Our Product / Services
By making use of quality packaging material, we pack the entire lot in a safe manner ensuring zero damage at buyer's end. The packing procedure is conducted under the guidance of experts. We are comfortable with traditional payment options as well as the modern ones. Our payment related policies are client friendly. Our payment procedures are transparent, safe, and secure.
Liquid Painting Plant having following items :
Standard Accessories : Face Plate, Two Pin Guide, Three Pin Guide, Two Dead Centres. Electric Motor, Control Panel, Four Jaw Chuck with Back Plate.
Extra Accessories : Splash Guard, Coolant System, Machine Lamp, Revolving Centre, Tapper Turning Attachment, Quick Change Tool Post, Foot Brake, Copying Attachment.
Features :
Standard accessories :
We have one workshop to produce rebar couplers ( parallel thread and taper thread system).( Anchor bolt & rock bolt) So far we have supplied many couplers and threading service to many high-rise building and bridge projects in India https://www.youtube.com/watch?v=f62MvdidcuQ Cutting: 1) The end of the reinforcement bars is swan square. Cold Forging: 2) With the help of patented cold forging, the swan end of the reinforcing bar is then enlarged. With this the core diameter of the bar is increased to pre determined diameter. Threading: 3) An ISO standard metric thread is then cut
Defining as the most reliable Manufacturer, Exporter and Supplier of superior quality Rebar Coupler, we have carved a niche for ourselves. Rebar Coupler and Rebar Splice are such robust structures which are reinforced in concrete in order to improve its tension bearing capacity. Rebar Coupler that we provide is hailed for high mechanical strength, maximum bonding with concrete, minimum dimensions, simple assembly and highest order of safety. Rebar Coupler is widely applied in the process of piling, micro-piling, slip-forming, framework protection, slope protection, etc. Cutting : The end of the reinforcement bars is sawn square. Cold Forging : With the help of cold forging, the sawn end of the reinforcing bar is then enlarged. With this the core diameter of the bar is increased to pre-determined diameter. Threading : An ISO standard metric thread is then cut. Specialties Of Our Rebar Couplers
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : WOODEN BOX
Technical Specifications
Size (mm) | Thread | Diameter (mm) | Length (mm) | MM Pitch | Weight(Kg) |
---|---|---|---|---|---|
12 | M16 | 20 | 30 | 2 | 0.062 |
16 | M20 | 26 | 42 | 2 | 0.082 |
18 | M22 | 29 | 45 | 2.5 | 0.114 |
20 | M24 | 32 | 48 | 2.5 | 0.153 |
22 | M27 | 36 | 54 | 3 | 0.207 |
25 | M30 | 40 | 65 | 3 | 0.303 |
28 | M33 | 44 | 70 | 3 | 0.398 |
32 | M36 | 50 | 78 | 3 | 0.608 |
36 | M39 | 60 | 88 | 3 | 0.875 |
40 | M45 | 62 | 95 | 4 | 1.138 |
Features: Easy to operate, Simple and Stable Structure, Stable Running, Energy Efficient, Hydraulic Feed, Variable Feed, Single Button Operated.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : WOODEN BOX
We are a distinguished Manufacturer, Exporter, and Supplier of Pipe End Facing Machine from Punjab (India). Our Pipe End Facing Machine mainly consists of base, head stock, saddle and clamping vice. Before galvanizing and threading, pipes are chamfered from inner, outer and front face, and deburred with the help of Pipe End Facing Machine. Pipe End Facing Machine helps pipes remain stationery while the facing head of the pipe rotates. For manual chamfering, slide of the pipe moves towards facing head.
Technical Specifications
Model No. | NCT-E-1.1/2" |
---|---|
Min. Dia of Pipe to be Chamfered | 1/2” N.B. Pipe |
Max. Dia of Pipe to be Chamfered | 1.1/2” |
Cutting Tools Required (HSS 10% Cobalt) | 3/8” |
Number of Spindle Speeds | Two Nos. |
Range of Spindle Speeds | 37 to 64 RPM |
Main Motor | 3 H.P., 1440 RPM |
Approx. Wt. of the Machine | 750 Kgs. |
Model No. | NCT-E-4" |
---|---|
Min. Dia of Pipe to be Chamfered | 1/2” N.B. Pipe |
Max. Dia of Pipe to be Chamfered | 4” |
Cutting Tools Required (HSS 10% Cobalt) | 3/8” |
Number of Spindle Speeds | Four Nos. |
Range of Spindle Speeds | 68 to 180 RPM |
Main Motor | 3 H.P., 1440 RPM |
Approx. Wt. of the Machine | 1100 Kgs. |
Technical Specification of Saw Sharpening / Hot Saw / Cold saw Grinding Machines: PCR-50 used for re-sharpening of saw blade with chamfering option on alternate teeth
National Cutting Tools is one of the leading Manufacturers, Exporters and Suppliers of Pipe Beveling Machine. It is used for the purpose of beveling the Pipe End. Pipe is Beveled from the Outer and Front is faced by two different tools. The Pipe remains Stationery and the Beveling Head rotates and comes out of the Head Stock for cutting the Pipe End. It consists of the following:- Bed : The Bed of Pipe Beveling Machine is made of Cast Iron. It is Very Rigid and sturdy in construction so as to take maximum Load and absorb maximum vibrations. It is provided with four Nos. Foundation Holes of Dia M20 at four corners of the bed. It is also provided with Four Tapped holes of 5/8 BSW near the Foundation Holes. The Head Stock and Clamping Vice is fitted on the Bed. Head Stock : he Head Stock body of Pipe Beveling Machine is made of Cast Iron. It is Very rigid and sturdy in design. The Head Stock is designed for Four Nos. Spindle speeds. All the Gears are of helical type made out of Axle Forging. The width of gears is 50 mm. The Shifting Gears slide on Splined Shafts. The Shafts are mounted on Heavy Duty Ball Bearings. The Input Shaft will be provided with a pulley having three grooves for C-Section V-belts. The Main Spindle is mounted on two Taper Roller Bearings mounted in Hard Chrome Plated Ground Sleeve. The Sleeve along with main spindle fitted with Beveling Head is mounted in the Head Stock body and is movable To and Fro along its axis. A Hyd. Cylinder actuated electrically makes the movement of the sleeve in the Head Stock. The Movement of the Sleeve can also be made manually. The Head Stock is Oil Filled. It is provided with Oil Filling hole, Oil Drain hole and Oil Level Indicator. Clamping Vice : The Box Type Clamping Vice is fitted on the Bed. The Vice is provided with Round Clamping Jaws for each size (4, 5, 6, 7, 8, ). The Vice will be Self-centering type. The movement of the Clamping Jaws is made by Pneumatic cylinder fitted on the Vice actuated electrically. The Vice will be very rigid and sturdy in design. Machine will be supplied with single clamping vice. Beveling Head : A special Beveling Head will be provided with the machine. Two Tools of HSS will be used, One for Beveling and second for Root Face. The Beveling Tool will be mounted in a special Spring Loaded Tool Holder with a Roller device. It is fitted on the main spindle that is then mounted in the traveling Sleeve.
Technical Specifications
Model No. | NCT-B- 4" to 8" |
---|---|
Capacity of the machine for Beveling Min. | 4" N.B. Pipe |
Capacity of the machine for Beveling Max. | 8" N.B. Pipe |
Outer Dia of the Sleeve | 200 mm |
Main Spindle Bearings (Taper Roller) | 32218 & 32219 |
Number of Spindle Speeds | Four Nos. |
Cutting Tools Required (HSS 10% Cobalt)or Carbide Tool | 3/4" (Carbide Tool) |
Main Motor | 15 H.P., 960 RPM |
Max. Travel of the Sleeve | 90 mm |
Approx. Wt. Of the machine. | 2800 Kgs. |
Model No. | NCT-B- 6" to 16" |
---|---|
Capacity of the machine for Beveling Min. | 6" N.B. Pipe |
Capacity of the machine for Beveling Max. | 16" N.B. Pipe |
Outer Dia of the Sleeve | 300 mm |
Main Spindle Bearings (Taper Roller) | 32228 & 32226 |
Number of Spindle Speeds | Four Nos. |
Cutting Tools Required (HSS 10% Cobalt) | 1" (Carbide Tool) |
Main Motor | 30 H.P., 960 RPM |
Max. Travel of the Sleeve | 90 mm |
Approx. Wt. Of the machine. | 8000 Kgs. |
We have one workshop to produce rebar couplers ( parallel thread and taper thread system).( Anchor bolt & rock bolt) So far we have supplied many couplers and threading service to many high-rise building and bridge projects in India https:www.youtube.comwatch?v=f62MvdidcuQ Cutting: 1) The end of the reinforcement bars is swan square. Cold Forging: 2) With the help of patented cold forging, the swan end of the reinforcing bar is then enlarged. With this the core diameter of the bar is increased to pre determined diameter. Threading: 3) An ISO standard metric thread is then cut