Inconel 625 is a nickel-based alloy used both for its high strength and outstanding aqueous corrosion resistance. The strength of alloy 625 is primarily a solid solution effect from molybdenum and columbium. Alloy 625 has excellent weld ability and is frequently used to weld AL-6XN alloy. Matching filler metals are also used to combine dissimilar metals. Alloy 625 has a face-centered cubic structure. After long exposures at a temperature of approximately 650°C (1200°F) the alloy precipitates some isolated carbides and a metastable tetragonal phase which later changes to a stable orthorhombic phase Ni3 (Nb, Ti). The mechanical properties are enhanced by the molybdenum and niobium content through solid-solution hardening of the nickel-chromium matrix. There is, however, a loss in ductility. Inconel 625 Bars are used in industries which require super alloys that don’t oxidize or corrode and maintain their integrity across a full range of extreme temperatures. Nickel base, reinforced with a columbium-tantalum alloy, molybdenum, niobium and chromium. Inconel 625’s combination of refractory metals and alloys exhibit uniform performance at temperatures ranging from cryogenic to over 1000 degrees Celsius/2000 degrees Fahrenheit. Performance characteristics include scaling and oxidation resistance, stabilization during welding, resistance to chloride stress and corrosion cracking and outstanding fatigue strength. Inconel 625 Bars are non-magnetic. This makes Inconel 625 a prime of the aerospace, hardware manufacturing, marine engineering, chemical processing and power generation industries. Inconel 625 (UNS N06625) corrosion resistance includes harsh and hostile environments such as salt water, fresh water, neutral salts, air and alkali.

Nickel 718 is an age hardenable alloy, which offers a combination of high strength up to 1300° F, corrosion resistance and good weld ability. It can achieve approximately 200, 000 psi tensile strength. This grade is hardenable by cold working and age hardening. It has high strength and corrosion resistant properties needed in the aggressive environments encountered in oil & natural gas production. This grade is hardenable by cold working and age hardening. Every type of metal that is used in industry has its own properties and is treated in varying ways to provide the appropriate amount of resilience needed for the processes in which it will be used. One of the types of metals often used in industry is the Inconel Alloy 718 Bar. This type of metal is a high-strength nickel alloy that can be specially ordered to stand up to extremely high temperatures, up to 1300 degrees Fahrenheit, while maintaining its ductility. Inconel Alloy 718 Bars is suitable for welding and other processes that require formability. Alloy 718 Nickel bar is a precipitation-hardening nickel-chromium alloy containing significant amounts of iron, columbium and molybdenum, along with lesser amounts of aluminum and titanium. Inconel Alloy 718 Bars maintain high strength and good ductility up to 1300°F (704°C). The Nickel Bar Alloy has relatively good weld ability, formability and excellent cryogenic properties compared to other precipitation hardening nickel alloys. The sluggish precipitation hardening response of this alloy allows it to be readily welded without hardening or cracking.

Monel Alloy K500 round bars UNS S05500 WR. NO 2.4375 contain Titanium 0.35-0.85%, Manganese 1.5% max, Nickel 63.0-70.0%, Silicon 0.50% max, Carbon 0.25% max, Aluminium 2.30-3.15% which is commonly used in various daily applications such as Sour-gas service applications, Oil and gas production safety lifts and valves, Oil-well tools and instruments like drill collars, Oil well industry, Doctor blades and scrapers, Chains, cables, springs, valve trim, fasteners for marine service, Pump shafts and impellers in marine service. Monel Alloy K500 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Monel Alloy K500 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Monel Alloy K500 round bars along in types of Monel Alloy K500 bright round bars, Monel Alloy K500 hexagonal bars, Monel Alloy K500 square bars, Monel Alloy K500 hex bars, Monel Alloy K500 flat bars, Monel Alloy K500 threaded bars and Monel Alloy K500 forged bars. All the Monel Alloy K500 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 6001-208 we export Monel Alloy K500 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.

Types of Monel Alloy K500 bars we stock:

• Monel Alloy K500 cold drawn & polished round, hex, square, threaded, forged bars
• Monel Alloy K500 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars
• Monel Alloy K500 peeled and turned round, hex, square, threaded, forged bars
• Monel Alloy K500 buffed round, hex, square, threaded, forged bars
• Monel Alloy K500 chamfered round, hex, square, threaded, forged bars
• Monel Alloy K500 solution annealed round, hex, square, threaded, forged bars
• Monel Alloy K500 forged round, hex, square, threaded forged bars with annealed and aged condition

Application of Monel Alloy K500 round bars:
Sour-gas service applications, Oil and gas production safety lifts and valves, Oil-well tools and instruments like drill collars, Oil well industry, Doctor blades and scrapers, Chains, cables, springs, valve trim, fasteners for marine service, Pump shafts and impellers in marine service.

Inconel Alloy 738/738LC round bars contain Chromium 15.70-16.30% Manganese 0.20% max, Silicon 0.30% max, Carbon 0.15-0.20%, Aluminium and titanium 6.50-7.20% which is commonly used in various daily applications such as Aerospace components, landing gear, nuclear reactor components, petrochemical industry, injection moulding equipment etc. Alloy 738/738LC in the annealed condition can be strengthened further by relatively low temperature heat treatment. Inconel Alloy 738/738LC bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Inconel Alloy 738/738LC round bars along in types of Inconel Alloy 738/738LC bright round bars, Inconel Alloy 738/738LC hexagonal bars, Inconel Alloy 738/738LC square bars, Inconel Alloy 738/738LC hex bars, Inconel Alloy 738/738LC flat bars, Inconel Alloy 738/738LC threaded bars and Inconel Alloy 738/738LC forged bars. All the Inconel Alloy 738/738LC bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Inconel Alloy 738/738LC rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.

Types of Inconel Alloy 738/738LC bars we stock:

• Inconel Alloy 738/738LC cold drawn & polished round, hex, square, threaded, forged bars
• Inconel Alloy 738/738LC cold drawn, centre less ground and polished round, hex, square, threaded, forged bars
• Inconel Alloy 738/738LC peeled and turned round, hex, square, threaded, forged bars
• Inconel Alloy 738/738LC buffed round, hex, square, threaded, forged bars
• Inconel Alloy 738/738LC chamfered round, hex, square, threaded, forged bars
• Inconel Alloy 738/738LC solution annealed round, hex, square, threaded, forged bars
• Inconel Alloy 738/738LC forged round, hex, square, threaded forged bars with annealed and aged condition

Application of Inconel Alloy 738/738LC round bars:
Aerospace components, landing gear, nuclear reactor components, petrochemical industry, injection moulding equipment etc.

At Harsh Steel Nickel Alloy X-750/UNS N07752 is available in Inconel X-750 wire, Inconel X-750 Round bar, Inconel X-750 Forged bar, Inconel X-750 hex bar, Inconel X-750 Flat bar, Inconel X-750 Circles, Inconel X-750 Ring, Inconel X-750 Tube, Inconel X-750 seamless Pipe, Inconel X-750 Welded / ERW Pipe, Inconel X-750 Sheet, Inconel X-750 Plate, Inconel X-750 Coil, Inconel X-750 Flanges, Inconel X-750 fasteners, Inconel X-750 Socket weld Fittings, Inconel X-750 ferrule fittings, Inconel X-750 Buttweld fittings Like cap, elbow, tee, Reducer.

Inconel X-750 is a nickel-chromium alloy which has been made precipitation-hardenable by the increments of aluminum and titanium. Inconel X-750 has great resistance to erosion and oxidation along high tensile and creep break properties at temperature up to 1300ºf (700ºc). Because of X-750's great unwinding safety it is helpful for applications as high-temperature springs and fasteners, X-750 is likewise utilized as a part of gas turbines, rocket engines, atomic reactors, weight vessels, tooling and airplane structure.

Sheet, Strip and Plate are available with the following heat treatments

• AMS 5542 - 1300°F/20hr, AC (Constant-temperature precipitation treatment). AMS 5542 has high strength up to 1300°F
• AMS 5598 - 1350°F/8hr, FC to 1150°F, hold at 1150°F for total precipitation-treating time of 18hr, AC (furnace-cool precipitation treatment. AMS 5598 has high strength up to 1300°F (Increased tensile properties to about 1100°F).
• With heat treatment 1400°F/1hr, FC to 1150°F hold at 1150°F for total time of 6hr, AC (short furnace-cool precipitation treatment).
• UNS N07752 is available in billet for forging. UNS N07752 has limits on the Carbon and Cobalt levels (each has a maximum of 0.05%).

Waspaloy is available in Waspaloy wire, Waspaloy Round bar, Waspaloy Forged bar, Waspaloy hex bar, Waspaloy Flat bar, Waspaloy Circles, Waspaloy Ring, Waspaloy Tube, Waspaloy seamless Pipe, Waspaloy Welded / ERW Pipe, Waspaloy Sheet, Waspaloy Plate, Waspaloy Coil, Waspaloy Flanges, Waspaloy fasteners, Waspaloy Socket weld Fittings, Waspaloy ferrule fittings, Waspaloy Buttweld fittings Like cap, elbow, tee, Reducer

WASPALOY is a nickel based age hardenable alloy that possesses high temperature strength while still having a good corrosion resistance, especially to oxidation. WASPALOY can be used at temperatures up to 650°C (1200°F) which is critical rotating applications. WASPALOY is used in gas turbine engine components, missile systems, shafts, spacers, seals, rings, casings, fasteners and many other uses in engine hardware, airframe assemblies.

Properties as per AMS 5544. Heat Treatment is as follows:
Annealing 1975°F / 30 mins and Air Cool
Solution Heat Treatment 1825°F / 2hrs and Air Cool
Stabilization Heat Treatment 1550°F /4hrs and Air Cool
Precipitation Heat Treatment 1400°F / 16 hrs and Air Cool

Waspaloy Bar Properties

• Properties as per AMS 5708 type 2 (capable of AMS 5709) Heat Treatment is as follows
• Solution Treat 1900 - 1975°F / 1-4 hours and Air Cool
• Resulting hardness not higher than 302HB
• Stabilization Heat Treatment Heat to 1550°F / 4 hrs and Air Cool
• Precipitaion Heat Treatment Heat to 1400°F / 16 hrs and Air Cool
• Resulting hardness 32-42 HRC

Specifications

• Waspaloy Rod, Bar, Wire and Forging Stock
• ASTM B 637, ISO 9723, ISO 9724, ISO 9725, AMS 5704, AMS 5706, AMS 5707, AMS 5708, AMS 5709, AMS 5828, MAM 5706, AECMA PrEN 2193, AECMA PrEN 2194, AECMA PrEN 2406, AECMA PrEN 2958, AECMA PrEN 2959, AECMA PrEN 2960, AECMA PrEN 3220.
• Waspaloy Plate, Sheet and Strip
• AMS 5544, AECMA PrEN 2195
• Waspaloy Other
• UNS N07001, W. Nr 2.4654.

Alloy 250 (UNS K92890 / Maraging 250) is an age-hardenable iron-nickel steel. Alloy 250 combines ultra-high strength (1800MPa), good toughness, readily machinable in pre-aged condition, excellent transverse properties and resistance to crack propagation. C250 is used for missile and ejector systems, slat tracks and drive shafts.

Specifications

• UNS K92890
• AMS 6512 Bar and Forging Stock
• Werkstoff Nr. 1.6359
• MIL-S-46850
• BS S162
• DTD 5212
• MSRR 6551
• MAT 102
• MIA 101
• Udimar 250
• Vascomax C250

Maraging 300 is an age hardenable (maraging) iron nickel stainless steel. Maraging 300 has exceptional strength, toughness and is resistant to crack propagation. Maraging 300 is used for tooling, transmission shafts, autosport components and light aircraft landing gear.

Specifications

• UNS K93120
• ASTM A579
• SAE AMS 6514 and AMS 6521 (UNS K93160)
• MIL S 46850, MIL S 13881
• Werkstoff Nr. 1.6358 and 1.6354
• Also known as Type 300, Maraging 300, C300
• Vdimor 300
• Vascomax C300

Maraging 350 is a nickel maraging steel which contains Cobalt as the primary strengthening agent. Maraging 350 has excellent mechanical properties, workability and heat treatment characteristics. Maraging 350 is used for missile and rocket motor cases, landing and takeoff gear components, high performance shafting, gears and fasteners.

Specifications

• MIL-S-46850
• AMS 6515
• Trade name's: Maraging 350, Vascomax C350™

Monel Alloy 400 round bars UNS N04400 EN 2.4360 contain Copper 28-34%, Manganese 2.0% max, Nickel 63%, Silicon 0.5% which is commonly used in various daily applications such as Electronic and electrical components, Fresh water and gasoline tanks, Heat exchangers, Marine hardware and fixtures, Process piping and vessels, Propeller shafts Pumps, Pump shafts Springs. Alloy 400 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Monel Alloy 400 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Monel Alloy 400 round bars along in types of Monel Alloy 400 bright round bars, Monel Alloy 400 hexagonal bars, Monel Alloy 400 square bars, Monel Alloy 400 hex bars, Monel Alloy 400 flat bars, Monel Alloy 400 threaded bars and Monel Alloy 400 forged bars. All the Monel Alloy 400 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Monel Alloy 400 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.

Types of Monel Alloy 400 bars we stock:

• Monel Alloy 400 cold drawn & polished round, hex, square, threaded, forged bars
• Monel Alloy 400 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars
• Monel Alloy 400 peeled and turned round, hex, square, threaded, forged bars
• Monel Alloy 400 buffed round, hex, square, threaded, forged bars
• Monel Alloy 400 chamfered round, hex, square, threaded, forged bars
• Monel Alloy 400 solution annealed round, hex, square, threaded, forged bars
• Monel Alloy 400 forged round, hex, square, threaded forged bars with annealed and aged condition

Application of Monel Alloy 400 round bars:
Electronic and electrical components, Fresh water and gasoline tanks, Heat exchangers, Marine hardware and fixtures, Process piping and vessels, Propeller shafts Pumps, Pump shafts Springs.

Cupro Nickel 90-10 round bars UNS C70600 Wr No. 2.0872 contain Manganese 0.7% max, Nickel 10%, Iron 1.5% which is commonly used in various daily applications such as marine hardware, piping systems and sometimes for the propellers, crankshafts and hulls of premium tugboats, fishing boats and other working boats. Cupro Nickel 90-10 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Cupro Nickel 90-10 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Cupro Nickel 90-10 round bars along in types of Cupro Nickel 90-10 bright round bars, Cupro Nickel 90-10 hexagonal bars, Cupro Nickel 90-10 square bars, Cupro Nickel 90-10 hex bars, Cupro Nickel 90-10 flat bars, Cupro Nickel 90-10 threaded bars and Cupro Nickel 90-10 forged bars. All the Cupro Nickel 90-10 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Cupro Nickel 90-10 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.

Types of Cupro Nickel 90-10 bars we stock:

• Cupro Nickel 90-10 cold drawn & polished round, hex, square, threaded, forged bars
• Cupro Nickel 90-10 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars
• Cupro Nickel 90-10 peeled and turned round, hex, square, threaded, forged bars
• Cupro Nickel 90-10 buffed round, hex, square, threaded, forged bars
• Cupro Nickel 90-10 chamfered round, hex, square, threaded, forged bars
• Cupro Nickel 90-10 solution annealed round, hex, square, threaded, forged bars
• Cupro Nickel 90-10 forged round, hex, square, threaded forged bars with annealed and aged condition

Application of Cupro Nickel 90-10 round bars:
Marine hardware, piping systems and sometimes for the propellers, crankshafts and hulls of premium tugboats, fishing boats and other working boats

Titanium Grade 1 is available in Bar, Billet, Extrusion, Plate, Sheet, Strip, Wire, Pipe, Tube, Rings and Forgings.

Titanium Grades 1-4 are unalloyed and generally known as CP (Commercially Pure). The tensile and yield strength of titanium generally increases with the grade number. Titanium is 30% stronger than Steel but nearly 50% lighter and although Aluminium is lighter, Titanium is stronger and has excellent strength retention. Due to Titanium's weight, strength and high corrosion resistance it is very popular in various manufacturing industries from aerospace, medical, shipping, military etc.

Specifications :

• AMS 4940 - Sheet, strip, plate
• MIL-T-9046J CP4 - Sheet, strip, plate
• AMS-T-9046B CP4 - Sheet, strip, plate
• ASTM B265 - Gr1 Sheet, plate
• ASTM B337 - Gr1 Pipe (withdrawn)
• ASTM B338 - Gr1 heat exchanger tube
• ASTM B348 - Gr1 bar
• ASTM B367 - Gr1 castings
• ASTM B381 - Gr1 forgings
• ASTM F67 - Gr1 Surgical Implant
• ASTM F467 - Gr1 nuts
• ASTM F468 - Gr1 bolts
• UNS R50250
• DTD 5013
• AIR 9182 T35
• Werkstoff WS3.7024 (aerospace)
• Werkstoff WS3.7025
• LN 9297
• IMI 115
• AICMA Ti-P01
• DIN 17850 (chemistry)
• DIN 17860 (sheet, plate)
• DIN 17862 (bar)
• DIN 17863 (wire)
• DIN 17864 (forgings)

Titanium Grade 2 is available in Bar, Billet, Extrusion, Plate, Sheet, Strip, Wire, Pipe, Tube, Rings and Forgings.

Titanium Grades 1-4 are unalloyed and generally known as CP (Commercially Pure). The tensile and yield strength of titanium generally increases with the grade number. Titanium is 30% stronger than Steel but nearly 50% lighter and although Aluminium is lighter, Titanium is stronger and has excellent strength retention. Due to Titanium's weight, strength and high corrosion resistance it is very popular in various manufacturing industries from aerospace, medical, shipping, military etc.

Specifications

• AMS 4902F - Sheet, strip and plate (annealed)
• AMS 4941C - Tubing, welded (annealed)
• AMS 4942C - Tubing, seamless (annealed)
• AMS 4951F - Welding wire, commercially pure
• MIL-T-9046 (TYPE 1 COMP A) CP3
• BS 3TA1 - Sheet, strip
• BS 2TA2 - Sheet, strip
• BS 3TA3 - Bar (obsolete)
• BS 2TA4 - Forgings (obsolete)
• BS 2TA5 - Forgings (obsolete)
• ASTM B265 Gr2 - Sheet, plate
• ASTM B337 Gr2 - Pipe (withdrawn)
• ASTM B338 Gr2 - Heat exchange tube
• ASTM B348 Gr2 - Bar
• ASTM B367 Gr2 - Castings
• ASTM B381 Gr2 - Forgings
• ASTM F67 Gr2 - Surgical Implant
• ASTM F467 Gr2 - Nuts
• ASTM F468 Gr2 - Bolts
• UNS R50400
• DTD 5073
• AIR 9182 T40
• Werkstoff 3.7034 (Aerospace)
• Werkstoff 3.7035
• LN 9297
• DIN 17850, 17860, 17862, 17863 and 17864
• IMI 125
• AICMA Ti-P 02
• AIMS 08 -18- 002
• ABS 5012

Titanium Grade 5 round bars UNS R56400 WR NO 3.7165 contain Aluminium 5.5-6.75 % max, Iron 0.40% max which is commonly used in various daily applications such as Aerospace, Surgical Implants, Jewellery, Chemical, Springs, Bolts. Titanium Gr 5 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Titanium Grade 5 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Titanium Grade 5 round bars along in types of Titanium Grade 5 bright round bars, Titanium Grade 5 hexagonal bars, Titanium Grade 5 square bars, Titanium Grade 5 hex bars, Titanium Grade 5 flat bars, Titanium Grade 5 threaded bars and Titanium Grade 5 forged bars. All the Titanium Grade 5 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Titanium Grade 5 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.

Types of Titanium Grade 5 bars we stock:

• Titanium Grade 5 cold drawn & polished round, hex, square, threaded, forged bars
• Titanium Grade 5 cold drawn, centre less ground and polished round, hex, square, threaded, forged bars
• Titanium Grade 5 peeled and turned round, hex, square, threaded, forged bars
• Titanium Grade 5 buffed round, hex, square, threaded, forged bars
• Titanium Grade 5 chamfered round, hex, square, threaded, forged bars
• Titanium Grade 5 solution annealed round, hex, square, threaded, forged bars
• Titanium Grade 5 forged round, hex, square, threaded forged bars with annealed and aged condition

Application of Titanium Grade 5 round bars:
Aerospace, Surgical Implants, Jewellery, Chemical, springs, bolts.

Mumetal is available in Mumetal wire, Mumetal Round bar, Mumetal Forged bar, Mumetal hex bar, Mumetal Flat bar, Mumetal Circles, Mumetal Ring, Mumetal Tube, Mumetal seamless Pipe, Mumetal Welded / ERW Pipe, Mumetal Sheet, Mumetal Plate, Mumetal Coil, Mumetal Flanges, Mumetal fasteners, Mumetal Socket weld Fittings, Mumetal ferrule fittings, Mumetal Buttweld fittings Like cap, elbow, tee, Reducer.

Mumetal is 80% nickel with additions of iron and molybdenum as main elements in turn this alloy offers an extremely high initial permeability. It is only moderately resistant to moisture and atmospheric corrosion, it used mainly in in transformer cores but is well known for its magnetic properties which are used for shielding electrical components from magnetic fields. "HYMU 80" has a minimum DC permeability of 80, 000 at a flux density of 40 gauss when heat treated by the recommended procedure and test in accordance with ASTM 596

Physical Properties (Annealed Condition)

• Coefficient of Thermal Expansion, in./in. °F x 10
• 7.2in/in °F x 10-6 between 70 and 400F
• 13cm/cm/ °C 10-6 between 30 and 204 °C

Specifications

• Permalloy
• HYMU 80
• MAG 7904
• MIL N 14411 C, COMP. 1
• ASTM A753-78 and ASTM 596

Hiperco 50 round bars contains 49% cobalt and 2% vanadium which is commonly used for magnetic cores in electrical equipment. In strip form used for aircraft generators and motors. Electromagnets for medical (radiology) applications. Motor laminations, transducers, poles and cores. Hiperco 50 bars are available in ASTM A-801 and AMS A-47182 specifications. We Export and Stock Hiperco 50 round bars along in types of Hiperco 50 bright round bars, Hiperco 50 hexagonal bars, Hiperco 50 square bars Hiperco 50 hex bars, Hiperco 50 flat bars, Hiperco 50 threaded bars and Hiperco 50 forged bars. All the Hiperco 50 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Hiperco 50 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.

Types of Hiperco 50 bars we stock:

• Hiperco 50 round bars solution annealed round, hex, square, threaded, forged bars
• Hiperco 50 round bars forged round, hex, square, threaded forged bars with annealed and aged condition.

Application of Hiperco 50 round bars:
Used for magnetic cores in electrical equipment. In strip form used for aircraft generators and motors. Electromagnets for medical (radiology) applications. Motor laminations, transducers, poles and cores.

At Harsh Steel Nickel 263 is available in Nimonic 263 wire, Nimonic 263 Round bar, Nimonic 263 Forged bar, Nimonic 263 hex bar, Nimonic 263 Flat bar, Nimonic 263 Circles, Nimonic 263 Ring, Nimonic 263 Tube, Nimonic 263 seamless Pipe, Nimonic 263 Welded / ERW Pipe, Nimonic 263 Sheet, Nimonic 263 Plate, Nimonic 263 Coil, Nimonic 263 Flanges, Nimonic 263 fasteners, Nimonic 263 Socket weld Fittings, Nimonic 263 ferrule fittings, Nimonic 263 Buttweld fittings Like cap, elbow, tee, Reducer.

Nimonic alloy 263 is an age-hardenable nickel-cobalt-chrome-molybdenum alloy which was designed to have excellent fabrication characteristics in the annealed condition but also very good aged strength properties. Alloy 263 is easier to form or weld than other materials such as Waspaloy or Rene 41 and exhibits excellent intermediate temperature ductility. Alloy 263 is supplied in the annealed condition and its excellent ductility in this condition makes it suitable for cold forming as well as hot working. Alloy 263 can be welded using matching composition filler wire in both TIG and MIG forms. The recommended heat treatments for Nimonic 263 are as follows:

Specifications

• UNS N07263
• Werkstoff Nr. 2.4650
• BS HR10 Rod and Bar
• BS HR 206 Plate, Sheet, Strip
• BS HR 404 Seamless Tube
• AECMA PrEn 2199 Bar
• AECMA PrEn 2200 Forgings
• AECMA PrEn 2201 Bar
• AECMA PrEn 2202 Tube
• AECMA PrEn 2203 Sheet, Strip
• AECMA PrEn 2418 Plate
• DIN 17750 Plate, Sheet, Strip
• DIN 17751 Pipe and Tube
• DIN 17752 Bar and Rod
• DIN 17753 Wire
• DIN 17754 Forgings
• AMS 5872 Sheet, Plate and Strip
• AMS 5886 Bar, Forgings, Rings
• AFNOR NCK 20 D
• AIR 9165 Sheet, Plate, Rod, Bar and Forgings
• MSRR 7035
• MSRR 7036
• GE B50A774A

Cupro Nickel 70-30 round bars UNS C71500 Wr No. 2.0872 contain Manganese 1.0% max, Nickel 30%, Iron 0.7% which is commonly used in various daily applications such as Desalination units, Hydraulic lines, Fish cages for aquaculture, Heat exchangers and condensers, Sea water pipework, Offshore fire water systems, Tubes for power plants and ships, Pumps, valves, sheathing and fittings for ship hulls. Cupro Nickel 70-30 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Cupro Nickel 70-30 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Cupro Nickel 70-30 round bars along in types of Cupro Nickel 70-30 bright round bars, Cupro Nickel 70-30 hexagonal bars, Cupro Nickel 70-30 square bars, Cupro Nickel 70-30 hex bars, Cupro Nickel 70-30 flat bars, Cupro Nickel 70-30 threaded bars and Cupro Nickel 70-30 forged bars. All the Cupro Nickel 70-30 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Cupro Nickel 70-30 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.

Cupro Nickel 70-30 round bars:

• Thickness of Cupro Nickel 70-30 bars- 3mm up to 600mm
• Length of Cupro Nickel 70-30 bars– 2mm to 6000mm
• Tolerance of Cupro Nickel 70-30 bars - h8, h9, h10, h11, k12, DIN 1013, A484, GRIT 240 & 320

Application of Cupro Nickel 70-30 round bars:
Desalination units, Hydraulic lines, Fish cages for aquaculture, Heat exchangers and condensers, Sea water pipework, Offshore fire water systems, Tubes for power plants and ships, Pumps, valves, sheathing and fittings for ship hulls.