It is a heat source that can supply heat of temperature from 300 c to Very Temperatures, It heats a fluid (Thermic Fluid) to required temperatures and the fluid then be passed to process points where heating is required . The heat energy can be extracted from this hot Thermic fluid by means of radiation by circulating the fluid around vessels that need to be heated or by other suitable means and finally recycled to the Thermic Fluid Heater.

Salient Features :

• Fully Automatic.
• User Friendly
• Control Panel.
• High Efficiency
• Compact High
• Quality Coils
• High Overall
• Quality 50, 000 Kcals/hr to 60, 00, 000 Kcals/hr HSD / LDO / FO can be used. Vertical / Horizontal units can be offered.

We are engaged in manufacturing Single drum/Bi-Drum design boilers which are constructed with membrane wall, vertical coil type super heater / horizontal drainable type super heater convective type.

Products Mainly used in these industries : Chemical Food Power Generation Pharmaceuticals Ceramics Bio-chemical

Features :

• Fast reaction to load variations.
• Fully automatic
• Combustion Control System and DCS functioning drum level Leading to less operating staff.
• Pneumatic spreading/ Mechanical dispersal of fuel on the firing equipment which makes sure effective burning of fuel.
• Provided with primary and secondary air to guarantee appropriate turbulence in furnace and facilitate suspension burning of fuel due to proper air-fuel mixing.

With us, buyers can stay completely assured for top-notch products as we make use of the premium material and modern work methods for preparing them. Besides, the material is sourced from the genuine places. We are supported by a well-structured warehousing facility wherein we keep a large stock of products. This unit facilitates us to meet urgent and massive requirements of the customers. Our single drum boilers are designed for the convenient operation and suitable for gas(fired), diesel, heavy oil, etc.

The packaged boiler is so called because it comes as a complete package. Once delivered to site, it requires only the steam, water pipe work, fuel supply and electrical connections to be made for it to become operational. Package boilers are generally of shell type with fire tube design so as to achieve high heat transfer rates by both radiation and convection

The features of package boilers are : Small combustion space and high heat release rate resulting in faster evaporation. Large number of small diameter tubes leading to good convective heat transfer. Forced or induced draft systems resulting in good combustion efficiency. Number of passes resulting in better overall heat transfer. Higher thermal efficiency levels compared with other boilers.

These boilers are classified based on the number of passes :

• The number of times the hot combustion gases pass through the boiler.
• The combustion chamber is taken, as the first pass after which there may be one, two or three sets of fire-tubes.
• The most common boiler of this class is a three-pass unit with two sets of fire-tubes and with the exhaust gases exiting through the rear of the boiler.

The standard refuse (or waste) recovery boiler incinerates solid or liquid waste products. This boiler type is not to be mixed with the recovery boilers used in pulp and paper industry. Therefore, we willalways refer to refuse boilers when talking about waste and recovery boilers when we mean the specific chemical recovery process used in the pulp and paper industry. The combustion of waste differs radically compared to other fuels mostly due to the varying properties of waste. Also, the goal when combusting waste is not to produce energy, but to reducethe volume and weight of the waste and to make it more inert before dumping it on a refuse tip.

Details :

• Waste is burned in many ways, but the main method is to combust it in a grate boiler with a mechanical grate Other ways to burn waste is to use a fixed grate furnace, a fluidized bed for sludge or rotary kilns for chemical and problematic waste.
• Waste is usually mass burned, i.e. it is burned in the shape it was delivered with minimal preparation and separation.
• The main preparation processes are grinding and crushing of the waste and removal of large objects (like refrigerators).
•  Waste has to be thoroughly combusted, so that harmful and toxic components are degraded and dissolved.

For the convenience of customers, we issue an invoice to them including details of transaction. Moreover, we maintain transparency in our payment procedure and dealings. We are flexible enough in meeting the ever-evolving requirements of the customers as we have well-structured and capacious storage space. We efficiently keep stock of products in diverse grades and stipulation.  Food Power Generation Pharmaceuticals Ceramics Bio-chemical

Features :

• Fully automatic
• User-friendly control panel
• High capacity heating system
• Multi-fuel option - heavy oils, light oils and gases Rugged - requires very little maintenance
• User - friendly systems.