Waterproofing Services #673902

Polyurethane Waterproofing

SINGLE COMPONENT POLYURETHANE BASED WATERPROOFING SYSTEM

DESCRIPTIONPerma Elasto Shield PU is a single component VOC compliant, ready to use, liquid polyurethane based waterproofing membrane. It is composed of a blend of polyurethane and selected hydrophobic fillers, minerals, gelling agents and special stabilizers. It cures by reaction with humidity, maintains its elasticity and is suitable for use both on horizontal as well as vertical surfaces. Upon curing Perma Elasto Shield PU forms a tough and flexible membrane which is resistant to a wide range of temperatures, oxidation, radiation and Ultra Violet light.

PRIMARY USESPerma Elasto Shield PU is suitable for use in waterproofing roofs, terraces, podium, multi level car parking, terrace gardens, basements etc. It is highly useful in waterproofing wet areas such as sunk slabs of toilets and bathrooms, built up roofs, masonry and concrete walls, bridge decks, metal and plastic roofs and also repairing old roofs.

ADVANTAGES

• Perma Elasto Shield PU is non toxic hence complies with green building product requirement.
• Perma Elasto Shield PU is a highly elastic product and forms a rubber like membrane which is capable of withstanding severe expansion, contraction and deck movements.
• The membrane remains crack free under severe exposures to oxidation, ozone, UV light and temperature conditions.
• The product has superior wetting and adhesion properties which ensure superior bond with any kind of substrate and helps in getting over peeling problems.
• Perma Elasto Shield PU when applied adapts to any irregular surface forming a waterproof blanket.

DIRECTIONS FOR USESurface to be waterproofed shall be dry, clean, sound and free of all contaminants which may interfere with adhesion or proper curing .The substrates should not contain holes or cracks and should be dust free. All shrinkage cracks shall be treated with suitable material.

Application:Perma Elasto Shield PU is spread at the desired thickness onto the prepared surface. The coating is applied from the container using standard roofing brushes, squeegees or airless spray equipment at the recommended coverage rates on properly cleaned and prepared dry substrates. Application of the Perma Elasto Shield PU system should be done in one complete step to create a smooth uniform self leveling surface without cold joints, lines or streaks. Apply the first coat at the rate of 500 micron thickness. Let it dry fully (approximately 4-6 hours should be waited between two layers), then apply the second coat (500 micron thickness) .Waiting time shortens in hot weather and lengthens in cold weather.Caution:- Do not mix with water and do not apply on moist surfaces. The surface to be applied should be free of moisture.

HEALTH AND SAFETY

• Wear protective clothing, gloves and goggles.
• Skin: Avoid repeated or prolonged contact, if contact occurs , clean with hand cleaner that removes oil or grease , then clean with soap and water.
• Eyes: Contact could cause irritation. If contact occurs , flush with clean water.
• Inhalation: Can cause dizziness. Remove to fresh air and if breathing difficulty persist administer oxygen.

PACKINGPerma Elasto Shield PU is available in 20 kg. packs only.

SHELF LIFEPerma Elasto Shield PU has a shelf life of 12 months if stored in a cool and dry place in original packing from the date of manufacture.

DISCLAIMER

• PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.
• The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
• PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.
• The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.

Are you looking for waterproofing solutions for your residential or commercial area? At Perma Construction Aids Pvt. Ltd. you will get amazing quality products that are loved by all. We all know that water can cause severe damage to your structure and eventually it may collapse someday. By using a solution from our company you can save it from happening and can stay safe and secure.

We are the best water proofing solutions manufacturer, Sarigam, Gujarat. We produce our goods in our company with the use of latest technology and superior quality raw materials. We ensure that there is no unwanted component that can cause a problem.

Thus choose our products and get them delivered at your preferred location. Today our company has become the best waterproofing solutions suppliers in India and abroad.

We are offering waterproofing chemical. perma guard is a polymer modified cementations water proofing system with a very wide scope of applications in water proofing and corrosion inhibition situations. Perma guard is a two component material which forms a flexible reinforced membrane upon curing. Can resist up to 10 bar water pressure. primary use perma guard has been found to perform exceptionally with following applications:

• rcc terrace waterproofing
• sealing leakage through cast iron, asbestos or stoneware pipes
• coating on bridge girders and under deck waterproofing of bridges
• sealing cracks in asbestos cement sheets and sealing 'j' bolt openings
• coating on leaky plaster surfaces
• podium waterproofing
• direction for use
  • clean the area to remove all loose particles, oil, grease and any such deleterious products and wet it with water. If the surface is rough mix perma guard liquid and water in the proportion of 1 :2 and brush apply on pre wet surface
  • mix the powder and liquid ingredients of the product thoroughly to form smooth consistency slurry. Avoid part mixing the ingredients of packing
  • brush applies perma guard slurry on the surface to be treated
  • immediately cover the treated surface with cement sand 1:4 plaster or screed concrete and cure normally
  • when the two components i.e. Liquid and polymer modified cementations powder is mixed a smooth consistency slurry is obtained. This slurry when brush applied on the surface to be treated forms a flexible film which has very strong adhesion to the applied surface. The film is totally waterproof and resistant to chemical and pollution attacks.
    coverage
    • perma guard covers 5 to 7 sq.ft per kg depending upon surface texture
    • perma guard is available in pre-measured (powder +liquid) packs of
      • 1kg
      • 5 kg
      • 10kgs
      • quality assurance should you find the behavior of the product different from the normal feel or the claims with the literature, stop the use of the product, cordon off all such product and inform perma with a complaint letter stating the problem, batch number etc. Lf the product is used in spite of observed variance the responsibility shall be with the user. 12 months from the date of manufacture if stored in a cool, dry place in original packing.