Perma Epoxy 100 - EG is a two component epoxy suitable for injecting into the porous concrete to consolidate the structural elements. Primary Uses :

• Perma Epoxy 100 - EG is developed as a low viscosity easy flowing epoxy resin system which travels easily in the body of concrete and consolidates all loose particles
• Perma Epoxy 100 - EG is used for consolidating the concrete mass in weak concrete structures
• Perma Epoxy 100 - EG is used for preventing water contact of reinforcement in structures which hold water on one side
• Perma Epoxy 100 - EG is used for water proofing leaky porous concrete structures

Advantages :

• Perma Epoxy 100 - EG is a low viscosity product hence flows freely even into the finest cracks and pores of concrete
• Perma Epoxy 100 - EG is fast setting hence bleeding wastage of the product are minimized
• Perma Epoxy 100 - EG is supplied in pre weighed containers in the proportion of mixing hence convenient to use

Packing : Perma Epoxy 100 - EG base & reactors are supplied in 1kg, 40kg packing

Perma Grout 60 is a free flowing, non-shrink grout mix. Our Perma Grout 60 is known for its high strength. Perma Grout 60 is supplied in a grey powder form, which needs only onsite addition of water to form a ready to use grout slurry. Thus, we are a famous Manufacturer, Supplier and Exporter of Perma Grout 60 in India.

Primary Uses : Perma Grout 60 is used for :

• Grouting heavy machine foundations, which are subjected to huge dynamic loads.
• Grouting underneath base plates of machines.
• Grouting of column/stanchion foundations.
• Grouting of crane rails anchor bolts dowel bars etc.

Quick Setting Cement Grout is a quick setting cement and mortar supplied in dry powder form. Quick Setting Cement Grout constitutes a blend of cement grades and chemical set control agents. The product needs only onsite addition of required amount of water just before the use of Quick Setting Cement Grout. Our Quick Setting Cement Grout is very useful for plugging. Primary Uses :

• Heavy Duty Plugging : Quick Setting Cement Grout is suitable for plugging of pre-stressing/post tensioning holes or depressions in the pipes, sleepers or girders.
• Repairs of Buildings : Repairs to corners and edges of high strength concrete structures and general repairs in the building industry.
• Plugging Running Leaks : Quick Setting Cement Grout is used to stop leaks from water tanks and leaky basements because of its quick setting property.
• Sealing Joints : Quick Setting Cement Grout can be effectively used for filling joints, pointing brick stone masonry and water proofing.

Advantages :

• Easy to Use : Quick Setting Cement Grout is supplied in powder form. It only needs addition of water before use.
• Rapid Setting : "Rapid setting property of this product makes it useful in stopping running water.
• High strength : Quick Setting Cement Grout hardens to a high strength, which is comparable to the strength of the member under repair in hours only.
• Compatibility : Quick Setting Cement Grout is highly compatible for use with all cementitious materials, stone, brick, steel etc.

Directions for Use :

• Clean the surface to be treated as per normal surface preparation, methods for concrete removing, loose particles, deleterious materials etc.
• Damp down the surface.
• Mix Quick Setting Cement Grout and water in the proportion of 3 volumes of powder to 1volume of water and mix to obtain a stiff consistency paste.
• Press in position or trowel the paste to the finishing level and cure normally.

Properties :

• Physical form : grey/off white powder
• PH : 12
• Max. particle size : 600micron
• Initial setting time : 1.5minutes at 20^oC
• Yield : one kg. powder makes about 550 cc of paste

Health And Safety : Quick Setting Cement Grout is generally nontoxic. But it is advised that workers use gloves and avoid contact with skin. Accidental splashes of the powder on skin or eyes should be immediately washed with plenty of clean water. In the event of prolonged irritation seek medical advice. Packing : Quick Setting Cement Grout is available in1 kg, 10 kgs and 25 kgs packing. Shelf Life : Quick Setting Cement Grout should be stored in a cool dry condition away from moisture. Unopened packs have a shelf life of 12 months.

Perma Epoxy 100 - EG is a two component epoxy suitable for injecting into the porous concrete to consolidate the structural elements. Primary Uses :

• Perma Epoxy 100 - EG is developed as a low viscosity easy flowing epoxy resin system which travels easily in the body of concrete and consolidates all loose particles
• Perma Epoxy 100 - EG is used for consolidating the concrete mass in weak concrete structures
• Perma Epoxy 100 - EG is used for preventing water contact of reinforcement in structures which hold water on one side
• Perma Epoxy 100 - EG is used for water proofing leaky porous concrete structures

Advantages :

• Perma Epoxy 100 - EG is a low viscosity product hence flows freely even into the finest cracks and pores of concrete
• Perma Epoxy 100 - EG is fast setting hence bleeding wastage of the product are minimized
• Perma Epoxy 100 - EG is supplied in pre weighed containers in the proportion of mixing hence convenient to use

Packing : Perma Epoxy 100 - EG base & reactors are supplied in 1kg, 40kg packing

Perma Grout 60 is a free flowing, non-shrink grout mix. Our Perma Grout 60 is known for its high strength. Perma Grout 60 is supplied in a grey powder form, which needs only onsite addition of water to form a ready to use grout slurry. Thus, we are a famous Manufacturer, Supplier and Exporter of Perma Grout 60 in India.

Primary Uses : Perma Grout 60 is used for :

• Grouting heavy machine foundations, which are subjected to huge dynamic loads.
• Grouting underneath base plates of machines.
• Grouting of column/stanchion foundations.
• Grouting of crane rails anchor bolts dowel bars etc.

Quick Setting Cement Grout is a quick setting cement and mortar supplied in dry powder form. Quick Setting Cement Grout constitutes a blend of cement grades and chemical set control agents. The product needs only onsite addition of required amount of water just before the use of Quick Setting Cement Grout. Our Quick Setting Cement Grout is very useful for plugging. Primary Uses :

• Heavy Duty Plugging : Quick Setting Cement Grout is suitable for plugging of pre-stressing/post tensioning holes or depressions in the pipes, sleepers or girders.
• Repairs of Buildings : Repairs to corners and edges of high strength concrete structures and general repairs in the building industry.
• Plugging Running Leaks : Quick Setting Cement Grout is used to stop leaks from water tanks and leaky basements because of its quick setting property.
• Sealing Joints : Quick Setting Cement Grout can be effectively used for filling joints, pointing brick stone masonry and water proofing.

Advantages :

• Easy to Use : Quick Setting Cement Grout is supplied in powder form. It only needs addition of water before use.
• Rapid Setting : "Rapid setting property of this product makes it useful in stopping running water.
• High strength : Quick Setting Cement Grout hardens to a high strength, which is comparable to the strength of the member under repair in hours only.
• Compatibility : Quick Setting Cement Grout is highly compatible for use with all cementitious materials, stone, brick, steel etc.

Directions for Use :

• Clean the surface to be treated as per normal surface preparation, methods for concrete removing, loose particles, deleterious materials etc.
• Damp down the surface.
• Mix Quick Setting Cement Grout and water in the proportion of 3 volumes of powder to 1volume of water and mix to obtain a stiff consistency paste.
• Press in position or trowel the paste to the finishing level and cure normally.

Properties :

• Physical form : grey/off white powder
• PH : 12
• Max. particle size : 600micron
• Initial setting time : 1.5minutes at 20^oC
• Yield : one kg. powder makes about 550 cc of paste

Health And Safety : Quick Setting Cement Grout is generally nontoxic. But it is advised that workers use gloves and avoid contact with skin. Accidental splashes of the powder on skin or eyes should be immediately washed with plenty of clean water. In the event of prolonged irritation seek medical advice. Packing : Quick Setting Cement Grout is available in1 kg, 10 kgs and 25 kgs packing. Shelf Life : Quick Setting Cement Grout should be stored in a cool dry condition away from moisture. Unopened packs have a shelf life of 12 months.