Working in assistance with a brilliant inventory management system and capacious storehouse has enabled us to entertain urgent and massive requirements of the customers. The organization is indulged in offering secured payment procedure including both online and offline methods. To maintain more clarity of the transaction, we offer an invoice as well. Synchronizing with the advancements taking place in the industry, we are engaged in providing Forced Circulation Evaporator.

Features :

• Low utility consumption
• Solvent recovery
• Compact Design
• Easy operations
• Durable nature
• Efficiency Forced/Natural Circulation Evaporation is used when boiling of base liquids is undesired.

Details :

• Forced circulation evaporators are used if boiling of the product on the heating surfaces is to be avoided due to the fouling characteristics of the product, or to avoid crystallization. The flow velocity in the tubes must be high, and high-capacity pumps are required. The circulating liquid is heated when it flows through the heat exchanger and then partially evaporated when the pressure is reduced in the separator, cooling the liquid to the boiling temperature corresponding to this pressure.
• The liquid is typically heated only a few degrees for each pass through the heat exchanger, which means the recirculation flow rate has to be high. This type of evaporator is also used in crystallizing applications because no evaporation, and therefore no concentration increase, takes place on the heat transfer surface.
• Evaporation occurs as the liquid is flash evaporated in the separator/flash vessel. In crystallizer applications this is then where the crystals form, and special separator designs are used to separate crystals from the recirculated crystal slurry.
• The heat exchanger (in evaporator parlance sometimes called the "calandria") can be arranged either horizontally or vertically depending on the specific requirements in each case.

Advantages : Circulation evaporators are fairly compact and are easy to clean and operate. They can also be easily adapted according to the product that needs to be obtained. They have a high heat transfer coefficient as well as a high circulation flow, which both work to increase the efficiency of the evaporator.

Raw materials are feedstock for the finished products and thus it becomes crucial to source these inputs only from certified vendors. So, as a reliable name, we do the same. We have installed all the requisite amenities, necessary for making safe side deliveries. Our natural circulation evaporator is available with a quality warranty of 12 months against any manufacturing defects.

The typical Agitated Thin Film Evaporator consists of a tubular heat transfer area with an external heating jacket and a fast-revolving, inner rotor with flexible or rigid wiper elements. The driving speed is adapted to the product being handled, its particular specifications and task.

Key Advantages :

• Good heat conductivity (k-value), even when working with highly viscous and contaminated products Minimal thermal stress, thanks to low operating capacity, therefore a short dwell time (10-20 seconds of mean dwell time) No dead zone, therefore overheating prevented and perpetual high product quality guaranteed Continuous mechanical cleaning of the heating surface prevents incrustations High evaporation rates, due to highly turbulent film and large difference in temperature Gentle evaporation, due to short residence times, rapid conveyance in the heated zone and the constant product film renewal, happens often Combined with suppressed boiling points due to operation under vacuum Reduced need for maintenance because of sophisticated bearings and shaft sealing parts Shorter downtime and assembly time for maintenance and inspection No corrosion as outside surface is usually made of stainless steel Evaporation in one pass, no circulation Small film thickness, no hydrostatic height High turndown ratio and high flexibility for variation in requirements
• Low operating pressure down to 1 micron to reduced boiling temperature Single step drying because of unique designed combination of vertical and horizontal dryers Effective evaporation of concentrated slurries, heat sensitive products, viscous and fouling fluids up to 99% in a single pass Simple installation as the equipment is supplied skid mounted with all inter connecting piping, condensers and vacuum system Applications To concentrate highly viscous products, polluted liquids, salt solutions, oils, resins, etc As a sump evaporator for vacuum rectification columns Sludge drainage

We make sure that the offered lot complies with the stated quality norms, thus check the product quality on several stages. Our organization is one of the steadfast providers of the finest range of our product in Panvel(India). In order to meet the varying demands of our customers, we are involved in providing Rising Film Evaporator.

Features :

• High performance
• Low maintenance
• Tough construction
• High efficiency
• Rust-proof finish
• Sturdiness

Details :

• A rising film or vertical long tube evaporator is a type of evaporator that is essentially a vertical shell and tube heat exchanger.These operate on a "thermo-siphon" principle. Feed enters the bottom of the heating tubes and as it heats, steam begins to form. The ascending force of this steam produced during the boiling causes liquid and vapors to flow upwards in parallel flow. At the same time the production of vapor increases and the product is pressed as a thin film on the walls of the tubes, and the liquid rises upwards. This co-current upward movement has the beneficial effect of creating a high degree of turbulence in the liquid.
• This is advantageous during evaporation of highly viscous products and products that have a tendency to foul the heating surfaces. Usually there must be a rather high temperature difference between the heating and boiling sides of this type of evaporator. Otherwise the energy of the vapor flow is not sufficient to convey the liquid and to produce the rising film.
• The length of the boiling tubes will typically not exceed 23 ft. This type of evaporator is often used with product recirculation, where some of the formed concentrate is reintroduced back to the feed inlet in order to produce sufficient liquid loading inside the boiling tubes.

Applications : There is a wide range of applications for rising tube evaporators, including effluent treatment, production of polymers, food production, thermal desalination, pharmaceuticals, and solvent recovery. In terms of applications within these industries, rising tube evaporators are mainly used as reboilers for distillation columns, or as pre-concentrators or flash evaporators or pre-heaters designed to remove volatile components prior to stripping.

A multiple-effect evaporator, as defined in chemical engineering, is an apparatus for efficiently using the heat from steam to evaporate water. In a multiple-effect evaporator, water is boiled in a sequence of vessels, each held at a lower pressure than the last. Because the boiling temperature of water decreases as pressure decreases, the vapor boiled off in one vessel can be used to heat the next, and only the first vessel (at the highest pressure) requires an external source of heat. While in theory, evaporators may be built with an arbitrarily large number of stages, evaporators with more than four stages are rarely practical except in systems where the liquor is the desired product such as in chemical recovery systems where up to seven effects are used. These evaporators are designed from finest grade materials and most sophisticated techniques in seven evaporating effects. This system offers superior viscosity to treated heat sensitive products including proteins and enzymes. According to the feeding materials, viscosity and properties, these can be fed into the most suitable one effective systems to ensure excellent result.

Features :

• Minimum power consumption
• Easy automatic controlling operation
• Generate reusable condensate water
• Optimum steam economy

Applications :

• Food items Sugar Juices
• Water desalination
• Salt production
• Wood pulp manufacturing

Our organization assures distribution of wholesale as well as retail consignments of the goods as per the jointly decided period. Carrying out systematic quality process at every stage, we keep our quality standards high to gain customers' satisfaction. We are also betrothed in offering to our clients, a consignment of Falling Film Evaporator.

Features :

• User friendly
• Effective performance
• Energy competent
• Low Operation Cost
• High Product Quality
• Compact Design
• falling film evaporator  is an industrial device to concentrate solutions, especially with heat sensitive components.

Details :

• In falling film evaporators, liquid and vapors flow downwards in parallel flow. The liquid to be concentrated is preheated to boiling temperature. An even thin film enters the heating tubes via a distribution device in the head of the evaporator, flows downward at boiling temperature, and is partially evaporated. This gravity-induced downward movement is increasingly augmented by the co-current vapor flow.
• Falling film evaporators can be operated with very low temperature differences between the heating media and the boiling liquid, and they also have very short product contact times, typically just a few seconds per pass.
• These characteristics make the falling film evaporator particularly suitable for heat-sensitive products, and it is today the most frequently used type of evaporator. This type of evaporator is generally made of 48 m (1326 ft) tubes enclosed by steam jackets.
• The uniform distribution of the solution is important when using this type of evaporator. The solution enters and gains velocity as it flows downward. This gain in velocity is attributed to the vapor being evolved against the heating medium, which flows downward as well.
• This evaporator is usually applied to highly viscous solutions, so it is frequently used in the chemical, food, and fermentation industries.

Working in assistance with a brilliant inventory management system and capacious storehouse has enabled us to entertain urgent and massive requirements of the customers. The organization is indulged in offering secured payment procedure including both online and offline methods. To maintain more clarity of the transaction, we offer an invoice as well. Synchronizing with the advancements taking place in the industry, we are engaged in providing Forced Circulation Evaporator.

Features :

• Low utility consumption
• Solvent recovery
• Compact Design
• Easy operations
• Durable nature
• Efficiency Forced/Natural Circulation Evaporation is used when boiling of base liquids is undesired.

Details :

• Forced circulation evaporators are used if boiling of the product on the heating surfaces is to be avoided due to the fouling characteristics of the product, or to avoid crystallization. The flow velocity in the tubes must be high, and high-capacity pumps are required. The circulating liquid is heated when it flows through the heat exchanger and then partially evaporated when the pressure is reduced in the separator, cooling the liquid to the boiling temperature corresponding to this pressure.
• The liquid is typically heated only a few degrees for each pass through the heat exchanger, which means the recirculation flow rate has to be high. This type of evaporator is also used in crystallizing applications because no evaporation, and therefore no concentration increase, takes place on the heat transfer surface.
• Evaporation occurs as the liquid is flash evaporated in the separator/flash vessel. In crystallizer applications this is then where the crystals form, and special separator designs are used to separate crystals from the recirculated crystal slurry.
• The heat exchanger (in evaporator parlance sometimes called the "calandria") can be arranged either horizontally or vertically depending on the specific requirements in each case.

Advantages : Circulation evaporators are fairly compact and are easy to clean and operate. They can also be easily adapted according to the product that needs to be obtained. They have a high heat transfer coefficient as well as a high circulation flow, which both work to increase the efficiency of the evaporator.

Raw materials are feedstock for the finished products and thus it becomes crucial to source these inputs only from certified vendors. So, as a reliable name, we do the same. We have installed all the requisite amenities, necessary for making safe side deliveries. Our natural circulation evaporator is available with a quality warranty of 12 months against any manufacturing defects.

The typical Agitated Thin Film Evaporator consists of a tubular heat transfer area with an external heating jacket and a fast-revolving, inner rotor with flexible or rigid wiper elements. The driving speed is adapted to the product being handled, its particular specifications and task.

Key Advantages :

• Good heat conductivity (k-value), even when working with highly viscous and contaminated products Minimal thermal stress, thanks to low operating capacity, therefore a short dwell time (10-20 seconds of mean dwell time) No dead zone, therefore overheating prevented and perpetual high product quality guaranteed Continuous mechanical cleaning of the heating surface prevents incrustations High evaporation rates, due to highly turbulent film and large difference in temperature Gentle evaporation, due to short residence times, rapid conveyance in the heated zone and the constant product film renewal, happens often Combined with suppressed boiling points due to operation under vacuum Reduced need for maintenance because of sophisticated bearings and shaft sealing parts Shorter downtime and assembly time for maintenance and inspection No corrosion as outside surface is usually made of stainless steel Evaporation in one pass, no circulation Small film thickness, no hydrostatic height High turndown ratio and high flexibility for variation in requirements
• Low operating pressure down to 1 micron to reduced boiling temperature Single step drying because of unique designed combination of vertical and horizontal dryers Effective evaporation of concentrated slurries, heat sensitive products, viscous and fouling fluids up to 99% in a single pass Simple installation as the equipment is supplied skid mounted with all inter connecting piping, condensers and vacuum system Applications To concentrate highly viscous products, polluted liquids, salt solutions, oils, resins, etc As a sump evaporator for vacuum rectification columns Sludge drainage

We make sure that the offered lot complies with the stated quality norms, thus check the product quality on several stages. Our organization is one of the steadfast providers of the finest range of our product in Panvel(India). In order to meet the varying demands of our customers, we are involved in providing Rising Film Evaporator.

Features :

• High performance
• Low maintenance
• Tough construction
• High efficiency
• Rust-proof finish
• Sturdiness

Details :

• A rising film or vertical long tube evaporator is a type of evaporator that is essentially a vertical shell and tube heat exchanger.These operate on a "thermo-siphon" principle. Feed enters the bottom of the heating tubes and as it heats, steam begins to form. The ascending force of this steam produced during the boiling causes liquid and vapors to flow upwards in parallel flow. At the same time the production of vapor increases and the product is pressed as a thin film on the walls of the tubes, and the liquid rises upwards. This co-current upward movement has the beneficial effect of creating a high degree of turbulence in the liquid.
• This is advantageous during evaporation of highly viscous products and products that have a tendency to foul the heating surfaces. Usually there must be a rather high temperature difference between the heating and boiling sides of this type of evaporator. Otherwise the energy of the vapor flow is not sufficient to convey the liquid and to produce the rising film.
• The length of the boiling tubes will typically not exceed 23 ft. This type of evaporator is often used with product recirculation, where some of the formed concentrate is reintroduced back to the feed inlet in order to produce sufficient liquid loading inside the boiling tubes.

Applications : There is a wide range of applications for rising tube evaporators, including effluent treatment, production of polymers, food production, thermal desalination, pharmaceuticals, and solvent recovery. In terms of applications within these industries, rising tube evaporators are mainly used as reboilers for distillation columns, or as pre-concentrators or flash evaporators or pre-heaters designed to remove volatile components prior to stripping.

A multiple-effect evaporator, as defined in chemical engineering, is an apparatus for efficiently using the heat from steam to evaporate water. In a multiple-effect evaporator, water is boiled in a sequence of vessels, each held at a lower pressure than the last. Because the boiling temperature of water decreases as pressure decreases, the vapor boiled off in one vessel can be used to heat the next, and only the first vessel (at the highest pressure) requires an external source of heat. While in theory, evaporators may be built with an arbitrarily large number of stages, evaporators with more than four stages are rarely practical except in systems where the liquor is the desired product such as in chemical recovery systems where up to seven effects are used. These evaporators are designed from finest grade materials and most sophisticated techniques in seven evaporating effects. This system offers superior viscosity to treated heat sensitive products including proteins and enzymes. According to the feeding materials, viscosity and properties, these can be fed into the most suitable one effective systems to ensure excellent result.

Features :

• Minimum power consumption
• Easy automatic controlling operation
• Generate reusable condensate water
• Optimum steam economy

Applications :

• Food items Sugar Juices
• Water desalination
• Salt production
• Wood pulp manufacturing

Our organization assures distribution of wholesale as well as retail consignments of the goods as per the jointly decided period. Carrying out systematic quality process at every stage, we keep our quality standards high to gain customers' satisfaction. We are also betrothed in offering to our clients, a consignment of Falling Film Evaporator.

Features :

• User friendly
• Effective performance
• Energy competent
• Low Operation Cost
• High Product Quality
• Compact Design
• falling film evaporator  is an industrial device to concentrate solutions, especially with heat sensitive components.

Details :

• In falling film evaporators, liquid and vapors flow downwards in parallel flow. The liquid to be concentrated is preheated to boiling temperature. An even thin film enters the heating tubes via a distribution device in the head of the evaporator, flows downward at boiling temperature, and is partially evaporated. This gravity-induced downward movement is increasingly augmented by the co-current vapor flow.
• Falling film evaporators can be operated with very low temperature differences between the heating media and the boiling liquid, and they also have very short product contact times, typically just a few seconds per pass.
• These characteristics make the falling film evaporator particularly suitable for heat-sensitive products, and it is today the most frequently used type of evaporator. This type of evaporator is generally made of 48 m (1326 ft) tubes enclosed by steam jackets.
• The uniform distribution of the solution is important when using this type of evaporator. The solution enters and gains velocity as it flows downward. This gain in velocity is attributed to the vapor being evolved against the heating medium, which flows downward as well.
• This evaporator is usually applied to highly viscous solutions, so it is frequently used in the chemical, food, and fermentation industries.