Introduction :The Mass Mixer Machine is basically mixing a assembly wherein the mixing stirrer is in horizontal position in the container & have a single speed, simple rotation. The stirrer rotates around it self at a very slow speed inside the bowl and thereby achieving intimate mixing of dry or wet materials of Tablet Granulation, Powder, Chemicals, Food & Confectionaries Materials.Because of a special design feature of machine & stirrer, the mass mixer can be mix the sticky materials & also uniformally and intimately mix the materials which are to be difficult to mix.SPECIAL FEATURESRange of models to suit working volume 50, 100 & 200 Kgs. At bulk density of 0.50 gms/cc. All contact parts are made out of S.S.304 quality material.(SS316 provided on demand on extra cost) Compact design requires comparatively smaller floor space. Single stirrer with single speed for dry & wet mixing. As stirrers sealings comes in contact with product, there may be any black particle contamination problem, after sealing bush got wear & tear. All non contact parts (general structure)made out of mild steel and claded with SS304 or crome plated or made out of SS304 in GMP Model. Contact parts are polished to the mirror finished and non contact parts are polished to the matt finished in GMP Model. All safety guards & covers made out of SS304 material in GMP model & made out of mild steel & painted in standard model. General structure & all non contact parts are made out of Mild Steel & same will painted in Standard Model. All moving parts are enclosed with safety guards. Thrust bearings are provided to carry out rigid thrust load. Easy for cleaning & operating. Simply designed SS304 dust cover provided with one port for material charging & inspection. Interlocking system with top dust cover, to avoid accident, during process. The container tilting system provided for easy unloading of material and easy cleaning. Specially design all moving parts provided with provision of easy lubrication. OPTIONALSS316 product contact parts instead of SS304. Variable speed drive or double speed of stirrer provided on extra cost , if required. Flameproof model.

OPERATIONThe Double Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously. All the contact parts made out of stainless steel of required grade by customer. Two third of the volume of the Cone Blender is filled to ensure proper mixing. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc. SALIENT FEATURESThe conical shape at both ends enables uniform mixing and easy discharge. All contact parts are made out of stainless 304 or 316 quality material, as required by customer. Maximum care has been taken to ensure safe operation of the unit. Manual rotating facility with hand wheel for inching. The same will be provided with ss cover & limit switch. ( In 200 Kgs. & above model ) Two nos. of safety road will be provided at back side. ( One LH side & one RH side ) Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with openable cover provided at other end of the cone for material charging & cleaning. One shaft with 04 nos. of fixed buffels with mirror polished provided inside the cone. Cone will be mirror polished from the inside & outside & structure will be matt polished. All moving parts covered with SS304 covers. Safety guards made from SS304 pipes provided in front of the m/c with limit switch. Panel fabricated from SS304 material with facility of three phase indication, D.O.L. tarter, digital timer & Amp. Meter. As per customer requirement machine will be provided with left side drive or with right side drive. The conical shape at both ends enables uniform mixing and easy discharge. All contact parts are made out of SS304/316(as per customer requirement) quality material. Maximum care has been taken to ensure safe operation of the unit. Worm reduction gear use for speed reduction. Food grade rubber gasket will be used on both end of cone as well as in butterfly valve.

OPERATIONThe RIBBON BLENDER is an efficient and versatile blending machine for mixing of dry granules & powders homogeneously. Approximate two third of the volume of the container of Ribbon Blender is filled to ensure proper mixing. The Ribbon Blender gives best result for mixing of dry powder & granules due to the design and shape of the mixing ribbon and product container. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc. Material should be charge from the top side. There are port/ports should be provided on the top cover to charge the material as well as for air vent. One discharge valve provided at the bottom side at center of the container. The discharge height could be adjust as per the requirement, so that material gets discharge in the other container directly, so that material handling time for discharge is nil and the operation is dust free. In Ribbon Blender the powder moves from center to the end of container and end of container to the center of container. Hence requirement of total mixing time is very less and the RPM required are also very less. The dry material gets sufficient contineous movement due to the shape & movement of ribbon & shape of the container., which moves material for good quality of blending. The unit is consist of one electrical motor, one worm reduction gear, belt drive between motor and gear, couple drive between gear to ( ribbon ) mixing stirrer. Container having four nos. of legs with discharge valve & top cover. Both end of mixing shaft is sealed with bush & PTFE gland housing & safety guards are provided on all moving parts.SPECIAL FEATURESThe shape of container and mixing stirrer gives sufficient contineous movement to the powder / granules, result in good quality. All contact parts are made out of SS304/SS316 or SS316 L quality material. Maximum care has been taken to ensure safe operation of the unit. Inching facility for stirrer for discharge of material. Full cover on top side of the container. height must be adjusted, if confirm with order. panel provided for safe operation of blender. Centrally located material Discharge valve. ( Butter fly / Sliding Valve ) Dust proof top cover with window provided. General structure completely made out of mild steel & painted in Standard Model & the same is claded with SS304 in GMP model. Safety Guards & Covers made out of SS304 in GMP Model & made out of mild steel in Standard Model. Legs made out of M.S & painted in Standard Model & same will be claded with SS304 in GMP Model. Panel provided with following facilities in 500 Liters & bigger model. In Small model only D.O.L. starter provided for On-Off operation of the motor. Three phase indication facility. D.O.L. starter for on-off operation of motor. Emergency stop provided in panel. Digital timer for batch time setting. Ampere meter to indicate load of motor in ampere. Limit switch provided at top cover for safety purpose. Inching push button with selector switch for inching operation during discharge of material.

OPERATIONThe Double Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously. All the contact parts made out of stainless steel of required grade by customer. Two third of the volume of the Cone Blender is filled to ensure proper mixing. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc. SALIENT FEATURESThe conical shape at both ends enables uniform mixing and easy discharge. All contact parts are made out of stainless 304 or 316 quality material, as required by customer. Maximum care has been taken to ensure safe operation of the unit. Manual rotating facility with hand wheel for inching. The same will be provided with ss cover & limit switch. ( In 200 Kgs. & above model ) Two nos. of safety road will be provided at back side. ( One LH side & one RH side ) Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with openable cover provided at other end of the cone for material charging & cleaning. with 04 nos. of fixed buffels with mirror polished provided inside the cone. be mirror polished from the inside & outside & structure will be matt polished. All moving parts covered with SS304 covers. Safety guards made from SS304 pipes provided in front of the m/c with limit switch. Panel fabricated from SS304 material with facility of three phase indication, D.O.L. tarter, digital timer & Amp. Meter. As per customer requirement machine will be provided with left side drive or with right side drive. The conical shape at both ends enables uniform mixing and easy discharge. All contact parts are made out of SS304/316(as per customer requirement) quality material. Maximum care has been taken to ensure safe operation of the unit. Worm reduction gear use for speed reduction. Food grade rubber gasket will be used on both end of cone as well as in butterfly valve. Inside & outside of the cone will be polished to the mirror finished. General structure made out of SS304 and Polished to the matt / mirror finish ( as required by you ) in GMP Model. All safety guards & covers made out of SS304 in GMP Model. Hand wheel will be provided for manual tilting of cone. Safety guards provided with limit switch to not start the machine when safety guards are not in proper position.

OPERATIONThe RIBBON BLENDER is an efficient and versatile blending machine for mixing of dry granules & powders homogeneously. Approximate two third of the volume of the container of Ribbon Blender is filled to ensure proper mixing. The Ribbon Blender gives best result for mixing of dry powder & granules due to the design and shape of the mixing ribbon and product container. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc. Material should be charge from the top side. There are port/ports should be provided on the top cover to charge the material as well as for air vent. One discharge valve provided at the bottom side at center of the container. The discharge height could be adjust as per the requirement, so that material gets discharge in the other container directly, so that material handling time for discharge is nil and the operation is dust free. In Ribbon Blender the powder moves from center to the end of container and end of container to the center of container. Hence requirement of total mixing time is very less and the RPM required are also very less. The dry material gets sufficient contineous movement due to the shape & movement of ribbon & shape of the container., which moves material for good quality of blending. The unit is consist of one electrical motor, one worm reduction gear, belt drive between motor and gear, couple drive between gear to ( ribbon ) mixing stirrer. Container having four nos. of legs with discharge valve & top cover. Both end of mixing shaft is sealed with bush & PTFE gland housing & safety guards are provided on all moving parts.SPECIAL FEATURESThe shape of container and mixing stirrer gives sufficient contineous movement to the powder / granules, result in good quality. All contact parts are made out of SS304/SS316 or SS316 L quality material. Maximum care has been taken to ensure safe operation of the unit. Inching facility for stirrer for discharge of material. Full cover on top side of the container. Discharge height must be adjusted, if confirm with order. Operating panel provided for safe operation of blender. Centrally located material Discharge valve. ( Butter fly / Sliding Valve ) Dust proof top cover with window provided. General structure completely made out of mild steel & painted in Standard Model & the same is claded with SS304 in GMP model. Safety Guards & Covers made out of SS304 in GMP Model & made out of mild steel in Standard Model. Legs made out of M.S & painted in Standard Model & same will be claded with SS304 in GMP Model. Panel provided with following facilities in 500 Liters & bigger model. In Small model only D.O.L. starter provided for On-Off operation of the motor. Three phase indication facility. D.O.L. starter for on-off operation of motor. Emergency stop provided in panel. Digital timer for batch time setting. Ampere meter to indicate load of motor in ampere. Limit switch provided at top cover for safety purpose. Inching push button with selector switch for inching operation during discharge of material.

OPERATIONThe RIBBON BLENDERis an efficient and versatile blending machine for mixing of dry granules & powders homogeneously. Approximate two third of the volume of the container of Ribbon Blender is filled to ensure proper mixing. The Ribbon Blender gives best result for mixing of dry powder & granules due to the design and shape of the mixing ribbon and product container. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc. Material should be charge from the top side. There are port/ports should be provided on the top cover to charge the material as well as for air vent. One discharge valve provided at the bottom side at center of the container. The discharge height could be adjust as per the requirement, so that material gets discharge in the other container directly, so that material handling time for discharge is nil and the operation is dust free. In Ribbon Blender the powder moves from center to the end of container and end of container to the center of container. Hence requirement of total mixing time is very less and the RPM required are also very less. The dry material gets sufficient contineous movement due to the shape & movement of ribbon & shape of the container., which moves material for good quality of blending. The unit is consist of one electrical motor, one worm reduction gear, belt drive between motor and gear, couple drive between gear to ( ribbon ) mixing stirrer. Container having four nos. of legs with discharge valve & top cover. Both end of mixing shaft is sealed with bush & PTFE gland housing & safety guards are provided on all moving parts.SPECIAL FEATURESThe shape of container and mixing stirrer gives sufficient contineous movement to the powder / granules, result in good quality. All contact parts are made out of SS304/SS316 or SS316 L quality material. Maximum care has been taken to ensure safe operation of the unit. Inching facility for stirrer for discharge of material. Full cover on top side of the container. Discharge height must be adjusted, if confirm with order. Operating panel provided for safe operation of blender. Centrally located material Discharge valve. ( Butter fly / Sliding Valve ) Dust proof top cover with window provided. General structure completely made out of mild steel & painted in Standard Model & the same is claded with SS304 in GMP model. Safety Guards & Covers made out of SS304 in GMP Model & made out of mild steel in Standard Model. Legs made out of M.S & painted in Standard Model & same will be claded with SS304 in GMP Model. Panel provided with following facilities in 500 Liters & bigger model. In Small model only D.O.L. starter provided for On-Off operation of the motor. Three phase indication facility. D.O.L. starter for on-off operation of motor. Emergency stop provided in panel. Digital timer for batch time setting. Ampere meter to indicate load of motor in ampere. Limit switch provided at top cover for safety purpose. Inching push button with selector switch for inching operation during discharge of material.

OPERATIONThe RIBBON BLENDER is an efficient and versatile blending machine for mixing of dry granules & powders homogeneously. Approximate two third of the volume of the container of Ribbon Blender is filled to ensure proper mixing. The Ribbon Blender gives best result for mixing of dry powder & granules due to the design and shape of the mixing ribbon and product container. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc. Material should be charge from the top side. There are port/ports should be provided on the top cover to charge the material as well as for air vent. One discharge valve provided at the bottom side at center of the container. The discharge height could be adjust as per the requirement, so that material gets discharge in the other container directly, so that material handling time for discharge is nil and the operation is dust free. In Ribbon Blender the powder moves from center to the end of container and end of container to the center of container. Hence requirement of total mixing time is very less and the RPM required are also very less. The dry material gets sufficient contineous movement due to the shape & movement of ribbon & shape of the container., which moves material for good quality of blending. The unit is consist of one electrical motor, one worm reduction gear, belt drive between motor and gear, couple drive between gear to ( ribbon ) mixing stirrer. Container having four nos. of legs with discharge valve & top cover. Both end of mixing shaft is sealed with bush & PTFE gland housing & safety guards are provided on all moving parts.SPECIAL FEATURESThe shape of container and mixing stirrer gives sufficient contineous movement to the powder / granules, result in good quality. All contact parts are made out of SS304/SS316 or SS316 L quality material. Maximum care has been taken to ensure safe operation of the unit. Inching facility for stirrer for discharge of material. Full cover on top side of the container. Discharge height must be adjusted, if confirm with order. Operating panel provided for safe operation of blender. Centrally located material Discharge valve. ( Butter fly / Sliding Valve ) Dust proof top cover with window provided. General structure completely made out of mild steel & painted in Standard Model & the same is claded with SS304 in GMP model. Safety Guards & Covers made out of SS304 in GMP Model & made out of mild steel in Standard Model. Legs made out of M.S & painted in Standard Model & same will be claded with SS304 in GMP Model. Panel provided with following facilities in 500 Liters & bigger model. In Small model only D.O.L. starter provided for On-Off operation of the motor. Three phase indication facility. D.O.L. starter for on-off operation of motor. Emergency stop provided in panel. Digital timer for batch time setting. Ampere meter to indicate load of motor in ampere. Limit switch provided at top cover for safety purpose. Inching push button with selector switch for inching operation during discharge of material.