MK Teknology1 Pvt. Ltd. - Measuring Instruments & Equipment

HAL-HCO 202 handheld carbon dioxide meter makes it easy to take quick and accurate measurement of CO2 levels. Featuring the dual-beam, non-dispersive infrared (NDIR) absorption gas sensor technology, the HCO 202 has a wide measuring range and quick response to ambient changes in carbon dioxide concentration with long-term stability and durability.

When compressed air is dried in an air dryer, it is generally used for critical applications. It is therefore essential that the Dryness (moisture content) of the air be checked on regular basis. Most dryers guarantee a Dew Point 40C or below. This means that only if the air is cooled to that temperature, moisture will condense out of the air. The Dew point apparatus is a simple device which cools the compressed air and also provides visual indication of the Dew Point temperature. Dry air enters the glass body of the apparatus through a valve of the bottom. It swirls around the brightly polished chrome plated tube and exits the atmosphere at the tip. Either and dry ice is filled in the tube and the mixture is stirred with the help of a stirrer. The temperature of the tube is then measured by a low range temperature thermometer. The temperature of the tube is then progressively lowered by periodic addition of dry ice by the mixture. When the tube temperature reaches the Dew Point temperature, moisture will condense on the brightly polished surface, making it cloudy. The temperature recorded at that time is the Dew Point temperature. As a precautionary measure, the test should be repeated for verification.

Polished stainless steel enclosure provides the highest resistance to particle and microbial attachment, it is static neutral, and is easily cleaned and sanitized per ISO 14698-1. The CI-95A therefore provides unsurpassed resistance to bio-contamination. Per ISO 14698-1, Section A.3.2, the internal exhaust incorporates a HEPA Filter that eliminates reaspiration of the exhaust, and subsequent contamination or biocontamination of the environment being sampled.

We have built our reputation by providing highly accurate instruments that stand the test of time. An internal study conducted in 2014 confirms that particle counters returned for calibration over the past two years have an In Tolerance calibration rate of ninety-eight (98) percent! This study also included some units manufactured over 20 years ago. Simply, Climet particle counters are engineered, tested and calibrated with tight tolerances to exceed industry standards. Years of count efficiency testing has demonstrated that a properly calibrated Climet particle counter produces good count efficiency, even after more than a decade of field operation