Beltkote belt dressing is a non-staining, high tack, water resistant, synthetic lubricant cum belt conditioning treatment for improving grippage and preventing belt slippage for all flat, round and v-belts. It improves traction, prevents premature belt wearing off and eliminates belt squeaking or squealing noises. It conditions worn belts, maintains their flexibility and resilience to hardness while reducing slippage, cracking and glazing.

Applications
For use on all round, flat & v-belts in fans, pumps, machines, conveyors, air conditioners, textile machines, compressors, generators in all industrial machinery, conveyor systems, motorised equipment and vehicles.

Directions for Use
Switch off the power and turn off the equipment beforespraying this product. Protective guards or covers may have to be removed in some instances. In such cases extreme caution must be observed to prevent accidents. Replace guards after application. Spray light, even film onto stationary belts from both the sides and may be applied to pulleys also. Allow few minutes for the solvents to evaporate before restarting the equipment. Reapply occasionally to maintain full power and to optimise belt life.

Caution
Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

Benefits

• Eliminates belt squeaking or squealing noises
• Provides for better operating efficiency
• Prevents hardening, glazing and premature cracking
• Increases life and tensile strength of belts
• Reduces energy loss through effective power transfer
• Maintains flexibility and resilience of belts

Non Flammable, On Line, Electrical Contact Cleaner

CONTACLEAN-L is a non-flammable blend of high purity cleaners designed to clean electrical contacts and switches. Formulated specially for use on sophisticated equipment, this fast drying contact cleaner is non-conductive, does not leave any residue and is non-toxic. It has a very low surface tension and quickly penetrates minute crevices, cracks or pores to clean the surfaces and safely rinses off light oils, dust, fingerprints, silicones, oxides, carbon or moisture. Premium is safe to use on most plastics, metals, rubbers, elastomers & other insulating material and does not contain any CFC’s, chlorinated solvents or any ozone depleting chemicals. Formulated with non flammable, safe, CO2 propellant.

Applications For Use
Contacts, controls, relays, PCB’s, switches, motors, connectors, generators, ignition systems, terminals, sensors, circuit breakers, plugs & sockets, fuse boxes, transformers, switch gears, bearings, generators, gears, tuners, bush bars, connectors, potentiometers, solenoids, capacitors, communication equipment, oxygen systems, electrical equipment, electronic equipment, aviation equipment, industrial equipment.

Directions
For Use Spray liberally on the surface to be cleaned till the cleaning agent runs off as clear. Use extension tube for hard to reach areas. Use an abrasive or brush to clean heavy oxides or other deposits. Spray starting at the top and finishing at the bottom. Test on plastics by using on a small area before use.

Benefits

• Fast penetrating and rapidly evaporating non-flammable high purity cleaner suitable for ‘on-line’ cleaning applications
• Low surface tension and superior wetting abilities ensure effective cleaning
• Cleans equipment fast and leaves no residue or oily films
• Non staining & non corrosive
• Non conductive
• Lowers electrical resistance at contact points
• Quickly dislodges oil, grease, silicones, fingerprints, carbon, oxides and other light contaminants from precision electrical / electronic equipment
• Extends wear life of the equipment and reliability of performance
• High dielectric strength
• Prevents intermittent failure of equipment, arcing, tracking, short circuits and corona discharges
• Safe on most plastics, metals, rubbers, insulation materials
• 360° valve allows product to be sprayed in any position - even inverted

Solid lubricant paste with extremely low coefficient of friction for effective running-in and metal assembly

Applications

• As a low friction running-in, metal priming paste for all new or rebuilt mechanical equipment such as gears, sliding bearings, slide ways, joints, sleeves, splines, cams, journal bearings.
• As a press-fitting lubricant to reduce press-fitting power required and prevent misalignment, seizure, wear, distortion especially under heavy load conditions.
• For lubrication of all sliding metal surfaces to reduce wear, friction and prevent cold-welding of surfaces such as for shafts, bushes, splined shafts, pumps, valves, threaded spindles, moving screws, toothed gears, worm gears and transmission gears, lead screws, machine tool guides, pumps, flanges, anti friction bearings, ball and roller bearings, shafts, bolts and pulleys.
• As a universal assembly paste to reduce tightening torque required; for enabling easy and non-destructive disassembly of components after long operational hours under operating and temperature variations.
• As an antifriction and anti wear lubricant for heavily loaded surfaces under slow sliding speeds for preventing cold welding of sliding surfaces under heavy loads.
• As a standard anti seize compound for all threaded connections during assembly stage for maintenance free dismantling.

Benefits

• Extremely wide service temperature range of -35°C to +450°C
• Low coefficient of friction
• High pressure withstanding capacity
• Load bearing capacity exceeds the yield point of most metals
• Prevents metal-to-metal contact and offers protection from wear and friction
• Prevents seizure, scoring, galling, fretting corrosion and stick slip
• Reduces press fitting force required and prevents distortion or misalignment
• Makes assembly easier and disassembly rapid and non- destructive irrespective of operational period or conditions
• Economical to use owing to its high surface coverage capacity
• Aids running in and provides emergency lubrication during start ups

Directions for Use
Shake the can vigorously for a couple of minutes before spraying till the bearing noise from inside the container is audible. Repeat before every application. Spray onto a clean, dry and degreased surface. Only a thin film of this lubricant is required. Allow solvents to evaporate. Spray from a distance of 20-30 cms. Repeat if necessary. For cleaning the valve dip- tube after spraying, invert the can and depress the actuator button for a few short bursts till only the clear propellant comes out.

Caution
Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

General
Use in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

Disposal
All used and unused product should be disposed of in accordance with state regulations.

Handling
Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.


Limited Warranty
The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

Molybdenum Disulfide Lubricant For Extreme Pressures

MOLYWET is a suspension of micro fine molybdenum disulfide solid film lubricant, extreme pressure additives and corrosion inhibitors in a special lubricating oil carrier. It deposits a thin, non-drying film of MoS2 onto the surface to form a low friction and wear reducing shield that eliminates metal-to-metal contact and increases wear life of the equipment. MOLYWET does not contain any type of solvents, CFCs or any ozone depleting chemicals.


Benefits

• Very high lubricating effect


• Improves the extreme pressure and load carrying abilities of lubricating oils


• Reduces wear and friction


• Improves running in


• Eliminates frictional heat produced and prevents overheating


• Reduces operating temperatures and noise levels


• Increases relubrication intervals and reduces lubricant consumption


• Prevents galling, scuffing and extends wear life of equipment


• Passes through filters and does not clog them

Applications

• As a high speed, anti wear and anti friction lubricant for sliding parts in textile machinery such as Autoconer mechanisms operating under high speeds and humid


• conditions.


• Lubrication of cams, bearings, gears, pins, chains, sliding or mating parts, springs, cam followers, slides.


• For use as an additive to all types of mineral oils to enhance load bearing capacity and impart extreme pressure carrying abilities for minimising wear and excessive friction, for eliminating metal to metal contact, welding and seizure.

Directions
for Use Shake the can vigorously for a couple of minutes before spraying. Repeat before every application. Spray onto a clean, dry and degreased surface in thin light coats. Spray using extension tube for pin-point application.


Caution
Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

Omnilube is a fast acting industrial grade lubricant, rust Omnilube and corrosion inhibitor. It forms a clear thin non- drying lubricating film that penetrates deep into the minutest crevices to displace trapped moisture and leaves behind a protective film to seal out further moisture and corrosion. Its unique low surface tension formula rapidly attacks rust to free seized or frozen components. It is non-conductive, nonstaining and offers complete protection to metal surfaces indoors as a medium term corrosion inhibitor for protection against corrosion and moisture penetration for up to 12 months under normal storage conditions.Omnilube does not contain any silicones, ozone depleting chemicals, CFC’s or harmful chlorinated solvents and is safe for use on around all metals, plastics, rubbers and other industrial finishes.
   

• Benefits
• Multi functional formula lubricates all sliding and moving parts with a long lasting thin oily lubricating film
• Rapidly penetrates minute cracks and pores to displace trapped moisture
• Penetrates deeply through rust to loosen scale and corroded or frozen parts
• Leaves a thin, long lasting film to prevent formation of rust or corrosion
• Cleans & removes oils, greases and other light contaminants
• Provides greaseless, non staining, silicone free lubrication and protection
• Contains safe non flammable CO2 propellant
• 360° Valve allows product to be sprayed in any position- even inverted

Applications

• A product as versatile as this has hundreds of multipurpose uses in all types of industrial, marine, aviation, electrical / electronic, electromagnetically, commercial and domestic applications.
• Lubrication: Thin, non-drying protective oily film effectively lubricates moving parts as tuners, micro switches, power tools, automation equipment, locks,
• vending machines.
• Rust Penetration: For rapidly loosening tight, rusted or frozen components with high penetrating action.
• Moisture Displacement: Rapidly dries wet ignitions & removes trapped moisture from electrical / electronic systems.
• Corrosion Protection: For dies, jigs, tools, relays, connectors, switches, instruments, finished welds, casings, shafts, motors, freshly machined surfaces.
• Cleaner: For dissolving and removing grease, oil and other light contaminants.
• Prevention: Of entry of further moisture.

Directions For Use - Bulk
Apply by means of brush or by dipping component into the fluid. Allow solvents to penetrate and free rusted parts. Period for penetration may vary depending upon the length of time the product has been rusted for and in some cases may even take up to hours. Use an absorbent rag or a brush to remove dirt, rust, scales & dust. For moisture displacement, apply onto surfaces till only clear product (amber-pale straw) comes out and the emulsified residue is totally cleared. Never use on energized circuits or hot surfaces. Clean and dry surfaces completely before applying power. For metal protection, dip components or apply by brush and do not wipe off protective film from the surface.


Directions For Use - Aerosol
For rust penetration, spray liberally onto the surface. Allow solvents to penetrate and free rusted parts. Period for penetration may vary depending upon the length of time the product has been rusted for and in some cases may even take up to hours. Use an absorbent rag or a brush to remove dirt, rust, scales & dust. For lubrication, spray lightly and evenly over surface area to be lubricated. For moisture displacement, spray until clear product comes out and emulsified residue is totally clear. For metal protection, spray liberally and do not wipe off protective film from the surface.


Caution
Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

Synthetic Lubricant & Cleaner for Precision Textile Equipment

YARNLUBE spray is a non-staining synthetic lubricant cum cleaner for textile machinery parts such as scissors and cutting mechanisms of knotters and splicers in weaving, winding, spinning, sewing and knitting machinery where mechanisms are intricate and delicate and operating speeds are high.

It is useful for cleaning dirt, dust, fluff and provides a non-staining, anti static mild lubricating film for reducing wear and friction.

YARNLUBE spray does not contain any CFCs or harmful ozone depleting substances.


Benefits

• Clear & non-staining ultra thin film
• Cleans moisture, dirt, dust, fluff
• Penetrates metal crevices
• Provides mild lubrication
• Protects from corrosion
• No carbon residues

Directions for Use
Spray evenly thin light coats on clean and dry surfaces. Allow the cleaning solvents to evaporate. Spray from a distance of 20-30 cms. Use extension tube for pinpoint application.


Caution
Flammable contents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.


General
Use in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).


Disposal
All used and unused product should be disposed of in accordance with state regulations.

Handling
Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.


Limited Warranty
The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

Cold Galvanizing Coating With Brilliant Shiny Finish To That Of Hot Dip Galvanizing

ZINKOTE is a high performance zinc and aluminium coating designed to provide true galvanic corrosion protection to metals and stop rusting.

It air dries fast on application to leave a film that is highly resistant to heat, water, corrosion and saline environments. It bonds to bare metals without requiring any baking and offers maximum protection against corrosion under severe conditions. It does not contain any chlorinated solvents, CFCs or ozone depleting chemicals


Benefits

• Repairs damaged hot dip galvanised surfaces
• Fast air-drying and offers protection of hot dip Galvanizing
• Brilliant metallic finish to that of hot dip Galvanizing
• Highly abrasion resistant film does not peel off
• Offers long-term protection
• Prevents rust & corrosion

Applications
Structural steels, transmission towers, welding seams, bridges, relay towers, piping & ducting, offshore equipment, nuclear & power plants, antennas, metal fabrication, industrial maintenance, touch up to damaged galvanised coatings.


Directions
For Use Clean and degreased the surface prior to application. Remove all rust and loose scales by wire brush. Shake can well for a couple of minutes till bearing noise from inside the can is audible. Repeat the same before every application. Spray light, even coats with sweeping action of the hand onto completely dry surface. Allow solvents to completely evaporate before re- application. Optimum desired film thickness is about 2-3 mils. Drying time to touch is about 10-15 minutes, to handle is about one hour and for complete cure is about 24 hours. Flush away paint products or product residues in the dip tube of the valve by cleaning it. Cleaning of the valve should be performed after spraying is finished, by inverting the can and pressing the actuator button in short bursts till only the propellant comes out. If required, to prevent clogging, remove the actuator button and clean the button orifice with a thin, fine wire.


Caution
Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

JETEX ABC-50 CLEANER is a multipurpose, non-abrasive, aqueous, biodegradable, cleaner / degreaser which can be further diluted with water to meet various cleaning applications.

It aggressively attacks and removes grease, oil, dirt, sludge and other light contaminants and allows to be rinsed off with water.

It does not contain any ozone depleting chemicals or chlorinated solvents and equals performance of solvent-based cleaners.


Applications
Suitable for mechanical components washing and degreasing applications.


Benefits

• Removes oil, grease, dirt & sludge deposits
• Biodegradable & leaves no residue
• Multipurpose foaming formula
• Nonflammable & non-abrasive
• Equals performance of solvent based degreasers

Dilution levels will vary subject to the type of surface, contaminant and contamination level of the surface being cleaned. Start at higher concentrations of JETEX ABC-50 CLEANER in water and work up to lower concentrations till satisfactory performance and cleaning is obtained.


Directions for Use
Dilute the product by adding water to it. Stir mechanically with a stirrer if required. Apply product by brush, swab or by dipping components into the cleaner solution. Allow time to penetrate contaminants and then rinse off with water. For heavily soiled parts, use a wire brush or an abrasive to remove excesses. Always clean the surface thoroughly with water to remove any residues left behind and never allow to dry on any surface. Test for compatibility on soft metals and plastic surfaces by checking on a small area.


General
Use in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).


Disposal
All used and unused product should be disposed of in accordance with state regulations.


Handling
Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.


Limited Warranty
The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

Fast evaporating, residue free, cleaner / degreaser for fast removal of contaminants from metal surfaces; free of chlorinated solvents

JETEX HDG-86 is a non chlorinated, fast drying cleaner / degreaser for mechanical cleaning applications as a alternative for chlorinated solvents like CTC, 1, 1, 1 Trichloroethane. Safety standards from both, worker health as well as environmental, prohibit the use of chlorinated solvents like CTC or 1, 1, 1 TCE.

JETEX HDG-86 rapidly penetrates through grease, oil, dirt, dust and other contaminants and cleans equipment fast. It has a pleasant citrus odor, fast evaporation rate and does not leave any residue. JETEX HDG-86 cleans metal surfaces effectively due its superior penetrating and wetting ability.

It does not contain any CFC’s, chlorinated solvents or ozone depleting chemicals and is suitable for cleaning / degreasing of all metal surfaces and equipment only.


Applications
For heavy duty cleaning / degreasing applications of all mechanical equipment as brakes, chains, gears, bearings, clutches, generators, hand tools, molds, dies, slides, pumps, forklifts, valves, nuts & bolts, pipes, power tools. Safe for use on all metal surfaces, glass, most plastics and ceramics.


Benefits

• Removes grease, oil, dirt, dust, sludge
• Non corrosive, non conductive & non staining
• Removes tar, adhesives and other tough contaminants
• Leaves no residue
• Safe on metals, most plastics, glass and ceramics
• Non chlorinated formulation
• Fast penetrating and superior wetting action
• 360° valve allows spraying in any position-even inverted

Directions for Use (Bulk)
Never use on energized equipment. Do not dilute with any other cleaning agent, water or mix with any solvent. Apply onto soiled surface and continue dipping / applying / spraying liberally until only solvent runs out clearly and contaminants have been washed off. To remove heavy carbon or oxides, use a brush. Allow solvents to dry off the components before reactivating. To enhance drying time, apply forced air or wipe dry with an absorbent cloth after applying. Use only when completely dry. Test on plastics prior to use for compatibility.


Directions for Use (Aerosol)
Never use on energized equipment. Spray using pin-point extension tube onto soiled surface and continue spraying liberally until only solvent runs out clearly and contaminants have been washed off. To remove heavy carbon or oxides, use a brush. Spray starting at the top of the surface and slowly working towards the bottom. Allow solvents to dry off the components before reactivating. To enhance drying time, apply forced air or wipe dry with an absorbent cloth after applying. Use only when completely dry. Test on plastics prior to use for compatibility.


Caution: Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.


General
Use in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).


Disposal
All used and unused product should be disposed of in accordance with state regulations.


Handling
Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.


Limited Warranty
The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

High temperature copper based anti seize thread compound
Solid lubricant paste for all threaded & bolted connections; lead and nickel free

Applications

• Highly recommended for use on all threaded and flanged connections operating at very high temperatures and corrosive conditions to enable faster and rapid non destructive disassembly after long operational periods as in autoclaves, furnaces, boilers, reactors, turbines, extrusion mandrels, compressors, heat exchangers, gas generators, plastic moulding machines, chemical and steel plant equipment.

• Heavy duty thread compound for studs, nuts, bolts, valve stems, spindles, exhaust pipes, cylinder and engine head screws, steam lines exposed to high temperatures, water and corrosives to provide complete protection from seizure and corrosion and which also need to be reopened or re tightened after assembly and initial operational period.

Benefits

• Extremely wide service temperature range of -20°C to +1100°C
• Makes disassembly easy and non-destructive even after long operational periods at high temperatures and adverse working environments
• High load withstanding capacity
• Creates an effective matrix between mating surfaces to prevent metal-to-metal contact
• Protects surface from wear and friction
• Good corrosion protection
• Water resistant
• Ensures consistent tightening of threaded connections and provides an optimum balance between torque required to tighten and pretension
• Prevents bolt breaking, sintering, fusion, seizure, thread striping and distortion of threads
• Meets requirements of MIL-A-907E

Directions for Use
Shake the can vigorously for a couple of minutes before spraying till the bearing noise from inside the container is audible. Repeat before every application. Spray onto a clean, dry and degreased surface. Only a thin film of this lubricant is required. Allow solvents to evaporate. Spray from a distance of 20-30 cms. Repeat if necessary. For cleaning the valve dip- tube after spraying, invert the can and depress the actuator button for a few short bursts till only the clear propellant comes out.


Caution:- Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.


General
Use in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).


Disposal
All used and unused product should be disposed of in accordance with state regulations.


Handling
Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.


Limited Warranty
The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

High Gloss Fast Drying Flexible Acrylic Conformal Coating

ELECTOCOAT is a fast air-drying, lightweight, clear, tough and flexible acrylic coating designed primarily to protect printed circuit boards and electrical / electronic equipment against high voltage arcing, corona shorts, corrosion, ingress of moisture and fungus. It resists rust, tarnish, corrosion, moisture and has excellent waterproofing / weatherproofing abilities. ELECTOCOAT is highly abrasion & scratch resistant and protects electronic equipment completely due to its high dielectric strength. It does not contain any harmful chlorinated solvents, CFCs or ozone depleting chemicals.


Benefits

• Protects against rust, corrosion, tarnish, oxidation, moisture and weathering influences
• Provides a high-gloss, clear protective finish that remains transparent and does not fade or become yellow Provides a protective and insulating film that shields printed circuit boards from electrical leakage and short circuits
• Prevents sparking and corona discharges
• Non-conductive and has good dielectric properties
• Excellent resistance to weak acids & alkalis, water, oils and chemical fumes
• Easily solderable and very convenient for onsite repair jobs
• Conforms to requirements of specifications MIL-I-46058C

Applications
Insulation and protection of all electrical, electronic and high- tech equipment of: general electronics, printed circuit boards, thick film circuits, high voltage transformers, electrical motor coils, cables, wires; for moisture proofing and corrosion prevention of any industrial, automotive, aviation, marine and military electrical & electronic hardware.


Directions For Use - Bulk
Mask and protect areas not to be coated. Apply steady even strokes by means of brush. Component to be coated can also be dipped into the coating. For best results, two light coats are better than one heavy coat. Coating becomes dry to touch in about 15-20 minutes. Complete cure takes place in about 24 hours depending upon the relative humidity.


Directions For Use - Aerosol
Shake can vigorously for at least one minute after bearing noise from inside the can is audible. Mask and protect areas not to be coated. Hold can 12-15 inches away from surface to be coated and spray in steady, even strokes. For best results, two light coats are better than one heavy coat. Coating becomes dry to touch in about 15-20 minutes. Complete cure takes place in about 24 hours depending upon the relative humidity. Clean the valve by inverting the can and spraying a few short bursts till only the clear propellant comes out. Clean the actuator button orifice by means of a thin, fine wire.


Caution:- Contains flammable propellant and solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

MoS2 and solid lubricants based air-drying anti friction coating

Benefits

n
• Extremely wide service temperature range of -180°C to +450°C
n
• Low coefficient of friction, high surface load and pressure withstanding capacity
n
• High and low temperature performance
n
• Protects surfaces from wear, galling and seizure
n
• Oil, grease and solvent resistant
n
• Prevents stick-slip and fretting corrosion
n
• Provides clean dry film lubrication and does not accumulate dirt or abrasives
n
• Offers surface protection from corrosion
n
• Lubricates under adverse operating environments such as in vacuum or near radiation
n
• Provides maintenance free permanent lubrication where oil or grease contamination cannot be tolerated
n
• Excellent lubricity and highly abrasion resistant
n
• Increases service life of equipment
n

Applications

n
• As a dry film lubricant for components exposed to abrasive or dusty environments as threaded connections, pins, levers, pivots, splines, bolts, chains.
n
• As a metal pretreatment lubricant prior to assembly for effective running in to reduce wear, friction and eliminate metal to metal contact and seizure.
n
• As a lubricant for components exposed to critical environmental conditions as vacuums, radiation, high temperatures, humidity.
n
• As a heavy duty, high temperature thread compound to prevent seizure and corrosion and facilitate easy assembly and non-destructive disassembly.
n
• As an anti friction coating for metal cutting tools as millers, reamers, taps, drills, gear cutters, punches, dies to prevent sticking, binding and metal build up; increase life of tools, production quality and efficiency.
n
• As an extreme pressure lubricant for heavily loaded or stressed surfaces to prevent wear, friction, galling, scuffing, seizure and fretting as for press fits, pins, levers, pivots, bearings, gears, splines, journals, linkages.
n

Directions for Use
Shake the can vigorously for a couple of minutes before spraying till the bearing noise from inside the container is audible. Repeat before every application. Spray onto a clean, dry and degreased surface. Only a thin film of this lubricant is required. Allow solvents to evaporate. Spray from a distance of 20-30 cms. Repeat if necessary. Excess lubricant may fall off during assembly. For cleaning the valve dip-tube after spraying, invert the can and depress the actuator button for a few short bursts till only the clear propellant comes out.


Caution:- Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

JETEX CompressorOil 68 SPis a high performance compressor oil developed for screw compressors. It provides sufficient lubrication under a wide operating
temperature and load conditions. The formulation provides superior thermal & oxidation stability, good demulsibility and rust protection.


Application

n
• All types of screw compressors where a mineral oil is recommended.
n

Benefits

n
• Excellent oxidation and thermal stability
n
• Anti-wear additives provide protection against component wear & tear.
n
• Protection against rust and corrosion
n
• Longer component life, Reduced equipment downtime, Lower maintenance costs
n

Performance standards
Performance exceeds the requirements of the following standards,

n
• Denison Hydraulics HF-0 DIN 51524 Part II
n
• CETOP RP91H
n

SKO – 22 Oil is synthetic knitting oil (Revolutionary & Certified Lubricant), specially designed and formulated for the lubrication of sinkers & needles of knitting machine to provide long life and extremely low friction performance. It is non-staining synthetic oil which does not leave any carbonaceous deposits, and due to its excellent lubricity, it reduces the power consumption & operating temperature of a machine. Its mild antistatic and antirust properties make it suitable for use in high speed knitting, texturizing and winding machinery employed in Textile and Polymer industries.

It is fully scourable and does not leave any stains whatsoever after the fabric is washed. It does not damage the paints or rubber and plastic parts used in knitting machines or affect the electrical controls of the machine. It is very much suitable for any brand or make such as (Terrot, Fukuhara, Orizio, Monarch, Camber, Vanguard, Mayer & Cie, Year China, Smart, etc.) And any (Circular & Linear) types of knitting machines.


Exclusive Features :

• It is non stainy in nature.
• It does not form any gummy deposits or formation of carbonaceous residues.
• Because of an excellent lubricity it reduces friction and wear and tear of needles. It also reduces power consumption & temperature of machine.
• Helps in high-speed operation with higher productivity.
• Completely scourable and compatible with other parts (paints, rubber, plastic) of the machine.
• Guaranteed & Proven product because it’s true values required for needle lubrication.

a range of high performance specialty industrial lubricants for all types of industries.

Copper and solid lubricants paste for all nuts, bolts, screws, threaded connections; lead and nickel free

Applications
Anti seize, anti rust & effective lubricant for protection of parts operating under severe corrosion, temperatures and steam, humidity, water or chemical attack as: studs, nuts, bolts, screws, pipes, keys, u-bolts, splines, taps, slides, seals, slippers, joints, plugs, gears, chains, exhausts sprockets, valve stems, manifolds, couplings, adapters, bearings, gaskets, packings, drills, bushings, king pins, spindles. For use on all threaded and flanged connections operating at very high temperatures to prevent seizure, corrosion and atmospheric influences as in: cat crackers, autoclaves, cylinder heads, furnace bolts, generators, fuel feed nozzles, boilers, reactors, ladles in steel plant, turbines, burners, extrusion mandrels, ovens, soot blowers, blast furnaces, pumps, engines, steel plant equipment, compressors, heat exchangers.

For use in oil rigs, refineries, petrochemical, chemical & fertiliser plants as a heavy duty thread assembly compound, pipe sealant and anti corrosion compound for components exposed to very high temperatures, steam, hot, cold, brine water, humidity, corrosive or chemical environments to provide protection, effective lubrication, sealing and corrosion protection and prevent seizure, jamming and rusting even after long operational hours under very severe conditions.

For use in rotary kilns in cement plants as a high temperature, extreme pressure, low friction lubricant for effective lubrication of live ring supports.


Benefits

• Extremely wide service temperature range from -18°C to +1100°C.
• Eliminates metal-to-metal contact and maintains lubrication qualities under wide variations of temperature, pressures and adverse operating conditions.
• Prevents fretting, galling, tightening, welding of mating surfaces.
• Protects against galvanic corrosion between dissimilar metals in contact.
• Enables faster and rapid assembly and non-destructive disassembly even after long term exposure to high temperatures and corrosive atmospheres.
• Prevents stripping and cold-welding of threads and avoids sintering, fusion, thread stripping, bolt breaking and distortion.
• Low friction properties reduce wear and friction to increase life of the equipment and avoid costly replacements.
• Highly resistant to hot and cold water, steam, humidity, brine water, mild acids and alkalis, corrosion, aging and oxidation.

Methods of Application
Clean and degrease the surface prior to application. Remove all coatings, greases, dirt, grime, loose rust and scales by means of a fine thin wire. Apply METAPLAT liberally by means of a stiff wire brush on to the surface and evenly right down to the roots of threads. Excessive compound provides a good sealing effect and need not be removed. Do not mix with conventional oils and greases.

Note METAPLAT is not for use as a lubricant for high-speed bearings. However it may be used for lubrication of heavily loaded bearings under very slow speeds.

Dielectric, non-melting silicone grease like compound for electrical parts insulation and moisture protection

Applications

n
• As a moisture proof seal and protective barrier coating on high tension electrical connections of all electronic, electrical, industrial, marine, aircraft, automotive equipment for providing greater resistance to tracking and effects of corona discharges
n
• As a dielectric seal cum lubricant for switches, cables, cable connectors, high voltage insulators, battery terminals, plastic and rubber parts, bushings, electrical insulation, spark plugs, disconnection junctions, ignition systems to prevent formation of a conducting film of water, eliminate risk of flash overs, minimise electrical leakage and prevent ingress of moisture
n
• For all electrical fittings exposed to marine environments to protect from salt-water corrosion, oxidation, moisture penetration, reduce maintenance and increase wear life of equipment As a protective coating on insulators and bushings in chemical plants to protect them from chemical fumes, vapours and gases
n
• As an assembly lubricant for various metal-plastic and metal- rubber pairings
n
• On to surfaces of ceramics, metals, insulating materials to impart high surface resistivity
n

Benefits

n
• Wide service temperature range from -50C to + 200C
n
• Moisture resistant and excellent water repellency qualities prevent formation of conducting water film
n
• High degree of resistance to salt spray, humidity and corrosives
n
• High dielectric strength
n
• Chemically inert
n
• Very low volatility
n
• Very good thermal and oxidation stability
n
• Consistency is largely independent of temperature and maintains its grease like consistency at high temperatures
n
• Nontoxic, non volatile, non melting and odourless
n
• Compatible with plastic, rubber and metal pairings
n
• Very good adhesion on all metals, glass, plastic, ceramic, rubber substrates
n

Method of Application
Apply by means of hand, brush or putty knife. Can also be dispersed in solvents like mineral spirits, xylene or methyl ethyl ketone for thinning the consistency and making it easier to apply by brushing, dipping or spraying. Do not mix with other oils or grease.


Directions For Use (Aerosol only)
Shut off equipment and turn off power before spraying. Spray thin, light and even coats onto clean, dry and moisture free surfaces to a thickness of about 0.4-0.5 mm. For optimum use, clean surface dry from moisture. Allow few minutes for solvent to completely evaporate before resuming operations. Removal of the film can be done by normal degreasing solvents.


Caution (Aerosol only) Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

Silicone grease like compound for use as a release and separating agent

Applications

n
• Release agent for epoxy, polystyrene, PVC, polyesters and other plastics
n
• Release agent on polished dies for vinyl sheet embossing to improve surface finish of vinyl processed materials
n
• Release agent for plastic extruders and processing equipment
n
• Break in treatment for bladders on tyre presses
n
• Mould release agent for foundry shell and core molds
n
• Rubber lubricant and preservative to maintain its resilience to age hardening and stress cracking
n
• Release agent for adhesives and glues in plywood and board manufacturing industry for acting as an anti stick agent and preventing contact and adhesion of adhesive
n
• glues to machine components
n
• In metal casting applications during shell molding process for breaking in new casts, zinc molding plates smoother operations, lesser rejection, increasing life of the dies, improving surface finish and outlook of components and chill casting of brass
n

Benefits

n
• Wide service temperature range from -40C to +204C
n
• Very low volatility
n
• Very good thermal and oxidation stability and minimises build up on mold
n
• Nontoxic, non melting and odourless
n
• Chemically inert and does not react with plastics and metals
n
• Suitable for high temperature moulding operations
n
• Excellent release properties increases production output while minimising rejection
n
• Resistant to water
n
• Does not dry out
n

Method of Application
Apply by means of hand, brush or putty knife. Can also be dispersed in solvents like mineral spirits, xylene or methyl ethyl ketone for thinning the consistency and making it easier to apply by brushing, dipping or spraying. Do not mix with other oils or grease.

Beltkote belt dressing is a non-staining, high tack, water resistant, synthetic lubricant cum belt conditioning treatment for improving grippage and preventing belt slippage for all flat, round and v-belts. It improves traction, prevents premature belt wearing off and eliminates belt squeaking or squealing noises. It conditions worn belts, maintains their flexibility and resilience to hardness while reducing slippage, cracking and glazing.

ApplicationsFor use on all round, flat & v-belts in fans, pumps, machines, conveyors, air conditioners, textile machines, compressors, generators in all industrial machinery, conveyor systems, motorised equipment and vehicles.

Directions for UseSwitch off the power and turn off the equipment beforespraying this product. Protective guards or covers may have to be removed in some instances. In such cases extreme caution must be observed to prevent accidents. Replace guards after application. Spray light, even film onto stationary belts from both the sides and may be applied to pulleys also. Allow few minutes for the solvents to evaporate before restarting the equipment. Reapply occasionally to maintain full power and to optimise belt life.

Caution Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

Benefits

• Eliminates belt squeaking or squealing noises
• Provides for better operating efficiency
• Prevents hardening, glazing and premature cracking
• Increases life and tensile strength of belts
• Reduces energy loss through effective power transfer
• Maintains flexibility and resilience of belts

Non Flammable, On Line, Electrical Contact Cleaner

CONTACLEAN-L is a non-flammable blend of high purity cleaners designed to clean electrical contacts and switches. Formulated specially for use on sophisticated equipment, this fast drying contact cleaner is non-conductive, does not leave any residue and is non-toxic. It has a very low surface tension and quickly penetrates minute crevices, cracks or pores to clean the surfaces and safely rinses off light oils, dust, fingerprints, silicones, oxides, carbon or moisture. Premium is safe to use on most plastics, metals, rubbers, elastomers & other insulating material and does not contain any CFC’s, chlorinated solvents or any ozone depleting chemicals. Formulated with non flammable, safe, CO2 propellant.

Applications For UseContacts, controls, relays, PCB’s, switches, motors, connectors, generators, ignition systems, terminals, sensors, circuit breakers, plugs & sockets, fuse boxes, transformers, switch gears, bearings, generators, gears, tuners, bush bars, connectors, potentiometers, solenoids, capacitors, communication equipment, oxygen systems, electrical equipment, electronic equipment, aviation equipment, industrial equipment.

Directions For Use Spray liberally on the surface to be cleaned till the cleaning agent runs off as clear. Use extension tube for hard to reach areas. Use an abrasive or brush to clean heavy oxides or other deposits. Spray starting at the top and finishing at the bottom. Test on plastics by using on a small area before use.

Benefits

• Fast penetrating and rapidly evaporating non-flammable high purity cleaner suitable for ‘on-line’ cleaning applications
• Low surface tension and superior wetting abilities ensure effective cleaning
• Cleans equipment fast and leaves no residue or oily films
• Non staining & non corrosive
• Non conductive
• Lowers electrical resistance at contact points
• Quickly dislodges oil, grease, silicones, fingerprints, carbon, oxides and other light contaminants from precision electrical / electronic equipment
• Extends wear life of the equipment and reliability of performance
• High dielectric strength
• Prevents intermittent failure of equipment, arcing, tracking, short circuits and corona discharges
• Safe on most plastics, metals, rubbers, insulation materials
• 360° valve allows product to be sprayed in any position - even inverted

Solid lubricant paste with extremely low coefficient of friction for effective running-in and metal assembly

Applications

• As a low friction running-in, metal priming paste for all new or rebuilt mechanical equipment such as gears, sliding bearings, slide ways, joints, sleeves, splines, cams, journal bearings.
• As a press-fitting lubricant to reduce press-fitting power required and prevent misalignment, seizure, wear, distortion especially under heavy load conditions.
• For lubrication of all sliding metal surfaces to reduce wear, friction and prevent cold-welding of surfaces such as for shafts, bushes, splined shafts, pumps, valves, threaded spindles, moving screws, toothed gears, worm gears and transmission gears, lead screws, machine tool guides, pumps, flanges, anti friction bearings, ball and roller bearings, shafts, bolts and pulleys.
• As a universal assembly paste to reduce tightening torque required; for enabling easy and non-destructive disassembly of components after long operational hours under operating and temperature variations.
• As an antifriction and anti wear lubricant for heavily loaded surfaces under slow sliding speeds for preventing cold welding of sliding surfaces under heavy loads.
• As a standard anti seize compound for all threaded connections during assembly stage for maintenance free dismantling.

Benefits

• Extremely wide service temperature range of -35°C to +450°C
• Low coefficient of friction
• High pressure withstanding capacity
• Load bearing capacity exceeds the yield point of most metals
• Prevents metal-to-metal contact and offers protection from wear and friction
• Prevents seizure, scoring, galling, fretting corrosion and stick slip
• Reduces press fitting force required and prevents distortion or misalignment
• Makes assembly easier and disassembly rapid and non- destructive irrespective of operational period or conditions
• Economical to use owing to its high surface coverage capacity
• Aids running in and provides emergency lubrication during start ups

Directions for UseShake the can vigorously for a couple of minutes before spraying till the bearing noise from inside the container is audible. Repeat before every application. Spray onto a clean, dry and degreased surface. Only a thin film of this lubricant is required. Allow solvents to evaporate. Spray from a distance of 20-30 cms. Repeat if necessary. For cleaning the valve dip- tube after spraying, invert the can and depress the actuator button for a few short bursts till only the clear propellant comes out.

Caution Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

GeneralUse in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).

Disposal All used and unused product should be disposed of in accordance with state regulations.

HandlingRead instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.


Limited WarrantyThe information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

Molybdenum Disulfide Lubricant For Extreme Pressures
MOLYWET is a suspension of micro fine molybdenum disulfide solid film lubricant, extreme pressure additives and corrosion inhibitors in a special lubricating oil carrier. It deposits a thin, non-drying film of MoS2 onto the surface to form a low friction and wear reducing shield that eliminates metal-to-metal contact and increases wear life of the equipment. MOLYWET does not contain any type of solvents, CFCs or any ozone depleting chemicals.


Benefits

• Very high lubricating effect
• Improves the extreme pressure and load carrying abilities of lubricating oils
• Reduces wear and friction
• Improves running in
• Eliminates frictional heat produced and prevents overheating
• Reduces operating temperatures and noise levels
• Increases relubrication intervals and reduces lubricant consumption
• Prevents galling, scuffing and extends wear life of equipment
• Passes through filters and does not clog them

Applications

• As a high speed, anti wear and anti friction lubricant for sliding parts in textile machinery such as Autoconer mechanisms operating under high speeds and humid
• conditions.
• Lubrication of cams, bearings, gears, pins, chains, sliding or mating parts, springs, cam followers, slides.
• For use as an additive to all types of mineral oils to enhance load bearing capacity and impart extreme pressure carrying abilities for minimising wear and excessive friction, for eliminating metal to metal contact, welding and seizure.

Directionsfor Use Shake the can vigorously for a couple of minutes before spraying. Repeat before every application. Spray onto a clean, dry and degreased surface in thin light coats. Spray using extension tube for pin-point application.


Caution Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

Omnilube is a fast acting industrial grade lubricant, rust Omnilube and corrosion inhibitor. It forms a clear thin non- drying lubricating film that penetrates deep into the minutest crevices to displace trapped moisture and leaves behind a protective film to seal out further moisture and corrosion. Its unique low surface tension formula rapidly attacks rust to free seized or frozen components. It is non-conductive, nonstaining and offers complete protection to metal surfaces indoors as a medium term corrosion inhibitor for protection against corrosion and moisture penetration for up to 12 months under normal storage conditions.Omnilube does not contain any silicones, ozone depleting chemicals, CFC’s or harmful chlorinated solvents and is safe for use on around all metals, plastics, rubbers and other industrial finishes.   

• Benefits
• Multi functional formula lubricates all sliding and moving parts with a long lasting thin oily lubricating film
• Rapidly penetrates minute cracks and pores to displace trapped moisture
• Penetrates deeply through rust to loosen scale and corroded or frozen parts
• Leaves a thin, long lasting film to prevent formation of rust or corrosion
• Cleans & removes oils, greases and other light contaminants
• Provides greaseless, non staining, silicone free lubrication and protection
• Contains safe non flammable CO2 propellant
• 360° Valve allows product to be sprayed in any position- even inverted

Applications

• A product as versatile as this has hundreds of multipurpose uses in all types of industrial, marine, aviation, electrical / electronic, electromagnetically, commercial and domestic applications.
• Lubrication: Thin, non-drying protective oily film effectively lubricates moving parts as tuners, micro switches, power tools, automation equipment, locks,
• vending machines.
• Rust Penetration: For rapidly loosening tight, rusted or frozen components with high penetrating action.
• Moisture Displacement: Rapidly dries wet ignitions & removes trapped moisture from electrical / electronic systems.
• Corrosion Protection: For dies, jigs, tools, relays, connectors, switches, instruments, finished welds, casings, shafts, motors, freshly machined surfaces.
• Cleaner: For dissolving and removing grease, oil and other light contaminants.
• Prevention: Of entry of further moisture.

Directions For Use - BulkApply by means of brush or by dipping component into the fluid. Allow solvents to penetrate and free rusted parts. Period for penetration may vary depending upon the length of time the product has been rusted for and in some cases may even take up to hours. Use an absorbent rag or a brush to remove dirt, rust, scales & dust. For moisture displacement, apply onto surfaces till only clear product (amber-pale straw) comes out and the emulsified residue is totally cleared. Never use on energized circuits or hot surfaces. Clean and dry surfaces completely before applying power. For metal protection, dip components or apply by brush and do not wipe off protective film from the surface.


Directions For Use - Aerosol For rust penetration, spray liberally onto the surface. Allow solvents to penetrate and free rusted parts. Period for penetration may vary depending upon the length of time the product has been rusted for and in some cases may even take up to hours. Use an absorbent rag or a brush to remove dirt, rust, scales & dust. For lubrication, spray lightly and evenly over surface area to be lubricated. For moisture displacement, spray until clear product comes out and emulsified residue is totally clear. For metal protection, spray liberally and do not wipe off protective film from the surface.


CautionContains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

Synthetic Lubricant & Cleaner for Precision Textile Equipment
YARNLUBE spray is a non-staining synthetic lubricant cum cleaner for textile machinery parts such as scissors and cutting mechanisms of knotters and splicers in weaving, winding, spinning, sewing and knitting machinery where mechanisms are intricate and delicate and operating speeds are high.
It is useful for cleaning dirt, dust, fluff and provides a non-staining, anti static mild lubricating film for reducing wear and friction.
YARNLUBE spray does not contain any CFCs or harmful ozone depleting substances.


Benefits

• Clear & non-staining ultra thin film
• Cleans moisture, dirt, dust, fluff
• Penetrates metal crevices
• Provides mild lubrication
• Protects from corrosion
• No carbon residues

Directions for UseSpray evenly thin light coats on clean and dry surfaces. Allow the cleaning solvents to evaporate. Spray from a distance of 20-30 cms. Use extension tube for pinpoint application.


CautionFlammable contents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.


General Use in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).


DisposalAll used and unused product should be disposed of in accordance with state regulations.

Handling Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.


Limited WarrantyThe information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

Cold Galvanizing Coating With Brilliant Shiny Finish To That Of Hot Dip Galvanizing
ZINKOTE is a high performance zinc and aluminium coating designed to provide true galvanic corrosion protection to metals and stop rusting.
It air dries fast on application to leave a film that is highly resistant to heat, water, corrosion and saline environments. It bonds to bare metals without requiring any baking and offers maximum protection against corrosion under severe conditions. It does not contain any chlorinated solvents, CFCs or ozone depleting chemicals


Benefits

• Repairs damaged hot dip galvanised surfaces
• Fast air-drying and offers protection of hot dip Galvanizing
• Brilliant metallic finish to that of hot dip Galvanizing
• Highly abrasion resistant film does not peel off
• Offers long-term protection
• Prevents rust & corrosion

ApplicationsStructural steels, transmission towers, welding seams, bridges, relay towers, piping & ducting, offshore equipment, nuclear & power plants, antennas, metal fabrication, industrial maintenance, touch up to damaged galvanised coatings.


DirectionsFor Use Clean and degreased the surface prior to application. Remove all rust and loose scales by wire brush. Shake can well for a couple of minutes till bearing noise from inside the can is audible. Repeat the same before every application. Spray light, even coats with sweeping action of the hand onto completely dry surface. Allow solvents to completely evaporate before re- application. Optimum desired film thickness is about 2-3 mils. Drying time to touch is about 10-15 minutes, to handle is about one hour and for complete cure is about 24 hours. Flush away paint products or product residues in the dip tube of the valve by cleaning it. Cleaning of the valve should be performed after spraying is finished, by inverting the can and pressing the actuator button in short bursts till only the propellant comes out. If required, to prevent clogging, remove the actuator button and clean the button orifice with a thin, fine wire.


Caution Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

JETEX ABC-50 CLEANER is a multipurpose, non-abrasive, aqueous, biodegradable, cleaner / degreaser which can be further diluted with water to meet various cleaning applications.
It aggressively attacks and removes grease, oil, dirt, sludge and other light contaminants and allows to be rinsed off with water.
It does not contain any ozone depleting chemicals or chlorinated solvents and equals performance of solvent-based cleaners.


ApplicationsSuitable for mechanical components washing and degreasing applications.


Benefits

• Removes oil, grease, dirt & sludge deposits
• Biodegradable & leaves no residue
• Multipurpose foaming formula
• Nonflammable & non-abrasive
• Equals performance of solvent based degreasers

Dilution levels will vary subject to the type of surface, contaminant and contamination level of the surface being cleaned. Start at higher concentrations of JETEX ABC-50 CLEANER in water and work up to lower concentrations till satisfactory performance and cleaning is obtained.


Directions for Use Dilute the product by adding water to it. Stir mechanically with a stirrer if required. Apply product by brush, swab or by dipping components into the cleaner solution. Allow time to penetrate contaminants and then rinse off with water. For heavily soiled parts, use a wire brush or an abrasive to remove excesses. Always clean the surface thoroughly with water to remove any residues left behind and never allow to dry on any surface. Test for compatibility on soft metals and plastic surfaces by checking on a small area.


General Use in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).


DisposalAll used and unused product should be disposed of in accordance with state regulations.


Handling Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.


Limited Warranty The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

Fast evaporating, residue free, cleaner / degreaser for fast removal of contaminants from metal surfaces; free of chlorinated solvents
JETEX HDG-86 is a non chlorinated, fast drying cleaner / degreaser for mechanical cleaning applications as a alternative for chlorinated solvents like CTC, 1, 1, 1 Trichloroethane. Safety standards from both, worker health as well as environmental, prohibit the use of chlorinated solvents like CTC or 1, 1, 1 TCE.
JETEX HDG-86 rapidly penetrates through grease, oil, dirt, dust and other contaminants and cleans equipment fast. It has a pleasant citrus odor, fast evaporation rate and does not leave any residue. JETEX HDG-86 cleans metal surfaces effectively due its superior penetrating and wetting ability.
It does not contain any CFC’s, chlorinated solvents or ozone depleting chemicals and is suitable for cleaning / degreasing of all metal surfaces and equipment only.


ApplicationsFor heavy duty cleaning / degreasing applications of all mechanical equipment as brakes, chains, gears, bearings, clutches, generators, hand tools, molds, dies, slides, pumps, forklifts, valves, nuts & bolts, pipes, power tools. Safe for use on all metal surfaces, glass, most plastics and ceramics.


Benefits

• Removes grease, oil, dirt, dust, sludge
• Non corrosive, non conductive & non staining
• Removes tar, adhesives and other tough contaminants
• Leaves no residue
• Safe on metals, most plastics, glass and ceramics
• Non chlorinated formulation
• Fast penetrating and superior wetting action
• 360° valve allows spraying in any position-even inverted

Directions for Use (Bulk)Never use on energized equipment. Do not dilute with any other cleaning agent, water or mix with any solvent. Apply onto soiled surface and continue dipping / applying / spraying liberally until only solvent runs out clearly and contaminants have been washed off. To remove heavy carbon or oxides, use a brush. Allow solvents to dry off the components before reactivating. To enhance drying time, apply forced air or wipe dry with an absorbent cloth after applying. Use only when completely dry. Test on plastics prior to use for compatibility.


Directions for Use (Aerosol)Never use on energized equipment. Spray using pin-point extension tube onto soiled surface and continue spraying liberally until only solvent runs out clearly and contaminants have been washed off. To remove heavy carbon or oxides, use a brush. Spray starting at the top of the surface and slowly working towards the bottom. Allow solvents to dry off the components before reactivating. To enhance drying time, apply forced air or wipe dry with an absorbent cloth after applying. Use only when completely dry. Test on plastics prior to use for compatibility.


Caution: Contains flammable solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.


GeneralUse in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).


DisposalAll used and unused product should be disposed of in accordance with state regulations.


HandlingRead instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.


Limited WarrantyThe information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

High temperature copper based anti seize thread compound
Solid lubricant paste for all threaded & bolted connections; lead and nickel free

Applications

• Highly recommended for use on all threaded and flanged connections operating at very high temperatures and corrosive conditions to enable faster and rapid non destructive disassembly after long operational periods as in autoclaves, furnaces, boilers, reactors, turbines, extrusion mandrels, compressors, heat exchangers, gas generators, plastic moulding machines, chemical and steel plant equipment.

• Heavy duty thread compound for studs, nuts, bolts, valve stems, spindles, exhaust pipes, cylinder and engine head screws, steam lines exposed to high temperatures, water and corrosives to provide complete protection from seizure and corrosion and which also need to be reopened or re tightened after assembly and initial operational period.

Benefits

• Extremely wide service temperature range of -20°C to +1100°C
• Makes disassembly easy and non-destructive even after long operational periods at high temperatures and adverse working environments
• High load withstanding capacity
• Creates an effective matrix between mating surfaces to prevent metal-to-metal contact
• Protects surface from wear and friction
• Good corrosion protection
• Water resistant
• Ensures consistent tightening of threaded connections and provides an optimum balance between torque required to tighten and pretension
• Prevents bolt breaking, sintering, fusion, seizure, thread striping and distortion of threads
• Meets requirements of MIL-A-907E

Directions for UseShake the can vigorously for a couple of minutes before spraying till the bearing noise from inside the container is audible. Repeat before every application. Spray onto a clean, dry and degreased surface. Only a thin film of this lubricant is required. Allow solvents to evaporate. Spray from a distance of 20-30 cms. Repeat if necessary. For cleaning the valve dip- tube after spraying, invert the can and depress the actuator button for a few short bursts till only the clear propellant comes out.


Caution:- Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.


General Use in well ventilated areas. Avoid continuous breathing of Vapor and spray mist. In closed areas or areas with poor ventilation, use respiratory protection. For complete details on safety, short and long term exposure, refer to this product’s safety data sheet (SDS).


DisposalAll used and unused product should be disposed of in accordance with state regulations.


Handling Read instructions on the container label of the product before use. The product safety data sheet (SDS) contains the relevant information regarding personal protective equipment, safe use, physical and health hazards.


Limited Warranty The information and data contained in this sheet is accurate to the best of our knowledge or is obtained from sources, tests or experiences believed by us to be reliable and accurate. User is responsible for determining whether recommended product is fit for a particular purpose. All products should be tested for suitability on a particular application prior to actual use. We make no representations of any kind. Data offered without warranty.

High Gloss Fast Drying Flexible Acrylic Conformal Coating
ELECTOCOAT is a fast air-drying, lightweight, clear, tough and flexible acrylic coating designed primarily to protect printed circuit boards and electrical / electronic equipment against high voltage arcing, corona shorts, corrosion, ingress of moisture and fungus. It resists rust, tarnish, corrosion, moisture and has excellent waterproofing / weatherproofing abilities. ELECTOCOAT is highly abrasion & scratch resistant and protects electronic equipment completely due to its high dielectric strength. It does not contain any harmful chlorinated solvents, CFCs or ozone depleting chemicals.


Benefits

• Protects against rust, corrosion, tarnish, oxidation, moisture and weathering influences
• Provides a high-gloss, clear protective finish that remains transparent and does not fade or become yellow Provides a protective and insulating film that shields printed circuit boards from electrical leakage and short circuits
• Prevents sparking and corona discharges
• Non-conductive and has good dielectric properties
• Excellent resistance to weak acids & alkalis, water, oils and chemical fumes
• Easily solderable and very convenient for onsite repair jobs
• Conforms to requirements of specifications MIL-I-46058C

Applications Insulation and protection of all electrical, electronic and high- tech equipment of: general electronics, printed circuit boards, thick film circuits, high voltage transformers, electrical motor coils, cables, wires; for moisture proofing and corrosion prevention of any industrial, automotive, aviation, marine and military electrical & electronic hardware.


Directions For Use - Bulk Mask and protect areas not to be coated. Apply steady even strokes by means of brush. Component to be coated can also be dipped into the coating. For best results, two light coats are better than one heavy coat. Coating becomes dry to touch in about 15-20 minutes. Complete cure takes place in about 24 hours depending upon the relative humidity.


Directions For Use - Aerosol Shake can vigorously for at least one minute after bearing noise from inside the can is audible. Mask and protect areas not to be coated. Hold can 12-15 inches away from surface to be coated and spray in steady, even strokes. For best results, two light coats are better than one heavy coat. Coating becomes dry to touch in about 15-20 minutes. Complete cure takes place in about 24 hours depending upon the relative humidity. Clean the valve by inverting the can and spraying a few short bursts till only the clear propellant comes out. Clean the actuator button orifice by means of a thin, fine wire.


Caution:- Contains flammable propellant and solvents. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

MoS2 and solid lubricants based air-drying anti friction coating

Benefits

n
• Extremely wide service temperature range of -180°C to +450°C
n
• Low coefficient of friction, high surface load and pressure withstanding capacity
n
• High and low temperature performance
n
• Protects surfaces from wear, galling and seizure
n
• Oil, grease and solvent resistant
n
• Prevents stick-slip and fretting corrosion
n
• Provides clean dry film lubrication and does not accumulate dirt or abrasives
n
• Offers surface protection from corrosion
n
• Lubricates under adverse operating environments such as in vacuum or near radiation
n
• Provides maintenance free permanent lubrication where oil or grease contamination cannot be tolerated
n
• Excellent lubricity and highly abrasion resistant
n
• Increases service life of equipment
n

Applications

n
• As a dry film lubricant for components exposed to abrasive or dusty environments as threaded connections, pins, levers, pivots, splines, bolts, chains.
n
• As a metal pretreatment lubricant prior to assembly for effective running in to reduce wear, friction and eliminate metal to metal contact and seizure.
n
• As a lubricant for components exposed to critical environmental conditions as vacuums, radiation, high temperatures, humidity.
n
• As a heavy duty, high temperature thread compound to prevent seizure and corrosion and facilitate easy assembly and non-destructive disassembly.
n
• As an anti friction coating for metal cutting tools as millers, reamers, taps, drills, gear cutters, punches, dies to prevent sticking, binding and metal build up; increase life of tools, production quality and efficiency.
n
• As an extreme pressure lubricant for heavily loaded or stressed surfaces to prevent wear, friction, galling, scuffing, seizure and fretting as for press fits, pins, levers, pivots, bearings, gears, splines, journals, linkages.
n

Directions for Use Shake the can vigorously for a couple of minutes before spraying till the bearing noise from inside the container is audible. Repeat before every application. Spray onto a clean, dry and degreased surface. Only a thin film of this lubricant is required. Allow solvents to evaporate. Spray from a distance of 20-30 cms. Repeat if necessary. Excess lubricant may fall off during assembly. For cleaning the valve dip-tube after spraying, invert the can and depress the actuator button for a few short bursts till only the clear propellant comes out.


Caution:- Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

JETEX CompressorOil 68 SPis a high performance compressor oil developed for screw compressors. It provides sufficient lubrication under a wide operatingtemperature and load conditions. The formulation provides superior thermal & oxidation stability, good demulsibility and rust protection.


Application

n
• All types of screw compressors where a mineral oil is recommended.
n

Benefits

n
• Excellent oxidation and thermal stability
n
• Anti-wear additives provide protection against component wear & tear.
n
• Protection against rust and corrosion
n
• Longer component life, Reduced equipment downtime, Lower maintenance costs
n

Performance standardsPerformance exceeds the requirements of the following standards,

n
• Denison Hydraulics HF-0 DIN 51524 Part II
n
• CETOP RP91H
n

SKO – 22 Oil is synthetic knitting oil (Revolutionary & Certified Lubricant), specially designed and formulated for the lubrication of sinkers & needles of knitting machine to provide long life and extremely low friction performance. It is non-staining synthetic oil which does not leave any carbonaceous deposits, and due to its excellent lubricity, it reduces the power consumption & operating temperature of a machine. Its mild antistatic and antirust properties make it suitable for use in high speed knitting, texturizing and winding machinery employed in Textile and Polymer industries.
It is fully scourable and does not leave any stains whatsoever after the fabric is washed. It does not damage the paints or rubber and plastic parts used in knitting machines or affect the electrical controls of the machine. It is very much suitable for any brand or make such as (Terrot, Fukuhara, Orizio, Monarch, Camber, Vanguard, Mayer & Cie, Year China, Smart, etc.) And any (Circular & Linear) types of knitting machines.


Exclusive Features :

• It is non stainy in nature.
• It does not form any gummy deposits or formation of carbonaceous residues.
• Because of an excellent lubricity it reduces friction and wear and tear of needles. It also reduces power consumption & temperature of machine.
• Helps in high-speed operation with higher productivity.
• Completely scourable and compatible with other parts (paints, rubber, plastic) of the machine.
• Guaranteed & Proven product because it’s true values required for needle lubrication.

a range of high performance specialty industrial lubricants for all types of industries.

Copper and solid lubricants paste for all nuts, bolts, screws, threaded connections; lead and nickel free

ApplicationsAnti seize, anti rust & effective lubricant for protection of parts operating under severe corrosion, temperatures and steam, humidity, water or chemical attack as: studs, nuts, bolts, screws, pipes, keys, u-bolts, splines, taps, slides, seals, slippers, joints, plugs, gears, chains, exhausts sprockets, valve stems, manifolds, couplings, adapters, bearings, gaskets, packings, drills, bushings, king pins, spindles. For use on all threaded and flanged connections operating at very high temperatures to prevent seizure, corrosion and atmospheric influences as in: cat crackers, autoclaves, cylinder heads, furnace bolts, generators, fuel feed nozzles, boilers, reactors, ladles in steel plant, turbines, burners, extrusion mandrels, ovens, soot blowers, blast furnaces, pumps, engines, steel plant equipment, compressors, heat exchangers.
For use in oil rigs, refineries, petrochemical, chemical & fertiliser plants as a heavy duty thread assembly compound, pipe sealant and anti corrosion compound for components exposed to very high temperatures, steam, hot, cold, brine water, humidity, corrosive or chemical environments to provide protection, effective lubrication, sealing and corrosion protection and prevent seizure, jamming and rusting even after long operational hours under very severe conditions.
For use in rotary kilns in cement plants as a high temperature, extreme pressure, low friction lubricant for effective lubrication of live ring supports.


Benefits

• Extremely wide service temperature range from -18°C to +1100°C.
• Eliminates metal-to-metal contact and maintains lubrication qualities under wide variations of temperature, pressures and adverse operating conditions.
• Prevents fretting, galling, tightening, welding of mating surfaces.
• Protects against galvanic corrosion between dissimilar metals in contact.
• Enables faster and rapid assembly and non-destructive disassembly even after long term exposure to high temperatures and corrosive atmospheres.
• Prevents stripping and cold-welding of threads and avoids sintering, fusion, thread stripping, bolt breaking and distortion.
• Low friction properties reduce wear and friction to increase life of the equipment and avoid costly replacements.
• Highly resistant to hot and cold water, steam, humidity, brine water, mild acids and alkalis, corrosion, aging and oxidation.

Methods of Application Clean and degrease the surface prior to application. Remove all coatings, greases, dirt, grime, loose rust and scales by means of a fine thin wire. Apply METAPLAT liberally by means of a stiff wire brush on to the surface and evenly right down to the roots of threads. Excessive compound provides a good sealing effect and need not be removed. Do not mix with conventional oils and greases.

Note METAPLAT is not for use as a lubricant for high-speed bearings. However it may be used for lubrication of heavily loaded bearings under very slow speeds.

Dielectric, non-melting silicone grease like compound for electrical parts insulation and moisture protection

Applications

n
• As a moisture proof seal and protective barrier coating on high tension electrical connections of all electronic, electrical, industrial, marine, aircraft, automotive equipment for providing greater resistance to tracking and effects of corona discharges
n
• As a dielectric seal cum lubricant for switches, cables, cable connectors, high voltage insulators, battery terminals, plastic and rubber parts, bushings, electrical insulation, spark plugs, disconnection junctions, ignition systems to prevent formation of a conducting film of water, eliminate risk of flash overs, minimise electrical leakage and prevent ingress of moisture
n
• For all electrical fittings exposed to marine environments to protect from salt-water corrosion, oxidation, moisture penetration, reduce maintenance and increase wear life of equipment As a protective coating on insulators and bushings in chemical plants to protect them from chemical fumes, vapours and gases
n
• As an assembly lubricant for various metal-plastic and metal- rubber pairings
n
• On to surfaces of ceramics, metals, insulating materials to impart high surface resistivity
n

Benefits

n
• Wide service temperature range from -50C to + 200C
n
• Moisture resistant and excellent water repellency qualities prevent formation of conducting water film
n
• High degree of resistance to salt spray, humidity and corrosives
n
• High dielectric strength
n
• Chemically inert
n
• Very low volatility
n
• Very good thermal and oxidation stability
n
• Consistency is largely independent of temperature and maintains its grease like consistency at high temperatures
n
• Nontoxic, non volatile, non melting and odourless
n
• Compatible with plastic, rubber and metal pairings
n
• Very good adhesion on all metals, glass, plastic, ceramic, rubber substrates
n

Method of Application Apply by means of hand, brush or putty knife. Can also be dispersed in solvents like mineral spirits, xylene or methyl ethyl ketone for thinning the consistency and making it easier to apply by brushing, dipping or spraying. Do not mix with other oils or grease.


Directions For Use (Aerosol only) Shut off equipment and turn off power before spraying. Spray thin, light and even coats onto clean, dry and moisture free surfaces to a thickness of about 0.4-0.5 mm. For optimum use, clean surface dry from moisture. Allow few minutes for solvent to completely evaporate before resuming operations. Removal of the film can be done by normal degreasing solvents.


Caution (Aerosol only) Contains flammable solvents and propellant. Do not spray near naked flame, hot surfaces or energized equipment. Use with adequate ventilation.

Silicone grease like compound for use as a release and separating agent

Applications

n
• Release agent for epoxy, polystyrene, PVC, polyesters and other plastics
n
• Release agent on polished dies for vinyl sheet embossing to improve surface finish of vinyl processed materials
n
• Release agent for plastic extruders and processing equipment
n
• Break in treatment for bladders on tyre presses
n
• Mould release agent for foundry shell and core molds
n
• Rubber lubricant and preservative to maintain its resilience to age hardening and stress cracking
n
• Release agent for adhesives and glues in plywood and board manufacturing industry for acting as an anti stick agent and preventing contact and adhesion of adhesive
n
• glues to machine components
n
• In metal casting applications during shell molding process for breaking in new casts, zinc molding plates smoother operations, lesser rejection, increasing life of the dies, improving surface finish and outlook of components and chill casting of brass
n

Benefits

n
• Wide service temperature range from -40C to +204C
n
• Very low volatility
n
• Very good thermal and oxidation stability and minimises build up on mold
n
• Nontoxic, non melting and odourless
n
• Chemically inert and does not react with plastics and metals
n
• Suitable for high temperature moulding operations
n
• Excellent release properties increases production output while minimising rejection
n
• Resistant to water
n
• Does not dry out
n

Method of Application Apply by means of hand, brush or putty knife. Can also be dispersed in solvents like mineral spirits, xylene or methyl ethyl ketone for thinning the consistency and making it easier to apply by brushing, dipping or spraying. Do not mix with other oils or grease.