GST : 27ABKPY3720E1ZI
4.0/5
Our Product / Services
We are leaders in the market for providing best range of 60 TON Deep Drawing Press and Deep Drawing Press
1.TYPE H TYPE DOWN STROKE
2.MAIN RAM CAPACITY 60TON
3.RETURN CAPACITY 10TON
4.STROKE 400 MM
5.DAYLIGHT GAP 600 MM
6.SHUT HEIGHT 200 MM
7.NO. OF MAIN CYLINDER 1 NO. Double ACTING
8.MAIN RAM DIA 110 MM
9.BED SIZE 600 x 600 MM
10.MOVING BOLSTER SIZE 600 x 600MM
11.MAIN CYLINDER SPEED
A)APPROACHINGSPEED 70 MM / SEC
B)PRESSING SPEED 8-15 MM/ SEC
C)RETURN SPEED 100 MM / SEC
12. WORKING HEIGHT FROM FLOOR LEVEL 700 MM
13. MAXIMUM WORKING PRESSURE 250 KG / CM2
14. T- SLOT SIZE 1/2inchs
15. DIE CUSHION CAPACITY 25TONS
16. DIE CUSHION STROKE 50-200 MM
17. DIE CUSHION TABLE SIZE 300 X 300 MM (SINGLE PAD)
18, CUSHION PIN HOLES 25 MM DIA EACH
19. CYCLE CONTROL THROUGH PANEL
20. MODE OF OPERATION PUSH BUTTON HAVING THE PROVISION OFAUTO& INCH CYCLE
Additional Information:
Payment Terms : T/T
Packaging Details : Wooden Box
Delivery Time : 20 TO 30 DAYS
| Machine Description |
| Capacity- 200 Ton |
| Cylinder Id 300mm ST52 Seamless Steel Tube |
| OD 325mm EN8 M.S |
| Return Capacity- 20 Ton (Inclusive Top Tool Weight) |
| Operating System- PLC based HMI |
| Bolster & Slide Size - 800 mm ( L TO R ) x 600 mm ( F TO B ) |
| Bolster Type- Fixed |
| Pressing Stroke - 1200 mm, Down Stroking |
| Open Daylight - 1600 mm |
| Total Connected Load- 25 HP |
| Design- 4 Pillar inside column design, Fabricated structure |
| Slide Guiding - 8 Point gib Guiding system with Replaceable Phosphorus Bronze replaceable Linear |
| Geometrical Accuracies- Parallelism, Perpendicularity, Flatness as per JIS Standard Grade 2 |
| Ejector Pin Hole Dia- 40 mm |
|
|
| PRESSURE PLATE DETAILS |
| Dia Cushion Capacity- 80 ton |
| Pressure Plate Size- 750 mm x 550 mm |
| Hole in Pressure Plate- 280 mm |
| Ejector Capacity- 20 TON |
| Ejector Stroke- 200 mm |
|
|
| SLIDE SPEED (Please specify) |
| Approx. Approach / Pressing / Return Speed (30 / 3 / 60mm/sec) |
|
|
| STROKE AND PRESSURE CONTROL SYSTEM |
| Main Ram Pressure Controlling -Digitally Controlled by HMI |
| Slide Ram Stroke Adjustment-Digitally Controlled by HMI |
| Pressure Plate Pressure Control -Digitally Controlled by HMI |
| Pressure Plate Stroke Control -Digitally Controlled by HMI |
|
|
| HYDRAULIC SYSTEM |
| Hydraulic System -Specially Design Manifold Block For Leak Proof Operation. All Piping is Seamless with Welded and Tested. |
| Oil Tank -700 liters |
| Oil Filter-Return Line Oil Filter |
| Oil Cooling-Water Cooling Heat Exchanger |
| Hydraulic Pump -Yuken, Rexroth, Veljan or Equivalent |
| System Working Pressure-250 kg/cm2 |
| Power Pack Position- Top Of Machine with catwalk and safety ladder |
| Lubrication System -Auto Lubrication System |
Additional Information:
Payment Terms : T/T
Packaging Details : wooden box
Delivery Time : 45-60 DAYS
Mr. Umesh Yadav & Mr. R P Yadav (Kiran Hydraulics)
Gala No. 6, Dharamraj Industrial Estate, Gate No. 2, Lake Road, Near CMS Computers, Tulshetpada, Bhandup West, Mumbai, Maharashtra - 400078
Share us via
