GST : 03AAFFN1688L1Z1
4.6/5
Our Products
Our product range contains a wide range of Multipurpose Bending Press, C Frame Power Press, Pillar Type Power Press and Power Press
Specifications
| JOBS | AMTC – 400 | AMTC – 500 | AMTC – 600 |
|---|---|---|---|
| Angle Cutting | 100 x 100 | 125 x 125mm | 150 x 150mm |
| Flat bar cutting | 16 x 250mm | 20 x 300mm | 20 x 350 mm |
| Round Bar Cutting | 40mm | 50 mm | 50mm |
| Channel Cutting | 100mm | 75 x 40 100 x 50mm | 100 x 50, 150 x 75 mm |
| Bending Die | -- | -- | 850 x 5mm |
| Electric Motor | 3 Hp 1440RPM | 5 Hp 1440 RPM | 7.5 HP 960 RPM |
Technical Specifications
| Model NCT-C | 5 Ton | 10 Ton | 20 Ton | 30 Ton | 50 Ton | 75 Ton | 100 Ton | 150 Ton | 200 Ton | 250 Ton | 300 Ton |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Bed Size | 10" x 17" / 254" x 430" | 13"-19"/ 330 x 482 | 14½" x 22" / 368" x 560" | 16"-26"/ 406 x 660 | 20" x 30" / 508" x 762" | 16"-26"/ 406 x 660 | 27" x 37" / 685" x 940" | 29"x 40"/ 735 x 1015 | 32"x 48"/ 812 x 1220 | 32" x 32" / 685" x 940" | 34"x 34"/ 812 x 1220 |
| Bed to Ram | 9"/230 | 10"/254 | 11"/280 | 12"/305 | 13"/330 | 12"/305 | 17"/430 | 19"/480 | 20"/510 | 22"/560 | 24"/610 |
| Bed Bore | 3½" / 90 | 4" / 100 | 4½" / 115 | 5" / 127 | 6" / 150 | 5" / 127 | 8½" / 200 | 9½" / 225 | 10½" / 265 | 11" / 280 | 12" / 305 |
| Gear Dia | 16" / 405 | 18" / 457 | 22" / 560 | 24" / 610 | 26" / 660 | 24" / 610 | 34" / 865 | 38" / 965 | 42" / 1065 | 48" / 1220 | 54" / 1370 |
| Fly Wheel Dia | 19" / 482 | 21" / 533 | 25" / 635 | 28" / 710 | 32" / 812 | 28" / 710 | 39" / 990 | 42" / 1065 | 48" / 1220 | 52" / 1320 | 58" / 1475 |
| Crank Shaft Dia | 2¾" / 70 | 3" / 75 | 3½" / 90 | 4" / 100 | 4¾" / 118 | 4" / 100 | 6½" / 106 | 7½" / 190 | 8¼" / 210 | 9" / 230 | 10" / 255 |
| Back Shaft Dia | 2¼" / 55 | 2¼" / 55 | 2½" / 65 | 2¾" / 70 | 3½" / 80 | 2¾" / 70 | 4" / 100 | 4¾" / 118 | 5" / 125 | 5½" / 140 | 6" / 150 |
| Stroke | 2" / 50 | 2¼" / 55 | 2½" / 65 | 3" / 75 | 3½" / 90 | 3" / 75 | 4½" / 115 | 5" / 125 | 6" / 150 | 6" / 150 | 6½" / 165 |
| Hole in Ram Dia Clamping | 1" / 25 | 9/8" / 28 | 1½" / 32mm | 13/8" / 35mm | 1½" / 38mm | 13/8" / 35mm | 2" / 50mm | 2¼" / 55mm | 2½" / 60mm | 2½" / 65mm | 2½" / 5mm |
| No. of Stokes | 80 | 76 | 70 | 60 | 55 | 60 | 53 | 50 | 50 | 40 | 38 |
| Pully Size | 5" | 5" | 6" | 6" | 6" | 6" | 7" | 7" | 8" | 7" | 8" |
| Total Height | 56" | 64" | 71" | 76" | 82" | 76" | 94" | 102" | 102" | 128" | 104" |
| Motor Requirement | 1 H.P | 1H.P | 2 H.P | 3 H.P | 5 H.P | 5 H.P | 7½ H.P | 10 H.P | 15 H.P | 20 H.P | 30 H.P |
| Floor to Top of Bed | 27" | 28" | 29" | 30" | 30" | 30" | 30" | 30" | 30" | 30" | 30" |
Rolling Key : Is fitted in the two parts of EN-34 alloy steel duty tempered and property ground and give a perfect service. All are being taken that the key may not break and is suitable to stand the jerks. Alignment : Heighest degree of precision maintained during the fitting of ram and it's base is checked very property on 90 angel with the dail indicator. Horizontally & Perpendicularly. Body : The press bodies are manufactured out of the close grain casting and steel fabricated as well.
Specifications
| Capacity in Tones | 10 Ton | 20 Ton | 30 Ton | 50 Ton | 75 Ton | 100 Ton | 150 Ton | 200 Ton | 250 Ton | 300 Ton |
|---|---|---|---|---|---|---|---|---|---|---|
| Bed Size | 12" x 14" | 14" x 16" | 16" x 18" | 18" x 20" | 20" x 22" | 22" x 24" | 24" x 26" | 28" x 30" | 32" x 32" | 34" x 34" |
| Bed to Ram | 9" | 10" | 11" | 12" | 14" | 16" | 18" | 20" | 22" | 24" |
| Bed Bore | 4" | 4½" | 5" | 6" | 7" | 8" | 9" | 10" | 11" | 12" |
| Gear Dia | 18" | 22" | 24" | 26" | 30" | 34" | 38" | 42" | 48" | 54" |
| Fly Wheel Dia | 21" | 25" | 28" | 32" | 36" | 39" | 42" | 48" | 52" | 58" |
| Crank Shaft Dia | 3" | 3½" | 4" | 4¾" | 5½" | 6½" | 7½" | 8¼" | 9" | 10" |
| Back Shaft Dia | 2¼" | 2½" | 2¾" | 3½" | 3½" | 4" | 4 3/4 | 5" | 5½" | 6" |
| Stroke | 2¼" | 2½" | 3" | 3½" | 4" | 4½" | 5" | 5½" | 6" | 6½" |
| Hole in Ram for Die Clamping | 1" | 1¼" | 1¼" | 1½" | 1 3/4 | 2" | 2" | 2¼" | 2½" | 2½" |
| No. of Stokes | 76" | 66" | 58" | 60" | 56" | 53" | 50" | 46" | 40" | 38" |
| Pully Size | 5" | 6" | 7" | 7" | 7" | 7" | 7" | 7" | 7" | 8" |
| Total Height | 65" | 72" | 78" | 85" | 93" | 98" | 109" | 117" | 128" | 104" |
| Motor Required | 1 H.P. | 2 H.P. | 3 H.P. | 5 H.P. | 5 H.P. | 7½ H.P. | 10 H.P. | 15 H.P. | 20 H.P. | 30 H.P. |
Ms. Pritpal Kour & Mr. Maninder Singh (National Cutting Tools)
30 - Partap Colony Model Gram., Ludhiana, Punjab - 141003, India
https://www.threadingmachines-nct.com
Share us via
