Our Product / Services
Stainless steel 316TI round bars UNS S31635 WR. NO 1.4571 contain 10-14% nickel which is commonly used in various daily applications such as Refineries, Thermal pipe plants, Pharmaceutical industry, Oil Refineries, Textile Industries, Nuclear plants, Chemical Industries, Dairy Products, Power Plant, Food Products, Petrochemicals industry, Sugar industry, Engineering industry, Chemical industry. This alloy is also used to form springs, washers, screens and cables. Stainless steel 316TI bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Stainless steel 316TI round bars along in types of stainless steel 316TI bright round bars, Stainless steel 316TI hexagonal bars, stainless steel 316TI square bars, stainless steel 316TI hex bars, stainless steel 316TI flat bars, stainless steel 316TI threaded bars and stainless steel 316TI forged bars. All the stainless steel 316TI bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-208 we export stainless steel 316TI rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.
Types of stainless steel 316 bars we stock:
Application of stainless steel 316 round bars:Food preparation equipment, especially in chloride environments, Chemical processing, equipment, Laboratory benches and equipment, Rubber, plastics, pulp & paper machinery, Pollution control equipment, Boat fittings, value and pump trim, Heat exchangers, Pharmaceutical and textile industries, Condensers, evaporators and tanks.
Stainless Steel 321 is available in Capillary tube, Instrument tube, Precision tube and Hydraulic tube. On request Stainless Steel 321 can also be supplied in Coiled Tube with a seamless and welded execution.
Stainless Steel 321 Capillary tube can be either harddrawn (hardness 260-330 HV) or annealed (hardness 180 HV). The tolerances are according to DIN 17458/ISO 1127 D4/T3. We can also supply Welded/ Redrawn (in the same conditions).
Capillary tubes can be supplied with various point styles : Blunt end - square cut /Chamfered edge / Radiused/ Tapered. Flat ground-point, Back cut bevel, Lancet level, Closed round end, Flared end and Threaded end
Specifications :
Technical Data Sheet
Chemical Composition Limits | ||||||||||
Weight % | C | Si | Mn | P + S | Cr | Ni | Ti | N | Fe | Mo |
AMS 5510 Alloy 321 |
0.08 max | 0.25-1.00 | 2.0 max | 0.040 P 0.030 S |
17-19 | 43720 | 0.7 max | 0.1 max | Bal | 0.75 |
Alloy 330/Stainless Steel 330 UNS N08330 Werkstoff 1.4886 :Alloy 330 is an austenitic heat and corrosion resisting alloy which has an exceptional combination of strength and resistance to carburization, oxidation and thermal shock. Alloy 330 is used in a wide range of applications in high temperature industrial environments.
Stock Availability Of Contact Sales
Grade | US Aerospace/Military | US Commercial | European Specification | Other |
330 | AMS 5592 Sheet / strip/ plate AMS 5716 Bars / wire / forging |
ASTM B511 / ASME SB511 ASTM B512 / ASME SB512 ASTM B535 / ASME SB535 ASTM B536 / ASME SB536 ASTM B710 / ASME SB710 ASTM B739 / ASME SB739 |
Werkstoff 1.4886 | UNS N08330 |
Technical Data Sheet
Chemical Composition Limits | ||||||||||||
Weight % | Cr | Ni | Si | C | Mn | P | S | Fe | Mo | Cu | Sn | Pb |
330 | 17-20 | 34-37 | 0.75-1.5 | 0.08 max | 2.00 max | 0.030 max | 0.030 max | Bal | 0.75 max | 0.50 max | 0.025 max | 0.005 max |
Stainless Steel 347 (AMS 5512/AMS 5646) UNS S30347 Werkstoff 1.4544/1.4546/1.4550 :Alloy 347 is a chromium nickel stainless steel which has been modified by the addition of columbium and tantalum. The main advantage of this is an excellent resistance to intergranular corrosion which is common to other austenitic stainless steels following exposure to temperatures of 800° to 1500°F. Type 347 has about the same general corrosion resistance as Type 302.
Type 347 is generally used where corrosive conditions are severe, such as harsh steel exhaust stacks, manifolds and ring collectors. Type 347 is also used for heavy welded assemblies which cannot be annealed after welding or where the operating conditions cause exposure within the temperature range between 800° to 1500°F.
Specifications :
Stock Availability Of Contact Sales
Grade | US Aerospace/Military | US Commercial | British Specification | European Specification | Other |
347347H 347 Tube |
AMS 5512 Sheet / strip / plate AMS 5556 Seamless/ welded tube AMS 5558 Welded /thin wall tube AMS 5571 Seamless tube, AMS 5575 Welded tube AMS 5646 Bars / wire / forging AMS 5654 Bars (harsh steel quality) AMS 5674 Wire, AMS 5680 Wire, QQ-S-763, MIL-T-6737, MIL-T-8606 Seamless tube MIL-T-8606 Welded tube MIL-T-8808 Seamless tube MIL-T-8808 Welded tube, MIL-S-6721 |
ASTM A240 / ASME SA240 ASTM A167 / ASME SA167 ASTM A276 / ASME SA276 ASTM A314 / ASME SA314 ASTM A479 / ASME A479 |
BS 2S130 BS 2T66 Tube BS T72 Tube BS S527 Sheet BS 970; 347S17 EN58F / EN58G MSRR 6522 MSRR 6524 |
Werkstoff 1.4544 Werkstoff 1.4546 Werkstoff 1.4550 Werkstoff 1.5446* AFNOR Z6CNNb18-11 |
UNS S30347 |
Technical Data Sheet
Chemical Composition Limits | ||||||||||||
Weight % | C | P | Si | Ni | Mn | S | Cr | Cb + Ta | Fe | Co | Mo | Cu |
347 | 0.08 max | 0.040 max | 1.00 max | 43720 | 2.0 max | 0.030 max | 17-19 | 10 x C min | Bal | 1.00 max only AMS 5646 |
0.75 max | 0.75 max |
347H | 0.04-0.10 | 0.040 max | 1.00 max | 43720 | 2.0 max | 0.030 max | 17-19 | 10 x C min | Bal |
Typical Mechanical Properties
Material | Yield Strength (ksi) | Tensile Strength (ksi) | % Elongation | Hardness HB |
Alloy 347 Sheet (Sol Trtd) AMS 5512 |
25 | 70-105 | 40 | - |
Alloy 347 Bar (Sol Trtd) AMS 5646 |
- | - | - | 255 max |
Stainless Steel 410 (AMS 5504) UNS S41000:Type 410 is a basic hardenable martensitic stainless steel and is well suited for use in highly stressed parts where properties such as corrosion resistance, good strength and ductility are required. 410 is used for steam / gas turbine blades and buckets, bushings, valve components, fasteners, nuclear reactor control rod mechanisms, petrochemical equipment and machine parts.
Resisitance to oxidation and corrosion - Alloy 410 exhibits good corrosion resistance to atmospheric corrosion, potable water, food acids and to mildly corrosive chemical environments because of its ability to form a tightly adherent oxide film which protects the surfaces from further attack.
Specifications ;Type 410 Stainless Steel is covered by the following specifications:
Stainless Steel 410 (AMS 5504) UNS S41000
Grade | US Aerospace/Military | US Commercial | Other |
410410 Mod | AMS 5504 Sheet / strip / plate AMS 5505 Sheet / strip / plate (Mod) AMS 5591 Seamless tube AMS 5609 Bars / wire AMS 5611 Bars / wire / forging AMS 5612 Bars / wire / forging AMS 5613 Bars / wire / forging AMS 5614 Bars / wire / forging QQ-S-763, QQ-S-766 |
ASTM A176 / ASME SA176 ASTM A240 / ASME SA240 ASTM A276 / ASME SA276 ASTM A479 / ASME A479 ASTM A493 / ASME SA493 ASTM A580 / ASME SA580 ASTM F899 |
UNS S41000 |
Technical Data Sheet
Chemical Composition Limits | |||||||
Weight % | C | Si | Mn | P | S | Cr | Fe |
Alloy 410 | 0.15 max | 1.0 max | 1.0 max | 0.040 max | 0.030 max | 11.5-13.5 | Bal |
Typical Mechanical Properties
Material | Tempering Temp °C (°F) | 0.2 % Yield Strength (Mpa) | Ultimate Tensile Strength (Mpa) | % Elongation in 2" | % Reduction of Area | Charpy V Notch Impact Strength (J) | Hardness Brinell |
Alloy 410 Bar Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs |
260 (500) | 1089 | 1331 | 17 | 62 | 76 | 401 |
Alloy 410 Bar Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs |
317 (700) | 1069 | 1296 | 17 | 60 | 66 | 401 |
Alloy 410 Bar Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs |
482 (900) | 1014 | 1303 | 18 | 58 | 38 | 401 |
Alloy 410 Bar Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs |
538 (1000) | 917 | 965 | 19 | 62 | 33 | 285 |
Alloy 410 Bar Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs |
593 (1100) | 724 | 827 | 20 | 63 | 52 | 248 |
Alloy 410 Bar Hardened 1850°F (1010°C) 30 mins, oil quench, tempered 4 Hrs |
649 (1200) | 634 | 731 | 21 | 65 | 119 | 223 |
Alloy 904L is an austenitic stainless steel intended for use under severe corrosion conditions, with a very good resistance to attacks in acidic environment, as sulphuric, phosphoric and acetic acid. Very good resistance to pitting corrosion, stress corrosion cracking and a much better resistance to crevice corrosion than steels of alloy 304L and alloy 316L. Used for chemical processing, pollution control equipment, oil and gas well piping, heat exchangers, acid production and pickling equipment.
Specifications
AvailabilityAlloy 904L is available in Instrument tube, Precision tube and Hydraulic tube. On request Alloy 904L Coiled Tube can be supplied with a stainless steel seamless and welded execution. For all stock availability of contact Sales.
Technical Data Sheet
Chemical Composition Limits | |||||||||
Weight% | Ni | Cr | Mo | Cu | Mn | Si | S | C | N |
904L | 23-28 | 19-23 | 43560 | 43467 | 2 max | 1 max | 0.035 max | 0.020 max | 0.10 max |
Stainless steel 301 strips UNS S30100 WR. NO 1.4310 contain 6-8% nickel 0.75% copper. Stainless steel 301 grades may also be used in automotive trim, kitchen equipment, hose clamps, wheel covers, aircraft components and a wide variety of industrial applications. Stainless steel 301 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Stainless steel 301 round bars along in types of stainless steel 301 bright round bars, Stainless steel 301 hexagonal bars, stainless steel 301 square bars, stainless steel 301 hex bars, stainless steel 301 flat bars, stainless steel 301 threaded bars and stainless steel 301 forged bars. All the stainless steel 301 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-208 we export stainless steel 301 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.
Harsh steel Export and Supply Stainless steel 301 strips capabilities include:
Harsh steel provides Stainless steel 301 Cold rolled mill finish strips such as:
Stainless Steel 301 Strip Applications:
Stainless Steel 301 Strip Corrosion Resistance:
Stainless Steel 301 Strip Heat Resistance:
Stainless Steel 301 Strip Heat Treatment:
Stainless Steel 301 Strip Cold Working:
Stainless Steel 301 Strip Welding:
Stainless Steel coils available in following grades : 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316H, 316L, 316TI, 317, 317L, 321, 321H, 347, 347H, 409, 410, 410S, 430, 202, 201Nickel Alloy coils available in following grades : such as Monel, Nickel, Inconel, Hastalloy, Copper, Aluminium, Titanium, Tantalum, Bismuth.
Duplex & Super Duplex coils available in following grades : S31803, S32750, S32760, S31500, S32205.
Stainless Steel 301 Coil Chemical Properties:
% | Cr | Ni | C | Si | Mn | P | S | N | |
301 | Min: | 16 | 6 | - | - | - | - | - | - |
Max: | 18 | 8 | 0.15 | 1.00 | 2 | 0.045 | 0.030 | 0.10 |
Stainless Steel 301 Coil Physical Properties:
Grade/Temper | Tensile Strength ksi (min.) | Yield Strength 0.2% ksi (min.) | Elongation -% in 50 mm (min.) |
301 1/4 | 125 | 75 | 25 |
301 1/2 | 150 | 110 | 18 |
301 Full Hard | 185 | 140 | 9 |
Stainless Steel 301 Coil Physical Properties:
Denstiy lbm/in3 | Coefficient of Thermal Expansion (min/in)-°F | Electrical Resistivity mW-in | Thermal Conductivity BTU/hr-ft-°F | Melting Range | |||||||
0.29 | at 68 – 212°F | at 68 – 932°F | at 68 – 1450°F | at 68°°F | at 212°F | at 392°F | at 752°F | at 1112°F | at 1472°F | at 68 – 212°F | 2550-2590°F |
9.2 | 10.4 | 10.9 | 28.3 | 30.7 | 33.8 | 39.4 | 43.7 | 47.6 | 9.4 |
Type 316 and 316L is available in Sheet, Strip, Plate, Angles, Tube, Bar (Hexagon, Round, Flat, Square), Forging Stock, Welding Wire. 316 Foil (Shim) is available in various thicknesses.
Type 316 is an austenitic chromium nickel stainless steel. It also contains molybdenum which increases its general corrosion resistance as well as the mechanical properties at elevated temperatures. The properties of type 316 are similar to type 304, however 316 is stronger at elevated temperatures amd also corrosion resistance is improved particularly against sulphates, phosphates and other salts as well as reducing acids such as sulphuric, sulphurous and phosphoric. Type 316L is an extra low carbon version of type 316.
Specifications
Stock Availability Of Contact Sales
Grade | US Aerospace/Military | US Commercial | British Specification | European Specification | Other |
316316L316LVM (Vac Melt)316Ti | AMS 5507 Sheet / strip/ plate (316L) AMS 5524 Sheet / strip / plate (316) AMS 5573 Seamless tube AMS 5584 Seamless/welded tube AMS 5648 Bar / wire / forging (316) AMS 5649 Bar / wire / forging (FM) AMS 5653 Bar / wire / forging (316L) QQ-S-763 AMS-S-7720 MIL-S-5059 MIL-S-7720 |
ASTM A240 / ASME SA240 ASTM A167 / ASME SA167 ASTM A666 ASTM A276 / ASME SA276 ASTM A479 / ASME A479 ASTM A484 / ASME SA484 ASTM F138 ASTM A320 Grd B8M ASTM A193 Grd B8M Cl1 |
BS 970; 316S31 / 316S12 EN 58J |
Werkstoff 1.4401 Werkstoff 1.4404 Werkstoff 1.4427 Werkstoff 1.4435 Werkstoff 1.4441 Werkstoff 1.4571 AFNOR Z6CND17-11 AFNOR Z2CND17-12 |
UNS S31600 UNS S31603 |
Technical Data Sheet
Chemical Composition Limits | ||||||||||
Weight % | C | Mn | P | S | Si | Cr | Ni | Mo | Cu | Fe |
316 | 0.08 | 1.25-2.00 | 0.04 | 0.03 | 1.00 max | 16-18 | 43752 | 43499 | 1.00 max | Bal |
316L | 0.03 | 1.25-2.00 | 0.04 | 0.03 | 1.00 max | 16-18 | 43752 | 43499 | 1.00 max | Bal |
Super Duplex Steel S32760 is the most common super duplex grade it has an enhanced pitting and crevice corrosion resistance compared with the ordinary austenitic or duplex types.
AvailabilitySuper Duplex Steel S32760 is available in Bar from 6mm dia to 270mm dia and Forging Stock. For all stock availability of contact Sales.
Specifications
Super Duplex Steel S32760 (F55/WS 1.4501)
Grade | US Aerospace/Military | US Commercial | European Specification | Other |
---|---|---|---|---|
Super Duplex S32760 | ASTM A182 F55 ASTM A276 F55 ASTM A479 F55, AISI F55 |
WS 1.4501 X2CrNiMoCuWN25.7.4 AFNOR Z3CND25.06Az, EN10088-3 |
UNS S32760 ZERON 100 NACE MR01-75 PED 97/23/EC |
Technical Data Sheet
Weight % | C | Mn | P | S | Si | Cr | Ni | Mo | N | W |
---|---|---|---|---|---|---|---|---|---|---|
Super Duplex F55 | 0.03 max | 1.00 max | 0.03 max | 0.01 max | 1 max | 24-26 | 4.5-6.5 | 03/04/19 | 0.25 | 0.08-0.20 |
Typical Mechanical Properties
Alloy | Tensile Strength Min | 0.2% Yield Strength Min | Elongation % in 2" (50.8mm) | Hardness HRC |
---|---|---|---|---|
Super Duplex F55 | 860 | 720 min | 16 min | 270 max |
Product Description
Aesteiron Steels LLP, is one of the leading manufacturers & suppliers of X4CrNiMo16-5-1 Pipes & Tubes.We are:
X4CrNiMo16-5-1 Pipes Stockist
X4CrNiMo16-5-1 Pipes Suppliers
X4CrNiMo16-5-1 Pipes Traders
X4CrNiMo16-5-1 Pipes Dealers
X4CrNiMo16-5-1 Pipes Manufacturers
X4CrNiMo16-5-1 Pipes Exporters
Chemical Composition
Carbon; 0.06max
Silicon; 0.7max
Manganese; 1.5max
Nickel; 4-6
Phosphorus; 0.040max
Sulfur; 0.015max
Chromium; 15-17
Molybdenum; 0.8-1.5
Nitrogen; 0.02ma
Types of stainless steel 15-5PH bars we stock:
Application of stainless steel 15-5PH round bars:Aircraft components, Cylinders, Engine parts, Fittings, Gears, Hallow shafts, Marine gas turbine compressor sections, Paper mill equipment, Shafts, Valves.
Types of stainless steel AL6XN bars we stock:
Application of stainless steel AL6XN round bars:Machined Components, Valves, Machine tools, Pump Shafts, Fasteners, Dairy Equipment’s, Surgical & Medical Parts, Threaded Bars, Studs, Bolts, Hardware application & Kitchen application.
Types of stainless steel 201 bars we stock:
Application of stainless steel 201 round bars:Machined Components, Valves, Machine tools, Pump Shafts, Fasteners, Dairy Equipment’s, Surgical & Medical Parts, Threaded Bars, Studs, Bolts, Hardware application & Kitchen application.
Harsh Steel is also an Exporter and Manufacturer of below Stainless Steel 201 Products:-
Types of stainless steel 204CU bars we stock:
Harsh Steel is also an Exporter and Manufacturer of below Stainless Steel 204CU Products:-
Types of stainless steel 302 bars we stock:
Application of stainless steel 302 round bars:Stamping, spinning and wire forming industry. This alloy is also used to form springs, washers, screens and cables.
Types of stainless steel 304H bars we stock:
Application of stainless steel 304H round bars:Refineries, Thermal pipe plants, Pharmaceutical industry, Oil Refineries, Textile Industries, Nuclear plants, Chemical Industries, Dairy Products, Power Plant, Food Products, Petrochemicals industry, Sugar industry, Engineering industry, and Chemical industry.
Types of stainless steel 304LN bars we stock:
Application of stainless steel 304LN round bars:Heat exchangers, Chemical industry, Food industry, Petroleum industry, Fabrication industry, nuclear industry.
Types of stainless steel 308/308L bars we stock:
Application of stainless steel 308/308L round bars:Heat exchangers, Chemical industry, Food industry, Petroleum industry, Fabrication industry, Nuclear industry.
Types of stainless steel 309L bars we stock:
Application of stainless steel 309L round bars:Heating elements, Aircraft and jet engine parts, Heat exchangers, Carburizing annealing products, Sulfite liquor handling equipment, Kiln liners, Boiler baffles, Refinery and chemical processing equipment, Auto exhaust parts.
Types of stainless steel 309S bars we stock:
Application of stainless steel 309S round bars:Heating elements, Aircraft and jet engine parts, Heat exchangers, Carburizing annealing products, Sulphite liquor handling equipment, Kiln liners, Boiler baffles, Refinery and chemical processing equipment, Auto exhaust parts.
Types of stainless steel 310S bars we stock:
Application of stainless steel 310S round bars:Furnace Parts, Oil Burner Parts , Heat Exchangers , Welding Filler Wire and Electrodes , Annealing Covers , Combustion Tubes, Fire Box Sheets.
Types of stainless steel 316LVM bars we stock:
Application of stainless steel 316LVM round bars:Guide wires, cardiac stents, surgical instruments and tools, blood lancets, High precision electronics, suture wire, orthopaedic cables, skin closure staples, catheters, small machined parts, Body jewellery, bone pins.
Types of stainless steel 317L bars we stock:
Application of stainless steel 317L round bars:Flue-gas desulfurization systems, Chemical process vessels, Petrochemical, Pulp and Paper, Condensers in power generation.
Types of stainless steel 317LN bars we stock:
Application of stainless steel 317LN round bars:Flue-gas desulfurization systems, Chemical process vessels, Petrochemical, Pulp and Paper, Condensers in power generation.
Types of stainless steel 13-8MO bars we stock:
Application of stainless steel 13-8MO round bars:Aerospace components, landing gear, nuclear reactor components, petrochemical industry, injection moulding equipment etc. Alloy 13-8 in the annealed condition can be strengthened further by relatively low temperature heat treatment.
Harsh Steelis a specialist supplier of stainless steel round bar. It can be supplied in a range of sizes and finishes with varying tolerances. Cold-finished stainless steel bar is usually supplied to meet the international standards of ASTM A276/A484 or A582/A484M.
Harsh Steel supply other stainless grades, including 202, ASTM A312 in 304/304L and 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410. In duplex grades, we can supply 2205 and 2507. Some nickel Alloy such as alloy 200/201, C276, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and others Titanium alloys and copper alloys are also available
Harsh Steel supply other stainless grades, including 202, ASTM A312 in 304/304L and 316/316L, 304H, 316H, 309/S, 310/S, 317/L, 321/H, 347/H, 904L, 330, 254SMO, 410. In duplex grades, we can supply 2205 and 2507. Some nickel Alloy such as alloy 200/201, C276, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and others Titanium alloys and copper alloys are also available
1.2714 is a German Hot work alloy steel material grade.it is shock-resisting steel. it belongs to DIN 17350 standard. Digital Grade material number W-Nr 1.2714, Metal Steel grade 56NiCrMoV7. It is a die steel, use in extrusion molds, Hot Cast molds. like aluminum production, Aluminum cast mold. Our Tool Steel material 100 % ultrasonic tested at a good price. Small size steel products make by hot rolled, large size steel products make by forging.
1.2714 cold working tool steel is for general-purpose tools and dies where greater toughness is required, but with some sacrifice of abrasion resistance.
Typically used below applications:
spindles,
forming rolls,
punches,
blanking and forming dies,
trimmer dies,
clutch parts,
pawls,
bearings,
chucks parts,
rollers,
knuckle pins,
clutch pins,
shear blades
Alloy A286 round bars UNS S66286 EN 1.4980 contain Chromium 13.5-16.0%, Manganese 2.0% max, Nickel 24.0-27.0%, Silicon 1.0% max, Carbon 0.08% max, Aluminium 0.35% maximum which is commonly used in various daily applications such as Jet engine components, High temperature fasteners, springs, Non-magnetic cryogenic equipment. Alloy A286 in the annealed condition can be strengthened further by relatively low temperature heat treatment. Alloy A286 bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Alloy A286 round bars along in types of Alloy A286 bright round bars, Alloy A286 hexagonal bars, Alloy A286 square bars, Alloy A286 hex bars, Alloy A286 flat bars, Alloy A286 threaded bars and Alloy A286 forged bars. All the Alloy A286 bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 6001-208 we export Alloy A286 rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.
Types of Alloy A286 bars we stock:
Application of Alloy A286 round bars:Jet engine components, High temperature fasteners, springs, Non-magnetic cryogenic equipment.
Kovar round bars UNS K94610 EN 1.3981 contain Chromium 0.20% max, Manganese 0.5% max, Nickel 29% max, Silicon 0.2% max which is commonly used in various daily applications such as Kovar open die forging parts, forging pieces, forging nozzles forged crankshaft that is used in Dimensionally stable instruments and optical devices, Containers for LNG tankers, Transfer lines for LNG. Kovar in the annealed condition can be strengthened further by relatively low temperature heat treatment. Kovar bars are available in ASTM A276, ASTM A479, ASTM A484, ASTM A582, ASTM A473 specifications. We Export and Stock Kovar round bars along in types of Kovar bright round bars, Kovar hexagonal bars, Kovar square bars, Kovar hex bars, Kovar flat bars, Kovar threaded bars and Kovar forged bars. All the Kovar bars are available in hot rolled, peeled, annealed cold conditions. Being an ISO 9001-2008 we export Kovar rounds, hex, square & forged bars with Mill Test certificates or Third party test certificates.
Types of Kovar bars we stock:
Application of Kovar round bars:Kovar open die forging parts, forging pieces, forging nozzles forged crankshaft that is used in dimensionally stable instruments and optical devices, Containers for LNG tankers, Transfer lines for LNG.