Filter Components #42614

We are offering gps stainless steel filter housings are made out from ss316ss304 material with innovative features like lower pressure drop at higher flow rate, larger connections, robust knife-edge, zero bypass and leak proof sealing. They are sealed with top seated buna-nsiliconviton* o ring by positive tangential contact that eliminates accidental misplacement. All housings have been tested and passed the hydrostatic leak and burst pressure to ensure consistence safe performance. *viton is a registered trademark of dupont. bag filters vessels can be manufactured to accept pp rubber snap collar bags of reputed make. all filter vessels are supplied complete with ss retainer basket and standard rubber o-ring.

We are offering atlas filtri filter housing plus 3p and 2p for cartridges sx. Plus sx is a full range of housings designed to fit to standard sx (doe) cartridges with height from 4'' to 20''. The housings are made in 2 main versions:- 3p housings for cartridge height at 5'', 7'', 10'', 20''. - 2p housings for cartridge height at 4'', 7'', 10''. All 3p and 2p housings are available as single, duplex and triplex models. With female inout configurations at 12'', 34'' and 1'', with bsp or npt threads, with or without brass inserts, and with male inout configurations at 12'', 34'' and 1'' with bsp threads, plus sx housings are suitable for every point-of-entry (poe) application, as single or multi-stage on-line filters. Plus sx housings are manufactured with the finest and most advanced materials under constant focus on innovative processing technologies and ceaseless modernization to ensure the absolute quality of our products. The housings are certified under the most stringent certification procedures and standards: dm 25 (italy), acs (france), nsfansi (usa), gost (russia). All models are available with clear and opaque blue bowls. Custom combinations of colors are available upon minimum quantity. A full set of accessories is available on demand to complete the housings kit: wall brackets, opening spanner, diffuser tubes and brass or plastic nipples with o-ring.

We are offering atlas filtri filter housing plus 3p for cartridges bx and sx. Range of housings designed to fit to exclusive bx cartridges with 45 mm double o-ring collar and to exclusive cx cartridges with 57 mm double o-ring collar. The housings are made in 2 main versions:- 3p bx housings with female inout configurations at 12'', 34'' and 1'', with bsp or npt threads, with or without brass inserts, and with male inout configurations at 12'', 34'' and 1'' with bsp threads; for cartridge height at 5'', 7'', 10'', 20''. All 3p bx housings are available as single, duplex and triplex models. - 3p cx housings with female inout connections 1''14, 1''12, 2'' with bsp threads, with or without brass inserts; for cartridge height at 10'', 20''. Plus 3p bx and plus 3p cx housings for cartridges 10'' and 20'' are available also as s models with discharge valve and self-cleaning performance. S models can be used with kit auto for automatic flushing and self-cleaning. Plus 3p bx housings are available also as m models with 2 manometers. Plus 3p bx and plus 3p cx housings are suitable for every point-of-entry (poe) application, as single or multi-stage on-line filters. Plus bx housings and are manufactured with the finest and most advanced materials under constant focus on innovative processing technologies and ceaseless modernization to ensure the absolute quality of our products. The housings are certified under the most stringent certification procedures and standards: dm 25 (italy), acs (france), gost (russia). All models are available with clear and opaque blue bowls. Custom combinations of colors are available upon minimum quantity. A full set of accessories is available on demand to complete the housings kit: wall brackets, opening spanner, brass or plastic nipples with o-ring.

We are offering atlas filtri filter housing mignon plus for cartridges mignon sx. Mignon plus is a range of single and duplex housings with reduced dimensions designed to fit to exclusive 5''m sx (doe) cartridges with od (outer diameter) 50 mm, height 5''. The housings are made in 2 main versions 3p and 2p with 3 inout ports configurations:- l models with in-line connections, inout at 12'' and 34''. - s models with 90 connections, inout at 12''. - sl models with 3 ports connections, inout at 12''. Mignon plus sx housings are manufactured with the finest and most advanced materials under constant focus on innovative processing technologies and ceaseless modernization to ensure the absolute quality of our products. The housings are certified under the most stringent certification procedures and standards: dm 25 (italy), acs (france), gost (russia). All models are available with clear and opaque blue bowls. Custom combinations of colors are available upon minimum quantity. A full set of accessories is available on demand to complete the housings kit: wall bracket for duplex models, opening spanner, diffuser tube.

We are offering atlas filtri filter housing fx af and xx with stainless steel tightening clamp.Housings fx af with 34'' and 1'' inout connections fit to exclusive bx cartridges with 45 mm double o-ring collar.Housings fx af with 1''12 and 2'' inout connections fit to exclusive cx cartridges with 57 mm double o-ring collar.Housings xx with 34'' and 1'' inout connections fit to standard sx (doe) cartridges.Housings xx with 1''12 inout connections fit to exclusive cx-s cartridges featuring special end-cap configurations: cx 57 mm double o-ring collar on top and standard sx on bottom end-cap. Cx-s cartridges are hold in place into the housing by a threaded tightening bar.

We are offering atlas filtri filter housing dp for cartridges sx and bx. Dp is a full range of housings for cartridge height at 5'', 7'', 10'' and 20'', especially designed to fit to both standard sx (doe) cartridges and to bx cartridges with 45 mm double o-ring collar. Exclusive mono, duo and trio patented and registered models are manufactured with the finest and most advanced materials under constant focus on innovative processing technologies and ceaseless modernization to ensure the absolute quality of our products. Dp housings are certified under the most stringent certification procedures and standards: dm 25 (italy), acs (france), gost (russia). With female inout configurations from 14'' up to 1''12, with bsp or npt threads, with or without brass inserts, and with male inout configurations at 12'', 34'' and 1'' with bsp threads dp housings are suitable for every point-of-use (pou) and point-of-entry (poe) application, as single- or multi-stage on-line filters, under-sink filters, reverse osmosis pre-filtration units. A wide range of combinations with clear and opaque bowls and colored heads make it possible to respond to every custom requirement upon minimum quantity. Every housing is provided with filterfit, the centering device which holds cartridges perfectly standing into the housing. Dp 10 mono housings for cartridges 10'' and 20'' are available also as s models with discharge valve and self-cleaning performance. S models can be used with kit auto for automatic flushing and self-cleaning. Dp mono housings are available also as m models with 2 manometers. A full set of accessories is available on demand to complete the housings kit: wall brackets for mono, duo and trio models, opening spanner, standing bases and brass or plastic nipples with o-ring.

We are offering atlas filtri filter housing dp ds with rotational connection group. Dp ds is a brand new range of housings with 360 rotational connection group for easy connection to horizontal or vertical pipes, available in two versions with bsp inout male connections suitable for every point-of-entry (poe) application- dp ds mp models with rotational group made from high-strength plastic, resulting from atlas filtri r&d for performing materials and innovative manufacturing processes. Dp ds mp housings are provided complete with 34" and 1" nipples (dp ds mp 34+1). - dp ds mo models with rotational group made from brass. Models with 34" nipples (dp ds mo 34) or with 1" nipples (dp ds mo 1). Dp ds housings are suitable for both cartridges with standard sx flat seals (doe) and for cartridges with bx quick-fit double o-ring end-cap, with height at 5", 7", 10" and 20". Are manufactured with the finest and most advanced materials under constant focus on innovative processing technologies and ceaseless modernization to ensure the absolute quality of our products. A wide range of combination with clear and opaque bowls and colored heads make it possible to respond every custom requirement upon minimum quantity. Every housing is provided with filterfit, the centering device which holds cartridges perfectly standing into the housing. The opening spanner is accessory available on demand.

We are offering atlas filtri dp big filter housing. Brand new range of housings designed to fit to ''big'' filter cartridges with outer diameter (od) from 4'' to 4.50'', inner diameter (id) 1.10'', height at 10'' and 20'' with standard sx (doe) configuration. With female inout connections at 1'' and 1''12, with bsp or npt plastic threads dp big housings are suitable for every domestic point-of-entry (poe) or every industrial application when heavy-duty performance is a must. Besides the standard models, dp big are also available with features new to the market:- m models with 2 manometers- s models with discharge valve and self-cleaning performance. S models can be used with kit auto for automatic flushing and self-cleaning. - s m models with discharge-valve and 2 manometers. Dp big housings are manufactured with the finest and most advanced materials under constant focus on innovative processing technologies and ceaseless modernization to ensure the absolute quality of our products. Dp big housings are certified under the most stringent certification procedures and standards: dm 25 (italy), gost (russia). All models are available with clear and opaque blue bowls. Custom combinations of colors are available upon minimum quantity. A full set of accessories is available on demand to complete the housings kit: metal wall bracket, opening spanner and brass nipples with o-ring.

As soon as the product is packed, we ensure that it reaches the customer in the dedicated time slot and for that we have well maintained shipping facilities available. To stock our product for wholesale distribution, we have a state-of-the-art storage facility equipped with the latest inventory control management system. It enables us to meet bulk or retail requirements with ease.

 

Product Description : We are offering an exclusive quality range of Industrial Cartridge Filter System that is highly appreciated by our users spread all across the nation. In order to cater with the variety of application requirements of our clients, the offered system is manufactured as per the latest market developments by our experts. Available in standard dimensions, our offered system can also be customized on special demands of our clients.

Features :

• Longer service life
• Smooth functionality
• Sturdy construction

Specifications : Industrial Cartridge Filter Systems (Metallic) 10 to 70 cartridge length Flow capacity up to 1500 m³/hr from single housing Duplex SS 2205 / Super Duplex 2507 / SS316L / SS316 / SS304 / MS / CS materials with Rubber / Teflon lining or coating Suitable for 2.5, 4.5, 6 and 8 diameter cartridges 1 to 250 cartridges in single housing Mirror / Matt / Paint finish Coded or Non-coded design option Double Open End (DOE) / 222 and 226 Single Open End (SOE) Threaded / Flanged / V clamp connection

The material that is used for the production complies with high quality standards and quality-proved by the experts. Also, we make sure that the raw material is sourced from the trusted places. In order to attain complete client credibility, we offer several options to the clients. Also, we make sure that the transaction is completely secure and confidential.

Owing to our huge logistics network, timely delivery of the placed orders is always executed! To pack our products, we have ultramodern machines. The packaging materials are nontoxic, sturdy and reliable. The products remain safe and undamaged in our packaging.

We have parted our infrastructure into several units and one of them is storehouse. We update it on regular basis so as to meet stated industry standards. We are here to guide our clients with the secure payment procedures. With us, the customers get convenience to pay through both online and offline payment methods

Purchasers will not be disappointed buying our range of product, as it adheres to industrial quality regulation systems. From traditional payment methods to modern ones, we are familiar with all of these payment methods. According to the suitability of patrons, we ensure the payment for an order is done conveniently.

 

Product Description :

• DP is a full range of housings for cartridge height at 5½, 7½, 10½ and 20½, especially designed to fit to both Standard DOE cartridges and to SOE cartridges with 45 mm double O-ring collar.
• Exclusive Mono, Duo and Trio patented and registered models are manufactured with the finest and most advanced materials under constant focus on innovative processing technologies and ceaseless modernization to ensure the absolute quality of our products.
• With female IN/Out configurations from 1/4½ up to 1½1/2, with BSP or NPT threads, with or without brass Inserts. DP housings are suitable for every Point-of-Use (POU) and Point-of-Entry (POE) application, as single- or multi-stage on-line filters, under-sink filters, Reverse Osmosis pre-filtration units.
• A wide range of combinations with clear and opaque bowls and colored heads make it possible to respond to every custom requirement upon minimum quantity. Every housing is provided with FilterFit, the centering device which holds cartridges perfectly standing into the housing.
• DP 10 Mono housings for cartridges 10½ and 20½ are available also as S models with discharge valve and self-cleaning performance. S models can be used with Kit Auto for automatic flushing and self-cleaning.
• A full set of accessories is available on demand to complete the housings kit -  wall brackets for Mono, Duo and Trio models, opening spanner, standing bases and brass or plastic nipples with O-ring.

Working Conditions :

• Max working pressure - 8 bar (116 psi)
• Max working temperature - 45^oC (113^oF)
• Min working temperature - 4^oC (39, 2^oF)

Specifications :

• Non-toxic materials, suitable for drinking water.
• Head - reinforced polypropylene.
• Bowl - PET.
• O-ring - EPDM.
• Breather-valve -  body stainless steel, O-ring EPDM. · IN/Out
• Brass threads - CW 614 N brass. Products from Atlas Filtri, Italy

Be it online payment processing or offline payment processing, we are capable of executing both as per your convenience. We take care of all your transactions made; by this, we make all the procedures transparent. Development of modular control inside our warehouse helps in proper organization of the products and ensure complete safety while storage. The entire system is properly managed by our warehousing experts.

 

Product Description : Plus Hot 3P is a range of housings applicable for hot water with special FA-Hot wound polypropylene cartridges, with CPP polypropylene melt-blown cartridges and with RA stainless steel net cartridges.

The housings are made in 2 main versions :

• Hot 3P housings for SX cartridges with standard flat seals (DOE), height at 5½, 7½, 10½, and 20½.
• Hot S 3P housings with bottom discharge valve, for SOE cartridges with 45 mm double oring collar, height at 10½ and 20½. With IN/Out configurations at 1/2½, 3/4½ and 1½, with BSP or NPT plastic threads Hot 3P Plus housings are suitable to a wide range of applications for hot water filtration.
• Plus Hot 3P housings are manufactured with the finest and most advanced materials under constant focus on innovative processing technologies and ceaseless modernization to ensure the absolute quality of our products.  A set of accessories is available on demand to complete the housings kit - wall bracket, opening spanner.

Working Conditions :

• Max working pressure - 8 bar (116 psi)
• Max working temperature -  80^oC (176^oF)
• Min working temperature - 4^oC (39.2^oF)

Specifications :

• Non-toxic materials.
• Head and ring nut - reinforced nylon.
• Bowl -  reinforced nylon.
• O-ring - EPDM.
• Breather-valve -  body polypropylene, o-ring EPDM.
• Discharge ball-valve -  CW 617 N brass nickel plated.
• Discharge plastic nipple - reinforced polypropylene.
• Drain funnel - reinforced polypropylene. Products from Atlas Filtri, Italy

Product Description : 3P PP is a range of single and duplex housings applicable for the filtration of water with non-neutral pH and for other liquids with suitable cartridges with standard SX flat seals (DOE) - FA wound polypropylene cartridges, CPP polypropylene melt-blown cartridges and AC multilayer cartridges. Height at 5, 7, 10, 20.

 

The housings are made in 2 main versions :

• 3P PP housings with standard EPDM o-ring, for standard application in water filtration.
• 3P PP V housings Viton® o-ring, for application with non-neutral water. With IN/OUT configurations at 1/2, 3/4 and 1 with BSP plastic threads PP 3P housings are suitable to a wide range of applications for water filtration.
• PP 3P housings and are manufactured with the finest and most advanced materials under constant focus on innovative processing technologies and ceaseless modernization to ensure the absolute quality of our products.
• A set of accessories is available on demand to complete the housings kit - wall bracket, opening spanner.

 

Working Conditions :

• Max working pressure in water with neutral pH - 8 bar (116 psi)
• Max working pressure in water with non-neutral pH - 3 bar (43 psi)
• Max working temperature - 45^oC (113^oF) Min working temperature - 4^oC (39.2^oF)

 

Specifications :

• Non-toxic materials, suitable for drinking water. 
• Head and ring nut - polypropylene.
• Bowl - polypropylene.
• O-ring - EPDM, Viton®
• Breather-valve - polypropylene, o-ring EPDM, Viton®. Products from Atlas Filtri, Italy

We have a team of quality inspectors who check the entire lot of raw material on several counts, prior to procurement. Thus, quality of the finished products is never fortified. As a trusted name, we make use of only premium packaging material to pack the products in order to ensure their complete safety during transit. Moreover, our packaging experts strictly check the same.

Due to our streamlined packaging system, we are capable to fulfill bulk and customized packaging requirements of the clients. In addition to this, we ensure complete safety of the products. Keeping the quality standards high, we make certain that prior to production, the inputs (raw material) are examined by the professionals to make the final product free from defects.

 

Product Description : Introduction Gopani offers Polyfilt UPVC Cartridge & Bag Filter housings that have excellent resistance to UV and atmospheric oxygen. Polyfilt housings are unaffected by salts, hence are ideal for sea water and corrosive fluids; substituting SS housings in many cases. Polyfilt are highly recommended fro use in electronic industry, sewage treatment, beverage, foods, pure water treatment and home water purification equipment.

 

Salient Features : The water enters these housings from bottom, thus do not strike directly on the cartridges. At rated flow rates these housings therefore offer minimum pressure drop. The bottom of Polyfilt filter is designed as integral with the top having the locator and closure system. This unique design avoids internal bypass. It is very easy to install the cartridges by pushing it down and then just closing the lid. This is accomplished in a matter of seconds. Cartridge Filter

 

Technical Specification :

• Suitable Filter Cartridges - 2.5
• Diameter Cartridges 10 to 40cartridge length Double Open End Cartridges Single Open End Cartridges Flow Capacity - Up to 36 m³/hr with a single Housing Material Of Construction - Unplasticized Polyvinyl Chloride (uPVC) with Stainless Steel Locking Mechanism Cartridge Per Housing - 5 cartridges / housings & 9 cartridges / Housings Connection Type - 2" Union , 3" Union Operating Condition - Max Forward Pressure - 6 kg/cm² 4o to 60o C Bag Filter
• Specification - Suitable Filter Bag - 7 Diameter Filter Bag Size 1 ( 7x16) , Size 2 ( 7x32 ) Flow Capacity - Up to 24 m³/hr with single Housing
• Material Of Construction - Unplasticized Polyvinyl Chloride (uPVC) with Stainless Steel Locking Mechanism Cartridge
• Per Housing - Single Bag per Housing Connection Type: 2" Flange
• Operating Condition  Max Forward
• Pressure  -6 kg/cm² 4o to 60^oC

We are offering atlas filtri filter housing 3p pp for cartridges sx. 3p pp is a range of single and duplex housings applicable for the filtration of water with non-neutral ph and for other liquids with suitable cartridges with standard sx flat seals (doe): fa wound polypropylene cartridges, cpp polypropylene melt-blown cartridges and ac multilayer cartridges. Height at 5", 7", 10", 20". The housings are made in 2 main versions:- 3p pp housings with standard epdm o-ring, for standard application in water filtration. - 3p pp v housings viton o-ring, for application with non-neutral water. With inout configurations at 12", 34" and 1", with bsp plastic threads pp 3p housings are suitable to a wide range of application for water filtration. Pp 3p housings and are manufactured with the finest and most advanced materials under constant focus on innovative processing technologies and ceaseless modernization to ensure the absolute quality of our products. A set of accessories is available on demand to complete the housings kit: wall bracket, opening spanner.

We are offering atlas filtri filter housing dp plus for cartridges sx and bx. Dp plus is a range of housings for cartridge height at 10'' designed to withstand the most severe testing methods (nsfansi) for pressure and stress resistance. The housings fit to both standard sx (doe) cartridges and to bx cartridges with 45 mm double o-ring collar. Exclusive mono, duo and trio patented and registered models are manufactured with the finest and most advanced materials under constant focus on innovative processing technologies and ceaseless modernization to ensure the absolute quality of our products. Dp housings are certified under the most stringent certification procedures and standards: dm 25 (italy), acs (france), gost (russia), nsfansi (usa). With inout configurations from 14'' to 1'', with bsp or npt plastic threads, dp housings are suitable for every point-of-use (pou) and point-of-entry (poe) application, as single- or multi-stage on-line filters, under-sink filters, reverse osmosis pre-filtration units. A wide range of combination with clear and opaque bowls and colored heads makes it possible to respond to every custom requirement upon minimum quantity. Every housing is provided with filterfit plus, the centering device which holds cartridges perfectly standing into the housing. A full set of accessories is available on demand to complete the housings kit: wall brackets for mono, duo and trio models, opening spanner, standing bases and brass or plastic nipples with o-ring.

Our company is capable of delivering consignments on time owing to an efficient trading network we have. We stock our product for wholesale distribution and supply as we have state-of-the-art storage facility along with the most advanced inventory management system and upgraded machines.

 

Product Description :

• Brand new range of housings designed to fit to ½BIG½ filter cartridges with outer diameter (OD) from 4½ to 4.50½, inner diameter (ID) 1.10½, height at 10½ and 20½ with standard SX (DOE) configuration. With female IN/Out connections at 1½ and 1½1/2, with BSP or NPT plastic threads DP BIG housings are suitable for every domestic Point-of-Entry (POE) or every industrial application when heavy-duty performance is a must. Besides the standard models

 

DP BIG are also available with features new to the market :

• M models with 2 manometers
• S models with discharge valve and self-cleaning performance. S models can be used with Kit Auto for automatic flushing and self-cleaning.
• SM models with discharge-valve and 2 manometers.
• DP Big housings are manufactured with the finest and most advanced materials under constant focus on innovative processing technologies and ceaseless modernization to ensure the absolute quality of our products.
• DP Big housings are certified under the most stringent certification procedures and standards
• All models are available with clear and opaque blue bowls. Custom combinations of colors are available upon minimum quantity. A full set of accessories is available on demand to complete the housings kit - metal wall bracket, opening spanner and brass nipples with o-ring.

Working Conditions :

• DP Big (10½) max working pressure - 8 bar (116 psi)
• DP Big G 20 max working pressure - 7 bar (101 psi)
• Max working temperature - 45^oC (113^oF)
• Min working temperature - 4^oC (39.2^oF)

Specifications :

• Non-toxic materials, suitable for drinking water.
• Head: reinforced polypropylene.
• Clear bowl - SAN.
• Blue bowl - reinforced polypropylene.
• O-ring - EPDM.
• Breather-valve - body polypropylene, o-ring EPDM.
• Manometers - radial type, pressure range 0-12 bar, 0-170 psi.
• Discharge ball-valve - CW 617 N brass nickel plated.

Gps plastofilt molded polypropylene filter housings are made of polypropylene san (transparent) with innovative features like lower pressure drop at higher flow rate, larger connections, air venting provision, robust knife-edge, molded structure, zero bypass and leak proof sealing. Gps plastofilt filter housings offer excellent chemical resistance characteristics. Smaller size and overall dimensions make them ideal for mounting in series. Gps plastofilt are sealed with top seated buna-nsiliconviton* 'o' ring by positive tangential contact that eliminates accidental misplacement. Caps are manufactured of reinforced polypropylene and are available in , 3 , , , 1 and 1.5 bsp connections 8 to match various flow rating and piping configurations. Caps are available with a pressure release mechanism to release the housing pressure when changing a cartridge. Pressure relief mechanism is constructed of stainless steel spring and screw and black polypropylene button. All caps come with four mounting brackets for easy installation. All housings have been tested and passed the hydrostatic leak and burst pressure to ensure consistence safe performance. *viton is a registered trademark of dupont.

We offer stainless steel filter housings.Gps indusfilt metallic filter housings are made out from ss304 ss316 ss316l cs ms material with innovative features like lower pressure drop at higher flow rate, larger connections, air venting provision, robust knife-edge, zero bypass and leak proof sealing. Indusfilt metallic filter housings are sealed with top seated buna-nsiliconviton* 'o' ring by positive tangential contact that eliminates accidental misplacement. Vessels have various connection sizes and types to match various flow rating and piping configurations. All housings have been tested and passed the hydrostatic leak and burst pressure to ensure consistence safe performance. *viton is a registered trademark of dupont.

With us, clients can stay rest assured for the security of the payment. For the convenience of the clients, we accept cash payments along with bank transfers. Each consignment of ours is packaged carefully utilizing premium packaging supplies and technologies in order to maintain the products' environment and quality during shipping and handling.

We offer gps frp filter housings.Gopani product systems, a supplier of highly specialized filtration vessels and filter cartridges, has been meeting global demand for filtration solutions for over 18 years. We make free standing, horizontal and custom design frp filtration vessels. Our fiberglass reinforced polymer (frp) vessels provide exceptional chemical resistance and tensile strength. In most applications, they outperform and outlast stainless steel vessels by three to five times. They come with innovative features like lower pressure drop at higher flow rate, larger connections, air venting provision, robust knife-edge, zero bypass and leak proof sealing. They are sealed with top seated buna-nsiliconviton* 'o' ring by positive tangential contact that eliminates accidental misplacement. Vessels have various connection sizes and types to match various flow rating and piping configurations. All housings have been tested and passed the hydrostatic leak and burst pressure to ensure consistence safe performance. *viton is a registered trademark of dupont. We offer you customized equipment design, provides you with complete turnkey systems for all of your operational needs, from industrial (chemical processing, food products, consumer products and general manufacturing among a few) to wastewater, municipal and desalination applications.

Gps slim transparent filter housings are made of san material with innovative features like lower pressure drop at higher flow rate, larger connections, air venting provision, robust knife-edge, molded structure, zero bypass and leak proof sealing. Smaller size and overall dimensions make them ideal for mounting in series. They are sealed with top seated buna-nsiliconviton* o ring by positive tangential contact that eliminates accidental misplacement. Housings are stress relieved for added clarity and strength. Transparent housings offer on-site examination of flow, cartridge performance and life. Caps are manufactured of reinforced polypropylene and are available with and bsp (f) connections to match various flow rating and piping configurations. Caps are available with a pressure release mechanism to release the housing pressure when changing a cartridge. Pressure relief mechanism is constructed of stainless steel spring and screw and black polypropylene button. All caps come with four mounting brackets for easy installation. All housings have been tested and passed the hydrostatic leak and burst pressure to ensure consistence safe performance. *viton is a registered trademark of dupont.