Post Buy Requirement
GSP Chemical Industries
Palghar, Maharashtra, India
Verified Add Review

Our Products

  1. Azo Dyes 3 Products available
  2. Ores And Minerals 6 Products available
  3. Pigments 4 Products available
  4. Acid Dyes 4 Products available
  5. Inorganic And Organic Solvents 5 Products available
  6. Natural Dyes 8 Products available
  7. Chemical Compound 6 Products available
  8. Laboratory Chemicals 3 Products available
  9. Catalysts And Absorbents 8 Products available
  10. Industrial Chemicals 14 Products available
  11. Others 32 Products available

Other Products / Services

Azure II Eosinate

  • C.A.S. No. 53092-85-6
  • Solubility 0.1% (MeOH) Clear solution
  • Absorption maximum (MeOH) ?1max 647-652nm
  • Absorption maximum (MeOH) ?2 max 520-525nm
  • Absorptivity (A1%/1cm in MeOH,at ?1max on dried substance) >1250
  • Absorptivity (A1%/1cm in MeOH,at ?2max on dried substance) 400
  • Loss On Drying (110°C) <10%
View Complete Details

Titan Yellow 65%

  • C.A.S. No. 1829-00-1
  • CI NO. 19540
  • M.F. C28H19Na2O6S4N5
  • M.W. 695.73gm/mole
  • Dye Content (by Spectrophotometry) >65%
  • Solubility 0.1% (Dist. water) Clear solution
  • Transition Range Ph 12.0-13.0 Yellow-red
  • Absorption maximum (Dist. water) ?max 398-405nm
  • Absorptivity (A1%/1cm in water, at ?max on dried substance) >525
  • Loss on drying (110°C) <8%
View Complete Details

Trypan Blue

  • Application Clinical, Hospital
  • C.A.S. No. 72-57-1
  • CI NO. 23850
  • M.F. C34H24N6S4O14Na4
  • M.W. 960.82gm/mole
  • Dye Content (by Spectrophotometry) >60%
  • Solubility 0.1% (Dist. water) Clear solution
  • Absorption maximum (MeOH) ?max 603-607nm
  • Absorptivity (A1%/1cm in MeOH, at ? max) >625
  • Loss on drying (110°C) <10%

Chemical Name

tetrasodium 3, 3'-[3, 3'-dimethyl(1, 1'-biphenyl)-4, 4'-diyl]bis(azo)bis(5-amino-4-hydroxynaphthalene-2, 7-disulphonate)

 

InChI Key

DELHWSZXMIOOES-KYRSKEKDSA-J

 

Solubility

Soluble in water. Partially Soluble in alcohol.

 

Trypan blue is a diazo dye used in ophthalmic cataract surgery to stain the anterior capsule in the presence of a mature cataract, to aid in visualization, before creating the continuous curvilinear capsulorhexis. Trypan Blue is an acid azo dye commonly used as a stain to distinguish viable from non-viable cells. It turns dead cells blue and viable cells unstained. It is a known animal carcinogen and an experimental teratogen. A dye obtained from tolidine that is absorbed by the macrophages of the reticuloendothelial system and is therefore used for staining cells in biological research. Trypan blue is an antiprotozoal drug first used to treat Babesia infection in 1909 and still commonly used to treat Babesia canis. The complex chemical structure has been progressively simplified, yielding such other widely used drugs as imidocarb.

 

Applications:

Trypan Blue is a water-soluble dye used for the dye exclusion test for cell viability to distinguish between viable and nonviable cells by seeping into nonviable cells with damaged plasma membranes causing them to appear blue.Trypan blue is a dye used to distinguish between live and dead cells. It is a vital stain that is not absorbed by healthy viable cells, but stains cells with a damaged cell membrane. This way, only dead cells can be counted. The method is sometimes referred to as the dye exclusion method.Trypan Blue Solution, is routinely used as a cell stain to assess cell viability using the dye exclusion test. This test is often performed while counting cells with the hemocytometer during routine subculturing, but can be performed any time cell viability needs to be determined quickly and accurately. The dye exclusion test is based upon the concept that viable cells do not take up impermeable dyes (like Trypan Blue), but dead cells are permeable and take up the dye.Trypan Blue is recommended for counting viable mammalian cells. Viable cell counts should be performed where a decrease in cell viability may be expected, for example, when working with cryopreserved cells or cells manipulated ex vivo.

View Complete Details

Phenolphthalein Complexone

  • Appearance Off white powder
  • Solubility Clear solution
  • C.A.S. No. 25296-54-2
  • M.W. 608.56gm/mole
  • Absorption Maximum(in 0.1N NaOH) ?max 556-560nm
  • Absorptivity (A1%/1cm, in 0.1N NaOH at ?max) >300
  • Loss on drying (110°C) <5%
View Complete Details

Pyrogallol Red

  • C.A.S. No. 32638-88-3
  • M.F. C19H14O9S
  • M.W. 418.39gm/mole
  • Solubility 0.1% (0.1n Naoh) Clear Solution
  • Absorption maximum (in acidic MeOH) ?max 474-478nm
  • Absorptivity 1%, 1cm (in acidic MeOH) at ?max >450
  • Loss on drying (110°C) <5%
View Complete Details

Bromopyrogallol Red

  • C.A.S. No. 16574-43-9
  • M.F. C19H10Br2O8S
  • M.W. 558.17gm/mole
  • Solubility 0.1% (in 95% EtOH) Clear solution
  • Absorption Maximum (in 95% EtOH) ?max 554-557nm
  • Absorptivity (A1%/1cm at pH 6.5 at ?max) >750
  • Loss On Drying (110°C) <5%
View Complete Details

4 5-Dibromofluorescein

  • C.A.S. No. 596-03-2
  • M.F. C20H10 Br 2O5
  • M.W. 332.31gm/mole
  • Dye Content (by Spectrophotometry) >90%
  • Solubility 0.1 % (meoh+1ml 1n Hcl ) Clear Solution
  • Absorption Maximum(MeOH+1ml 1N HCl) ?max 445-450nm
  • Absorptivity (A1% 1cm in Methanol+1ml 1N HCl at ?max) >300
  • Loss On Drying (110°C) <3%
View Complete Details

Eosin Spirit Soluble

  • C.A.S. No. 6359-05-03
  • CI NO. 45386
  • M.W. 714.03 gm/mole
  • Dye content (Spectrophotometry) > 94%
  • Appearance Dark Red to Brown
  • Solubility 0.1% (95% EtOH) Clear to Slightly Hazy
  • Absorption Maximum (50% ethanol with 1ml 1% Na2CO3) 529 - 535 nm
  • Absorptivity (a1%,1cm,In 50% Ethanol with 1ml 1% Na2co3 > 1260
  • Loss on drying at 110°C (1hr.) (< 5%)
View Complete Details

P-Xylenol Blue

  • C.A.S. No. 125-31-5
  • M.F. C23H22O5S
  • M.W. 410.49gm/mole
  • Dye Content (by Spectrophotometry) >90%
  • Solubility 0.1 % (MeOH) Clear solution
  • Transition range pH 8.0-9.6 Yellow-Blue
  • Absorption maximum (in MeOH) ?max 424+/-5nm
  • Absorptivity (A1%/1cm, in MeOH) >200
  • Loss on drying (110°C) <3%

Chemical Name

4, 4'-(3H-2, 1-Benzoxathiol-3-ylidene)bis(2, 5-dimethylphenol) S, S-dioxide

 

InChI Key

MGUKYHHAGPFJMC-UHFFFAOYSA-N

 

Solubility

Soluble in acetone, alcohol, and dilute aqueous alkali. Sparingly soluble in water.

 

Xylenol Blue is a dark brown powder and it belongs to the class of sulfonephthalein dyes. Xylenol Blue changes color from red (pH 1.2) to yellow (2.8) and yellow (8.0) to blue (9.6). It is widely used in food storage, drugs, determining bacterial growth, microbial assays and determining lipase.

 

Applications:

Xylenol Blue is a useful alternative to thymol blue developed in the 1920s. Xylenol Blue can be used at half the concentration that thymol blue requires. It is functional at the same two pH ranges, acidic (pH 1-3), which transitions from red to yellow, and basic (pH 8-10), which transitions from yellow to blue. Used in electrochromic displays, chemical sensors, fiber-optic pH sensors, optical quality films, ink, corrosion testing, lubricants, TTI indicators, food storage, cosmetics, bacterial growth, microbiological assays, determining lipase, drugs.

View Complete Details

Cresol Red ACS Grade

  • C.A.S. No. 1733-12-6
  • M.F. C21H18O5S
  • M.W. 382.43gm/mole
  • Dye Content (by Spectrophotometry) >95%
  • Transition Range pH 6.5-8.8 Yellow-Purple
  • Solubility 0.1% (95% EtOH) Clear solution
  • Absorption maximum (pH 6.5) ?1max 432-436nm
  • Absorption maximum (pH 8.8) ?2max 571-574nm
  • Absorptivity (A1%/1cm at pH 6.5 at ?1max) 490-540
  • Absorptivity (A1%/1cm at pH 8.8 at ?2max) 1000-1100
  • Loss On Drying (110°C) < 3%
View Complete Details

Methylthymol Blue Complexone

  • C.A.S. No. 1945-77-3
  • M.F. C37H40N2Na4O13S
  • M.W. 844.76gm/mole
  • Solubility 0.1 % (Dist. water) Clear solution
  • Absorption maximum (Dist. water) ?max 437-443nm
  • Absorptivity maximum (A1%/1cm, in water, at ?max) >120
  • Loss On Drying (110°C) <10%
  • Suitability as indicator for Metal Titration Passes test

Chemical Name

3, 3-Bis(N, N-Di(Carboxymethyl)Aminomethyl)Thymolsulfonephthalein, Sodium Salt

 

InChI Key

KIHCHVIVBXSLBU-UHFFFAOYSA-N

 

Solubility

Water soluble (10 g/l, H2O, 25 °C). Soluble in Methanol

 

Methylthymol blue is a Water soluble chelometric indicator.Methylthymol blue (MTB) is a metal- lochromic indicator which forms metal complexes different in spectral absorption characteristics from the free indicator. The barium complex is formed at relatively high pH with maximum absorption at 608 nm; free MTB at the same pH has a maximum absorption at 460nm.

 

Applications:

Methylthymol Blue sodium salt is used as thymol-containing organic dye for complexometric titration for Strontium. Methylthymol Blue sodium salt is mainly used for determining the calcium content in biological samples. It is used in determination of sulfate in rainwater. It combines with silica gel and aids in the separation and preconcentration of trace amounts of heavy metals from some salts. It is used in automated method applicable for qualitative analysis of presence of alkali metals to groundwater, drinking and surface waters, and domestic and industrial wastes.

View Complete Details

Alizarin Red S

  • C.A.S. No. 130-22-3
  • CI NO. 58005
  • M.F. C14H7NaO7S
  • M.W. 342.26gm/mole
  • Dye Content (by Spectrophotometry) >70%
  • Transition Range pH 4.3-6.3 Yellow-Pink
  • Solubility 0.1% (Dist. Water) Clear solution
  • Absorption Max (0.1N NaOH) ?1max 553-559nm
  • Absorption Max (0.1N NaOH) ?2max 592-599nm
  • Absorptivity (A1%/1cm at 556 ?1max) >350
  • Absorptivity (A1%/1cm at 595 ?2max) >325
  • Loss On Drying (110°C) <5%
  • Suitability for microscopy Passes test
View Complete Details

Nile Red

  • C.A.S. No. 7385-67-3
  • M.F. C20H18N2O2
  • M.W. 318.38gm
  • Solubility 0.1% (MeOH) Clear solution
  • Absorption maximum (MeOH) ?max 551-554nm
  • Absorptivity (A1%/1cm in MeOH, at ?max) >1400
  • Loss On Drying (110°C) <1%
View Complete Details

Methyl Orange ACS Grade

  • C.A.S. No. 547-58-0
  • CI NO. 13025
  • M.F. C14H14N3SO3Na
  • M.W. 327.34gm/mole
  • Dye Content (by Spectrophotometry) >95%
  • Solubility 0.1 % (Dist. water) Clear solution
  • Transition Range Ph 3.1-4.4 Pink Orange-Yellow
  • Absorption maximum (pH 3.1) ?1max 501-504nm
  • Absorption maximum (pH 4.4) ?2max 467-471nm
  • Absorptivity (A1%/1cm at pH 3.1 at ?1max) 1050-1150
  • Absorptivity (A1%/1cm at pH 4.4 at ?2max) 750-850
  • Loss On Drying (110°C) <3%

Chemical Name

p-((p-(Dimethylamino)phenyl)azo)benzenesulfonic acid sodium salt

 

InChI Key

STZCRXQWRGQSJD-UHFFFAOYSA-M

 

Solubility

In water= 200 mg/l at 25 deg C. 20 mg/ml in 2-methoxyethanol; 0.3 mg/ml in ethanol

 

Methyl orange does not have a full spectrum of color change, but has a sharper end point. Methyl orange shows red color in acidic medium (pH < 3.1) and yellow color in basic medium (pH > 4.4)

 

Applications:

Methyl orange is also used in dyeing and printing textiles as a dyestuff. Also used as an indicator of acid-base titration, and the alkalinity of the water. Also for textile dyeing. Methyl orange is a pH indicator frequently used in titrations. Because it changes colour at the pH of a mid-strength acid, it is usually used in titrations for acids. Indicators are weak acids or bases which change color depending on the pH of the solution. Because they have such vivid color changes, only small amounts of indicators must be added to a solution which also limits any side effects they might have on the reaction being observed. Methyl orange is a pH indicator frequently used in titrations. Methyl orange is also used for histological microscopy.At pH values less than 3.1, methyl orange is red and a pH values greater than 4.4, it will be yellow. In the range between 3.1 and 4.4, you will see a mixture of the red and yellow colors such that in the middle of this range, the solution will appear to be orange. Since acidic solutions have low pH values, it will be red and transition to orange and yellow as the acidity of the solution decreases. In basic solutions, it will be yellow as well as in neutral solutions because the pH of a neutral solution is approximately 7 and falls after the color change of methyl orange.

View Complete Details

Ethyl Orange

  • C.A.S. No. 62758-12-7
  • M.F. C16H18N3SO3Na
  • M.W. 355.39gm/mole
  • Solubility 0.1 % (Dist. Water) Clear solution
  • Transition Range pH 3.0-4.8
  • Absorption maximum (Dist. Water) ?max 472-477nm
  • Absorptivity (A1% 1cm in Dist. water, at ?max) >850
  • Loss On Drying (110°C) <5%
View Complete Details

Calcon Carboxylic Acid Patton And Reeders Reagent

  • C.A.S. No. 3737-95-9
  • M.F. C21H14N2O7S
  • M.W. 438.41gm/mole
  • Dye Content (by Spectrophotometry) >60%
  • Solubility 0.1% (MeOH) Clear solution
  • Absorption maximum (Methanol+1ml 1N HCl) ?max 550-560nm
  • Absorptivity (A1%1cm in Methanol+ 1ml 1N HCL, at ?max) >250
  • Loss On Drying (110°C) <7%
  • Suitability as indicator for Metal Titration Passes test
View Complete Details

Crocein Orange G

  • C.A.S. No. 1934-20-9
  • CI NO. 15970
  • M.F. C16H11N2SO4Na
  • M.W. 350.33gm/mole
  • Dye Content (by Spectrophotometry) >70%
  • Solubility in 0.1% (in Dist. Water) Clear solution
  • Absorption maximum (in Dist. water) 482-486nm
  • Absorptivity 1%/1cm at ?max >460
  • Loss On Drying (110°C) <5%
View Complete Details

Calcon Solochrome Dark Blue

  • C.A.S. No. 2538-85-4
  • CI NO. 15705
  • M.F. C20H13N2NaO5S
  • M.W. 416.39gm/mole
  • Solubility 0.1% (50% EtOH) Clear solution
  • Suitability as indicator for Metal Titration Passes test
  • Absorption maximum (Ammonia buffer pH 12.2+2ml EDTA solution) ?max 632-636nm
  • Absorptivity (A1%,1cm pH 12.2, at ?max on dried substance) >300
  • Loss On Drying (110°C) <10%
View Complete Details

Calmagite

  • C.A.S. No. 3147-14-6
  • M.F. C17H14N2O5S
  • M.W. 358.37gm/mole
  • Solubility 0.1% (Dist. Water) Clear solution
  • Absorption maximum (pH 10.0 in Ammonia buffer+2ml of 0.05M E.D.T.A. Solution) ?max 600-610nm
  • Absorptivity (A1% 1cm at ?max, at pH 10.0 in Ammonia buffer +2ml of 0.05M E.D.T.A. solution on dried >300
  • Loss On Drying (110°C) <10%
View Complete Details

Neutral Red 60%

  • C.A.S. No. 553-24-2
  • CI NO. 50040
  • M.F. C15H17 N4Cl
  • M.W. 288.78gm/mole
  • Dye Content (by Spectrophotometry) >60%
  • Transition Range Ph 6.8-8.0 Violet Red- Yellow
  • Solubility 0.1% (50% EtOH) Clear solution
  • Absorption Maximum (50%EtOH+2ml Acetic Acid) ?max 539-544nm
  • Absorptivity (A1%,1cm in 50% EtOH+2ml Acetic Acid, at ?max) >920
  • Loss On Drying (110°C) <8%
  • Suitability for microscopy Passes test

Chemical Name

Phenazine, 3-amino-7-(dimethylamino)-2-methyl-, hydrochloride

 

InChI Key

PGSADBUBUOPOJS-UHFFFAOYSA-N

 

Solubility

Soluble in water (50 mg/ml at 25° C), abs. alcohol (1.8%), and cellosolve (3.75%).

 

Neutral red (toluylene red, Basic Red 5, or C.I. 50040) is a eurhodin dye used for staining in histology. It stains lysosomes red. It is used as a general stain in histology, as a counterstain in combination with other dyes, and for many staining methods. Neutral Red is a weak cationic azine dye that is used extensively as a nuclear stain in a variety of biological stain applications. It is a pH indicator as well, changing color from red to yellow over the pH range 6.8-8.0. It is also incorporated into bacteriological growth media.

 

Applications:

The high-purity neutral red is a common lysosomal probe that stains lysosomes a fluorescent red.A hydrochloride obtained by combining the free base of neutral red with one equivalent of hydrochloric acid. Neutral red acts as a pH indicator, changing from red to yellow between pH 6.8 and 8.0.It is used to stain embryonal tissues and supravital staining of blood. Can be used for staining Golgi apparatus in cells and Nissl granules in neurons. In microbiology, it is used in the MacConkey agar to differentiate bacteria for lactose fermentation. Neutral red can be used as a vital stain. Live cells incorporate neutral red into their lysosomes. As cells begin to die, their ability to incorporate neutral red diminishes. Thus, loss of neutral red uptake corresponds to loss of cell viability. It is also used to stain cell cultures for plate titration of viruses. Neutral red is added to some growth media for bacterial and cell cultures. It usually is available as a chloride salt.

View Complete Details

Neutral Red 95%

  • C.A.S. No. 553-24-2
  • CI NO. 50040
  • M.F. C15H17 N4Cl
  • M.W. 288.78gm/mole
  • Dye Content (by Spectrophotometry) >95%
  • Transition Ph 6.8-8.0 Violet Red- Yellow
  • Solubility 0.1% (50% EtOH) Clear Solution
  • Absorption Maximum (50%EtOH+2ml Acetic Acid) ?max 539-544nm
  • Absorptivity (A1%,1cm in 50% EtOH+2ml Acetic Acid, at ?max) >1440
  • Loss On Drying (110°C) <8%
  • Suitability for microscopy Passes test

Chemical Name

Phenazine, 3-amino-7-(dimethylamino)-2-methyl-, hydrochloride

 

InChI Key

PGSADBUBUOPOJS-UHFFFAOYSA-N

 

Solubility

Soluble in water (50 mg/ml at 25° C), abs. alcohol (1.8%), and cellosolve (3.75%).

 

Neutral red (toluylene red, Basic Red 5, or C.I. 50040) is a eurhodin dye used for staining in histology. It stains lysosomes red. It is used as a general stain in histology, as a counterstain in combination with other dyes, and for many staining methods. Neutral Red is a weak cationic azine dye that is used extensively as a nuclear stain in a variety of biological stain applications. It is a pH indicator as well, changing color from red to yellow over the pH range 6.8-8.0. It is also incorporated into bacteriological growth media.

 

Applications:

The high-purity neutral red is a common lysosomal probe that stains lysosomes a fluorescent red.A hydrochloride obtained by combining the free base of neutral red with one equivalent of hydrochloric acid. Neutral red acts as a pH indicator, changing from red to yellow between pH 6.8 and 8.0.It is used to stain embryonal tissues and supravital staining of blood. Can be used for staining Golgi apparatus in cells and Nissl granules in neurons. In microbiology, it is used in the MacConkey agar to differentiate bacteria for lactose fermentation. Neutral red can be used as a vital stain. Live cells incorporate neutral red into their lysosomes. As cells begin to die, their ability to incorporate neutral red diminishes. Thus, loss of neutral red uptake corresponds to loss of cell viability. It is also used to stain cell cultures for plate titration of viruses. Neutral red is added to some growth media for bacterial and cell cultures. It usually is available as a chloride salt.

View Complete Details

Orcein

  • C.A.S. No. 1400-62-0
  • Solubility 0.1 %(0.1N NaOH) Clear solution
  • Absorption Maximum (0.1N NaOH) ?max 574-580nm
  • Absorptivity (A1%/1cm in 0.1N NaOH, at ?max) 250-450
  • Loss on drying (110°C) <7%
  • InChI Key VPEASJIRGSVXBF-UHFFFAOYSA-N
  • Chemical Name 2, 8-bis(2, 4-dihydroxy-6-methyl-anilino)-1, 9-dimethyl-dibenzofuran-3, 7-dione

Solubility

Soluble in acetone, alcohol, acetic acid (red color), and dillute aqueous alkali (blue-violet color). Insoluble in water.

 

Once used as a food colouring but now banned throughout the EC Cudbear is a dye extracted from orchil lichens that produces colours in the purple range. It can be used to dye wool and silk, without the use of mordant. Cudbear was the first dye to be invented in modern times, and one of the few dyes to be credited to a named individual. Orcinol is extracted from archil lichen, Rocella tinctoria. It is then converted to orcein by ammonia and air. Orcein is a reddish-brown dye, orchil is a purple-blue dye. aminoorceinimines.

 

Applications:

Orcein (Synthetic) is a red dye used in microscopy as a mordant for the staining of flagella, as well as for detecting elastic tissue in sputum.Orcein was originally obtained from lichens, but is now made from orcinol by hydrogen peroxide oxidation with ammonia present. It is a standard dye to use for the demonstration of elastic fibres, when it is applied in an acid, alcoholic solution. This same solution has also been shown to stain the rough endoplasmic reticulum of hepatitis B infected liver cell. Orcein is also used as a stain in microscopy to visualize elastic fibers, Hepatitis B surface antigens and copper associated proteins. It is a mixture of phenoxazone derivates - hydroxyorceins, aminoorceins, and Aminoorceinimines.

View Complete Details

Tropaeolin O

  • C.A.S. No. 547-57-9
  • CI NO. 14270
  • M.F. C12H9N2SO5Na
  • M.W. 316.27gm/mole
  • Solubility 0.1% (Dist. water) Clear solution
  • Transition range pH 11.2-12.7 Yellow-Orange
  • Absorption maximum (0.1N NaOH) ?max 488-493nm
  • Absorptivity (A1%/1cm in 0.1N NaOH, at ?max) >550
  • Loss on drying (110°C) <5%
View Complete Details

Congo Red

  • C.A.S. No. 573-58-0
  • CI NO. 22120
  • M.F. C32H22N6Na2O6S2
  • M.W. 696.66gm/mole
  • Dye Content (by Spectrophotometry) >75%
  • Transition Range pH 3.0-5.2 Violet-Orange Red
  • Solubility 0.1% (Dist. Water) Clear solution
  • Absorption Maximum (Dist.Water) ?max 495-499nm
  • Absorptivity (A1%, 1cm in Water, at ?max) >520
  • Loss On Drying (110°C) <5%
  • Suitability for microscopy Passes test
View Complete Details

Bromocresol Green ACS Grade

  • C.A.S. No. 76-60-8
  • M.F. C21H14Br4O5S
  • M.W. 698.04gm/mole
  • Dye Content (by Spectrophotometry) >95%
  • Transition Range pH 3.8-5.4 Greenish Yellow-Blue
  • Solubility 0.1% (95% EtOH) Clear solution
  • Absorption maximum (pH 3.8) ?1max 438-443nm
  • Absorption maximum (pH 5.4) ?2max 615-618nm
  • Absorptivity (A1%/1cm at pH 3.8 at ?1max) 240-270
  • Absorptivity (A1%/1cm at pH 5.4 at ?2max) 530-570
  • Loss On Drying (110°C) <3%

Chemical Name

3, 3-Bis(3, 5- dibromo-4- hydroxy-2- methylphenyl)-

3H-benzo[c][1, 2]oxathiole 1, 1-dioxide

 

InChI Key

FRPHFZCDPYBUAU-UHFFFAOYSA- N

 

Bromocresol Green is a dye of the triphenylmethane family (triarylmethane dyes). It binds quantitatively with human albumin forming an intense blue-green complex with an absorbance maximum at 628 nm.

 

Format Powder

pH 3.8 - 5.4, yellow to blue(Lit.)

 

Solubility

Soluble in water (6 mg/mL), ethanol (40 mg/mL) or methyl cellosolve (200 mg/mL).

 

Storage and Handling: Store at Room Temperature(15- 30 °C).

 

Density : 2.1 g/cm 3 (Predicted)

 

pK a : 4.24 (Predicted)

 

Applications

Bromocresol Green is useful in a variety of colorimetric detection technologies. It is used as a tracking dye for DNA agarose gel electrophoresis, in protein determinations and in charge transfer complexation processes. In TLC, it is used for visualisation of the compounds with functional groups whose pKa is below 5.0. Bromocresol green is a pH indicator and reagent. It has been used in serum albumin determinations and as a pH indicator.It is a pH sensitive triphenylmethane dye useful in various colorimetric detection studies and as an activity tracking dye for DNA agarose gel electrophoresis. It is also used in TLC (thin-layer chromatography) for visualizing compounds containing functional groups having pKa less than 5.

View Complete Details

Bromophenol Blue ACS Grade

  • C.A.S. No. 115-39-9
  • M.F. C19H10Br4O5S
  • M.W. 669.99gm/mole
  • Dye Content (by Spectrophotometry) >95%
  • Transition Range pH 3.0-4.6 Greenish Yellow-Blue
  • Solubility 0.1% (95% EtOH) Clear solution
  • Absorption maximum (pH 3.0) ?1max 434-439nm
  • Absorption maximum (pH 4.6) ?2max 590-593nm
  • Absorptivity (A1%/1cm at pH 3.0 at ?1max) 350-385
  • Absorptivity (A1%/1cm at pH 4.6 at ?2max) 940-1000
  • Loss On Drying (110°C) <1%

Chemical Name

Phenol, 4, 4'-(3H-2, 1-benzoxathiol-3-ylidene)bis[2, 6-dibromo-, S, S-dioxide

 

InChI Key

UDSAIICHUKSCKT-UHFFFAOYSA-N

 

Solubility

Soluble in acetic acid.Soluble in water (about 0.4 g/100 mL); more soluble in methyl and ethyl alcohol, and in benzene. Freely soluble in NaOH solutions with the formation of a water-soluble sodium salt.In water, 3 mg/mL

 

Bromophenol blue is an acid-base indicator since its useful range lies between pH 3.0 and 4.6. It changes from yellow at pH 3.0 to blue at pH 4.6; this reaction is reversible. Bromophenol blue is structurally related to phenolphthalein (a popular indicator). Bromophenol blue is also used as a color marker to monitor the process of agarose gel electrophoresis and polyacrylamide gel electrophoresis

 

Applications:

Chemicals and substances that impart color including soluble dyes and insoluble pigments. They are used in INKS; PAINTS; and as INDICATORS AND REAGENTS.Concentrations of bromophenol blue (I) in plasma, urine, and bile were determined spectrophotometrically after intravenous bolus injections and infusions in rats. The plasma concentrations were found to decrease mono exponentially after all doses except the highest, where the decrease was biexponential. Bromophenol blue (BPB) is the most widely used stain in gel electrophoresis for tracing the migration of samples on electrophoretic gels. If the gel is staind with 1 - 5 mg bromophenol blue, this may be detected much easier and earlier. In case that the stain will interfere with other applications (e. g. silver staining), a pre-run of the gel will remove bromophenol blue. It does not influence the migration of the samples. Add the solid stain before adding the catalyst.

View Complete Details

Pyrocatechol Violet

  • C.A.S. No. 115-41-3
  • M.F. C19H14O2S
  • M.W. 386.38gm/mole
  • Solubility 0.1% (MeOH) Clear solution
  • Absorption maximum(in MeOH) ?max 442-446nm
  • Absorptivity 1%, 1cm (in MeOH)at ?max >360
  • Loss on drying (110°C) <7%
View Complete Details

Bromocresol Purple ACS Grade

  • C.A.S. No. 115-40-2
  • M.F. C21H16Br2O5S
  • M.W. 540.24gm/mole
  • Dye Content (by Spectrophotometry) >95%
  • Transition Range pH 5.2-6.8 Yellow-Purple
  • Solubility 0.1% (95% EtOH) Clear solution
  • Absorption maximum (pH 5.2) ?1max 427-431nm
  • Absorption maximum (pH 6.8) ?2max 588-590nm
  • Absorptivity (A1%/1cm at pH 5.2 at ?1max) 400-500
  • Absorptivity (A1%/1cm at pH 6.8 at ?2max) 1000-1100
  • Loss On Drying (110°C) <1%

Chemical Name

3, 3-Bis(3-bromo-4-hydroxy-5-methylphenyl)-3H-benzo[c][1, 2]oxathiole 1, 1-dioxide

 

inChI Key

ABIUHPWEYMSGSR-UHFFFAOYSA-N

 

Bromocresol Purple is a water soluble dye used as an protein probe. It has been used in the spectrophotometric determination of serum-albumin. It is also a pH indicator with a transition interval from 5.2 - 6.8 (yellow to purple).

 

Solubility

Soluble in alcohol, dilute alkalies. In water, 7.3X10^-3 mg/L at 25 deg C (est)

 

Applications

Bromocresol purple (BCP) or 5', 5-dibromo-o-cresolsulfophthalein, is a pH indicator. In its sultone form, it has a pKa value of 6.3, and is usually prepared as a 0.04% aqueous solution. Besides its primary function as an indicator, bromocresol purple is used in medical laboratories to measure albumin. Used in spectrophotometric determination of serum-albumin.Bromocresol purple binds quantitatively with human serum albumin forming a stable complex with absorbance maximum at 600 nm. The intensity of the color produced is directly proportional to the albumin concentration in the sample.It is used for the confirmation tests for presence of fecal streptococci in water and wastewater.pH indicators and similar dyes which affinity allow to probe (detect, visualize and even measure) ) physiological parameter and biology structures, such as the intracellular pH, organelles or membrane lipids, the cytoskeleton, cytoplasmic Ca2+, caspases and enzymes

View Complete Details

O-Cresolphthalein

  • C.A.S. No. 596-27-0
  • M.F. C22H18O4
  • M.W. 346.38gm/mole
  • Dye Content (by Spectrophotometry) >95%
  • Appearance White-Off white powder
  • Solubility 0.1% (EtOH) Clear solution
  • Transition Range pH 8.2-9.8 Colorless-Red
  • Absorption maximum (0.1N NaOH) at ?max 564-568nm
  • Absorptivity (A1%1cm in 0.1N NaOH at ?max) >1670
  • Loss On Drying (110°C) <1%

Chemical Name

3, 3-Bis(4-hydroxy-3-methylphenyl)-2-benzofuran-1(3H)-one

 

InChI Key

CPBJMKMKNCRKQB-UHFFFAOYSA-N

 

Solubility

Solubility Slightly soluble in water; soluble in ethanol

Cresolphthalein is a pH indicator used in titrations. It is insoluble in water but soluble in ethanol.

 

Applications:

o-Cresolphthalein due to its sharp and contrasting color change has potential of being used in many consumer products related to sanitation and visual confirmation Hence, the derived applications are in sensors, display device, photoresists, recording materials, imaging materials, authentication system for secure documents, decoder system, lithium cells, electroplating process, inks, markers, toners, correction fluid, paints, adhesives, floor coatings, gas leaking detector for safety in industries, toys, food storage, diapers, determination of calcium, lotions, urine analysis test strips, drugs and blood analysis

View Complete Details

Chlorophenol Red

  • C.A.S. No. 4430-20-0
  • M.F. C19H12Cl2O5S
  • M.W. 423.32gm/mole
  • Dye Content (by Spectrophotometry) >93%
  • Solubility 0.1% (95% EtOH) Clear solution
  • Transition Range pH 4.8-7.0
  • Absorption maximum (0.1N NaOH) ?max 573-579nm
  • Absorptivity (A1%1cm ,in 0.1NaOH at ?max) >1550
  • Loss On Drying (110°C) <7%
View Complete Details

Phenol Red ACS Grade

  • C.A.S. No. 143-74-8
  • M.F. C19H14O5S
  • M.W. 354.38gm/mole
  • Dye Content (by Spectrophotometry) >95%
  • Solubility 0.1 % (95% EtOH) Clear solution
  • Transition Range Ph 6.5-8.2 Yellow-reddish Violet
  • Absorption Maximum (pH 6.5) ?1max 430-435nm
  • Absorption maximum (pH 8.2) ?2max 557-560nm
  • Absorptivity (A1%/1cm at pH 6.5 at ?1max) 600-700
  • Absorptivity (A1%/1cm at pH 8.2 at ?2max) 1100-1200
  • Loss on drying (110°C) <1%

Chemical Name

4-[3-(4-hydroxyphenyl)-1, 1-dioxo-2, 1$l^6-benzoxathiol-3-yl]phenol

 

InChI Key

BELBBZDIHDAJOR-UHFFFAOYSA-N

 

Phenol red is a water-soluble dye used as a pH indicator, changing from yellow to red over pH 6.6 to 8.0, and then turning a bright pink color above pH 8.1. As such, phenol red can be used as a pH indicator dye in various medical and cell biology tests.

 

Solubility

Practically insoluble in chloroform, ether. Soluble in aqueous alkali hydroxides or carbonates with red color (removed by boiling with zinc dust).

  • Solubility in water: approximately 1g/1300ml.
  • Solubility in alcohol: approximately 1g/350ml
  • Storage and Shelf Life : Store between 10- 30°C. Use before expiry date on the label.

 

Application

Chemicals and substances that impart color including soluble dyes and insoluble pigments. They are used in INKS; PAINTS; and as INDICATORS AND REAGENTS.Substances used for the detection, identification, analysis, etc. of chemical, biological, or pathologic processes or conditions. Indicators are substances that change in physical appearance, e.g., color, at or approaching the endpoint of a chemical titration, e.g., on the passage between acidity and alkalinity. Reagents are substances used for the detection or determination of another substance by chemical or microscopical means, especially analysis. Types of reagents are precipitants, solvents, oxidizers, reducers, fluxes, and colorimetric reagents.

View Complete Details

Thymol Blue ACS Grade

  • C.A.S. No. 477-73-6
  • CI NO. 50240
  • M.F. C20H19N4Cl
  • M.W. 350.85gm/mole
  • Dye content (Spectrophotometry) > 95%
  • Solubility 0.1 % (50%Ethanol) Clear solution
  • Absorption maximum (50% Ethanol) ?max 530-534nm
  • Absorptivity (A1%/1cm in 50% Ethanol, at ?max > 1500
  • Loss on drying (110°C) < 5%
  • Suitability for microscopy To passes test
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • . (GSP Chemical Industries)
  • ESJAY CHEMICALS N - 208 / 209, MIDC, Tarapur, Palghar, Maharashtra - 401506, India
  • https://www.phindicators.com
  • Share us via
  • Call 08069247353 Ext. 194