Other Products / Services #272179

Our wide area network helps us in delivering the products across Ludhiana(India) and other markets. We have with us a well-maintained and capacious storage unit that is facilitated by advanced and automated warehousing system, which is operated and supervised by experts only.

Liquid Painting Plant having following items:1.1.1 Liquid Paint Tanks 1 Nos.1.1.2 Dripping Tray - 1 no1.1.3 Oil Fired Curing oven (Straight Type) 1 Nos.1.1.4 Overhead Motorized Conveyor, with support Structure 1 Set.1.1.5 Electrical Control Panel 1 Set.1.1.6 Painting, and Finishing etc. 1 Lot.

By making use of quality packaging material, we pack the entire lot in a safe manner ensuring zero damage at buyer's end. The packing procedure is conducted under the guidance of experts. We are comfortable with traditional payment options as well as the modern ones. Our payment related policies are client friendly. Our payment procedures are transparent, safe, and secure.

 

Liquid Painting Plant having following items :

• Liquid Paint Tanks – 1 Nos.
• Dripping Tray - 1 no
• Oil Fired Curing oven (Straight Type) – 1 Nos.
• Overhead Motorized Conveyor, with support Structure – 1 Set.
• Electrical Control Panel – 1 Set.
• Painting, and Finishing etc. – 1 Lot.

Standard Accessories : Face Plate, Two Pin Guide, Three Pin Guide, Two Dead Centres. Electric Motor, Control Panel, Four Jaw Chuck with Back Plate.

 

Extra Accessories : Splash Guard, Coolant System, Machine Lamp, Revolving Centre, Tapper Turning Attachment, Quick Change Tool Post, Foot Brake, Copying Attachment.

Features :

• Duly seasoned alloyed high duly castings
• Sturdy construction to ensure vibration-free working
• Ram alignment with taper lib strip
• Extensive lubrication arrangements
• Alloy steels shafts
• All alignments maintained as pet geometric alignment test IS : 2310-1963
• Unrversal/tixed table with variable
• automatic feeds on horizontal
• traverse.
• Expanding ring type clutch drive
• in all-geared machines to
• eliminate slippage
• Graduated tool slide swivelling
• 90 degrees either way
• Interchangeability of parts
• ensured through standardisation
• and quality control
• Accuracy and performance guaranteed.

Standard accessories :

• Swivelling Vice, Allen Key Set. V-Belts, Crank Handle, Spanner Set, Screw Orlver, Oil Can. Motor Pulley. Tool Box.
• Extra accessories1 Electric Motor
• Dol Starter
• Key way cutting attachment
• Automatic tool lilting device
• Automatic feed to the tool slide
• Automatic lubricating pump
• Rapid feed system with Control Panel

Prod. 1401A. Universal Electric Pipe & Bolt Threading(With standard Accessories One RIDGID Die Head 1/2" - 2"and Dies Size 1/2" - 3/4 & 1" - 2" BSPT for Pipe onlywith Foolt Control)

We have one workshop to produce rebar couplers ( parallel thread and taper thread system).( Anchor bolt & rock bolt) So far we have supplied many couplers and threading service to many high-rise building and bridge projects in India https://www.youtube.com/watch?v=f62MvdidcuQ Cutting: 1) The end of the reinforcement bars is swan square. Cold Forging: 2) With the help of patented cold forging, the swan end of the reinforcing bar is then enlarged. With this the core diameter of the bar is increased to pre determined diameter. Threading: 3) An ISO standard metric thread is then cut

Defining as the most reliable Manufacturer, Exporter and Supplier of superior quality Rebar Coupler, we have carved a niche for ourselves. Rebar Coupler and Rebar Splice are such robust structures which are reinforced in concrete in order to improve its tension bearing capacity. Rebar Coupler that we provide is hailed for high mechanical strength, maximum bonding with concrete, minimum dimensions, simple assembly and highest order of safety. Rebar Coupler is widely applied in the process of piling, micro-piling, slip-forming, framework protection, slope protection, etc. Cutting : The end of the reinforcement bars is sawn square. Cold Forging : With the help of cold forging, the sawn end of the reinforcing bar is then enlarged. With this the core diameter of the bar is increased to pre-determined diameter. Threading : An ISO standard metric thread is then cut. Specialties Of Our Rebar Couplers

• Technically Perfect :Concrete structures need to be reinforced to improve their load bearing capacity and our Rebar Couplers are perfectly designed for that. Our Rebar Couplers impart unmatched mechanical strength to the RCC structures thus ensuring complete safety even in the rugged conditions of seismic activity. The continuity of our Rebar Couplers allows for grounding electrical current.
• Flawless Design :Rebar Couplers, offered by us, are exemplary for their flawless design that allows better concrete flow and consolidation while at the same time reducing rebar congestion. Such designing minimizes reinforcement fixing errors and offers greater flexibility in structuring RCC.
• Simple Installation :Simple mechanical ways are adopted for installation of Rebar Couplers. The simplicity of the installation process saves significant amount of time and labor. The benefits are immediately reflected in the reduced costs of the construction project.
• Installation Of Rebar Couplers :
  • Good quality shear cut bars with sharp perpendicular cutting or saw cutting may be used. The threading is provided on bar ends with proprietary branded threading equipment and thread cutting tools.
  • Threading of reinforcement bars must be carried out as per NCT RE-BAR COUPLERS by trained operator. The thread checking gauge is used for checking the threads. The threads shall be covered by thread protection plastic cap while storing.
  • The bent bars may be threaded on threading machine provided straight length of the bent bar-end to be threaded is more than 0.5 m. If not so, the bars may be threaded in straight lengths, connected thoroughly and bar bending is carried out subsequently. The bent must be minimum 100mm apart from thread bar end.
  • The bar is connected to coupler sleeve initially by hand tightening and then with pipe wrench.
  • The NCT RE- BAR Couplers full strength threaded butt joining that achieves strength with fully engaged threading of coupler and reinforcement bars. Therefore, it is essential to ensure adequate tightening of joining connection for effective load transfer.

complete machinery for scaffolding. we can offer you the complete scaffolding machinery 1) Thread Rolling Machine For Prop And Jack Model No. NCT3R-75Out Side Diameter 32-75 mmThread Length in Feed 75 mm (3")Work Range Thread Length Through Feed: IndefiniteMax. Out Side Dia.170 MM Max. in Side Dia.80 MMMotor For Roll Spindle:7.5 H.P.Motor For Hydraulic System 3 H.P.3 Phase ACMotor For Coolant Pump .0.1 H.P Note: One set of Thread roll fitted on the machines Spare thread roll will be provided on extra cost as per requirement 2) Multi-Spindle drilling machineAs per the features list attached. (14 spindle standard m/c.) Features of the Multi-Spindle Drilling Machine Specially designed for Scaffolding pipes drilling operation.1. Machine will have the capacity to load 40 NB, 2000mm length pipes, for auto mode and 3000mm in semi auto mode2. Drilling Pitch will be 120mm Please note that our machine has 14 spindles fixed in particular pitch. They are not adjustable. If any change in, pitch and no of holes to be drilled, is required please specify in your enquiry.3. For Drill height adjustment-adjustable Sleeves Type A Din 6327 with MT-2 Taper will be provided. (Max drill size 17.5 mm with MT2 taper shank)4. Machine will be equipped with automatic loading of the pipe from loading table to the V-Block for drilling.5. Machine will have Manual/semi-auto and Automatic Mode Selection in operation. In manual mode, individual functions of the machine can be operated manually during initial machine setup. After machine setup is completed, it can be run in Semi auto or Automatic-mode by selecting Semi auto or Auto Mode. Automatic cycle sequence is as below.Positioning of the pipeClamping of the pipeSlide up with rapid movement till the drill point.Coolant ON & Slide up with feed movement to drill the pipe on one 3) Scaffolding Base Jack welding Machine for Base plates U-base etc With Mig Welding Machine 380-415

NCT CHASERS for chasing grooves in segments/rolls are also made from M 15 steel and manufactured to the exacting standards required by the Tea Industry. These are available with 6 TPI , 8 TPI or 10 TPI in"U" and "V" profiles. Optimum combination of microstructure, grain size and hardness are ensured in heat treatment for durable performance. On specific demand, cutter / chasers are also made from AISI M-2 / M-35 / M-42 and others HSS grades of customers choice. Material Size T P I Profile Inclusive AngleHSS M-15 (SUP) 2" x " x 4" 8 or 10 U or V 55 or 45HSS M-15 (SUP) 2" x " x 4" 8 or 10 U or V 55 or 45HSS M2 2."x "x 4" 8 or 10 U or V 55HSS M2 2" x " x 4" 4 or 6 U or V 55HSS M2 1" x " x 4" 8 or 10 U or V 55

Hydraulic Thread Rolling Machine three roll type Model NCT3R-75 Complete with electrical, Coolant system, With one set roll fitted.Model No. NCT3R-75Out Side Diameter 32-75 mmThread Length in Feed 75 mm (3")Work Range Thread Length Through Feed:IndefiniteMax. Out Side Dia.170 MM Max. in Side Dia.80 MMMotor For Roll Spindle:7.5 H.P.Motor For Hydraulic System 3 H.P.3 Phase ACMotor For Coolant Pump .0.1 H.P

H.S.S Tool Bitss in two versatile grades of High Speed Steel, M-2 and M-34, bits and blades are ground on all sides and ready for use.Packaged for convenient handling. Each tool is clearly marked with size and product number.

Re-Bar Couplers are developed to be a aspect of the encouragement cafes. The traditional method of linking encouragement cafes with lap combined parts a continual in strengthened tangible need not be always appropriate. Advantages of convenience and economic system in lap splicing is limited to small size cafes.

We are a celebrated Manufacturer, Exporter, and Supplier of Tangential Chaser from Punjab (India). Manufactured from metallurgical standard proven imported high speed steel, these Tangential Chasers are designed according to the international threading standard. Available in the length range from 1" to 6" according to the size of the die head, these Tangential Chasers help in the cutting of BSP, BSPT, NPT, UNF, UNC, BSW threads. Tested and manufactured in automatic imported heat treatment plant using imported testing equipments, these interchangeable Tangential Chasers have high efficiency.

Features: Easy to operate, Simple and Stable Structure, Stable Running, Energy Efficient, Hydraulic Feed, Variable Feed, Single Button Operated.

 

Acquiring our premium and high-grade range of product is hassle free as our organization is located in Ludhiana(India), which is easily accessible by road, rail, and air. We are flexible in making deliveries in the committed time span owing to the well-organized and maintained transportation system.

Capacity in tons=50 tonsBed size(inches)=18x20Bed to Ram(inches)=12Bed Bore(inches)=6Gear Dia(inches)=26Fly Wheel Dia(inches)=32Crank Shaft Dia(inches)=4.3/4Back Shaft Dia(inches)=3.1/8Stroke(inches)=3.1/2Hole in Ram for Die Clamping(inches)=1.5No. of Stokes(inches)=60Pully Size(inches)=7Total Height(inches)=85Motor Required=5 H.P. Capacity in tons=75 tonsBed size(inches)=20x22Bed to Ram(inches)=14Bed Bore(inches)=7Gear Dia(inches)=30Fly Wheel Dia(inches)=36Crank Shaft Dia(inches)=5.5Back Shaft Dia(inches)=3.5Stroke(inches)=4Hole in Ram for Die Clamping(inches)=1.3/4No. of Stokes(inches)=56Pully Size(inches)=7Total Height(inches)=91Motor Required=5 H.P. Capacity in tons=100 tonsBed size(inches)=22x24Bed to Ram(inches)=16Bed Bore(inches)=8Gear Dia(inches)=34Fly Wheel Dia(inches)=39Crank Shaft Dia(inches)=6.5Back Shaft Dia(inches)=4Stroke(inches)=4.5Hole in Ram for Die Clamping(inches)=2No. of Stokes(inches)=53Pully Size(inches)=7Total Height(inches)=98Motor Required=7.5 H.P. Capacity in tons=150tonsBed size(inches)=24x26Bed to Ram(inches)=18Bed Bore(inches)=9Gear Dia(inches)=38Fly Wheel Dia(inches)=42Crank Shaft Dia(inches)=7.5Back Shaft Dia(inches)=4.3/4Stroke(inches)=5Hole in Ram for Die Clamping(inches)=2No. of Stokes(inches)=50Pully Size(inches)=7Total Height(inches)=109Motor Required=10 H.P. Capacity in tons=200tonsBed size(inches)=28x30Bed to Ram(inches)=20Bed Bore(inches)=10Gear Dia(inches)=42Fly Wheel Dia(inches)=48Crank Shaft Dia(inches)=8.1/4Back Shaft Dia(inches)=5Stroke(inches)=5.5Hole in Ram for Die Clamping(inches)=2.1/4No. of Stokes(inches)=46Pully Size(inches)=7Total Height(inches)=117Motor Required=15H.P.

We are a distinguished Manufacturer, Exporter, and Supplier of Pipe End Facing Machine from Punjab (India). Our Pipe End Facing Machine mainly consists of base, head stock, saddle and clamping vice. Before galvanizing and threading, pipes are chamfered from inner, outer and front face, and deburred with the help of Pipe End Facing Machine. Pipe End Facing Machine helps pipes remain stationery while the facing head of the pipe rotates. For manual chamfering, slide of the pipe moves towards facing head.

Technical Specification of Saw Sharpening / Hot Saw / Cold saw Grinding Machines: PCR-50 used for re-sharpening of saw blade with chamfering option on alternate teeth

FeaturesMaterial : HSSStandard : Factory standard or according to requests REAMERS : A general purpose Reamer that is used in a variety of applications and materials. These are available in a variety of different styles such as Straight Shank, Taper Shank, and Stub Screw Machine.

Scaffolding Welding Cuplock and Ring Lock Product Description:With assistance from highly qualified and experienced professionals, we are occupied in offering a wide range of Scaffolding Welding Cuplock And Ring Lock. Offered array is designed by our experts using quality proven raw material and ultra modern technology in tune with the global quality norms. Provided cup lock and ring lock is available in diverse specifications and widely renowned for its superb features. Features: Corrosion resistanceSturdinessPrecision-designed Specifications: Item Unit Cuplock Ring LockSupply v 220Phase Nos. SINGLEFrequency Hz. 60Speed RPM 2 to 10Motor Drive TYPE AC InverterMotor TYPE 3-PhaseTorch Clamping TYPE PNEUMATICLength Adjustability mm 150 to 2400Dimensions LxWxH 11.3 x 2.5 x 5.3 (Foot)Yes! I am interested

National Cutting Tools is one of the leading Manufacturers, Exporters and Suppliers of Pipe Beveling Machine. It is used for the purpose of beveling the Pipe End. Pipe is Beveled from the Outer and Front is faced by two different tools. The Pipe remains Stationery and the Beveling Head rotates and comes out of the Head Stock for cutting the Pipe End. It consists of the following:- Bed : The Bed of Pipe Beveling Machine is made of Cast Iron. It is Very Rigid and sturdy in construction so as to take maximum Load and absorb maximum vibrations. It is provided with four Nos. Foundation Holes of Dia M20 at four corners of the bed. It is also provided with Four Tapped holes of 5/8 BSW near the Foundation Holes. The Head Stock and Clamping Vice is fitted on the Bed. Head Stock : he Head Stock body of Pipe Beveling Machine is made of Cast Iron. It is Very rigid and sturdy in design. The Head Stock is designed for Four Nos. Spindle speeds. All the Gears are of helical type made out of Axle Forging. The width of gears is 50 mm. The Shifting Gears slide on Splined Shafts. The Shafts are mounted on Heavy Duty Ball Bearings. The Input Shaft will be provided with a pulley having three grooves for C-Section V-belts. The Main Spindle is mounted on two Taper Roller Bearings mounted in Hard Chrome Plated Ground Sleeve. The Sleeve along with main spindle fitted with Beveling Head is mounted in the Head Stock body and is movable To and Fro along its axis. A Hyd. Cylinder actuated electrically makes the movement of the sleeve in the Head Stock. The Movement of the Sleeve can also be made manually. The Head Stock is Oil Filled. It is provided with Oil Filling hole, Oil Drain hole and Oil Level Indicator. Clamping Vice : The Box Type Clamping Vice is fitted on the Bed. The Vice is provided with Round Clamping Jaws for each size (4, 5, 6, 7, 8, ). The Vice will be Self-centering type. The movement of the Clamping Jaws is made by Pneumatic cylinder fitted on the Vice actuated electrically. The Vice will be very rigid and sturdy in design. Machine will be supplied with single clamping vice. Beveling Head : A special Beveling Head will be provided with the machine. Two Tools of HSS will be used, One for Beveling and second for Root Face. The Beveling Tool will be mounted in a special Spring Loaded Tool Holder with a Roller device. It is fitted on the main spindle that is then mounted in the traveling Sleeve.

We offer a wide collection of Tangential chaser such as thread cutting chaser, pipe threading chaser, bolt threading chaser and rod threading chaser. We stand amid the well known steel tangential chasers suppliers in India. We are specialized NCT threading tangential chaser manufacturer. This Threading Tangential Chaser is manufactured from metallurgical standard proven imported high speed steel. These NCT Threading Tangential Chasers are designed as per international threading standard, which assist us in manufacturing natural and fine threads. These Landis tangential chasers are available in various lengths ranging from 1 to 6depending on the size of the die head. BSP, BSPT, NPT, UNF, UNC, BSW threads that can be excellently and easily be cut on this tangential chaser. NCT Tangential Chasers are manufactured from imported High Speed Steel which must pass exacting metallurgical standard. Experienced heat treatment with the automatic imported heat treatment plant and imported Testing equipments, assures that they will perform satisfactorily in service and produce quality threads within the tolerance for which they ware intended. NCT Chaser are interchangeable. If one Pc. Of a chaser set is damaged & is beyond use. Then same No. pc. Of the other chaser set lying in stock may be used and there will not be any difference in threading performance and the damaged set can be replaced without the necessity of replacing entire set. Die-Head SizeHolder Set/Sets (Provided)Chaser Section1/4" to 1"1/4" to 1"3" x 1.3/64 (Set of 4 Pcs)3/8" to 1. 1/2"3/8" to 1. 1/2"4" x 1.3/64 (Set of 4 Pcs)1/2" to 2.1/2"1/2" to 1. 1/2" & 1.5/8 to 2.1/2"4" x 1.1/4" (Set of 4 Pcs)1" to 4"1" to 2" 2.1/2" to 4"4" x 1.1/4" (Set of 4 Pcs)5" x 2.1/4" (Set of 4 Pcs)2.1/2" to 6"2.1/2" to 3" 3.1/2" to 4"4.1/2" to 6"5" x 2.1/4" (Set of 6 Pcs)4" to 8"4" to 5.1/2"5.1/2" to 8"5" x 2.1/4" (Set of 6 Pcs)

This is a motorised model Hydraulic control Hacksaw Machine. It is equipped with feed control device, automatic lifting and lowering arrangement of saw frame with mechanical coolant pump, vice and machine belt guard. Hydraulic Control Hacksaw Machine is supplied complete with suuitable HP AC Electric motor, on-off Starter and V belts. The machine is available in different capacities from 175 mm round bar upto 600 mm round bar cutting capacity. The higher capacity machines are supplied with double cylinder Hydraulic system.

Product Specification Square Tool Bits : M-2 H.S.S Available in two versatile grades of High Speed Steel, M-2 and M-34, bits and blades are ground on all sides and ready for use. Packaged for convenient handling. Each tool is clearly marked with size and product number. Steel Analysis M-2 Tungsten Moly High Speed Steel : Carbon, 84%, Manganese, 25%, Silicon, 30%, Tungsten, 6.40%, Chromium, 4.15%, Vanadium 1.90%, Molybdenum, 5.00%. M-34 Cobalt High Speed Steel : Carbon, 90%, Manganese, .30%, Silicon 30%, Tungsten, 1.55%, Chromium, 3.75%, Vanadium 2.00%, Molybdenum 8.70%, Cobalt 8.00%.

Square Tool Bits, M-2 H.S.S Available in two versatile grades of High Speed Steel, M-2 and M-34, bits and blades are ground on all sides and ready for use.Packaged for convenient handling. Each tool is clearly marked withsize and product number.

We are offering rebar coupler and bar threading service at site in delhinational cutting tools are suppliers of concrete reinforcing materials to the construction industry rebar upsetting technology: cutting: 1) the end of the reinforcement bars is swan square. cold forging: 2) with the help of patented cold forging, the swan end of the reinforcing bar is then enlarged. With this the core diameter of the bar is increased to pre determined diameter. Threading:3) an iso standard metric thread is then cut

We are reckoned among the best roll threading die head manufacturers in india. Threading die head manufactured by us is passed through stringent heat treatment in our advanced imported treatment plant. This threading die head is available in assortment of types with us such as pipe threading die head, bar threading die head, bolt threading die head and rebar threading die head. These threading die heads are efficient enough to give high performance in loner use. We facilitate our clients by providing easy accessibility of these threading die heads at most reasonable prices. 14 t0 1 capacity pipe & bolt 38 to 1.12 do-12 t0 2.12 do-1 to 4 do-2.12 to 6 do-4 to 8 do-

complete machinery for scaffolding. we can offer you the complete scaffolding machinery 1) Thread Rolling Machine For Prop And Jack Model No. NCT3R-75Out Side Diameter 32-75 mmThread Length in Feed 75 mm (3")Work Range Thread Length Through Feed: IndefiniteMax. Out Side Dia.170 MM Max. in Side Dia.80 MMMotor For Roll Spindle:7.5 H.P.Motor For Hydraulic System 3 H.P.3 Phase ACMotor For Coolant Pump .0.1 H.P Note: One set of Thread roll fitted on the machines Spare thread roll will be provided on extra cost as per requirement 2) Multi-Spindle drilling machineAs per the features list attached. (14 spindle standard m/c.) Features of the Multi-Spindle Drilling Machine Specially designed for Scaffolding pipes drilling operation.1. Machine will have the capacity to load 40 NB, 2000mm length pipes, for auto mode and 3000mm in semi auto mode2. Drilling Pitch will be 120mm Please note that our machine has 14 spindles fixed in particular pitch. They are not adjustable. If any change in, pitch and no of holes to be drilled, is required please specify in your enquiry.3. For Drill height adjustment-adjustable Sleeves Type A Din 6327 with MT-2 Taper will be provided. (Max drill size 17.5 mm with MT2 taper shank)4. Machine will be equipped with automatic loading of the pipe from loading table to the V-Block for drilling.5. Machine will have Manual/semi-auto and Automatic Mode Selection in operation. In manual mode, individual functions of the machine can be operated manually during initial machine setup. After machine setup is completed, it can be run in Semi auto or Automatic-mode by selecting Semi auto or Auto Mode. Automatic cycle sequence is as below.Positioning of the pipeClamping of the pipeSlide up with rapid movement till the drill point.Coolant ON & Slide up with feed movement to drill the pipe on one 3) Scaffolding Base Jack welding Machine for Base plates U-base etc With Mig Welding Machine 380-415

We have one workshop to produce rebar couplers ( parallel thread and taper thread system).( Anchor bolt & rock bolt) So far we have supplied many couplers and threading service to many high-rise building and bridge projects in India https:www.youtube.comwatch?v=f62MvdidcuQ Cutting: 1) The end of the reinforcement bars is swan square. Cold Forging: 2) With the help of patented cold forging, the swan end of the reinforcing bar is then enlarged. With this the core diameter of the bar is increased to pre determined diameter. Threading: 3) An ISO standard metric thread is then cut