The Erbium Doped Fiber Amplifiers (EDFA) has generated a lot of interest in both optical communication industry and research community because of their inherent ability to directly amplify signals in the optical domain. Optiwave has developed one such optical amplifier based on Emore...
Features : Solid state design Input : Accepts both positive or negative input Typical gain : 600 +/-10% Adj. pulse shaping from 0.1 to 5 micro seconds Output : 0 to 8 volts positive Etc.
Linear Amplifer LA 520 is a solid state pulse amplifier designed to shape and faithfully amplifies detector pre-amplifier output pulses to operable levels. Many of the Nuclear Detectors give small amplitude pulse outputs. These output pulses cannot be directly counted or analysedmore...
Feature : Compact Solid state circuit design,,Suitable for wide range of NaI integral assemblies,Choice of both focus and gain adjustments by presets Etc.
Specifications : Socket:Standard 14 contact pin
Voltage Divider : 10 stage, directly compatible with all 2, 3 and 5 inch diameter PM tubes used in standard Bicron Etc
Pre-amplifier PA311 manufactured by NUCLEONIX essentially has a standard 14 contact socket, 10-stage voltage divider, pre-amplifier electronics. The Preamplifier is designed to suit a wide range of Standard detectors (Scintillation), integral assemblies. NUCLEONIX offers integralmore...
Gain Range : Continuously variable from X4 to X1500.
Spectroscopy Amplifier Type : SA524 is a high performance nuclear pulse shaping amplifier, ideally suited for use with all types of detectors such as germanium, silicon surface barrier and Si(Li) detectors. This is a single width NIM module with pile-up rejector (PUR), gated basemore...
the erbium doped fiber amplifiers (edfa) has generated a lot of interest in both optical communication industry and research community because of their inherent ability to directly amplify signals in the optical domain. Optiwave has developed one such optical amplifier based on emore...
The Power Edge ‘Class H’ amplifiers are designed for pure power. Thanks to the big power reserve, excellent limiters and protections they can be used in all kinds of different applications such as discotheques, clubs, mobile audio, PA, rental, theater, Very efficient cooling more...
The Erbium Doped Fiber Amplifiers (EDFA) has become one of the key products required in the day-to-day activities like communication, entertainment, etc. This ubiquitous presence & requirement has led to the development of first indigenous EDFA that meets all the current & futuremore...
We Offer Optical Amplifier. The High Power Optical Amplifiers Model 916H is primarily used in FTTH distribution applications. It comes with single input port and up to 32 output ports. It is configured for high output powers up to +33 dBm and can service more than 1000 CPEs/ONTs.more...
480 W power amplifier in a compact housing » 70 V / 100 V and 8 ohm outputs » Dual inputs with priority switching » 100 V input for slave operation on 100 V speaker line » Temperature controlled forced front to back ventilation, directly stackable » Mains, battery back-up, amore...
The Plena system pre-amplifier is a versatile, highperformance unit with call and mono BGM (background music). It fulfills a wide variety of public address requirements at a surprisingly low cost. It can provide dual channel operation for simultaneous calls and BGM for up to six more...
Unique Features » 4 mic. level balanced inputs » Built-in speech filter for increased intelligibility » Priority and VOX operation » Telephone and emergency input with priority » Balanced phone jack / DIN input connections » Three stereo line input selection » Selectable 2more...
We guarantee you the 'wow' factor when you give our voice amplifier a try. With 8 watts power coupled with a 2 ¾ “ aluminum reinforced speaker cone, crystal clear and undistorted voice reproduction is what you can hear. more...
For Buyer 
For Seller 
Help 
Ask a question about 
