Call Us : +91-11-45822333

Ac Voltage Tester Manufacturers and Suppliers

YOU ARE IN : Home / Business Directory / Electronic Testing Equipment / Ac Voltage Tester

View 182 Products below

  • Ac Voltage Tester

    • Voltage : 380/400V, 50/60HZ AC supply
    • O/p Voltage : Up to 800KV and 4A

    AC High Voltage High capacity testers are specially designed for testing cables, Generators, transformers and other high capacitive equipments as per National and International Standards. During manufacturing each unit is tested at multiple stages, thus ensuring consistency and best quality. More...

  • Ac Voltage Tester

    • dot-matrix,TFT-LCD display : 480×272
    • Output voltage: : AC:5kV/10mA; DC:6kV/5mA

    Randomly set Voltage rising time and testing time, Test voltage of insulation resistance: 0.10kV-1.00kV, Test range of insulation resistance:1M -1000M, Provide 4 channels, 8 channels scan interface, Rapid Discharge and Arc detection More...

  • Vt-2 Non-contact Ac Voltage Testers

    • Features: : » Non-Contact Detection of AC Voltage from 90 VAC to 1000 VAC , » Rugged, double molded case
    • Specification : » Indicators: LED and audible beeper , » Overvoltage category: Cat III 1000 V

    The Non-contact AC Voltage Testers are easy to use — just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety, personnel, and homeowners can quickly test for energized circuits in the workplace or at home. More...

    Apmat Trade

    Bhopal | More...

  • Ac High Voltage Breakdown Tester

    18,500/Set(s)

    • ATHV : -

    easy to use. Digital meter rntripping at25-50-75-100marntimer: availablernenclouser: 16 swg with & tank treatment .

    Anrgi Tech

    Vadodara | More...

  • Ac High Voltage Breakdown Tester

    • Features : Continuously variable output voltage, Selectable trip current etc.

    Hi-Pot tester HVT series offer wide range of test voltages to determine the withstand capacity of electrical insulation for the normally occurring over voltage transient’s .This series has models which can generate both AC & DC Voltages to eliminate need of two separate kits. The manual motorized controlled operation provides continuous variable output voltage. The Kits are provided with selectable tripping current More...

  • Ac Dc High Voltage Tester

    • Power Supply : 230V±10%, single phase, 50Hz

    Voltage tester Adjustable 1.0 to 30.0 mA by press to set switch and potentiometer on mA meter OR Test Voltage and leakage current programmable by external 0 to 10 V DC. Audio (Buzzer) and visual (Neon) alarms when HV is ON, Output Trips when breakdown occurs i.e. leakage exceeds than set urrent. More...

  • Post your Buy Requirement

  • Ac High Voltage Breakdown Tester

    • Dimensions : 300 X 230 X 225

    We are offering a precision engineered range of A.C High Voltage Breakdown Testers, which is widely used for checking the high voltage withstanding capacity of insulation material. Our range is extensively used in railways, electricity boards, defense, communication centres, R & D units. Moreover, our range is appreciated for offering great operational flexibility and hassle free services for years. More...

    Kb Power Care Private Limited

    Hyderabad | More...

  • Ac High Voltage Breakdown Tester

    • Highest power consumption, kVA, max : 2
    • Dimensions, mm, max : 600 × 380 × 310
    • Weight, kg, max : 40

    Ac high voltage breakdown tester, Universal insulation breakdown tester UPU-10 is designed for testing the insulation properties of the electrical equipment with an AC sinusoidal voltage of 50 Hz frequency. Due to the high output current, UPU-10 can also be used for testing the insulation braiding of large electric machinery with AC voltage. More...

    Sonel Instruments India Pvt. Ltd.

    Tamil Nadu | More...

  • Ac High Voltage Breakdown Tester

    • Power Requirements : 230 volts AC, ± 10%, 50/60 Hz
    • Open Circuit Voltage : 0 to 5 KV OR 0 to 10 KV AC. The above voltage can be continuously varied from zero to full value and is continuously monitored by Digital Panel meter.

    High voltage breakdown tester OR HV Tester is useful for measurement of breakdown (flashover) voltage of electrical components, insulation materials instruments, transformers, etc. can be used to ascertain quality of insulation material before planning their usage in electrical applications. The front panel incorporates all controls for operation of the unit. Easy to use test probes with micro-switch supplied to conn More...

    Sigma Instruments

    New Delhi | More...

  • 5kv High Voltage Tester

    12,500/Piece(s)

    • Brand : Monarch Controls
    • Power Supply : 220 - 240 V
    • Phase : Single Phase
    • Supply : AC
    • Weight : 10 Kilogram
    • Voltage : 5 Kv
    • Display Type : Analog

    Monarch Controls

    Bangalore | More...

    https://www.monarchcontrols.co.in/5kv-high-voltage-tester.htm

  • High Voltage Cable Tester

    • Voltage waveform distortion : ≤5%
    • Power supply : C50 Hz 220V ±5%
    • Loading capability : 0.1 Hz maximum 0.6µF, 0.05 Hz maximum 1.2µF, 0.02 Hz maximum 3.0µF
    • Temperature : -10+40 humidity ≤85%RH
    • Accuracy : ± (3% of full scale +0.5 KV)
    • Power Fuse : 25 A
    • Output frequency : 0.1Hz0.05Hz0.01Hz
    • Condition of use : indoor, outdoor

    We offer High Voltage Cable Tester that is fully computer controlled. It is used as a pass or fail test for cables. Small size, lightweight, large screen LCD, test report, and easy usage are the prime highlights of our High Voltage Cable Tester. Available at very feasible prices, High Voltage Cable Tester comes in different specifications to suit all the requirements of our customers.   Highlighting Features : D More...

    Myriad Industrial Solutions Llp

    Mumbai | More...

    https://www.myriadindustrialsolutions.co.in/high-voltage-cable-tester.htm

  • 100kv High Voltage Tester

    • Type : Manual / Motorised Operated
    • Output : 100KV (Max.)
    • Input : 230/415 Volts
    • Current : As required with analog KV meter, Mili Amp Meter & timer
    • Power : 220V 50Hz
    • Warranty : 1 Year

    Since, we have collaborated with numerous distributors; we can cater to buyers all over Vadodara(India) and other markets. We have hired a team of professionals who take care of the entire lot and make sure that it remains protected from air, dust, water and other damaging factors. More...

    Moon Light Electricals

    Vadodara | More...

    http://www.moonlightelectricals.co.in/100kv-high-voltage-tester-manufacturer.htm

  • Digital High Voltage Insulation Tester

    5,000/Piece(s)

    • Pin Count6 Pin : 6 Pin
    • Use : Industrial

    Buyers can stay rest assured for damage-free products from our end as we make use of quality packing material. We also fulfill different packing requirements of the clients such as customized or standard. Our company has all the necessary logistic resources and connection to make on time delivery of order(s). Product Details : Easy and Simple Operation Automatic range, indicated by different Leds Safety standard IEC More...

    Zema Automation & Controls Pvt Ltd

    South Delhi | More...

  • Dc High Voltage (3 Core Cable)

    • Stations : :  3 independent Stations
    •   :  
    • Voltage Display : : Using Analog Volt Meter
    • DC Voltage : : Up to 2 KV DC
    • Delivery Time : 3 to 4 Weeks : Packing : One Wooden Box
    • Voltage Control : : Using Dimmer
    • Cut Off : : Using Tripping System on any short circuit

    Model Number: SSI 569 TC Standard Number: IS 1554IS 649   The insulation material in a cable is used to isolate the conductor from one another and from ground, as well as provide the necessary mechanical strength. The fundamental requirement of the insulation in an electric cable is that it withstand the voltage imposed on it in the service.   Description     The insulation material in a cable is used to isolate More...

    S.s. Instruments Pvt. Ltd.

    Delhi | More...

  • High Voltage Breakdown Tester

    • capacity : 10KVA

    High Voltage Breakdown Tester, 510 KV, capacity 10KVA, Input Current 50 Amps. Complete with 2 Analog meters & tripping cureent facility at 10A, 20A, 30 A & 50 Amps., Heavy duty air cooled transformer is used.

  • Post your Buy Requirement

  • Metrix+ Voltage Tester

    300/Piece(s)

    • Color : Yellow
    • Model Number : Voltage Tester, CD-2
    • Brand Name : Metrix

    Voltage tester cd-2 non - contact detection of ac voltage 24v ac - 600v ac. For use on clout cat iii 600v

    Tradewell International

    Vadodara | More...

  • High Voltage Tester

    • Open Circuit Voltage : 0 to 30 KV OR 0 to 100 KV AC. The above voltage can be continuously varied from zero to full value and is continuously monitored by Analog/Digital Panel meter.
    • Requirements Safety : 230 volts AC, ± 10%, 50/60 Hz
    • Precautions : Voltage on test terminals. High Voltage on test jig appears only after the variac is set to zero and gradually increased. There is a trip device to trip if the current increases than the required value
    • Accuracy of Reading Power : ±2%
    • Trip settings : The tripping can be reset by a pot which can be varied as peruse requirement
    • Accuracy Of Reading : ±2%
    • Power Requirements : 230 volts AC, ± 10%, 50/60 Hz
    • Test Current : 5 mAto 50 mA OR 10 mAto 100 mA

    Enriched with vast industry experience, Starlit Electricals is engaged in manufacturing a wide range of High Voltage Tester. These are designed and developed under international industrial standards.     High voltage tester of breakdown voltage testers( B D V testers) are useful for measurement of breakdown (flashover) voltage of electrical components, insulation materials instruments, transformers, etc. to ascerta More...

    Starlit Electricals

    Pune | More...

  • Smart Non-contact Voltage Tester

    • Specifications : NT-309
    • Power : 2 x 1.5V AAA (not included)
    • Weight : 35g
    • Alarm system : Flashing LED with Beeper alarm
    • Low battery indication : Yes
    • Dimension : 156x23x26mm
    • LED light indicator : Yes
    • Categories : Hand Tools, Safety Products
    • Test Voltage range : 12V~1000VAC, 50/60Hz
    • Auto power off : 3 minutes

    Detects AC 12 to 1000 V LED illumination Voltage Level Indicator Red LED & Audible alarm   Description Smart Non-Contact Voltage Tester CAT III 1000V Safety rating. Detects AC voltage from12 to 1000 VAC without metallic contact. Compact size with pocket clip easily fits into pockets or tool pouches. Voltage level indication, red LED and audible alarm if voltage is present. Entire outer surface is non-conductive f More...

    Integrated Systems Tools

    Secunderabad | More...

  • Hipots (high Voltage Testers)

    • 230 Volts ± 10%AC, 50 Hz single Phase. : 0-5kV AC, 50Hz.
    • One knob manual control, continuously variable through torodial auto transformer. : 2-20-100 mA.
    • 3 ranges: 0.1-2mA; 0.1-20mA; 0.1-100mA : Lamps to indicate ‘HV ON’, ‘FAIL’.
    • 15 kg : 43 x 33 x 24 cm;
    • Range: 0.1-5.00 kV Display: LED digital 3 digits Resolution: 0.01 kV Accuracy: ± 3% + 4 digits : Range: 0-2mA; 2-20mA and 20-100 mA Display: LED digital 3.5 digits Resolution: 2mA range: 1uA : 20mA range: 10uA : 100mA range: 100uA Accuracy: ± 3% + 4 digits
    • 15 minutes ON / 15 minutes OFF. : 38 x 28 x 19 cm;
    • Settable : Thumbwheel switch:1-99 seconds Display: LED Digital 2 digits, countdown. Resolution: 1 second Accuracy: ± 5% : HV switched ON by remote switch. Timer does not funciton in this mode.

    Machine Feature • Digital readouts of test voltage, leakage current and time • Multi-range mA meter • Timer count-down digital display • Digital display to set trip current •‘HV ON’ and “FAIL’ indicators • Panel with legend for controls • Remote control tests via HV probe with switch • Rugged table top cabinet Safety All metal cabinet High quality double wound HV transformer Good quality compo More...

    Udeyraj Electricals Pvt Ltd

    Mumbai | More...

  • Voltage Tester

    • Operating Power : 230V 50 Hz or 110V 60 Hz
    • AC High Voltage Breakdown Tester : 5, 10, 100

    Voltage tester, Audio & Visual Alarm when HV on & off. • Test ON & OFF switch to start & interrupt Test. • Precise Trip Current Setting or Press to set switch for Leakage Current. • Inbuilt timer with Selector switch or variable by thumbwheel setting. • DC High Voltage Tester is useful for measurement of Breakdown Voltage of transformers, Electrical & Electronics instruments, Motors, Components, Control Panel More...

    Zeal Group

    Maharashtra | More...

  • High Voltage Tester

    • Time Setting : 0 to 60 Sec.
    • Voltage : 0 – 5 kV
    • Current : 0 – 5, 10, 25, 50, 100, 200mAmps

    Generate High Voltage across the Output terminal and measure the Leakage current flowing across the Earth Terminal.   • Modes: Manual, Auto, Programmable • Types: Both AC and DC Dielectric Strength Testers available • Special Models: Combination (AC+DC) High Voltage Testers available • Specially Designed probes provided for user safety • Safety factors: Zero Interlock • Speciality Transformer Type: Epoxy More...

    Scr Elektroniks

    Mumbai | More...

  • D2k-m - 1 Kv Multi Voltage 2 Go Rechargeable Battery Operated Insulation Tester

    • FEATURES : 3 ½ digit 0.65” LCD Selectable multi test voltage from 100 V to 1000V DC

    3 ½ digit 0.65” LCD. Selectable multi test voltage from 100 V to 1000V DC. AC voltage measurement upto 750V (50Hz to 500Hz) Resistance measurement upto 2000 MOhm. In two ranges of 200 MOhm and 2000MOhm on all test voltages. 1mA short circuit current for faster readings in case of capacitive load. Special low noise leads to eliminate use of seperate guard lead. More...

    Renuka Enterprises

    Dombivli | More...

  • High Voltage Tester

    • Power Supply : 230V±10%, single phase, 50Hz

    Test Voltage DC : 0 to 5000 V continuously variable by multi turn potentiometer AC : 0 to 5000 V continuously variable by multi turn potentiometer (with AC or DC test voltage selector switch) Tripping Current Adjustable 1.0 to 30.0 mA by press to set switch and potentiometer on mA meter OR Test Voltage and leakage current programmable by external 0 to 10 V DC Accuracy class of Test Voltage ± 0.1%± 2 least count Res More...

    Zeal Services

    Pune | More...

  • High Voltage Breakdown Tester

    • Weight : 12 kg
    • Voltage : 0 to 5KV AC, 0 to 30mA
    • Dimensions : 290 x 250 x 200 mm

    High Voltage Breakdown Testers are useful for checking breakdown (flash –over) voltages of motors, transformers, pumps, chokes, coils, switches, connectors, plastics, rubbers, PCB’s, insulation materials, electrical and electronic components etc.Automatic tripping facility, HT ON and HT OFF visual indications, HT ON buzzer, high voltage safely probe with push button enable feature, provide operator’s safety. HT More...

    Access Technologies

    Mumbai | More...

  • Voltage Tester

    • FEATURES : “Most accurate test set”. 1% BDV Accuracy. 0.01kV BDV resolution

    Automatic Oil Breakdown Voltage Testers are highly precise instrument, which can be used to conduct either a breakdown voltage test or do a proof (withstand) test. Usual available automatic test sets only perform the former function, but PE-AOBDV-AM can do both. More...

    M/s. Power Electronical

    Nashik | More...

  • Voltage Tester

    • Model No. : ET25

    The ET25 is an AC/DC Neon Voltage Tester. Checks voltage from 90 to 300V AC/DC. Neon indicator glows if circuit is live. Featuring a pocket clip and insulated housing. UL Listed and a one year warranty.     Features:   Checks voltage from 90 to 300V AC/DC. Neon indicator glows if circuit is live. Includes Pocket clip and insulated housing More...

    Vikas Instruments

    Kolkata | More...

  • High Voltage Breakdown Tester

    • Test Current : 3 mA to 30 mA OR 3 mA to 100 mA
    • Power Requirements : 230 volts AC, ± 10%, 50/60 Hz

    High voltage breakdown tester OR HV Tester is useful for measurement of breakdown (flashover) voltage of electrical components, insulation materials instruments, transformers, etc. can be used to ascertain quality of insulation material before planning their usage in electrical applications. The front panel incorporates all controls for operation of the unit. Easy to use test probes with micro-switch supplied to conn More...

    Sunil Associates

    New Delhi | More...

  • High Voltage Tester

    • OUTPUT: : 0-3 kV / 0 – 6 kv One Side Grounded.
    • INPUT: : 230/240 Volts 1 Ph 50 Hz AC

    3 Pin System of Live, Neutral And Earth. Ensure Proper Earthing at your end., MCB, Zero Interlock Provided, Fast acting tripping Device

    Puretronics

    Mumbai | More...

Related Products

Voltage Tester | Low Voltage Tester

Post your Buy Requirement


Is this page helpful?
Average Rating per Visitor out of 5 ( reviews)