Fluidics Engineers Private Limited

Saravanampatti, Coimbatore, Tamil Nadu

These valves protect the hydraulic system from excessive pressure, and can be used to maintain constant pressure in a hydraulic system. Remote control and unloading are permitted by vent circuits.

Solenoid Controlled Relief valves These valves are a combination of relief valve and solenoid valve. Piping between the two is eliminated as the solenoid valves is directly mounted on the relief valve and connected with the relief valve vent. Pump pressure may be unloaded remotely by an electrical signal to the solenoid, or by connecting pilot relief valves to the solenoid valve ports

DSG01 Solenoid Operated Directional Valve

WIDE RANGE OF MODELS–Choose the optimum valve to meet needs from a large selection available. The DSG-01 50 series solenoid operated directional valve comes with two basic models:

Standard type ——- Useable at high pressure, high flow [315Kgf/cm2 , 63L/min.]

Shockless type ——- which greatly reduces noise, which is a result of spool changeover and vibration in pipes.

Solenoid Controlled Pilot Operated Directional Valve

These valves are composed of a solenoid operated pilot valves and a pilot operated slave valve. When a solenoid is energised the pilot valve directs the flow to move the spool of the slave valve, thus changing the direction of flow in the hydraulic circuit.

High Pressure High Flow

High pressure [315 Kgf/cm2 ] along with high flow means compact system design.

Lower pressure Drop

System energy saving increased as pressure drop of each valve has greatly reduced

In-Line Check Valve

These valves allow free flow in one direction and prevent flow in the reverse direction. Cracking pressure specified is the pressure required to open the valve and allow free flow.

“G” Series Shockless Type Solenoid Operated Directional Valves (Shifting Time Adjustable)

 The G-Series Solenoid Operated Directional Valves incorporate electronic circuits to enable adjustment of the spool shifting time. A special spool shape that minimizes shock is used, shock caused by the actuator starting and stopping, as well as vibration due to oil hammering. The shifting time of conventional Solenoid Operated. Shockless, Directional Valves is constant and cannot be adjusted. As the shifting time of the G-Series valves can be adjusted, it can be set at an optional level to minimise shocks to the machine.

Proportional Electro-Hydraulic Pilot Relief Valves

The valve can be used as a pilot valve of the Proportional ElectroHydraulic Control valves. The valve can also be used as a relief valve for the hydraulic system where a small flow rate and continuous pressure control are required.

Proportional Electro-Hydraulic Relief Valves

These valves, consist of a small size but high performance EH series electro-hydraulic proportional pilot relief valve and a low noise type relief valve. The valves control the system pressure proportionally through a controlled input voltage.