Our Products
Leading Manufacturer, Supplier & Retailer of Centrifuges and Portable Xrf Analyzer.
E 'it equipped with a funnel, also in stainless steel, fixed on the cover for washing with water. The support that supports the basket is connected directly to the motor shaft. The electric motor is automatic, independent suspension, isolated against moisture. The starting and stopping of the rotation of the drum takes place very gently, thanks to the inverter that controls the motor, for which the content pieces are difficult to damage. On some models, there is also an electromagnetic brake which acts directly on the engine.
The machine is equipped with a potentiometer for the adjustment of the rotation speed from 0 to 1400 RPM, and the timer for the regulation of the working time.
All centrifuges are equipped with a safety device that prevents the opening of the lids during the operating phase.
| TECHNICAL DATA | IE/F | IE/400 | IE/580 | IE/700 |
| Supply | Three Phase | Three Phase | Three Phase | Three Phase |
| Power | 1.5 kW | 2.3 kW | 6 kW | 8 kW |
| basket diameter | 320 mm | 450 mm | 580 mm | 720 mm |
| Maximum load Granted | 8 Kg | 24 Kg | 80 Kg | 150 Kg |
| Dimensions Dimensions (mm) (Width-Depth-Height) |
450x680x920 | 650x800x970 | 1050x800x1250 | 1475x1130x760 |
| Weight | 110 Kg | 130 Kg | 350 Kg | 800 Kg |
It employs innovative components tested and efficient for the excitation of the samples and detection of the signal. Production of high quality and attention to detail are the basis of accuracy, speed and exceptional safety of this system that provides results on the ground as if you were in the lab.
For applications not Metal with SPECTRO xSORT it is possible to generate results as in the laboratory for all relevant elements from Al to U with a single measuring cycle that lasts only a few seconds.
For Metal applications can be analyzed up to 41 elements in just two seconds including the light elements Mg, Al and Si, which require a slightly higher measurement time.