Listing ID #3912230
Company Information
Ask for more detail from the seller
Contact Supplier
MCSÂ Make Hardness Testers of Vickers series are designed and manufactured for very high accuracy. ease of operation, reliability and long-term stability. These machines are suitable for checking Vickers or Brinell Hardness of steel and other metals Loads are applied with dead weights and are selectable with a push button.
The measurement of Diagonal / Diameter of indentation is done with the help of built-in optical system with graduated readout with micrometer After taking the indentation on workpiece the objective lens is automatically swivelled in position and indentation image appears on the focusing screen fitted in the front of the machine. Loading cycle is started with push button in the front where unloading is done manually by a hand lever.
All models ie - MVM-120, MVM-120 S, MVM-250, MVM-250 S confirm to IS 1754 & BS 427 for Vockers & IS 2281 - 1983 BS 240 ASTM-E-10 for Brinell Hardness
High Accuracy Reliability Ease of Operation
| Vickers Hardness Testing Machine : |
Vickers Cum Brinell Hardness Testing Machine : |
| MVM -120 • Only for Vickers test load • Load Range 5 kgf to 120 kgf MVM - 120 S • Only for Vickers test load • Load Range 1 kgf to 120 kgf |
MVM 250 • Only for Vickers & Brinell test • Load Range 5 kgf to 250 kgf MVM - 250 S • Only for Vickers & Brinell test • Load range 1 kgf to 250 kgf |
Highlights :
• Testing range is very wide, from soft metal such as Lead upto the hardest like hardened steel
• Thin Sheet metal is perfectly tested because the load applied is very small
• Built-in projection screen to get accurate results
Â
Computerised System
In a computerised system, the image is digitized using CCD camera fitted with the machine. The digitized image is sent to PC and by means of software the diagonals are measured automatically to give Vickers Hardness Number.
Measuring Range 0-3.2mm / 0-1.6mm / 0-0.8mm with 35X / 70X / 140X magnification respectively
Note :Â All above models are available with computerised version When Computerised model is required, wad 'PC' to be added in model for example MVM - 120 / PC. MVM-1205 / PC, MVM-250PC.
| Model | MVM - 120 | MVM - 120 S | MVM - 250 | MVM - 250 S |
| Load (kgf) | 5, 10, 15, 20, 30, 40, 50, 60, 100 & 120 (Load for Vickers) |
1, 2, 5, 10, 15, 20, 30, 40, 50, 60, 100 & 120 (Load for Vickers) |
5, 10, 15, 20, 30, 40, 50, 60, 100 & 120 (Load for Vickers) 15.625, 31.25, 62.5, 187.5, 250 (Load for Brinell) |
1, 2, 5, 10, 15, 20, 30, 40, 50, 60, 100 & 120 (Load for Vickers) 15.625, 31.25, 62.5 (Load for Brinell) |
| Optical Magnification | 70X, 140X | 70X, 140X | 35 X, 70X, 140X | 35 X, 70X, 140X |
| Maximum Test Height (mm) | 250 | 250 | 250 | 250 |
| Sweep of Machine Frame (mm) | 150 | 150 | 150 | 150 |
| Weight Approx. (kgs) | 180 | 180 | 180 | 180 |
| Dimensions (L x W X H mm) Approx | 650 X 320 X 990 | 650 X 320 X 1130 | 650 X 320 X 990 | 650 X 320 X 990 |
| Connected Load | 0.1 KVA, 1 Phase AC, 220V, 50 Hz | |||
| Load can be supplied in Newtons also | Least count of optical system 0.005 mm. | |||
| Model | MVM - 120 | MVM - 120 S | MVM - 250 | MVM - 250 S |
| Flat tabel of 100 mm Dia | 1. No. | 1. No. | 1. No. | 1. No. |
| Vee table for specimen - 6 to 80 mm dia. | 1. No. | 1. No. | 1. No. | 1. No. |
| Vickers Diamond Indentor | 1. No. | 1. No. | 1. No. | 1. No. |
| 2.5 mm Ball Indentor | - | - | 1. No. | 1. No. |
| 5.0 mm Ball Indentor | - | - | 1. No. | 1. No. |
| Vickers Hardness Test Plate | 1. No. | 1. No. | 1. No. | 1. No. |
| Brinell Hardness Test Plate | - | 1. No. | 1. No. | |
| Electrical Cord | 1. No. | 1. No. | 1. No. | 1. No. |
| Instruction Manual | 1. Book | 1. Book | 1. Book | 1. Book |
| 2.5 mm Balls | - | - | 5. No. | 5. No. |
| 5 mm Balls | - | - | 5. No. | 5. No. |
Nature of Business
Manufacturer / Exporter / Supplier / Retailer
Connect with us
For Buyer 
For Seller 
Help 