The pitot tube produces a Differential pressure (DP) signal proportional to the square of the flow rate in accordance with Bernoulli's theorem. This signal has two components, the high pressure (HP) and the low pressure (LP).When the fluid impacts the sensor, it creates a high...
Product Applications : Monitor or control static or differential pressure when combined with differential pressure gage, switch or transmitter.
Ideal for use with our precision manometers and air velocity gauges, Dwyer® Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow...
Series 160E Pitot Tubes are widely used in the U.K. and Europe for applications demanding high accuracy when measuring the flow of air or other compatible gases. Precision crafted tip configuration allows air to pass smoothly with minimum turbulence...
Ideal for use with our precision air velocity gages, transmitters and digital test instruments, the Series 160F Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. Permanent, stamped insertion depth...
The Series 37L Accutube probe and Wet-Tap assembly provides the ability to access the pipe without service interruption. This Accutube assembly is supplied complete with two or more threaded jacking screws to allow insertion, withdrawal, and/or...
Series 40H / 42H Single-Mount Accutube These accutubes have a probe constructed of 316LSS, with a 316LSS integral 3-valve head. Both have a single-mount support and are installed through a compression fitting and thredolet (included). The 40H and...
Meriam manufactures the widest range of Averaging Pitot Tubes for gases, liquids and steam with bi-directional flow capability. Under the Accutube brand name, there are four standard models; Inline, Insertion, Flanged and Wet Tap which can provide a...
This complete assembly comprises a D.P. Transmitter for 4-20mA analog output & an averaging pitot tube assembly as a primary flow sensing elements. A most reliable & economical instrument for low measurement of Gas, Liquid & Steam application:...
Scientific Devices Averaging Pitot Tube is a primary flow measuring element based on the principal of measurement of differential pressure across the high & low pressure port. The differential pressure created due to the obstruction of Pitot Tube...
We are offering averaging pitot tubes. Averaging pitot tube is a differential pressure producer suitable for liquid, gas and steam flow measurement. It offers simple, low cost installation into pipes and ducts, and high energy savings due to its low...
STAR-MECH provides economical flow measurement products based on differential pressure principle, suitable to wide range of line size, pressure & temperature applications with service like any liquid, gas or steam. We also provide products for special applications required in...
averaging pitot tube Averaging Pitot Tube is suitable for clean liquid, gas flow measurement • Accuracy ± 2 % of actual flow rate • Repeatability of measurement ± 0.2 % • Flow rate turndown typically 4:1 • Short upstream and downstream...
ANNUBAR - DIAMOND BAR (AVERAGING PITOT TUBE) Annubar -Diamond Bar (Averaging Pitot Tube) is an energy saving device used to measure the flow of liquids, gases & steam in pipes, stacks & rectangular ducts. It provides high, long term stability with...
Spraytech Systems manufactured Averaging Pitot Tubes are another type of differential pressure flowmeters. Averaging Pitot tubes are basically used to detect flow velocity of fluids, gasses, steam, steam water and absolutely all those medias which...
Pitot tubes, Straight type pitot tube is widely used for dirty liquids .We also send pitot tubes for calibration at IIT powai on chargeable basis to find their co-efficient, Some of the places where pitot tubes are widely used are pitot tube for air...
Pitot Tube is standard air velocity meter. It consists of two concentric tubes. Inner one measures total pressure existing in the fluid stream, the outer measures static pressure only. When these tubes are connected to Manometers only the velocity...
Unique profile shape enables high flow rate turn down, Dual averaging for better accuracy, Suitable for Liquid, gas and steam flow measurement, Repeatability of measurement ± 0.1 %, Short upstream and downstream straight pipe lengths, Long term...
provides economical flow measurement products based on differential pressure principle, suitable to wide range of line size, pressure & temperature applications with service like any liquid, gas or steam. We also provide products for special applications required in the process...
Averaging Pitot Tube is suitable for clean liquid, gas flow measurement • Accuracy ± 2 % of actual flow rate • Repeatability of measurement ± 0.2 % • Flow rate turndown typically 4:1 • Short upstream and downstream straight pipe lengths...
S-Shape Pitot tube Recommended specifically for flow / velocity measurement of dirty, particulate laden air or gas streams. Typical in environmental testing, large I.D. (1/4"or more) tubing resists chocking under harsh, sooty conditions. Again tube...
We are the leading manufacturer, exporter and supplier of Averaging Pitot Tube (Annubar). P.S Instruments Averaging pitot tubes use multiple sensing ports to continually average the flow profile and generate a differential pressure that represents the mean flow rate across the...
advanced technocracy inc. is manufacturer, exporter & supplier of pitot static tube. range of experiments pitot tube is used to find the velocity of fluid flow & set consists of a fluid flow and pitot tube placement & velocity of flow across the...
The Pitot Tube is a differential pressure producer suitable for air flow measurement. It includes multiple sensing points to measure total and static pressures. It is easy to install and cost effective. It offers simple, low cost installation into...