My ExportersIndia

For Buyer

For Seller

For Help

Countronics
gstGST : 09AABHD8394P1ZI Write a Review

Our Products

  1. Limit Controller 11 Products available
  2. Temperature Controller 10 Products available
  3. Data Loggers 7 Products available
  4. Digital Counter 6 Products available
  5. Tachometers 6 Products available
  6. Ammeter 5 Products available
  7. Digital Indicator 5 Products available
  8. Digital Timers 5 Products available
  9. Process Controllers 4 Products available
  10. Instrumentation Equipment 3 Products available
  11. Flow Meters 3 Products available
  12. Measuring Instruments 3 Products available
  13. Electronic Timers 3 Products available
  14. Crane Spare Parts 3 Products available
  15. Reverse Osmosis Plant Parts 2 Products available
  16. Conductivity Meter 2 Products available
  17. PH Meter 2 Products available
  18. Clean Room Equipment 2 Products available
  19. TDS Meters 1 Products available
  20. Digital Display 1 Products available
  21. Calibrating Machine 1 Products available
  22. Calibrators 1 Products available

Digital Counter

Our offered Product range includes 4 Digit Counter without Preset Limit, Programmable Digital Counter, 6 Digit Counter without Preset Limit, Model 254D Programmable Digital Counter and 6 Digit Preset Counter.

4 Digit Counter Without Preset Limit

  • Min. Order (MOQ) 1 Piece
  • Type Digit Counter
  • Size PANEL CUTOUT 41x92 Mm OR 67x67 Mm Or 92x92 Mm
  • Display 4 Digit (0.5 Inch Char Height Red 7 Seg)
  • Range 9999 Counts
  • Reset Input PushButton / Contact
  • Power Supply 230 V AC +/- 10% Or 12 V DC

Features

  • CMOS/LSI Design For High Reliability & Accuracy.,
  • Auto & Single Cycle Operation.
  • Counting by Contact, Pulse, Proximity & Photo Sensor Input.
  • 12V/50 mA DC Output for Proximity Detector/Photo Sensor.
  • Built-in Ni-Cd, Rechargeable Battery Backup if required.
View Complete Details

Programmable Digital Counter

  • Min. Order (MOQ) 1 Piece
  • Size 72mm X 72mm
  • Weight Approx. 375 Gms.
  • Display 6 Digit, 7 Segment LED Display (0.3
  • Range Selectable Least Count Of 0.001, 0.01, 0.1, 1. Maximum Count Of 999999
  • Set Points Two Set Points Each Programmable From 0.001 To 999999
  • Batch Limit Batch Limit Setting From 0 To 999
  • Operating Modes A. Auto Mode B. Manual Mode C. No Limit Mode (Event Counter)
  • Input Frequency A. 0 To 30 Hz B. 0 To 1 KHz
  • Sensor Supply 10V DC, Short Circuit Protected
  • Scale Factor Programmable From 0.001 To 999.999
  • Reset Input A. Front Panel B. Remote Reset
  • Relay Outputs Two Relays, One For Each Set Point; 1 C/O (SPDT) Rated At 5Amp @ 230 V AC
  • Memory Retention 10 Years
  • Configuration Lock Via Rear DIP-Switch To Avoid Changes In Configured Parameters By Mistake
  • Mounting Panel Mounting
  • Operating Temp. 0-50 DegreesC
  • Humidity 95% RH

Features

  • 6 Digit Preset Counter
  • Dual Limits settable with dual relay output
  • Programmable Scale Factor of 0.001 to 999.999
  • Pre-settable Batch Counter
  • Cumulative 6 Digit Counter
  • Up/Down Counting Selectable
  • Normal/Auto-Reset with Time setting
  • Non-Volatile memory to hold settings and counts
  • Program configuration lock at rear
  • External Setting for Slow/Fast for noiseless operation
View Complete Details

6 Digit Counter Without Preset Limit

  • Min. Order (MOQ) 1 Piece
  • Type 6 Digit Counter
  • Weight Approx 300 Grms
  • Range 999999 Counts
  • Reset Input PushButton / Contact
  • Power Supply 230 V AC Or 12 V DC
  • Battery Required 4 Nos 1015 Type
  • Frequency Standard Quartz Crystal
  • Gating Period 1 Sec
  • Memory Activated By Torch Switch
  • Battery Low Indication Provided, Auto Shut Off Facility Built-in
  • Accessories Male Female Rubber Centres, Rubber Disc To Measure Surface Speed Directly

Size

  • PANEL CUTOUT - 4192 mm or 92x 92 mm
  • FRONT FACIA - 48x96mm or 9696 mm
View Complete Details

Model 254D Programmable Digital Counter

  • Min. Order (MOQ) 1 Piece
  • Size 96mm X 96mm. Depth 50mm
  • Weight Approx. 375 Gms.
  • Range Maximum Count Of 9999
  • Set Points Single Set Points Programmable From 1-9999
  • Batch Limit Batch Limit Setting From 0 To 999
  • Operating Modes A. Auto Mode (Time Settable) B. Manual Mode (Delay Set To Zero)
  • Input Frequency 0 To 1 KHz
  • Sensor Supply 10V DC, Short Circuit Protected
  • Multiplying Factor Programmable From 1-99
  • Division Factor Programmable From 1 To 99
  • Reset Input A. Front Panel B. Remote Reset By Rear Terminals
  • Relay Outputs NO-Pole-NC Contact Rated At 5Amp @ 230 V AC
  • Memory Retention 10 Years
  • Configuration Lock By Password
  • Mounting Panel Mounting
  • Operating Temp. 0-50˚C
  • Humidity 95% RH

Features

  • 4 Digit Preset Counter with separate displays for Count and Set Limit
  • Large 0.8 display for count, 0.56
  • Programmable Multiplying and dividing factor.
  • Pre-settable Batch Counter
  • Up/Down Counting Selectable
  • Normal/Auto-Reset with Time setting
  • Non-Volatile memory to hold settings and counts
  • Password for Program configuration lock
View Complete Details

6 Digit Preset Counter

  • Min. Order (MOQ) 1 Piece
  • Size 96 Mm X 96 Mm
  • Display 6 Digit (0.39 Inch Char Height, Red 7 Seg)
  • Range 999999
  • Count Mode Up
  • Output 1 NO-P-NC Change Over Contact 5A/250V AC
  • Reset PushButton / Contact (Pulse Operation Available)
  • Output Mode Auto Repetitive Or Single Cycle
  • Power Supply 230V AC +/- 10% Or 12V DC
  • Operating Temperature 0 - 50°C
  • Storage Temperature -10 To +70°C

Features

  • Input signal suitable for Contact/Make break, Limit switch, Proximity sensor, Photo-electric switch, Infra-red Sensor, Rotary Encoder or any other sensor giving Pulse output.
  • Preset Count settable by front pushwheels
  • Auto/manual mode user selectable
  • For Auto mode, delayed reset time user settable from 1-10sec
  • CMOS/LSI design for high reliability and accuracy. No moving parts as in Electro-mechanical Counters.
  • Reset by Front Push Button or external contact.
  • Special de-bounce circuit to prevent spurious counts in slow speed/contact make break.
  • 12V/75mA DC output for Proximity sensor/Photo sensor.
  • Built in Ni-Cd rechargeable battery back-up for saving count on power down.
View Complete Details

4 Digit Preset Counter

  • Min. Order (MOQ) 1 Piece
  • Size 96mm X 96mm
  • Display 0.56” Red LED 4 digit display for count)
  • Range 0000 To 9999
  • Count Inputs Voltage Pulse: 3V To 30V DC, Potential Free Contact
  • Count Limit User Settable From 1-9999
  • Auto Mode Counter Resets Automatically After Reaching Preset Limit
  • Input Frequency Up To 1KHz
  • Sensor Supply +10V DC
  • Battery Back-Up Retention Of Count On Power Failure Using Internal Rechargeable Ni-Cd Battery
  • Contact Rating NO-P-NC Contacts @5A/220V AC
  • Mounting Panel Mounting
  • Supply Internally Set At 10.5V For Testing 12V Battery
  • Stop 4 For This Function
  • Operating Temp. 0-50˚C

Features

  • Input signal suitable for Contact/Make break, Limit switch, Proximity sensor, Photo-electric switch, Infra-red Sensor, Rotary Encoder or any other sensor giving Pulse output.
  • Preset Count settable by front pushwheels
  • Auto/manual mode user selectable
  • For Auto mode, delayed reset time user settable from 1-10sec
  • CMOS/LSI design for high reliability and accuracy. No moving parts as in Electromechanical Counters.
  • Special de-bounce circuit to prevent spurious counts in slow speed/contact make break
  • 12V/75mA DC output for Proximity sensor/Photo sensor
  • Built in Ni-Cd rechargeable battery back-up for saving count on power down.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us