Our Products
Open construction, borosilicate glass with riffled inlet nozzle. Glass valve in vacuum nozzle prevents 'sucking back'. Internal jets constructed to prevent flooding and the outlet tube is bent to avoid turbulence and give rapid exhaustion. Ultimate Vacuum 85 mm Hg Overall Length 215 mm Inlet tube diameter 11 mm Outlet tube diameter 9 mm Vacuum Nozzle 9 mm
Heavy gauge enamelled copper wire, approximate resistance 0.5 ohms wound on former 110 x 30 mm length x diameter. Secondary coil of fine enamelled copper wire, approximately resistance 100 ohms on former 110 x 82 mm length x diameter. Both coils fitted with 4 mm sockets. Iron core 120 x 15 mm length x diameter.
These are fitted with an achromatic objective of F.L. 178mm, clear aperture 23mm and 8X ramsden eye piece with a 90 deg. Cross line reticle. The focussing is done by rack and pinion mechanism, with a range from 1000mm to infinity.
To accelerate the mixing of solution in test tubes Short, rapid accentric stroke, motor driven Neoprene cup imparts vigorous agitation to tubes or small flask held in or against it. Particularly efficient for dislodging sediments from tips of centrifuge tube. The housing is 5"x 8"x 7". The Vacuum Rubber at bottom prevents the machine from walking. Complete with speed control, cord and ON/OFF Switch and indicator to work on 220 V.
For mixing & grinding, electrically operated having capacity of few gms to 1 Kg & 2 Kg. Fitted with geared Motor with max. speed of 80 rpm.The jar is made of SS and having steel balls of different sizes to be put in jar for mixing & grinding pesticides powder.Jar is interchangeable and easily removable, light in weight and compact unit working on 220 V AC with cap. 1 KG.
(b)-do-S.S. Drum 2 Kg. capacity.
(c)-do-Aluminium Drum 1 Kg capacity.
(d)-do-Aluminium drum 2 Kg. capacity.
For drilling uniform and straight holes in cork or rubber stoppers. Cast-iron frame with wood platform 10 cm diameter to support work and adjustable guide rod, central hole through wheel spindle for ejector rod and introduction of lubricant(water or methylated spirit). Complete with set of 12 nickel-plated borers cutting sizes from 7 to 25 mm.
For showing the principles of platinum resistance thermonetry and for accurate temperature measurement using a bridge method such as 'Cary-Foster' bridge. |
The thermometer comprises a length of fine platinum wire of about 2 ohm resistance, wound non-inductively on a mica frame and soldered to stout copper leads. A pair of compensating leads are provided, all four leads being connected to 4mm socket terminals. Since the connection are soft soldered, this resistance thermometer is suitable for temperatures up to about 150oC only and for low termperature work. |
|
A Perspex organ bath with fine thermostatic temperature control; electric stirrer; and complete set of accessories, making it a versatile unit for all research work. Bath 12"x9"x8", with leak proof dovetailed joints, resting in sturdy metal frame; top of the bath carries a 1"x3/8" thick band, for fixing accessories, Inside the bath is a metal sheathed heating element (easily replaceable), controlled by means of a fine adjustable thermostat with sensitivity 1C.
The stirrer unit is completely independent and dips in the bath in one corner, fixing on its special stainless steel upright. A MS junction box is fitted to the bath frame, and carries all the electrical leads and connections, Two pilot lamps indicate functioning of the thermostat and stirrer.
Standard components are :-
a) Double set of glass inner vessels.
b) Oxygen tubes
c) Warming coils
d) Two stainless steel capillary levers.
e) Four stainless steel uprights with boss heads,
f) X blocks.
Comprises U & I cores of low loss magnetic material, to form a closed core of cross section 25 mm in plane of laminations, 32 mm perpendicular to them is an I - core of length 102 mm. U core external height 102mm. Internal height to take bobbin length 77 mm. Pair of pole pieces, each 65x30x25 mm with on end shaped to part of a cone for maximum flux density. Hole drilled through total length along cone axis to take a light beam. Pole pieces will accept supertrods & shading ring (provided with accessories) & may be clamped on any separation on U core, or in contact as a non laminated I - core. Cast aluminium alloy stand consisting of a heavy base on four rubber feet with removable clamping arms. Maximum dimensions of base 190x200x115 mm. Channel 35 mm wide & 3 mm deep to take transformer core, extends across full width. Integral support for arms, to rear, is below the level of the pole pieces. Arms pivot on steel spindle with adjustment of knobs to rear bringing hard rubber pads at front end of arms to bear on transformer core. Synthetic hammer finish except of clean metal in channel & 4 mm hole to take on earthing plug lead. Complete with all the accessories.
A most accurate andconvenient model of universal hand refractrometer with a selector knob to indicate measurement range from 0-90% Accuracy 2%, Incorporates built in Acmi-prism and special light reflection system for colour eliminator to obtain sharp critical boundary line and optimum contrast Hand Refractrometers also available in three separate ranges Model b. 0-32% c. 28-62% d. 58-90%
|
Digital a world class quality made by the best load cell of Japan, large L.E.D. for easy view, microprocessor 8085 based, built in step down transformer, suitable for 220 volts AC input, electric main 220/230 volts single phase 50 cycles AC.
a) LCB-1 600 gm 0.1 gm 100%
b) LCB-1 (Super) 600 gm 0.1 gm 100%
c) LCB-2 6000 gm(6Kg) 01 gm within range
d) LCB-2 (Super) 6000 gm(6Kg) 01 gm within range
e) LCB-2A 10000 gm(10Kg) 01 gm within range
f) LCB-2A (Super) 10000 gm(10Kg) 01 gm within range
g) LCB-2B 12000 gm(12Kg) 01 gm within range
h) LCB-2B (Super) 12000 gm(12Kg) 01 gm within range
i) LCB-2C 15000 gm(15Kg) 01 gm within range
j) LCB-2C (Super) 15000 gm(15Kg) 01 gm within range
Detachable polishing pan for use with Tablet Coating Pan Cat.No.2247 is made of mild steel painted and provided with inner lining of superior canvas cloth, inner dia 12"x8" high with opening of 7" dia neck used for polishing tablets.
Digital spectrophotometer ranges 340 to 960 nm with facility for automatic concentration, % transmission & O.D. measurement. Wavelength resolution 5nm. 3 digit LED display with round test tubes.
Specifications:Range 340 to 960 nmResolution 0.1% T:, Abs. : 0.001 Output %T: 0 to 100%, Abs: 0 to 1.999, Conc: 0 to 1999 Detector Silicon Photodiode Light Source 6V, 1Amp.Vertical Tungsten Halogen Lamp Monochromator 600 Lines/mm gratingPath Length 10 mmSpectral Bandwidth 10 mmWavelengthResolution 5 nmWavelength Accuracy 2.5 nmRepeatability +_ 2 nm Recorder Output Available Display 3 Digit Bright Red LED DisplayOperating Temp. Range 5 to 45 degree cPower 230V +_ 10% AC, 50 HzDimensions 490 x 300 x 165 mmWeight 8.5 kg
A versatile lever operated semiautomatic machine for various operations with levers is order of
1. plates for putting of capsule by hand
2. removal of caps
3. filling of powder by dispensing of brush pressing
4. fixing of caps and sealing
5. Injection of capsules.
Contact parts of stainless for 100 capsules of size 0 to 2 or 5 (anyone size in order). -do- capacity of 200 capsules at time.
The test equipment work on up and down movement of tablet in medium of water kept at 370C. Built in a steel cabinet of 17"x12"x9" high which housed a geared motor for the vertical shaft drive the shaft moves up and down by 50 to 60 mm at speed of 28-32 strokes per minute. On the upper end of the shaft fitted a horizontal strip with clamp on either side. These clamps hold glass vessels open at both ends and with stainless steel wire gauge with rubber rings at the lower end, which dips in water. Two independently thermostatically controlled hot plate rating 65 watt are fixed on the top of the cabinet upon which beakers of 1000 ml size are placed filled with water. Temperature is maintained at 37C with and accuracy of 10C. Independent switches with neon indicators for motor hot plates are fitted on a panel. Mains fuse with two meters mains cord and plug provided. Work on 220 volts A.C. mains.
(a) Vacuum Pump single stage oil sealed, Air cooled V belt driven and mounted on base plate with belt guard etc. S.No. Displacement in Lt./Min. Motor H.P. AC Single Phase 01 35 0.25 02 50 0.25 03 75 0.50 04 100 1.00
(b) Vacuum Pump Double stage specification as above Model S. No. Displacement in Lt./Min. Motor H.P. AC Single Phase 01 32 0.25 02 50 0.25 03 75 0.50 04 100 1.00 Accessories for above models
(c) Vacuum gauge with regulator and non return valve.
(d) Moisture Trap with non return valve and vacuum gauge with regulator.
(e) Vacustat with mercury Range 10mm to 0.001 mm/Hg. Pressure.
(f) V-Belt
|
Stroke type, barrel and piston arrangement with strock setting for various capacity of filling of tubes (from 5 gms to 50 gms.) detachable nozzles provided for each separate capacity. All contact parts are of stainless steel also stainless steel holder. Built on cast iron body, hand lever operated.
With Miller assembly at its heart, the unit is unmatched even by the most skilled hard honing and stropping. It permits to set extract angle of bevel of knife edge. A perfect cutting edge is obtained by sharpening the knife on this unit. Salient features of the unit include easy operation, automatic reversing of knife at regular intervals for an equal bevel angle on both sides of its edge eliminates the need for resurfacing the glass plate as the knife execution is across the full diameter of the rotating plate. The unit comprises of the reinforced sheet metal housing with hinged doors at front and side to facilitate easy cleaning and maintenance. It has a constant speed motor to rotate the ground glass plate 500mm dia x 12mm thick at constant speed. Knife up to the size of 300mm x 13mm can be easily sharpened on the unit. A lubricant reservoir needed for grinding and polishing a supported on top frame. The unit complete in all respects and duly painted. Supplied with cord and plug without micro abrasive suitable to work on 220V, single phase 50 Hz.AC. supply.
Jet needle type, consist of 6 S. Steel needle jets fixed on a brass (chromium plated) pipe of 12.5 mm dia with side tap and serrations for fixing rubber with tap water. Springs loaded ampul holding arrangement for various sizes of ampuls. With stainless steel bottom tray on stand.
Adding in line of Polylab Asqirators, these polypropylene Carboys are autoclavable, dependable & durable. These are also equipped with a leak proof spigot screwed to the body. These carboys are an excellent replacement for glass carboys and are used for storing & dispensing distilled water & other laboratory solutions.
Adding to the existing range of slide accessories, this slide storage rack made of ABS can hold 100 slides, recognizable through the numeric indexing. Spacing between the slots provide adequate backward & forward movement of slides for convenient recognition. the transparent cover provide excellent view of the slides stored inside.
Material : Acrylonitrile Butadiene Styrene
Designed specifically for analytical chemistry, the body of the funnels is 60 degree. Moulded in PP, these funnels are provided with internal & external ribs to prevent air blockage.
CODE NO. |
PARTICULARS |
INSIDE Φ |
STEM LENGTH |
PACKING |
57200 |
50 mm |
50 |
50 |
72 Pcs. |
57201 |
62 mm. |
62 |
67 |
36 Pcs. |
57202 |
75 mm. |
75 |
77 |
36 Pcs. |
57203 |
100 mm. |
100 |
95 |
36 Pcs. |
(Low speed)- It is a multipurpose unit, suitable for low speed homogenisation of tissues and also small volume low speed stirring applications pulley driven low speed provide high torque for grinding and homogenising of animal or vegetable tissues. Motor 1/20 H.P. 1200 r.p.m. continuous heavy duty, 220/230V A.C.
A versatile assembly serving both for heart perfusion and as an all-purpose thermostatic organ bath. The transparent perspex bath is 12"x9"x8" and rests on a metal stand: a 1"x3/8" thick edge at the top makes clamps etc. carrying the uprights and Temperature of the bath is regulated (CONSTANT). Thermostatic sensitivity 2C. The stirrer unit is completely independent, and dips into the bath in one corner, and fixes on its special stainless steel upright. A perspex connection box is fitted to the bath frame, and carries all the electric leads and connections. Two pilot lamps indicate the thermostat and stirrer operation. Extra accessories to enable the unit to be used as an all-purpose organ bath (2 unit) arc:- a) Double set of glass inner vessels. b) Oxygen tubes. c) Warming coils. d) Levers with stainless steel capillary. e) Four uprights with boss heads.
Features :
* Two Simultaneous Sampling Channels At 20 Ms/ S
* Combination Of A True Dso And An Analog Oscilloscope One Touch Change Over.
* 2 Kilo Words Of Memory Storage/Channel
* Crt Readout And Cursors For Voltage Time And Frequency Measurement
* Direct Print Out Of Screen Display Using Hpgl Commands With Rs-232 Interface.
* Ruggedised Environment Endurance.
* 1mv/Div Sensitivity.
* Two Input Channels, Algebraic Add And Subtract With Ch2 Invt.
* A Sweep
* B Sweep ( Delayed Sweep ), Triggered.
* X-Y Operation
* Read Out / Cursor
* Menu Selection , Data Acquisition For Probe Factor, Smooth On/Off
* Pre-Trigger Observation
* Single Sweep Operation ( Storage Band Width 5 Mhz )
* X2 To X10 Horizontal Expansion In Digital Mode
* Temporary Holding Wave Forms Displayed
* Storing And Recalling A Reference Memory
* Scale Illumination
* Continuous Variable Hold-Off
* Z- Axis Input
* Large Inch Crt With Internal Graticule
* Tv-V, Tv-H Triggering
* Calibrator Out Put For Probe Adjustment
Also Available :10 Mhz Single Trace Oscilloscope.25 Mhz Dual Trace Oscilloscope.30 Mhz Dual Trace Oscilloscope.60 Mhz Dual Trace Oscilloscope.40 Mhz Dual Trace Triggered Oscilloscope.60 Mhz Dual Trace Triggered Oscilloscope.100 Mhz 2 Channel , 6 Trace Oscilloscope.100 Mhz 4 Channel , 8 Trace Oscilloscope. .
Freeze drying is a technique of fundamental importance to the biological sciences in particular. In brief, Freeze drying is removal of water from a specimen after it has been frozen permitting maintenance of the specimen. Heat labile materials including proteins, antibiotic, vitamins preparations, blood plasma, hormones, tissue micro-organism etc. can now be preserved for years without any significant loss of activity. MB freeze laboratory model is housed in a super structure stainless steel frame with Complete with copper coil(Bonded outside), Perspex see through lid, gasket and control instrument i.e. Digital solid state temperature indicator LED display for measurement of temp and electronic vacuum indicator. The unit made out of hermetically sealed compressor and with 100 liters/min direct motor drive rotary vane type vacuum pump of double stage with Air ballast having ultimate vacuum of 1x30 toot or pump head. Temperature range 40 degree c. at ambient temperature of 20 degree c. Condenser trap: All non magnetic stainless steel fabrication, argon welded dished bottom for complete effluent removal. Refrigeration coils made of copper bonded to outside of condenser heavily insulated temp is adjustable to 40 degree c. and is maintained automatically. Vacuum drum has 12 port manifold(Main drying chamber) made of stainless steel non-magnetic grade with Perspex to cover.
OPTIONAL ACCESSORIES Secondary drying unit Pre-freezer attachment Automatic voltage stabilizer 5.0 KVA
For determination of basal metabolism, by measurement of oxygen consumption. The 6 litre capacity float is fitted with chain compensated counter balance. A thermometer is fitted on the float. Movements of the float are recorded by means of gravity writing ink pen, adjustable by a lever at the bottom.
The recording cylinder 12"x6" is of the lift-off type, and is driven by an electrical unit, giving two speeds viz. one rev. in 20 minutes and one rev. in 4 minutes. Speed is chaneged through a lever.
Made from brass/gun metal machine made perfect shapes smooth and polished cavities. Nickel plated various capacities with a number of mould in each set. Capacity 1 gm , 1.5 gms & 2 gms (15.4 grains).
(a) 4-moulds set (b) 6-moulds set
(c) 12 moulds set
Square section aluminium alloy track, length 1.5 m, with staggered holes, supported on two light alloy castings. One support has a two point contact and other a one point contact for lateral and horizontal adjustments by means of a knurled screw. Identical end caps enable air to be introduced from either end of the track keeping the other end closed.
A neat stainless steel operating table with improved drainage, improved multiple heating; greater versatility and convenience in use; all steel frame. Combining the advantageous features of the Brodie operating table, and modern trends in stainless steel operating furniture, this table will be found ideally suited for all classroom animal work.
Top 51"x 18"x 40" high, made entirely from stainless steel, in two halves sloping towards the center. A small wedge over the whole length separates the two halves. Under the wedge is provided a brass drain pipe, removable and replaceable by sliding IN or OUT. Blood and other fluids flow towards the center of table, from where these drip into the drain pipe, and are carried through an end drain-tube to the receptacle. After operation the whole top can be washed clean, the drain pipe removed, cleaned and replaced.
The stainless top is heated by a set of electric lamps, placed to effectbalanced heat dissipation.Tying-up cleats are fitted. Dog holder with its stainless steel upright and universal joint. Two stainless steel uprights slide along slots in the top, and will be found useful for fixing accessories. A stainless steel swing tray is fitted on an upright in one corner of the top and will be found very useful for placing dissecting instruments, accessories etc.
Mirror type, to trace the image of a microscopic object on a paper. A beam splitter prism of optical glass is positioned over the eyepiece with a large size swinging mirror which causes the image of the object to appear on a plane surface enabling its tracing.
A 600 x 75 mm plane hinged to base at one end carries a pulley at the other. A movable block enables variation of inclination of plane, a friction slide 100 x 65 mm which is reversible and has one side cut away for half of its area. Complete with metal roller 75 x 25 mm diam., with pan but without masses.
It is a double walled unit mounted on a sturdy angle iron frame. Inner and outer made up of heavy M.S. sheet, with outer duly hammertone painted and inner with high temperature aluminium paint. The gap between two walls is fitted with high grade glass wool to minimise thermal loss. Brackets to support the heavily laden drying trays at adjustable height are provided on the sides of inner walls. Heating is brought about by strip type air heaters, and each heater is and independent unit which can be easily replaced in event of failure.Temprature range from 50o C to 250o C is controlled by Thermostat Controller with an accuracy of 1oC.Ventilation is provided with adjustable opening at the opening at the top to exhaust the fumes of vapours produced during processing. Unit is supplied with 3 shelves and extra shelves can be supplied at extra cost. A heavy duty 'V' belt driven motor suitable capacity provides forced air circulation so as to ensure uniform heating throughout the inner chamber. A separate control pane is fitted to the chamber with individual control for ON/ OFF, air circulating fan and thermostat. To work on 400/400 Volts A.C. supply only.
INNER CHAMBER SIZE:
Used for storing cadaverous under low temperature cool conditions in order to prevent decomposition, These units are double walled with outer made of M.S. Sheet duly painted and inner walls of S.S. Trays made of G. I. Sheet to carry dead bodies are provided with handles so as to carry dead bodies. Trays travel on rollers fitted with ball bearings for easy movement. Hermitically sealed compressor serves refrigeration unit, to maintain temperature range of -2 C to 5 C or - 15 C to -20 C (as ordered) Unit is fitted with Digital Temperature Indicator cum Controller To work on 220/230 volts A.C. Supply.
CAPACITY OF BODIES: Single bodies Two bodies Three bodies Four bodies Six bodies
These are double walled units with outer made of M.S. sheet duly enamel painted and inner made up of heavy gauge S.S. sheet. Gaps between the two walls is dully fitted with high grade glass wool to avoid thermal lass. Temperature range from 150o C is controlled by hydraulic with an accuracy of 1o C It is capable of with standing a high vaccuum. Provided with vaccuum gauge, see through transparent window of toughened glass and one shelf. To work on 220/230 Volts A.C. Supply.
Inner Chamber Size :
200200mm
250250mm
250300mm
300300mm
OPTIONAL ACCESSORIES : Automatic Digital Temp. controller cum Indicator. Timer for above
Round glass or S.S. jar of 30 cms. dia. 30 cms. depth motor fitted with a stirrer having water circulation to maintain gradient of temp. Suitable to hold 6 viscometers. Digital Electronic Temp. Controller and Indicating lamps. Temp. Range 5C above embient to 95C. Accuracy 0.1C.
This has some designs cut-out on its boards, with a stylus, signal indicators ( light/sound/digital counter). It is used for investigating psycho-motor functions and visual-motor coordination. The significance of this instrument lies in its capacity to enable studies of various kinds of movements i.e linear, curvilinear, angular and in various directions. Comes in two different models a) Simple Stabilimeter b) Digital Stabilimeter with Timer and Error Counter.
Most suitable for conducting various experiments on a variety of seeds under different conditions of temperatures and humidity. Atmospheric conditions are created with the chamber to perform different experiments without going onto the field. The walled unit has inner chamber made up of anodized aluminum or stainless steel and outer outer chamber of M.S sheet duly painted. Full view inner glass door permits inspection of specimens. Both compartments are provided with independent controls. Each chamber can accommodates 14 perforated trays of size 430*480m.m. each. Humidity (NOT ADJUSTABLE) IS created in a S.S. water reservoir filled at bottom in both chambers to create 90% to 95% -+ 3% RH humidity.
INSIDE CHAMBER SIZE (WXHXD) (a)One chamber can control temperature from ambient to 50%c -+ 1 degree c. and the other chamber is fitted with ISI marked SHRIRAM compressor so as to maintain temperature from 5 degree to 50 degree c. -+1 degree c. (b)-do- same as above but fitted with heating and cooling system in both chambers, so as to control temperature from 5 degree c. to 50 degree c. -+ 1 degree in both chambers.
OPTIONAL ACCESSORIES (a)Interior illumination with 3 nos. fluorescent tubes (for each chamber) (b)Exterior illumination with 3 nos. fluorescent tubes (for each chamber) (c)Automatic 0-24 hour timer to regulate cyclic illumination conditions(for each chamber) (d)Humidity control arrangement from 55% to 95% -+3% RH, controlled by humidistat. (e)Electronic digital temperature indicator-cum-controller (for each chamber) (f)Dual setting digital temperature controller for setting two different temperatures for day night (g)Automatic voltage stabilizer 3 KVA (for each chamber)
Ideal for weighing small quantities of powder. Easy to use with hollow stem to aid introduction of the powder into narrow neck vessels e.g. volumetric flasks The flat base ensures stability on the balance pan.
To provide clean air to working platform horizontally. Sturdy Duraboard construction. Elegant sun mica finish. Silent motor & blowers. Vibration free unit. Stainless steel working platform. HEPA filter efficiency 99.97% down to 0.3 micron. Pre-filter efficiency 99% down to 5 micron. UV germicidal lamp 15W/30W. Fluorescent illumination. Static pressure manometer. Cock for gas. Foldable acrylic transparent door. Plastic grill for protection of HEPA filter. Removable covers to attend motor blower filters.
SIZES: 1. 60 x 60 x 60 cm 2. 90 x 60 x 60 cm 3. 180 x 60 x 60 cm
Outer wall is made up of M.S. sheet duly painted and inside of S.S. The gap between inner and outer wall is fitted with high grade mineral glass wool. Temp. range from ambient to 70 degree c. is controlled by JUMO/ EGO GERMAN capillary type thermostat with an accuracy of +- 5 degree c. The unit is provided with manual titling device, so as to tilt the tray holding the eggs. To work on 220/230 volts A.C. supply.
OPTIONAL ACCESSORIES:
(a) Automatic water cut off device in case water supply is stoped.This is a solid state transistorized device which automatically keeps watch on regular supply of water in the flask and keeps the heaters On only when the water supply is normal. It automatically cuts OFF the supply of heaters from the mains when the water supply get disturbed and thus prevents the burning of heating element/melting of glass coil. Heaters would automatically be switched ON when the water comes to normal.
(b) Special grade rubber tumbling for connections (coil of 10 meters).
Pressure die cast aluminium alloy, other parts are of plated brass, cork lined, ensures firm grip at all angles of opening, opens upto 90 mm, with 250 x 8 mm nickel plated mild steel rod.
|
For school/college laboratories. Nominal 6 mm bore glass tube. With engine divided dual scales 675 to 820 x 1 mm Hg and 26.5 to 32.5 x 0.05 inch Hg. Verniers reading 0.05 mm and 0.002 inch. Mounted on polished wooden board for wall mounting. Supplied without mercury but with instructions for filling.
The two plates are supported in two rigid uprights and driven by belt in opposite direction. They are heavy, high resistance plastic with sectors of aluminium sheet. Two leyden jars (condensers) made from corning glass and aluminium foil. The whole is mounted on a wooden base nicely polished.
ALSO AVAILABLE MOUNTED ON TRANSPARENT ACRYLIC BASE.
Made of Polypropylene, these cone shaped flasks are rigid, translucent & autoclavable. The screw cap keeps the contents of the flask contamination free and makes the flask leakproof. Threads should be disengaged before autoclaving.
Aspirator Bottles are made of Polypropylene and are therefore much lighter than glass. These are autoclavable durable and dependable. The leakproof spigot screwed to the bottle body requires only a half turn to open or close. These bottles are used for storing or dispensing distilled water and other laboratory solutions. Threads should be totally disengaged before autoclaving.
A 500 mm diam. disc marked every 5 is mounted on a heavy stand and is rotatable around its centre. It can be held in any desired position. The lamphouse, with a 12V 24 W special filament lamp has rotatable slots to provide light beams of varying widths & also narrow single, double & triple beams. Attached to the lamp house is an adjustable lens carrier with lens to provide diverging, parallel or converging light beams which are clearly visible in classroom. The lamphouse can be held in any desired position around the disc.
Optical elements are two 50 x 25 mm plane glass mirrors, and a metallic cylindrical mirror, each mounted in a holder, for reflection. For refraction, 20 mm thick acrylic semi-circular block, bi-convex lens, bi-concave lens each 140 mm long & a trapezium with 125 mm base are provided. Each of these elements has embedded magnets to hold on to the disc.