Write a Review
Our Product / Services
Our Complete range of products are Activity Cage, Histamine Chamber, Super Speed Centrifuge, Beakers and Flask Stand.
DIGITAL ACTOPHOTOMETER ( ACTIVITY CAGE) is designed to study the spontaneous or induced or locomotor activity in small animals like mice or rats. In this apparatus , we have used the Optical sensors and emitters to record the horizontal movements of the animals on a six digit digital counter display.
A compact Histamine Aerosol apparatus consisting of a clear perpex exposition chamber divided in two sections an all glass neubilizer and dial type sphygmomanometer for assay of anti-histamines drug on guinea-pigs etc.
The centrifuge is useful for research work in medical pharmaceutical, Industrial and research Institute. It is also suitable for determination of settlement of paints, pastes, cosmetics and food products. The unit is housed in a strong fabricated sheet steel housing having front panel where controls are mounted. Special features include lid interlock, stepless speed control.illuminated switch lamp, 1-99 Mts.Digital preset timer with bypass switch and Digital Speed Indicator., dynamic brake, unbalance output.(Supplied without rotor Head) Rotor Head is at extra cost.
Technical Data:
Max. Speed rpm 16000
Max. rcf g 17600
Max. tube size ml 100
Max.cap ml 400
Width mm 425
Depth mm 460
Height mm 465
Lowest Temp. C ----
Connected load KVA 0.8
Supply 230volts, single phase 50Hz, Ac.
Beakers, moulded in Polypropylene, have excellenct clarity and very good chemical resistance. The autoclavable beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient because of its tapered spout.
Moulded in Polypropylene, this Flask Stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at every point to contact. This Flask Stand can hold round bottom Flasks up to 10 Ltr. capacity. This Stackable Flask Stand can also be steam autoclaved
This Burette has a transparent acrylic body and a leakproof stopcock fitted with a self lubricating PTFE plug. Each Burette is individually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute mineral acids and bases except Hydrofloric Acid and Ammonium Hydroxide. The pH range of 1-14 is ideal and can be used up to 5% wt/wt of acids or 30% bases.
This is a fast release pipetting device for precise pipetting & zip quick emptying. The Knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. The moulded chuck has a silicon rubber collet inside to hold various pipettes of standard sizes. It resists acids & alkalies and can be easily disassembled for thorough cleaning.
| These Petri Dishes moulded in Polypropylene are clear & unbreakable. The moulding material being Polypropylene, these can be repeatedly autoclaved. The ridges on the inner side of the cap prevent the base from sticking to the cap. |
| 50 mm. | 36 Pcs. |
| 75 mm. | 36 Pcs. |
| 100 mm. | 36 Pcs. |
| 125 mm. | 12 Pcs. |
| 150 mm. | 12 Pcs. |
| Measuring Cylinders, moulded in Polypropylene, are single piece cylinder. These autoclavable cylinders have raised prominent graduations for easy reading and have excellent contact clarity. The broad base provides good stability. |
This jar is made of Polypropylene can hold 10 slides of the size 1"x3" back to back. The interior of the Coplin Jar is grooved in a way to hold slides in erect position. Domed & shallow thread screw cap provides protection to the slides.
These Conical Measures are very good for measuring small quantities of reagents. Moulded in Polypropylene, these autoclavable measures have a hexagonal base which provides it excellent stability. The Measures are clear have good chemical resistance and have raised graduations for easy reading.
| Polylab Dessicators are made of Polypropylene and Polycarbonate. The autoclave vaccum desiccators can hold vaccum upto 740mm of Hg for 24hrs. without any greasing. The top dome, moulded in rigid and transparent Polycarbonate, gives a crystal clear view of the desiccant placed inside. The Knurled knob on the top provides easy handling of the dome. The lower part is made of Polyproptlene. An internal groove is provided on the flange to hold a silicon rubber O-Ring. The Polypropylene stopcock is fitted with a self lubricating PTFE plug. This plug works three way i.e. vaccum creation, shutting off & vaccum releasing. |
| 150 | 1 Pc. |
| 200 | 1 Pc. |
| 250 | 1 Pc. |
A:For the convenient and safe handling of beaker containing hot solutions and for pouring out the contents.The jaws are asbestos covered to ensure firm grip.Overall length of tong 30cms.approx, Made of stainless steel.
B:As above but jaws silicon covered.
Fabricated out of thick wooden board or heavy gauge PCRC sheet mounted on sturdy angle iron frame. Fume Hoods are designed so as to throw-out all toxic/harmful vapors, thus protecting costly instruments and the person operating it. Outer is finished with sun mica or enamel paint and inner epoxy painted. Working tabletop is fitted with acid/alkali resistant tiles & a washbasin with connections provided inlet &outlet of water. the front door slides up &down on concealed counter balance weights. The unit is fitted with fluorescent light &gas cock for air/water supply.
Model KI-2004 is most modern and dependable sectioning equipment specially designed for precise sectioning of tissues upto 1 micron thickness. It has a front located feed indicator with CAM DRIVE SYSTEM for accurate feed setting from 1-50 microns in steps of 1 micron each. Some of the prominent features include independent fed mechanism with automatic safety device, universal knife holder with lateral movements to permit use of complete knife edge, ball and flangs type object holder for accurate centering of the specimen and full swinging protective cover for easier cleaning and lubrication.
The equipment assures smooth operation through out the life of the instrument and latest machining techniques are used in manufacturing individual components in addition. The microtome razor is fabricated from imported fine grain steel alloy tested for microstructures and the razor is heat treated to maintain optimum strength and sharpness.
Supplied complete with following accessories.
1. One Knife Razor 120mm with back and handle.
2. Three Object Holders 7/8", 1-1/8" & 1-1/2" dia.
3. One honing glass plate 10"x2" (approx)
4. One No. Oil can for lubrication.
5. One Dust cover & wooden cabinet.
a) HEATER MANTLE TYPE:Unit of three or six. Available in different capacities.
Please specify the capacity required.
b) HOT PLATE TYPE :This heater is used to heat soxhlet flasks and it consist of a mild steel housing. Unit of three or six. Three or six hotplates of dia 4 " are mounted on top of the housing and can be operated by individual a) ON/OFF switch b) Rotary switch c) Energy regulator as per requirements. Mild steel housing has two rods with two adjustable cross rods on which the glass apparatus can be fixed. Electrically operated on 220/230 volts AC mains with max. power rating of 900 watts. The apparatus is supplied without glass parts.
c) GLASS PARTS :Complete with one flask and bulb condenser with interchangeable joints. Different capacities. Please specify the capacity required.
Model KI-2204 specially designed for export is basically similar to model KI-2004 in design and appearance but incorporates moreadvanced technology and use of selected alloys for manufacture of individual components as per international standard particularly all its precision components moving parts adjustent and centering screws and also the complete razor holder assembly etc. are fabricated from specific steel alloy to ensure perfect functioning and long life of the equipments. The feed range from I to 50 microns is controlled through latest CAM DRIVE SYSTEM in precise steps of 1 microns each. The microtome razor is manufactured from imported fine grain steel alloy tested for micro-structure and razor is also heat treated to maintain optimum strength and sharpness. Supplied with following standard accessories.
Razor 120mm(with Object Holder
back and handle) 1 No. (set of three) - 1 set
Dust cover 1 No. Leather strap - 1 No.
Honing stone 1 No. Oil can - 1 No.
Complete in a sturdy wooden cabinet.
A fully dependable sectioning equipment designed for precise sectioning of tissues upto 1 micron thickness.It has a front located feed indicator with cam drive system for accurate feed setting from 1 to 50 microns in steps of 1 micron each.Prominent features include independent feed mechanism with automatic safety device, universal knife holder with lateral movement to permit use of entire knife edge, ball and flange type object holder for accurate centering of the specimen and full swing protective cover for easier cleaning and lubrication.The equipment assures smooth operation throughout the long life of the instrument as individual components are manufactured with modern techniques.The microtome razor is fabricated from fine grain steel alloy tested for microstructure and is heat treated to maintain its sharpness and strength.Supplied complete with one razor 120 mm with back and handle, a set of three object holders, one honing plate, oil can, dust cover, in wooden cabinet.
This is a versatile centrifuge most suitable for doctors, pathological laboratories and other users. A wide range of rotors and other accessories make this centrifuge ideal for most applications. The features include solid state speed controller, indicator lamp, see-through acrylic lid. Supplied without head. Works on 220 V, 50 Hz.
Designed for low temp. incubation and routine determination of Biochemical Oxygen Demand (B.O.D.) The unit is composed for tripple walled chamber with a thick layer of fine glass wool to prevent loss of heat. For lower temperature work, a cooling unit is provided at the lower portion of working chamber and heating arrangement has been made in the inner chamber for work at higher temperature. The temperature varies from 5C to 50C adjustable to any desired point by means of a high precision digital temperature controller indicator within the variation of 1C. Air Circulation fan has been provided to keep the temperature uniform inside the chamber. Inner chamber is fabricated from thick aluminium duly anodized/SS sheet & outer body is sprayed in white stove enamel finish.Three removable shelves are provided. Toggle switch, digital temp.controller indicator and indicating lamps are located on the instrument for easy handling and visibility. Complete with automatic internal light, connecting cord & plug to work on 220 Volts A.C.Inner Chamber size of Aluminium and Stainless Steel:a) 505x415x830mm (20"x 16.5" x 32") ( W x D x H) .(6.1 c.ft.)
b) 565x565x865mm (22.5"x22.5"x34.5") .(10 c.ft)
c) 650x580x900mm (26"x23"x35") . ( 12 c.ft)
Other sizes on request.
Made of seasoned hardwood, polished, with single row of holes, .Vertical pegs are provided for quick drying of the test tubes.
A. For Six Test Tubes, with six pegs, two holes of 32mm diameter and four holes of 22mm diameter.
B. For Twelve Test Tubes, with twelve pegs, two holes of 32mm diameter and ten holes of 22mm diameter.
Stainless steel rod 1200 mm long, l0 mm diam. with one pair each of small & large, light & heavy masses, two steel knife edges in adjustable holders & a metal bracket support drilled for wall mounting.
(Kshitij Innovations)
2320, Kacha Bazar, Cantt 133 001, Indi, Ambala Cantt, Haryana
Share us via
