CHETAS BIOCHEM

Ramchandpura, Jaipur, Rajasthan

we are lubricant oil additive package manufacturer and exporter.

we have all kinds of lubricant oil additives, engine oil additives, hydraulic oil additives,

gear oil additives, industrial oil additives, gear oil additives, coolant additives,

cutting oil additives, mono ethylene glycol(meg), oil soluble dyes, coolant dyes,

smell remover/smell enhancer for rc oil & viscosity index improver polymers (vi polymer).

also manufacture speciality lube oils industrial & automotive.

vi polymer available with us:-

polymer 93xl (clear product with good viscosity)

polymer-v1070

polymer-v1056

polymer-901

lubimax 141(s)

lubimax 181

lubimax 141

sumitomo esprene spo v0132

sumitomo esprene spo v0111

dow nordel ip epdm ip 3745p

dow nordel ip epdm 245 etc.

We are Lubricant Oil Additive Package Manufacturer and Exporter.

We have all kinds of Lubricant Oil Additives, Engine oil Additives, Hydraulic Oil Additives,

Gear Oil Additives, Industrial Oil Additives, Gear Oil Additives, Coolant Additives,

Cutting oil Additives, Mono Ethylene Glycol(MEG), Oil Soluble dyes, Coolant dyes,

Smell Remover/Smell Enhancer for RC oil & Viscosity Index Improver polymers (VI Polymer).

Also manufacture Speciality lube oils Industrial & Automotive.

VI Polymer available with us:-

POLYMER 93XL (Clear Product with Good Viscosity)

Polymer-V1070

Polymer-V1056

Polymer-901

Lubimax 141(S)

Lubimax 181

Lubimax 141

Sumitomo ESPRENE SPO V0132

Sumitomo ESPRENE SPO V0111

DOW NORDEL IP EPDM IP 3745P

DOW NORDEL IP EPDM 245 etc.

CBA003P is high performance multifunctional detergent additive which can be used at a very low treat rate for formulating high performance engine oil for meeting CH- 4 AND CI-4/CI-4 PLUS grades. CBA003P is a highly efficient detergent additive package possessing excellent anti-wear and ant oxidation characteristics and a very low ash content. Diesel Fuel Additives Long term performance Long term benefits have been measured in both light duty and heavy duty vehicles with respect to; Emissions Fuel Economy Power Acceleration Down-Time/Maintenance Data generated through both vehicle trials, dyno-testing and test engines In general, a diesel engine works by using a piston to compress air to increase the temperature in the cylinder and then injecting atomized diesel fuel into this cylinder

RECOMMENDATIONS

CBA003P grade of additives are recommended for use at optimized treat levels (based on specific engine test requirements) in formulating multi viscosity mineral oil base crankcase engine oils meeting requirement of API services category CH- 4 AND CI-4/CI-4 PLUS.

INTRODUCTION

CBA003 (E) is high performance multifunctional detergent additive which can b

e used at a very low treat rate for formulating high performance engine oil for

meeting CH-4 AND CI-4/CI-4 PLUS grades. CBA003 (E) is a highly efficient

detergent additive package possessing excellent anti-wear and ant oxidation

characteristics and a very low ash content

RECOMMENDATIONS

CBA003 (E) grade of additives are recommended for use at optimized treat

levels (based on specific engine test requirements) in formulating multi

viscosity mineral oil base crankcase engine oils meeting requirement of API

services category CH-4 AND CI-4/CI-4 PLUS, MB 228.5, ACEA E 4, E 7

INTRODUCTION

CBA008-P is new technology, high performance all-purpose engine oil additive package using eco-friendly components which can be used at a very low treat rate for formulating high performance engine oil for meeting both Petrol and Diesel vehicle specification.

CBA008-P can be used without any other booster package to meet upto SM grades in Petrol and CH grades in diesel. CBA008-P is a high efficient detergent additive package possessing multiple combinations of individual components so as to give excellent friction resistance, anti- wear and anti-oxidation characteristics, CBA008-P has a very low ash content.

INTRODUCTION

CBA001E is an advanced nano technology additive technology specially designed for formulating 4-stroke motorcycle/Scooter engine oils. Oils blended with Economy 4 Stroke Engine oil additives in a wide range of base stocks will meet the latest JASO MA, JASO T903:2006 requirements including the JASO MA2 friction category for improved clutch performance. It also provides API quality levels ranging from SG to SN, allowing for product line rationalization as well as optimized logistics and storage, reducing overall cost. Economy Four Stroke Engine oil additives are suitable for use in both air-cooled and liquid-cooled 4-stroke motorcycles.

INTRODUCTION

CBA001P is an advanced nano technology additive technology specially designed for formulating premium 4-stroke motorcycle/Scooter engine oils. Oils blended with Premium 4 Stroke Engine oil additives in a wide range of base stocks will meet the latest JASO MA, JASO T903:2006 requirements including the JASO MA2 friction category for improved clutch performance. It also provides API quality levels ranging from SG to SN, allowing for product line rationalization as well as optimized logistics and storage, reducing overall cost. Premium 4 Stroke Engine oil additives are suitable for use in both air-cooled and liquid-cooled 4-stroke motorcycles.

Engine Oil Additive is an advanced nano technology additive technology specially designed for formulating premium engine oils. Oils blended with CBA026 in a wide range of base stocks will meet the latest JASO MA, JASO T903:2006 requirements including the JASO MA2 friction category for improved clutch performance. It also provides API quality levels ranging from SG to SN, allowing for product line rationalisation as well as optimized logistics and storage, reducing overall cost. CBA026 is suitable for use in both air-cooled and liquid-cooled automotive engine.

Diesel Engine Oil Additive is high performance multifunctional detergent additive which can b e used at a very low treat rate for formulating high performance engine oil for meeting CH-4 AND CI-4/CI-4 PLUS grades. CBA003 is a highly efficient detergent additive package possessing excellent anti-wear and ant oxidation characteristics and a very low ash content.

CBA001 is an advanced nano technology additive technology specially designed for formulating premium 4-stroke motorcycle/Scooter engine oils. Oils blended with 4 Stroke Engine oil additives in a wide range of base stocks will meet the latest JASO MA, JASO T903:2006 requirements including the JASO MA2 friction category for improved clutch performance. It also provides API quality levels ranging from SG to SN, allowing for product line rationalization as well as optimized logistics and storage, reducing overall cost. 4 Stroke Engine oil additives is suitable for use in both air-cooled and liquid-cooled 4-stroke motorcycles.

We are Lubricant Oil Additive Package Manufacturer and Exporter.

We have all kinds of Lubricant Oil Additives, Engine oil Additives, Hydraulic Oil Additives,  

Gear Oil Additives, Industrial Oil Additives, Gear Oil Additives, Coolant Additives,  

Cutting oil Additives, Mono Ethylene Glycol(MEG), Oil Soluble dyes, Coolant dyes,  

Smell Remover/Smell Enhancer for RC oil & Viscosity Index Improver polymers (VI Polymer).

Also manufacture Speciality lube oils Industrial & Automotive.

VI Polymer available with us:-

POLYMER 93XL (Clear Product with Good Viscosity)

Polymer-V1070

Polymer-V1056

Polymer-901

Lubimax 141(S)

Lubimax 181

Lubimax 141

Sumitomo ESPRENE SPO V0132

Sumitomo ESPRENE SPO V0111

DOW NORDEL IP EPDM IP 3745P

DOW NORDEL IP EPDM 245 etc.

Multi Grade Engine oil Additive is new technology, high performance All purpose Engine oil additive package using eco-friendly components which can be used at a very low treat rate for formulating high performance engine oil for meeting both Petrol and Diesel vehicle specification, CBA008 can be used without any other booster package to meet up to SM grades in Petrol and CH grades in diesel. CBA008 is a highly efficient detergent additive package possessing multiple combinations of individual components so as to give excellent friction resistance, anti-wear and anti-oxidation characteristics; CBA008 has very low ash content.