Reverse Osmosis Plant Parts
Our offered Product range includes 160-TDS TDS Controller and 160-COND Conductivity TDS Controller.
160-TDS TDS Controller
-
Type
TDS Controller
-
Ranges
0-5000ppm
-
Resolution
1ppm
-
Manual Temperature Compensation
Settable 0-100.0˚C
-
Accuracy
0.5% ± 1 Digit
-
Supply
220V AC ±10% @ 50Hz
-
Enclosure Material
Plastic (ABS)
-
Enclosure Size
96x96x110mm
-
Weight
900 Grams
Features
- Auto/Manual temperature compensation selectable
- Cell Factor selectable for both 1.0 and 0.1
- Digital calibration for TDS
- Auto Temp Compensation using PT100 sensor
- Dual set limit with separate relay outputs
- Settable hysteresis for both set limits
- Bright Red LED display with separate display for set limit-1
- Aesthetically designed front panel with membrane switches and ABS cabinet
Display
- 0.56 Red LED 7 segment Display for Conductivity/TDS
- 0.56 Red LED 7 segment Display for Set-Limit-1
Temp. Comp
- Uses PT100, precision temperature sensor (External)
- The Compensation is internally set at 2% per C
Recorder Output
Isolated 4-20mA => 0-2000 (for whatever unit and resolution selected (Maximum termination 250)
Control Output
- Two set of NO-P-NC, 5 Amps potential free Relay Contacts
- Relay 1 ON, for Cond/TDS < Set Limit1 Hysterises1, Relay 1 OFF, for Cond/TDS > Set Limit1
- Relay 2 OFF, for Cond/TDS < Set Limit2, Relay 2 ON, for Cond/TDS > Set Limit2 + Hysterises2
View Complete Details
160-COND Conductivity TDS Controller
-
Min. Order (MOQ)
1 Piece
-
Resolution
Conductivity: 0.01ms Or 0.01µs, TDS: 1ppm
-
Auto Temp. Comp
0-100˚C Using PT100 External Sensor
-
Manual Temp. Comp
Settable From 0-100.0˚C
-
Cond/TDS Calibration
Digital Calibration By Factor Multiplication From 0.75-1.25
-
Accuracy
0.5% ± 1 Digit
-
Supply
220V AC ±10% @ 50Hz
-
Enclosure
Plastic (ABS), Size - 96x96x110mm
-
Low Voltage
Set At 10.5V Internally, For Testing 12V Battery AH
-
Weight
900 Grams
Features
- Auto/Manual temperature compensation selectable
- Conductivity and TDS selectable from front panel
- Cell Factor selectable for both 1.0 and 0.1
- 4 Step Range selection 0.1µs to 199.9ms for conductivity
- Digital calibration for Conductivity/TDS
- Auto Temp Compensation using PT100 sensor
- Dual set limit with separate relay outputs
- Settable hysteresis for both set limits
- Bright Red LED display with separate display for set limit-1
- Aesthetically designed front panel with membrane switches and ABS cabinet
Display
- 0.56” Red LED 7 segment Display for Conductivity/TDS
- 0.56” Red LED 7 segment Display for Set-Limit-1
Recorder Output
Isolated 4-20mA => 0-2000 (for whatever unit and resolution selected (Maximum termination 250)
Control Output
- Two set of NO-P-NC, 5 Amps potential free Relay Contacts
- Relay 1 ON, for Cond/TDS < Set Limit1 – Hysterises1, Relay 1 OFF, for Cond/TDS > Set Limit1
- Relay 2 OFF, for Cond/TDS < Set Limit2, Relay 2 ON, for Cond/TDS > Set Limit2 + Hysterises2
View Complete Details
GST : 09AABHD8394P1ZI
Write a Review
Mr. Prashant Gupta (Countronics)
3/1/29, Industrial Area, Site-IV, Sahibabad, Ghaziabad, Uttar Pradesh - 201010
https://www.dataloggershub.com
Share us via
