or 316 stainless steel (Epoxy Coated).

Sashes: Our standard models are generally equipped with vertical sashes but as required horizontal sashes can be fixed. The sliding sash rides in 18 gage type 316 stainless steel stainless steel sash guides. Tempered safety glass is used as standard.

Controls: Equipped with easy to use controls which are fixed outside the working area in order to provide convenient working environment. These units have start / stop switches for whole the unit and a light on / off switch.

Lighting: Supplied with fluorescent bulb shielded from the hood interior by laminated safety glass or tempered glass panel. The bulb is operated by a on / off switch and bulb changing process is done from the hood exterior without major disassembly of the unit.

Alarm: Equipped with highly reliable audio / visual alarm device capable enough of detecting a drop or rise in airflow (no static pressure) through the hood unit. If the hood exhausts volume falls below a preset exhaust level, the alarm will alert the operator by sound and visual sign. The monitor also uses dual theristor or dual diode sensing system to measure the velocity. The sensor is mounted in a flow tube placed on either side wall or front face of the fume hood. Local Audible and visual alarms have capabilities for remote monitoring hook up. These systems are designed in both ducted and ductless pattern.

All Fume Hood models are equivalent to international quality standards and are manufacturing under ISO certified quality system. To know more aboutprice list, quotation, warranty and supply details please contact Bionics Scientific. The support team will assist you with precise information you require.

Our company brings to you range of highly reliable, accurate and sturdy testing sieves for grain and particle size analysis. These Testing Sieves are perfectly suitable for laboratory and industrial uses where high quality sieving analysis is required. These test sieves are available in various standard sizes and can be customized to meet special requirements. Sizes are printed on each sieve and separately packed in carton box. All these test sieves are designed and manufactured to meet BSS, ASTM and ISO standards.

Micro Test Sieves: These testing sieves are available in one piece frame of 4" diameter and also available in sizes of 1-1/2", 3", 5" and 6" diameter with suitable lid and receiver (sold extra).

Coarse Test Sieves: These testing sieves of 8", 12" and 18" diameter are available with perforated plates with round or square holes size No. 4.75 to 100 mm. Customized sizes are also available on request.

Fine Test Sieves: 12" and 18" diameter are available in size No. 4 to 500.

Customized Sieves: If you have special size requirements, we can design and manufacture for you, just provide us details and get sieves with exact sizes you need. We also manufacture conical and wet sieves with wooden or stainless steel and aluminum frame.

BOD Incubators are designed to meet incubation criteria required in bod analysis of water and wastewater samples, fermentation studies, plant and insect studies and bacterial culturing etc. Equipping with superior quality instruments, they deliver the performance, quality and reliability required by researchers and clinicians worldwide.

Often called low temperature incubators, our BOD Incubator systems are constructed with corrosion resistance stainless steel and fitted with branded instruments; offering reliable results and comfortable working all the time. The standard models are available from 68 liters to 425 liters of capacities; in addition, we also offer custom designing with choice of construction materials, instruments, optional accessories and other features as per budget of our clients. No doubt, we supply them all over India and overseas at highly competitive price.

Design & Construction
BOD Incubators manufactured here are in various designs; choose from our standard models that are available as undercounter, floor-standing, single and double doors units etc. Each system features temperature range 2C to 60C with uniformity of 0.5C @ 20C. Microprocessor PID controller delivers superior temperature control accuracy, required for precise results. Our features and advantages include illumination lamp, caster wheels for easy mobility, digital timer and quality certifications.

Below mentioned are technical specifications of our standard BOD incubator models, helping you to decide which unit is best suitable for your laboratory and application. If you need any customization in them, please discuss with us, we can modify the equipment and make it suitable for your requirements; GMP models also available.

Options
Our BOD Incubator systems are designed and supplied with variety of options to suit your unique test requirements. We also supply Dissolved Oxygen (DO) meter and pH test meter for further analysis. The equipment can also be equipped with number of additional accessories including humidity system, fluorescent tube lighting, digital timer and humidity control and arrangement for incubation of co2 air mixture. If required, we also provide IQ, OQ, DQ, and PQ validation documents.

These Heated Incubators deliver a range of highly efficient, reliable and cost effective incubator units. With superior temperature uniformity these general purpose incubators are suitable for most biological analysis, research and general laboratory applications. These units are available in compact, benchtop, portable and large sizes.

Heated Incubators come in capacities from 1 cu. Ft. to 34 cu. Ft. Equipping with microprocessor controller; these digital general purpose incubators provide high degree of temperature uniformity. These Heated Incubators are durable and come with Triple walled construction which allows heated air to circulate within an open plenum between the inner chamber and exterior walls.

The storage space and the shelves are made of stainless steel. All general purpose incubator models are equipped with easy to view glass doors. External chamber is constructed of corrosion resistant 304 grade stainless steel sheet and internal chamber is made of stainless steel.

Set-point and actual chamber temperature are digitally displayed. Even temperature calibration is easily performed by touch pad control. A totally independent secondary temperature controller offers the added safety of over-temperature protection.