Our Products
Salient Features & Application :
Size Chart
Description | B.S. Mesh | Micron Size |
---|---|---|
Coarse I `O’ | -18+25 | 600-800 |
Coarse II ‘BL’ | -18+60 | 400-600 |
Medium `C’ | -36+60 | 250-425 |
Fine `AD’ | -72+150 | 106-212 |
Superfine I `AF’ | -100+200 | 75-150 |
Superfine II `AQ’ | -300+350 | 04-45 |
Urea Plastic Blast Media is a plastic grain stripping abrasive used in sandblasting operations. It is the most widely used plastic media. Urea Plastic Abrasive Grit is environmentally friendly and recyclable – an alternative to chemical stripping. Urea Plastic Abrasive Grit is formulated to meet an increased level of stripping performance where stripping speed outweighs other considerations. Urea Plastic Abrasive Grit is able to strip tough coatings with an impressive strip rate. Urea Plastic Abrasive Grit is typically used for less sensitive applications.
Benefits :
Applications :
Features :
Applications :
Details :
Details
Color | Maximum WPR | Typical Applications | Best Used With These Materials | Tip Guard |
---|---|---|---|---|
Black | 4050 psi (280 bar, 280 bar, 28.0 Mpa) | Residential, Commercial or Industrial | Lacquers to Mastices Latex Paints | RAC 5 Hand tite Tip Guard (243161) |
Details :
Details
Tip Guards | Part #s | Thread Sizes | Guns | Tips |
---|---|---|---|---|
RAC x HandTite | 246215 | 7/8 in (22 mm) | Standard Graco Thread | RACx, FFT, WR |
To maximize performance, choose BlueMax II high performance airless hose. With superior flexibility and durability, BlueMax II is designed to ensure you get the best results from your airless sprayer.
Feel the Difference :
Details
Description | Part Number | Diameter | Length |
---|---|---|---|
BlueMax II Hose | 240794 | 64. mm (1/4 in) | 15 m (50 ft) |
BlueMax II Hose | 240797 | 9.5 mm (3/8 in) | 15 m (50 ft) |
Details
Color | Maximum WPR | Typical Applications | Best Used With These Materials | Tip Guard |
---|---|---|---|---|
Blue | 4050 psi (280 bar, 280 bar, 28.0 Mpa) | Residential, Commercial or Industrial | Lacquers to Mastices Latex Paints | RACx Hand tite Tip Guard (246215) |
Turbine Pneumatic Stirrer Series :
Construction :
Stirrer classication :
Available Turbine blade sizes :
Enclosure :The modular blast room is specially ventilated and illuminated for enclosed abrasive blasting, and is a fully sealed, dust tight, all steel structure. The components are prefabricated for simple bolt-together erection, with little or no job site welding required. The enclosure stands by it’s own structural support without connections to the surrounding facilities. Internally, the enclosure has no areas, other than the floor, where airborne media or dust may be captured. The size of the enclosure depends on :
Single Screw Partial Reclaim System :
H Shaped Partial Reclaim System :
U Shaped Partial Reclaim System :
Full Floor Reclaim System :
Recovery Systems :
All abrasive recovery system include three basic functions :
Mechanical Recovery : Consists of Bucket Elevator, Abrasive Cleaner & Screw Conveyor System
Pneumatic Recovery :
Scrapper Floor Recovery :
Air Ejector Recovery System : Air Ejector type Recovery is a low cost abrasive recovery system in which abrasive is swept manually in a corner & fed in the feed hopper. From the feed hopper air-operated, air-injector by a respiratory pipe forces the abrasive into separator drum through elevator pipe. Fine dust from the abrasive is separated in and usable media with fine particles of abrasive passed through fine screen separator. In fine screen separator the fine abrasive particle get filtered out and usable media transferred into pressure tank for reuse.
Applications and Salient Features :
Details :
Technical Specification
Details | Pass Blast IPBT-181 | Roto Blast IRBT-196A | Roto Blast IRBT-196B | Roto Blast IRBT-196C |
---|---|---|---|---|
Nozzle Size mm | 12.5 | 6 | 8 | 10 |
No of Nozzles | 1 | 2 | 2 | 2 |
Compressed air requirement cfm at psi | 200 | 250 | 365 | 600 |
Pipe ID can be clened mm | 51-305 | 165-254 | 254-600 | 600-914 |
Dim,ension mm | 230X110X610 | 180X180X880 | 180X180X880 | 180X180X880 |
Net Wt. Kg, | 5 | 15 | 15 | 15 |
Features :
Lazer IV 3900/ 5900 Details :
Line Driver/ Line Driver HD Details :
Pole Gun Extensions - Maximum WPR: 3800 psi, (248 bar, 24.8 MPa) :
RAC X Tip Extensions - Maximum WPR: 4050 psi, (280 bar, 28.0 MPa) :
ultra cordless airless hand held disinfectant spray equipment ne0333m
Additional Information:
Payment Terms :
Delivery Time : 7 TO 10 DAYS
The range is suitable for transferring paint materials, oils, explosive liquids, feed multiple spray guns
and paint circulation system. It is designed for high delivery up to 16 ltrs/ min.
FEATURES:
Specification Table
CUB | Four Ball Type CUB |
---|---|
Type | CUB 2.240 |
Ration | 2:1 |
Output Per Cycle | 240 CC |
Air Motor Piston | 80 MM |
Stroke Length | 70 MM |
Recommended Spray Volume @25 cycles per minute | 6 Ltrs |
Air Inlet Pressure (max.) | 6 Bar |
Output Pressure (max.) | 12 Bar |
Air Consumption Ltrs/ min. @25 cycles/ min. | 106 |
Salient Features & Application :
Aluminium Oxide - Virgin
Abrasive Material | - Corundum (Virgin Grade) |
---|---|
Aluminium Oxide Content | - 90% min. |
Hardness on MOH Scale | - 09 min. |
Specific Gravity | - 3.9 min. |
Aluminium Oxide - Commercial
Abrasive Material | -Emery, Synthetic (Commercial Quality) |
---|---|
Aluminium Oxide Content | - 60% min. Magnetic Material 15% Max. |
Hardness on MOH Scale | - 08 min. |
Specific Gravity | - 3.6 min. |
Size Chart
IS Grit | Particle Size Range (mm) | Equivalent BS Sieve Range | Rentention Min. By |
---|---|---|---|
16 | 1.40-1.00 | 14-16 | 50% |
20 | 1.00-0.710 | 18-22 | 50% |
24 | 0.710-0.425 | 25-36 | 50% |
36 | 0.500-0.300 | 36-52 | 50% |
60 | 0.355-0.180 | 60-85 | 50% |
80 | 0.250-0.150 | 72-100 | 50% |
100 | 0.212-0.125 | 85-120 | 50% |
120 | 0.180-0.106 | 100-150 | 50% |
220 | 0.090-0.045 | 240-350 | 50% |
Other Impurities
SiO2 | 1.00% Max. |
---|---|
CaO | 1.00%Max. |
Fe2O3 | 0.50%Max. |
TiO2 | 2.2.-3.0% |
Free Iron | 0.40% Max |
Available in the following sizes (inches) :
Features :
Technical Specification
Type | 30.150D | 35.275D | 40.110D | 55.275D | 75.210D |
---|---|---|---|---|---|
Ratio* | 30:1 | 35:1 | 40:1 | 55:1 | 75:1 |
Output Per Cycle | 150cc | 275cc | 110cc | 275cc | 210cc |
Air Motor Piston | 160 mm | 250 mm | 160 mm | 30 mm | 300 mm |
Stroke Length | 120 mm | 120 mm | 120 mm | 120 mm | 120 mm |
Recommended Spray Volume at 10 Cycles per minute | 1.5 liters | 2.75 liters | 1.1 liters | 2.75 liters | 2.1 liters |
Air Inlet Pressure Maximum | 8 Bar | 7 Bar | 8 Bar | 6 Bar | 6 Bar |
Output Pressure Maximum | 240 Bar | 245 Bar | 320 Bar | 330 Bar | 450 Bar |
Air Consumption N liter per min at 10 cycle per minute. | 400 | 850 | 400 | 1100 | 1100 |
Rubber Hand Gloves Details :
Self-Locking Available in the following sizes (inches) :
Applications and Salient Features :
Details :
Gum Boot Details :
These Nozzle Holders are aluminium casted and machined to precision for hose sizes of19mm, 25 mm, 32 mmm
Operator Suit Details :
Applications and Salient Features :
Features :
Pressure Feed Pot - 9 Ltr.
Description | Quantity |
---|---|
Spray System For PU Primer, Base Coat and Clear Coat | - |
Pressure Feed Pot 9 Ltrs. with 1/4" connector with Manual Stirrer | 1 Nos. |
Air Hose 1/4"" BSP. 5 meters. Long | 1 Nos. |
L.P. Paint Hose MS" ESP. Smtrs. Long | 1 Nos. |
Air Hose 1/4" BSP. 10 meters. long (For Input Air) | 1 Nos. |
Conventional Spray Gun | 1 Nos. |
Pressure Feed Pot - 22 Ltr.
Description | Quantity | Price In Rs. |
---|---|---|
Spray System For PU Primer, Base Coat and Clear Coat | - | Rs. 39,05.00 Total Ready to Use Unit |
Pressure Feed Pot 9 Ltrs. with 1/4" connector with Manual Stirrer | 1 Nos. | |
Air Hose 1/4"" BSP. 5 meters. Long | 1 Nos. | |
L.P. Paint Hose MS" ESP. Smtrs. Long | 1 Nos. | |
Air Hose 1/4" BSP. 10 meters. long (For Input Air) | 1 Nos. | |
Conventional Spray Gun | 1 Nos. |
Salient Features :
Applications and Salient Features :
To Control the Abrasive Flow.
Applications and Salient Features :
Applications and Salient Features :
Additional Information:
Delivery Time : 7 - 10 DAYS
Efficient vibration for abrasive sieving.
Available in the following sizes (inches) :
The range is suitable for transferring paints materials, Oils, explosive liquids, feed multiple spray guns and paints circulation systems. It is design for for high delivery upto 120 ltrimin. and more.
Features :
Applications and Salient Features :