Post Buy Requirement
EE
Delhi, India
Add Review

Our Products

  1. Industrial Machinery 15 Products available
  2. Testing Equipments 11 Products available
  3. Drilling Rigs 5 Products available
  4. Grinders, Drills & Power Tools 4 Products available
  5. Laboratory Shakers 3 Products available
  6. Construction Machinery & Equipment 4 Products available
  7. Autoclaves 3 Products available
  8. Load Cell 3 Products available
  9. Measuring Instruments & Equipment 13 Products available
  10. Laboratory Apparatus 46 Products available
  11. Others 93 Products available

Other Products / Services

Mechanical Universal Testing Machine

Loading accuracy as high as 1%, Straining at variable speeds to suit a wide range of materials, Motor driven threaded columns for quick effortless adjustment of lower cross-head to faciliate rapid fixing of test specimen, Continuous roll autographic recorded supplied as standard to enable study of the behaviour of materials, High reading accuracy due to large size and design of dial, Large effective clearance between columns enables testing of standard specimens as well as structures.
View Complete Details

Triaxial Rock Testing System

22.50 Lakh /Piece Get Latest Price
  • Stiffness 1750 kN/mm
  • Measurement +-0.5% FS
  • Capacity 150 to 200 kg/cm 2
  • Capacities 1500 kN
  • Displacement 45 mm
  • Brand Enkay Enterprises
View Complete Details

Motorized Load Frame

45,000 /Piece Get Latest Price
  • Voltage 230 V
  • Phase Single Phase
  • Frequency 50 Hz
  • Brand Enkay Enterprises
  • Platen Diameter 150 mm
  • Capacity 2000 Kg
View Complete Details

Classifications Suite

Product Code:CLS



CLSuite combines our popular grain size distribution program with software for calculating Atterberg limits and soil classifications. This package generates professional quality grain size test reports, Atterberg limits test reports and a USDA textural triangle report.


The software calculates:



Click for a sample Atterberg limits test report
Sieve percentages (i.e., percent finer) and conformance to specification
Fractional percentages (e.g., percent gravel, coarse, medium and fine sand, etc.)
Calculated diameters and various percentages (e.g., D10, D30, D60)
Fineness modulus
Hydrometer results
Coefficients of concavity and uniformity (Cc and Cu)
Natural moisture
Index values (liquid and plastic limit, plasticity and liquidity index)
Soil classifications, including USCS (ASTM D 2487) AASHTO M 145 (also designated as ASTM D 3282), USDA, Burmister and AS 1726, and additional DOT-specific classification systems are freely downloadable from our website



New in version 4
Export reports in .PDF and .XML format (ideal for e-mailing results to clients)
Liquidity index calculation
Natural moisture content
Australian Standard 1726 soil classification and support for Australian Standards AS 1141.11 (grain size), and AS 1289.3.1.1, AS 1289.3.2.1 and AS 1289.3.3.1 (Atterberg limits)
Printed USDA textural triangle report
Fractional grain size percentages can be calculated using the particle size divisions specified by ASTM, AASHTO, Burmister, Wentworth, AS 1726 and various state DOTs
Multiple sample splits for sieve tests
New particle size chart styles, including Wentworth (Phi) and log(size) vs. probability
New chart reports
Container weight database: The software can be set up to keep a list of IDs and weights for sample containers. This new feature allows you to skip weighing moisture content and sieve test sample containers.
Printed charts can include color curves
Selectable chart scales
Chart reports can include a disclaimer and "Tested by" and "Checked by" signature areas
Integrated system means no more switching between your grain size, Atterberg limits and soil classifications modules. Your soil classifications are calculated automatically without you needing to view the USCS, AASHTO, etc. test windows.

View Complete Details

LabSuite

Product Code:LS



LabSuite combines our popular grain size distribution and moisture-density (Proctor) programs with software for calculating Atterberg limits and soil classifications. This package generates professional quality grain size test reports, Atterberg limits test reports, moisture-density reports and a USDA textural triangle report.



Sieve percentages (i.e., percent finer) and conformance to specification
Fractional percentages (e.g., percent gravel, coarse, medium and fine sand, etc.)
Calculated diameters and various percentages (e.g., D10, D30, D60)
Fineness modulus
Hydrometer results
Coefficients of concavity and uniformity (Cc and Cu)
Natural moisture
Index values (liquid and plastic limit, plasticity and liquidity index)
Soil classifications, including USCS (ASTM D 2487) AASHTO M 145 (also designated as ASTM D 3282), USDA, Burmister and AS 1726, and additional DOT-specific classification systems are freely downloadable from our website
Optimum moisture and maximum dry density results; results can be automatically corrected for the presence of oversize (rock) material
New in version 4
Export reports in .PDF and .XML format (ideal for e-mailing results to clients)
Liquidity index calculation
Natural moisture content
Australian Standard 1726 soil classification and support for Australian Standards AS 1141.11 (grain size), and AS 1289.3.1.1, AS 1289.3.2.1 and AS 1289.3.3.1 (Atterberg limits)
Printed USDA textural triangle report
Fractional grain size percentages can be calculated using the particle size divisions specified by ASTM, AASHTO, Burmister, Wentworth, AS 1726 and various state DOTs
Multiple sample splits for sieve tests
New particle size chart styles, including Wentworth (Phi) and log(size) vs. probability
New chart reports
Container weight database: The software can be set up to keep a list of IDs and weights for sample containers. This new feature allows you to skip weighing moisture content and sieve test sample containers.
Selectively omit compaction test points from the moisture-density curve
Moisture-density test results rounding are now selectable on a per-test specification basis (e.g., ASTM D 698 requires rounding the maximum dry density and optimum moisture content to the nearest 0.1, while D 1557 requires rounding to the nearest 0.5)
Latest standards versions, including ASTM D 698-07a, D 1557-07, D 448-03a, and AASHTO T 99-01, T 180-01 and T 224-01
Printed charts can include color curves
Selectable chart scales
Chart reports can include a disclaimer and "Tested by" and "Checked by" signature areas
Integrated system means no more switching between your grain size, Atterberg limitsm, soil classifications and Proctor modules. Your soil classifications are calculated automatically without you needing to view the USCS, AASHTO, etc. test windows, and Proctor oversize corrections are automatically adjusted for the sieve percentages entered for your grain size tests.

View Complete Details

Asphalt Testing Equipment

90,000 /Piece Get Latest Price
  • Voltage 220 V-380 V
  • Brand Enkay Enterprises
  • Maximum Temperature 200 Deg. C
  • Frequency 50 Hz
  • Power Source Electric
  • Material Stainless Steel
View Complete Details

Geotextile Permeameter


Product Code:EKE 254



The Geotextile Permeameter has been designed to meet the test
requirements of water permeablity of Geotextile. It has been made
keeping in view the growing requirement of testing of coir geotextile.
The geotextile is tested in the uncompressed state for permittivity.
The determination of permittivity of geotextile is carried out, either by
using constant head or falling head test procedures. The equipment
can be used for performing tests as per ASTM-D4491-92
The equipment comprises of specimen holder assembly suitable for
73mm & 100mm dia sample, complete with interconnecting tubes
houses inside a metal housing & mounted on a table alongwith a pump
for delivering de-aried water from de-airing below the specimen
holder assembly unit.
A water tank of 60 ltrs. capacity is placed alongside the main
equipment on a steel stand to store and supplies de-aired water
continuously, as required, during the test.
Geotextile permeameter comprises of specimen holder assembly for
holding specimen of dia 73mm. Housing for specimen holder
complete with inlet and outlet valves, head differential measurement
arrangement mounted on a stand and a Water Tank, complete with
water level gauges suitable for falling head and constant head tests.



Optional Extras



Specimen Holder Assembly for 100mm dia specimens.
De-Aired Water Apparatus.
Blanking Die for 73mm dia sample.
Sample collection beaker - 500ml.




View Complete Details

Pneumatic Trainer Kit

The Pneumatic Trainer Kit consist of an ergonomically designed stand with proper working area to build various circuits. All the components are pre-fitted on the working area & duly fitted with 'One Touch Push In Fittings' for easy fitting of PU tubes - which are provided for fast & leak-proof connections. Good quality precision connectors plastic tubing of 4 mm are provided.
View Complete Details

Vee Bee Consistometer

  • DIAMETER 76.2 cm dia.
The Flow Table is designed for determining the workability of portland cement concrete.The Flow Table top is 76.2 cm dia, finely machined from a solid brass casting. The integrally cast ribs are designed for support and strength. The stand is fabricated out of cast iron and is of sturdy construction. Holes for mounting on foundations are drilled in the base plate. The ground and hardened steel cam is designed to drop the table by 12.5 mm.
View Complete Details

Sampling Auger Outfits

Product Code:EKE 001



Standrad:ASTM D 1452



EKE 001:Sampling Auger Outfit, Blade Type, 75mm dia


EKE 002:Sampling Auger Outfit, Blade Type, 100 mm dia


EKE 003:Sampling Auger Outfit, Blade Type, 150 mm dia


Eke 005:Extension Rods, For use with the above mentioned Auger Heads, One metre in length, Threaded at both ends with Hexagonal Couplings.



EKE 00501Handle and T-piece



EKE 00502Spanner, for use with EKE 005



Hand-operated screw-type augers as well as post hole (blade type) augers are available in different sizes as listed above. The screw-type auger can be used both for advancing the hole and for disturbed sampling. The auger outfit is supplied with an extension rod, T-piece and a tubular handle. Additional extension rods are available for sampling at deeper location.

View Complete Details

38 Mm Dia Sampling Tube

Product Code:EKE 006



EKE 008:Sampling Outfit, Heavy DutyThe outfit consists of the following:



EKE 00801:Auger, Blade Type, 150 mm dia with 38 mm dia x 1 m long road, T-piece and a handle


EKE 00802:Extension Rod, Heavy Duty, I m long and 38 m dia


EKE 00803:Spanner, for tightening the extension Rods


EKE 00804:Jarring Link, large, for Driving Samplers, This can be connected to the sampler to EKE 00802
Extension Rod, Eye Hook, Wax container, Methylated Spirit Stove and wax ladle complete as above, in a carrying case.


EKE 016: Split Spoon Sampler, Ref. Standard 1S: 9640


EKE 017: Split Spoon Sampler, With liner Ref. Standrad IS: 9640


EKE 024: 'A' Drill Rod, 1.5 m long, complte with adapter


EKE 13401: Dymanic Cne, Plain 50 mm dia base and cne angle of 60 degree


EKE 13402: Cone Adapter, Wth Standard Threads


EKE 13403: Dynamic Cone, Threaded for Type 'A' Rod coupling


EKE 022: Tripod With Pulley and ladder



For collecting undiaturbed samples of soil at different depths. This kit includes all necessary implemants for boring, driving and melting wax. The outfit, in conjunction with samplers, can be used to collect undisturbed samples to depth of 6 m. If the site conditions permit the depth of operation can be increased by adding extra extension rods.


Sampling Tubes, 50mm to 150 mm dia



These Undisturbed Sampling tubes can be used with EKE 008 Sampling Outfit. Each sampler is 450 mm long and supplied complete wih two end caps, cutting nose, driving head with air outlet value and three C-spanners


Tin Wall Samplers



Each sampler is 600 mm long and has a hardened cutting edge. Samplers can be used with 'A' drill roda or EKE 008 Sampling outfitby selecting suitable sdapters.

Sampler Cat.No. Inside Dia Extra Tube Cat.No. Extra Cutting Nose Cat.No. Extra Driving head cat. No Extra End caps Cat.no/ Extra set of Three c-Spanners Cat.Number
EKE 009 50mm EKE 00901 EKE 00902 EKE 00903 EKE 00904 EKE 00905
EKE 010 100mm EKE 01001 EKE01002 EKE 01003 EKE01004 EKE 01005
EKE 011 150mm EKE 01101 EKE 01102 EKE 01103 EKE 01104 EKE 01105
Sampler cat No. Inside Dia Adapter for use with EKE 008 Adapters for use with 'A' Drill Rod
EKE 012 50mm EKE 01201 EKE 01202
EKE 013 75mm EKE 01301 EKE 01302
EKE 014 100mm EKE 01401 EKE 01402

 

View Complete Details

Automatic Free Fall Hammer

Product Code:EKE 025



EKE 02-501:Anvil


EKE 02502: Front wheel


EKE 00503: Hammer Guide Assembly


EKE 02504: Fall Hammerattached to a flexible rope and drum, operated manually.


EKE 0205: Base Assemblyfor the hammer system with suitable wheels for moving about when attached to a vehichle.


Essential Accessories( included in the standrad outfit)


EKE 016: Spit Spoon sampler


EKE 02: Tripod with Pulley and built in Ladder


EKE 02402: 'A' Drill Rod, 1.0 m long, with adapter



Optional Acessories



EKE 017:Split spoon sampler, with Liner


EKE 13401:Dynamic Coneplain, 50 mm dia bae and come angle of 60 degree


EKE 13402:Cone Adapterwith standard threads


EKE 13403:Dynamic ConeThreaded for Type 'A' Rod Coupling.



It is desighned to deliver equal impact energy in each blow while performing Standard Penetration Test. This is acheived by providing a trigger mechanism to standardise the height of fall and a suitable guide system for maintaning vertically of guide rod and drill rod assembly. The guide system also maintains their alignment throughout the duration of the test. The system is compact and easy to use, provides maximum safety for the operator.

View Complete Details

Hand Operated Extractor

Product Code:EKE 031



EKE 03101: Sample Extractoir Frame, Screw Type with a wire Sample Trimmer


EKE 03102: Jarring Link, For sriving the Sampling Tube of 38 mm dia


EKE 03103: Adapter with Locking Screw, for fitting the 38 mm dia Sampling Tube to Jarring Link


EKE 03104: Split Mould, 38 mm dia x 88 mm long, provided with Quick Release Clamps, It can be fitted to EKE 03101 Sample Extrator


EKE 03105: Split Mould, Same as EKE 03104 But with length of 76 mm


EKE 006: Sampling Tube, Unrelieved, 38 mm dia x 200 mm longpair


The sample extractors shown in this section meet the requirements of Indian, British, ASTN and AASHTO standards.Soil core specimens can be extracted from sampling tubes with minimum disturbance. Specimens of smaller dia can also be extracted from larger size samples.

View Complete Details

Sampleject-HYDROO

Sampleject-HYDRO




Product Code:
EKE 033



This Extractor has been specially designed to overcome the difficulties faced in extracting specimens from longer sampling tubes.



  • High efficiency hydraulic pump

  • Power pack with quick release couplings

  • Manual operation possible on power failure

  • Ejects soil from sampling tubes and moulds upto 60 cm in length and 38 to 150 mm in diameter by a single operation

  • Allows direct transfer of soil from field sampling tubes, Proctor and CBR Moulds into 38 mm diameter tubes with minimal disturbance.



Hydraulic Sample Extruder Electrical-cum-Hand Operated


60 cm piston stroke


50kN pushing force


Adapter rings and ejector discs for 38, 50, 75, 100 and 150 mm diasampling tubes or moulds, included


Electrical-cum-hand operated or only hand operated hydraulicsystem


Built-in safety valve to prevent loading beyond 50kN


Portable, but with facility for floor mounting


Lever for selecting up/down movement of piston


Top-plate for holding upto 6 sampling tubes of 38 mm dia


6 nos. EKE 006 Thin wall sampling tubes of 38 mm dia and 200 mmlength, supplied alongwith.



View Complete Details

Pycnometer

Product Code:EKE 046



Standrad:IS:2386 (Part 3)



Consists of a 1 kg Glass Jar with Brass Cone, Locking Ring and Rubber Seal.


These are supplied as a set of six.


Specific Gravity is the ratio of the weight in air of a given volume of a material at a standard temperature to the weight in air of an equal volume of distilled water at the same stated temperature. The equipment mentioned below can be used to test a wide range of materials from clay to sand and gravel smaller than 10 mm.


View Complete Details

High Speed Stirrer

Product Code:EKE 056



Standrad:IS:2720 (Part 4)



EKE 055: Anderson Pipette Stand



Incorporates a sliding carriage which is operated without transmitting
vibrations to pipette or to sedimentation tube when the pipette is
inserted and withdrawn from the liquid.
Supplied complete with:
EKE 05501 Anderson Pipette, Glass, 10 ml. capacity
EKE 05502 Sedimentation tube, Glass, 500 ml. capacity


Optional Extras
EKE 05601 Dispersion Cup
EKE 05602 Baffle


Designed as a compact bench-mounted laboratory Stirrer for the pretreatment stage of soils before particle size analysis. The mixer spindle operates within a Dispersion Cup which can be fitted with an antisplashing Baffle to improve the efficiency of mixing.
Supplied without cup and baffle.
Suitable for operation on 220 V, 50 Hz, single phase, AC Supply.

View Complete Details

ISS Brass Sieves

The analysis of soil by particle size provides a useful engineering classification system from which a considerable amount of empirical data can be obtained. This helps in ascertaining possible frost action, determining graded filters, selection of grouting materials, designing of cement and asphaltic concrete mixes, etc. Sieving is used for gravel as well as sand size particles.

  Standard IS:460
  Item Code : EKE 053 (20cm dia)
   
 
APERTURE SIZE EKE 053 (20 cm dia)
5.60 mm EKE 05301
4.75 mm EKE 05302
4.00 mm EKE 05303
3.35 mm EKE 05304
2.80 mm EKE 05305
2.36 mm EKE 05306
2.00 mm EKE 05307
1.70 mm EKE 05308
1.40 mm EKE 05309
1.18 mm EKE 05310
1.00 mm EKE 05311
850 microns EKE 05312
710 microns EKE 05313
600 microns EKE 05314
500 microns EKE 05315
425 microns EKE 05316
355 microns EKE 05317
300 microns EKE 05318
250 microns EKE 05319
212 microns EKE 05320
180 microns EKE 05321
150 microns EKE 05322
125 microns EKE 05323
106 microns EKE 05324
90 microns EKE 05325
75 microns EKE 05326
63 microns EKE 05327
53 microns EKE 05328
45 microns EKE 05329
38 microns EKE 05330
Pan and Cover EKE 05350
View Complete Details

Constant Pressure System

Product Code:EKE 081-1



Range : 0 to 16 bar (0 to 16 kg/cm)


Steps of pressure: 0.1 bar (0.1 kg/cm)


Accuracy : +_ 1% of the indicated pressure


Electric supply : 220 v, Single phase, 50 Hz, AC Supply



oil water constant pressure system is an extremelyt versatile apparatus which can be used for a wide range of applications.This system provides an effective to the accepted mercury and water constant pressure system wherew the use of mercury is objectionable and/or laboratory head room is insufficient.The apparatus is desighned to provide confining pressure upto 6 bar (16 kg/cm) to triaxial cells.

View Complete Details

Constant Pressure System

Product Code:EKE 082


Measurement of volume of fluid entering the cell to compensate the change in volume of the sample


The volume of fluid expelled from the pore space of the soil


The direct measurement of the change in lenth and dia of the sample.


This constant pressure system is operated with pneumatic pressure when applied through a compressed air line.Its simple to use an air water constant pressure especially where more than one outlet are to be taken from a single source.


Equipment is provided with three air water interface chambers with individual reegulators to control the outlet pressures at desired pressure levels.The interface chambers are provided with acrylic plastic chambers and two ball valves for outlet and intel of water.The chambers are fixed over a console which houses the three regulators and three pressure gauges.


View Complete Details

Sensivity Volume Change Gauge

Product Code:EKE 084



The apparatus consists of a volume measuring polythene tube running along both sides of a scale and connected at both ends to two mercury traps.


This volume change gauge works on the principle of reversing the direction of flow when the limit of the volume change scale is reached.The number of cycles with the volume of fluid handled in each cycle provide the total volume change, whereas the sensitivity of 0.003 mi/mm with 6 ml volume of fluid per cycle has been realized by this sensitive volume gsuge.

View Complete Details

Data Acquisition System

Product Code:EKE3000


Up to 64 input analogue channels, 32 of which may be digital


Up to 64 tests can be run fully independently


Automatic data collection


Automatic test start and stop conditions


user programmable time intervals for data collection


on board large graphics display and keypad'


Menu driven command selection


Battery backed data storage and real time clock


User programmable time intervals for data collection


on board large graphics display and keypad


ORDERING INFORMATION



EKE 3000 Data logger (basic unit without input channels)



Accessories



EKE3000 -8A 8 Channel internal Analoeue Module


EKE3000-4A 4 channel external Analogue Module


EKE3000-4D-MIT 4 Channel external Digital dial gauge Module


EKE-3000-SG 4 Channel External Analogue Module for strain gauges


EKE3000-APC 8 Channel External Digital Module Interfacing APCs


EKE 3000 SPECIFICATIONS


Analogue channel input : LSCT, Pressure or Load Cell (0-100mV)


Transfuser Excitation Supply :I O V D C


Digital Channel Input : Digital Dial Gauge input (can be used for load, strain or volume)


Local display : Large graphics display (240 x 128 pixels)


Key pad : 20 key


Clock :Battery backed real time clock


Data storage up to 12000 readings for a single channel


Host PC Link Via RS232, 9600 Baud, 8 data bits anbd i stop bit


Network Link Via Rs232, 9600 Baud, 8 data


Power supply 110-240v AC Iph


Dimensions(L X W X H) : 380 X 450 X 150 MM


Weight :8 kg




The EKE3000 data logger is supplied as a fully configrable system, which can be upgraded by adding channel modules.up to 32 interval analogue channels, in block of 8 channels within the logger itself and a further 32 channels can be added externally by daisy chaining junction boxes each with 4 analogue or digital channels.

View Complete Details

Universal Automatic Compactor

Product Code:EKE114-1



Rammer - circular faced 50 mm dia adjustable to 2.6 Kg or 4.9Kg
weight.
Drop - Adjustable to 310 mm or 450 mm.
The equipment is suitable for operation on 220V, 50 Hz, Single Phase,
AC supply


Invariably in every soil laboratory, compaction and penetration testson soils are carried out regularly. The electrically operated mechanicalcompaction process eliminates the tedious hand compaction processand results in a considerable saving of time. With the rammers
provided and two stroke lengths available, the apparatus can be usedto carry out all the normal compaction operations required in soiltesting laboratories including the CBR tests.
This is a new design motor driven mechanical compactor, useful forsoil compaction in 100 mm or 150 mm dia moulds. The rammer travelsacross the mould and the table rotates the mould in equal steps on astable base. The number of blows per layer can be set at the beginning
of the test.

View Complete Details

Automatic Consolidation System

Product Code:EKE0650A



Features:



  • Large LED display

  • Simple 4 key operation

  • Computer controlled operation - daisy

  • chaired to enable multiple tests to be run

  • simultaneously and independently*

  • On board calibration and linearisation

  • Fully automatic loading and unloading

  • sequences*

  • Automatic load application can save test

  • time quite substantially.

  • Space saving - far smaller footprint than

  • conventional dead weight system

  • When used with Window software



ORDERING INFORMATION




EKE0650A Pneumatic Loading Consolidation Frame, completewith built in pneumatic force controller


ACCESSORIES




EKEO285 Transducer Bracket for LSCT transducer
EKEO286 Transducer Bracket for digital dia gaugetransducer
EKE-WINDOW Windows Based Consolidation Software
EKE0545 Air Compressor I0 Bar: w tn 50 litre receiverand 2.5HP motor
EKE0545F Filter for air compressor with auto drain forclean air supply

















































Sample Diameter: 50mm 75mm 100mm
Max. Load: 8000kpa 3500kPa 2000kPa
Maximum Frame Capacity: 15kN (with 800kPa air pressure input)
Resolution: l kPa
Power: I 101240V AC 50160 Hz.
Dimension (L x W x H): 20 x 20 x 43cm
Weight: 29.1 kg
View Complete Details

Standard Penetration Test Set

Product Code:EKE 133



Standrad:Standards IS:2131, IS:9640



EKE 016 Split Spoon Sampler, 50.8 mm OD and 38 mm ID
This sampler consists of:
EKE 01601 Body, split lengthwise
EKE 01602 Shoe, hardened with an inside cutting edge
EKE 01603 Head, fitted with a ball check valve and adapter to connect 'A' type drill rod
EKE 019-1 Drive Weight, Cast Iron, 63.5 kg, 78 mmbore ID approx.
EKE 021 Guide Pipe Assembly, Bore 73 mmOD approx.
EKE 022 Tripod, with Pulley and built-in Ladder



Standard Penetration Test is a powerful tool for measuring thepenetration resistance of the ground and relating it to the degree ofcompactness of cohesionless soil and consistancy of cohesive soil.The results can be used for design of foundations. SPT is widely usedfor measuring the undisturbed strength of the soil and for assessing itsresistance to liquefaction due to ground vibrations caused byearthquakes or other dynamic forces.
The Standard Penetration Resistance is measured as the number ofblows 'N' required to drive a split spoon sampler to a depth of 300 mmusing a 65 kg weight falling freely through a height of 750 mm.

View Complete Details

Load Truss

Product Code:EKE 158



This truss is of welded I-Girder construction in two halves which canbe bolted together when required. The lower chord, the cross piecesfor holding the truss down and the vertical thrust members are all ofwelded box type construction with two channels enclosed andwelded to an I-girder. The anchorages are of a design tried out andperfected at the Central Building Research Institute, Roorkee. Theyconsist of semi-cylindrical pieces, each held down by 1 m long steelspikes, driven in through holes drilled in the semi cylinder. The spikesenter the ground at about 60 to the horizontal, four from each sidespaced along the length of the anchorage. The cross pieces aremoored to the anchorages by channel straps and bolts. Eight suchanchorages are supplied with 200 kN truss. Guy wires with turnbucklesare supplied to keep the truss erect.



Supplied complete with anchorages, guy wire and spikes as described above.



Other models available are :



EKE 159Load Truss, Capacity 300 kN
(30, 000 kgf)



EKE 160 Load Truss, Capacity 500 kN
(50, 000 kgf)

Descri ption EKE-158 EKE-159 EKE-160
Truss 2 parts 2 parts 2 parts
Joists 2 parts 2 parts 2 parts
Anchor spikes 100 150 200
Semi-cylindrical 
anchors
8 12 16
Bolts with nuts for 
anchor straps
16 24 32
Anchor straps 8 12 16
Guy wires with six 
turn buckles
6 6 6
Top Flange splice plate 1 1 1
Small bolts with
nuts for item (8)
8 8 8
Jointing bolts with nuts 8 8 8
Bolts with nuts for 
bottom splice plate
6 6 6
Sledge hammer 1 1 1
Spanners 2 2 2
 






View Complete Details

Fully Automatic Triaxial Tests


Product Code:EKE-110T



The Triaxial loading frame is desighned as a stand unit in which the mechanic, pneumatic as well as the necessary electronic interface to the computer have been installed.The loading frame is available n three embodiments:




  • As a Pneumatic press (load control )

  • As a motorized press (path control)

  • As a pneumatic and motorized press (load and path control)



The new invention relatsto a device comprising an embedded system for industrial process measuring and control technology and for automation.said device comprises a computer an intelligent card eqiipped with a processor and a main memory.one or more function cards that are provided with the functions require for the industrial application and a back plane, to which the intelligent card and the function cards are connected and via which said cards communicate with one another.



The cards are provided exclusively with those functions that are required for the industrial application.


Standards System : Triaxial T



The software installed is desighned for a large number of triaxial studies and controls the tests in a fully automatic mode, records the measurement data generated and calculates and supplies the online graphic as well as evaluation protocols.Even while triaxial studies are in progress, the system shows the measurement results obtained and ghe calculations that have been made.various triaxial tests can be called up by mouse click


path controlled triaxial test (standard)


Load controlled triaxial test (option)


combined system :- K, S, T, P. (one apparatus for all test)


using corresponding mechanical add ins, in addition to the triaxial cell it is also possible to install an oedometer shear box, or test cylinder into the load system for performing the following test in fully automatic mode:


Triaxial test


compression test


shaer test


permeability test (T.Cell)


Extension test (special device)


Dynamic test (special device)




View Complete Details

Fully Automatic CD Tests

Product Code:EKE 110 K




  • Direct connection of the measuring sensor to computer

  • Data Logger is not required

  • Quick Data transfer

  • Calibration and zero Balance of all parameters by software

  • Easy handling by keyboard and mouse Networking

  • Very compact and small device thus laboratory space saving



The operating software installed simultaneously and individuallycontrols each individual test for a wide variety of compressionstudies, records the measurement data generated and calculate andsupplies the Online graphic.
Even while compression studies for other soils are in progress, thesystem can simultaneously, evaluate, calculate and graphicallypresent the results of a soil test in printed form.
Inserting the soil specimen and starting the test is easy; all test entriesrequired are menu controlled.
The operating instructions can be called up ONLINE while makingentries.
The system is calibrated in compliance with International Standards.
The electronics is made up of high-quality elements and designed forcontinuous long-term operation.



Standard devices



EKE 110 K / 1 HID slimline
EKE 110 K / 2 HID slimline
EKE 110 K / 3 HID slimline
EKE 110 K / 6 HID slimline



The most important advantage of the load apparatus is precision aswell as clear design and easy handling.
After the soil specimen has been inserted, the soil test runscompletely automatic

View Complete Details

Core Cutting Machine

Product Code:EKE 202




  • Table Mounted

  • Stable Construction

  • Feed arrangement for cutting

  • Cooling water arrangement

  • Heavy Duty, AC, single phasemotor



This unit is designed for cutting andgrinding cylindrical rock specimensupto NX size. The outfit includes 200mm dia diamond impregnated cutter, afine diamond impregnated grindingwheel, a water supply system andsample holder.



A V-Vice, to hold the sample upto 55mm dia x 140 mm long to be cut parallel and square to the longitudinalaxis is provided. Cores longer than 140 mm can be prepared byreversing the specimen and holding against the vice. A hand feedarrangement is provided to facilitate the specimen with a uniform andsmooth feeding motion.
This unit is provided with a 1HP, single phase, AC motor.

View Complete Details

Lapping Machine

Product Code:EKE 203



Compact tablemodel20 cm dia Topand Adapter tohold polishingcloth or pasteSample Holdersto accommodateupto NX sizeCoresContinuouswater feedarrangementduring operation


This unit is provided with a HP, single phase, AC motorThis bench mounted, single spindle lapping machine is ideally suitedfor the final polishing of mounted rock or concrete specimens. Twosample holders of sample size ordered for are provided with eachmachine as standard supply. Sample holders of other sizes can also beprovided on request. This is a motor driven unit with 450/500 rpm. Aswing-in tap, for continuous water supply during operation, is alsoprovided.
This unit is operated on single phase, 220 V, AC motor


Accessories


EKE 20301 Sample Holderfor Ex size
EKE 20302 Sample Holderfor Ax size
EKE 20303 Sample Holderfor 8 mm size
EKE 20304 Sample Holderfor Bx size
EKE 20305 Sample Holderfor Nx size
Sample Preparation
EKE 201
EKE 202

View Complete Details

Miniature High Pressure Permeameter


Product Code:EKE 205



This equipment is used for determining the permeabilitycharacteristics of soils, solidified soils and rock cores. High pressurepermeability studies can also be carried out using this unit.


The complete outfit comprises



EKE 20501 Mould, 50 mm dia x 100 mm high, with Collar
EKE 20502 Top Plate
EKE 20503 Base Plate, with recess for Porous Stone
EKE 20504 Pipette, 6 mm x 300 mm long
EKE 20505 Reservoir Tank, fitted with 7 kg/cmGauge, Valves, Flow Control Regulator andFoot Pump
EKE 20506 Porous Stone, to fit into Base Plate




View Complete Details

Thickness Gauge

Product Code:EKE 241



Thickness is one of the basic physical properties used to control thequality of many geotextiles and geosynthetics.This equipment is simple to operate and thickness of thegeosynthetics/ reinforcing material can be measured with anaccuracy of 0.002 mm for thickness upto 10 mm. Accuracy is 0.01mm for thickness greater than 10 mm. Simple mechanism is providedto apply desired foot pressure varying from 1 to 10 kPa as per variousinternational standards. Surface plate is grounded and is rust free toenable reproducible results.


View Complete Details

CBR Push Through Test Attachment

Product Code:EKE 24611



In this test, developed by the Corps of Engineers, USA, the geotextilespecimen is clamped to obtain an inside dia of 44.45 mm and force isapplied through an 8 mm dia plunger till failure. The Modified ASTM D-3787 provides for a hemispherical plunger and accordingly EKE 24612has been developed. The puncture strength so obtained is felt toreflect the fabric's ability to withstand aggregate penetration.

View Complete Details

CBR Push Through Test Attachment

Product Code:EKE 248



EKE 13111Overhead Tank
EKE 24801Loading unit, Dead weight type, 300 kPa capacity



Permeability of a geotextile must be substantially greater than that ofthe protected soil, so that water can pass freely from the soil throughthe fabric without build-up of hydrostatic pressure. A high value of thepermeability of the geotextile also infers that partial clogging will notreduce the permeability.
Both Constant and Falling Head permeameters are generally used formeasuring normal permeability known as permitivity. Permeability isdefined as the volumetric rate of flow of water per unit cross sectionalarea under unit hydraulic head across the plain of the geotextile.ASTM D 4491 specifies permeability test using Constant Head andFalling Head Permeameters. The constant head test is carried outusing a head of 50 mm of water.
Specimen diameter is 100 mm

View Complete Details

Data Acquisition Control System

Product Code:EK10



The main characteristics are:




  • High resolution 65.000 points

  • 240*120 pixel blue-white graphic LCD display

  • Standalone full automatic testing capacity



LCD graphics data acquisition and controls system EK10 is designedto control the machine and processing of data from load cells orpressure transducers installed on the compression machine frame.The easy to read LCD graphic display and touch-button data pad keysmake the unit quick and straight forward to operate. All interactionswith the measuring system are via the front control panel by usingsimple menu-driven procedures. The EK10 is contained in light alloyhousing and its design satisfies the ergonomic requirements forvarious use. The Ek10 digital graphic display allows real time load vstime graph. At the end of the test cycle, the results can be stored in thelarge memory or downloaded to a PC in ENKAY software format.Dedicated software package is available for further online dataprocessing, database management and certificate printing.



CPU card by microprocessor 32 bit ARM risk architecture
Can make manual tests if required
Large permanent memory up to 256 test results
RS232C (optional Ethernet) connection at 57600 band
One RS232 serial port for connecting either PC or printer for datatransmission
Two analogical channels, use for Load Cell or pressure transduceA sample type and dimensions can be entered respect to thestandard
18 key touch membrane keyboardEasy to operate with 6 main function keysCan control two frames.

View Complete Details

Vee Bee Consistometer

Product Code:EKE 335
Standrad:IS:10510, IS:1199, BS 1881 (Part 104), AASHTO T126



Consists of a vibrating table, specimen pot, slump cone, graduated rodand, acrylic plate. Suitable for operation on 415 V, 3 phase, 50 Hz, AC Supply.


Flow Test



The Flow Table is designed for determining the workability of portlandcement concrete.
The Flow Table top is 76.2 cm dia, finely machined from a solid brasscasting. The integrally cast ribs are designed for support and strength.The stand is fabricated out of cast iron and is of sturdy construction.Holes for mounting on foundations are drilled in the base plate. Theground and hardened steel cam is designed to drop the table by 12.5mm.

View Complete Details

Concrete Mixer

Product Code:EKE 9891



SPECIFICATION



Mixing Capacity : 40 Ltrs.
Overall Dimension : 910mm (L) x 875mm (W) x 1250mm (H)
Electric Supply : 440 V
Motor : 2 HP, 3 Phase, AC, 960 Rpm



FEATURES




  • Portable & Compact.

  • Adjustable Blades.

  • Simple to clean & maintain.

  • Easy to operate.


The Concrete Mixer has been designed for mixing small quantities ofconcrete used in preparation of concrete cubes, for testing inlaboratories. The purpose of the mixer is to smear mechanically theaggregate surface with cement paste uniformly and produce a mix ofuniform consistency. This in turn gives consistent quality of cubespecimens when casted in the moulds.The Concrete Mixer developed is transportable on wheels. Thedesign of mixing paddles ensure uniform & efficient mixing ofcement & aggregate both in dry & wet conditions. Theequipment can also be put to use for mixing of any other materialin dry / wet conditions. The arrangement helps the operators toaccess the pan contents conveniently & emptying the mixtureafter completion of the operation. The drum is driven off the ribbedbase. The lid with mixing paddles clears off the top of the drum toprovide maximum access to the operator.Operator safety being paramount, the same is ensured byelectrical interlocking switch which trips the supply to the motorof the drum even if the lid is lifted accidentally while the mixeris in operation.

View Complete Details

Concrete Mixer

Product Code:EKE 9701



The mixer consists of a steel vessel of 100 litres capacity, mounted on a frame. The vessel is rotated at 20-22 RPM withthe help of a motor and a reduction gear. The vessel can be tiltedto any angle by a handle. This facilitates mixing and discharge.Blades are provided inside the vessel to mix the materialthoroughly. The large handle strip facilitates manual rotation ofthe drum during power failure. The drum, handle and motor etc.are mounted on a steel frame. This model is provided with twolarge wheels for carting away.Supplied complete, with motor of 1 H.P. along with lead wire.Suitable for operationon 230 V, 50 Hz.

View Complete Details

Tamping Rod

Product Code:EKE 345




EKE 345 Tamping Rod, Steel, 16 mm dia x 600 mmlength rounded at the lower end.For use with Cube and Cylindrical Moulds.


Beam Moulds
Two standard sizes of beam moulds are offered for casting concretespecimens for fiexural strength testing. These mouids are made ofcast iron and are supplied complete with a base plate

View Complete Details

Curing

Product Code:EKE 355-1



24-Hour Cycle from time of mixing.
Controlled 35C or 100C 2C Curing Temperature forConcrete.
Controlled 27C 2C Curing Temperature for grey cement.



The tank has been designed to accommodate 150 mm/70.6 mmcube moulds upto 36/72 cube moulds and fully insulated, completewith a hinged lid, heater, thermostat and recirculation pump. Provisionof two removable racks allowing free circulation of water around eachmould is provided. The pump, drain valves and electrical equipmentare housed in a compartment located at one end of the tank. The tankis heated by a immersion heater under normal conditions andrefrigeration system. For grey cement, the temperature is controlledat 35C or 100C 2C/27C 2C, expect for the 15 minutes afterimmersion of the freshly-made specimens.


EKE 355-1 Curing Tank for 6/1 2 moulds of150 mm/ 70.6 mm size
EKE 355-2 Curing Tank for 12/24 moulds of150 mm/70.6 mm size
EKE 355-3 Curing Tank for 24/48 moulds of150 mm/70.6 mm size
EKE 355-4 Curing Tank for 36/72 moulds of150 mm/70.6 mm size


Accelerated curing :



For warmer water method, Temp. Range : 55 2C


EKE 355-1 ACWAccelerated curing Tank for6 moulds of 150 mm size.
EKE 355-2 ACWAccelerated curing Tank for12 moulds of 150mm size.
EKE 355-1 ACBAccelerated curing Tank for6 moulds of 150 mm size.
EKE 355-1 ACBAccelerated curing Tank for12 moulds of 150mm size

View Complete Details

Hydraulic Jacks

Hydraulic Jacks have multipurpose utility, i.e. application of loads while engaged in field investigation, determination of load carrying capacityof piles in the field. tensioning of wires in pre-cast structures, loading of members of any structure for deformation characteristics, etc. Thejacks are supplied complete with manually operated pumping units fitted with Bourdon tube type pressure gauge and a steel connectingpipe.
High Pressure Flexible Hose Pipe is required for connecting the pumping unit to the HydraulicJack. This is an essential extra to be ordered with any of the above jacks.The hose pipe is available in varied lengths as indicated below:
EKE 47501 High Pressure Flexible Hose, 1 m long
EKE 47502 High Pressure Flexible Hose, 2 m long
EKE 47503 High Pressure Flexible Hose, 5 m long, metallic.All the jacks have a piston travel of 50 mm and jacks upto 500 kN capacity are provided withretraction springs. These are available in the following ranges:

MODEL CAPACITY READABLE 
TO
PISTON DIA
EKE 465 50 kN 0.5 kN 50 mm
EKE 466 100 kN 1kN 75 mm
EKE 467 250 kN 2 kN 75 mm
EKE 468 500 kN 5 kN 110 mm
EKE 469 1000 kN 5 kN 152.4 mm
EKE 470 2000 kN 10 kN 215.4 mm

View Complete Details

W Digital Concrete

This product is suitable for Supervision of the company, quality supervision on site sampling tests as well as testing centers, on site automatically assesment results and print without manual calculation.


Features:-


Lcd large screen high resolution 160 * 160
Low power 2.5 # batreries
Sweet voice report numbers function to improve the efficiency of testing staff.
Using USB Communicated interface then quickly export the computer component data
Easy to operate, the software set the upper and lower rebound values, he outliers can be automatically removed
Test hammer using imported parts, mehchanical parts machining high precision long service life, superior
Technaical Data
Measuring range: 10-60Mpa
Impact Energy : 2.207 J
Spring constant : 785N/cm
Spring extension: 75 mm
The consistency of the sample showing values :

View Complete Details

V Digital Concrete

The host and sensor integeration desighn, easy to operateHigh resolution LCD color screen 176 * 220Large capacity rechargeable lithium ion battery, environmental conservation, long service life.It can be used repeatedly without posts-inputsNon contact metal reflection grating + reflective encoder sensing high accuracyVoice reported, LCD and scale readings are triple guarantee the accuracy of the data.Field work without electricity and still can get the measured results through using the ruler readings.Voice reported can improve the efficiency of work at special environment.(Peer products in the market have no voice and ruler functions)using USB communication interface, then quickly export the computer component dataEasy to operate the software set the upper and lower rebound component dataEasy to operate, the software set the upper and lower rebound values, the outliers can be automatically removedTest hammer using imported parts, mehchanical parts machining high precision long service life superior price than the market peer products.



This product is suitable for supervision of the company, quality supervision on site sampling tests as well as testing centers on site automatically assesment results and print without manual calculation.


Techanical data



Measuring Ranges : 10-60Mpa
Impact energy : 2.207J
Spring constant : 785N/cm
Spring extension: 75 mm
The consistency of the sample showing values: < +_o.5 (Digital output sampling value difference with the cursor readings)
The average rebound values on steel anvil : 80 +_ 2
Display: 16-bit true color, 176 * 220 resolution .5 grades backlight adjustment
Data storage: 300 * 100*16=480000 testing results, 20special test strength curves could also be requested to add of their ownPower: 3.6v/1300m AH lithium battery, charging power adapter 5v/2A. Maximum backlight turn off speech cases continous work for 13 hoursPower consumption: Maximum backlight situation =100 mAVoice off)communication interface: USB2.0 full SpeedWeight : 1.1 kg

View Complete Details

Concrete Testing Product- Measuring Principle Of EKE-UCT-170

Product Code:EKE-UCT-170



Specification



Measuring Range of ultrasonic Transit time :01 us-9999.9 us
Display: 320 x 240 TFT LCD
Connector: BNC/BNC
Operating temperature : 20-50c
Power:6 x AA Rechargable battery
Battery life:continuosly 5 hours with 1.200 V Pulse
Size: 105 (H) x 172 (W) X 68mm (D)
Weight:1, 065 grams (main body with batteries inside)
Warranty:1 year



Ultrasonic wave is well propogated in hard materials, like concrete stone and wood other than sonic wave.The velocity of ultrasonic is affected by length or stiffness of the material.ultracon -170 evaluates the elastic property and measures the depth of crack in concrete structures as well.In order that ultrasonic wave could propogate easily, ultrasonic couplant should be applied to the surface of UT transducers or concrete



TheEKE-UCT-170 Kit
EKE-UCT-170 main body
Carrying pouch
Battery charger
A pair of 52 kHz UT Transducer
RG 58 cable with BNC/BNC connectors
Refrence Block
Instruction Manual.

View Complete Details

Pull-Off Tester Dyna


  • Mobile for use in any location

  • Independent of mains supply thanks to easy running crank drive

  • Constant jerk-free load increase

  • Weights only 3.5 kg (standard unit Z16)



Testing is carried out directly on the structure. It can be measured onany point of the structure. For the determination of the tensionstrength it is not necessary to install test devices prior to the casting ofthe concrete. It is ideal for the evaluation of strength in concreterenovation.



such as plastic coatings, concrete coats, mortars and plasters, bituminous coats and paint finishes and coatings on metal.



TECHNICAL INFORMATION



DYNA Tensile force Resolution Accuracy
Permissible stroke
Z16 16 kN 0.01 N/mm < 2% 3.5 mm
Z6 6 kN 0.01 N/mm < 2% 4.0 mm

View Complete Details

Lime Testing Product

Product Code:EKE 412-2


Standrad:IS:10890



This apparatus has specially been designed to prepare cement mortarfor strength determination as specified in IS:4031. It can also be usedin mixing lime with pozzolonic materials for determination of limereactivity (as per IS: 1727) and for uniform mixing of soils withadditives such as lime, cement, etc.The stainless steel mixing bowl has a capacity of 4.75 litres.The paddle, also made of stainless steel, can have both planetary andrevolving motion for uniform mixing.This equipment is electrically driven at two speeds.




  Revolution of 
paddle (rpm)
Planetary
 Movement of
paddle (rpm)
Low Speed 140 ± 5 62 ± 5
High Speed 280 ± 10 125 ± 10



View Complete Details

Vibration Machine

Product Code:EKE 418-1
Standrad:IS:4031, IS:10080




EKE 414Mould, Steel, for 70.6 mm Cubewith ISI Certification Mark as per IS:10080



Spares



EKE 41801Side Spring
EKE 41802Supporting Springs (Set of four)
EKE 41803Springs, for Fitting Mould (Set of two)
EKE 41804Endless Belt
EKE 41805Belt Guard
EKE 41807Eccentric Shafts with bearing



A specially designed Vibration Machine is used for vibrating the mix inmoulds at a frequency of 12, 000 400 cycles per minute, as perspecifications.
The Vibrator is mounted over coiled springs and the vibrations aredeveloped by means of a revolving eccentric shaft. The centre ofgravity of the vibrator, including the cube and mould, is either at thecentre of the eccentric shaft or within 25 mm below it. The simpledesign of the machine facilitates easy assembly and dismantling ofthe cube moulds. Each machine is certified for its frequency by theNational Council of Cement and Building Materials (NCCBM). Themachine is suitable for operation on 220 V, 50 Hz, single phase, ACsupply. Each machine is supplied with one cube mould (steel) withISI Certification Mark. (On request)

View Complete Details

Electrically Operated

Product Code:EKE 431
Standrad:IS: 1727, 4031



EKE 276Proving Ring, capacity, 4 kN
EKE43101Flexure Test Attachment



For the Transverse test of pozzolana and cement mortar prisms (RilemCembureau test) by single point loading of a 160 mm long prismsupported at 100 mm centres. Smaller loads, less than 10 N, can beapplied and measured with an accuracy of 1% in the upper four-fifthsof the range.The load is increased at the rate of 40-60 N/sec.

View Complete Details

Jaw Crusher

Product Code:EKE 442



EKE 442-SP Single phase Jaw Crusher is also availableon request



Designed to speed-up crushing of aggregates, Ores, Mineral, Coaland similar materials
Compact and rugged for laboratory and small production unitsManganese steel jaws adjustable upto 6 mm opening250 kg materials can be crushed in approx. eight hours
Supported with strong steel frame
Suitable for operation with 440 V, three phase, AC supply

View Complete Details

Lime Testing Product

Product Code:EKE 443



Single phase Pulveriser EKE 443-SP is also availableon request



Designed for grinding materials to produce fine mesh samplesIdeal for use in cement and chemical industries
Self contained grinder with a rotating disc having planetarymovement in vertical plane
Reduces about 450 g quartz type material to 100 mesh in oneminute
Suitable for operation with 440 V, three phase, AC supply

View Complete Details

Cylindrical Metal

Product Code:EKE 454
Standrad:IS:2386 (Part 3)



EKE 45401Measure, 3 liters
EKE 45402Measure, 15 liters
EKE 45403Measure, 30 liters
Supplied Complete with EKE 345 Tamping Rod of 16 m dia x 60 mm long.




The angularity or absence of rounding of the particle of an aggregate isa property which is of importance, because it effects the ease ofhandling of a mixture of aggregate and binder, for example, theworkability of concrete, or the stability of mixtures that rely on theinterlocking of the particles.
The bulk density and voids in between aggregates can beascertained using the following equipment.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • ENKAY ENTERPRISES (ENKAY ENTERPRISES)
  • 605, Padma Tower II 22, Rajendra Place New Delhi-110008 (INDIA)
  • Share us via