Other Products / Services #432576

Salient Features & Application :

• For Surface Cleaning
• Descaling
• Deburring
• De-flashing
• Shot peening
• Best for Low Pressure Machines.
• All of the above on components made of iron, stainless steel & aluminium.

Urea Plastic Blast Media is a plastic grain stripping abrasive used in sandblasting operations. It is the most widely used plastic media. Urea Plastic Abrasive Grit is environmentally friendly and recyclable – an alternative to chemical stripping. Urea Plastic Abrasive Grit is formulated to meet an increased level of stripping performance where stripping speed outweighs other considerations. Urea Plastic Abrasive Grit is able to strip tough coatings with an impressive strip rate. Urea Plastic Abrasive Grit is typically used for less sensitive applications.

Benefits :

• Durable and Reusable
• Medium Hardness (MOH 3.5)
• Low Dusting
• Does Not Generate Heat During Blasting
• Suitable for Multiple Substrates
• Meets MIL-P-85891

Applications :

• For precise descaling
• De-flashing
• Deburring
• Shining of removal of old paint
• Varnishing

Features :

• Removal of corrosion
• Removal of mill scale
• Removal of coatings
• Removal of heat treatment residue
• Removal of carbon buildup
• Removal of tool marks
• Removal of burrs etc.

Applications :

• Provides comfortable grip for operator
• Allows precise control of blast pattern
• Renders uniform texture
• Creates an etched finish to increase bonding strength for coatings
• Guns accept a  variety of nozzles and extensions - suitable for your application.

Details :

• Top Liners
• Side Liners
• End Liners
• Mn. Hanging Type Liners
• Mn. Headed Bolt Type Liners

Details :

• Max working pressure – 4000 PSI
• Clears Clogs
• Spray Spraying Pulverisation
• Can hold turn clean nozzle in 45 and 90 degree in horizontal as well as vertical spraying position.

• Code - 243281
• Rac 5 ONEseals - 5 Pack. Use only with RAC 5 SwitchTip and

To maximize performance, choose BlueMax II high performance airless hose. With superior flexibility and durability, BlueMax II is designed to ensure you get the best results from your airless sprayer.

Feel the Difference :

• Lighter Weight - Over 10% lighter weight and increased hose flexibility improves usability while spraying under pressure
• Highest Safety Standards - Conductive core meets the highest worldwide safety standards unlike competitive ground wire hose designs
• Minimal Hose Coil Memory - BlueMax II Hose has superior flexibility and reduced coil memory providing ease of use dur- ing coiling and uncoiling
• Corrosion Resistant :
  • Plated spring guards are more corrosion resistant
  • Selecting the best diameter hose to meet your length requirements is critical to good spray-
  • ing pressure. The larger the hose diameter, the greater the pressure at the gun. As you go down in hose diameter size or increase the hose length, there will be less pressure at the gun.
  • When coupling hoses together, connect the larger diameter hose to the sprayer and the smaller diameter hose to the gun inlet for maximum pressure when spraying.

• ProGuard+ is designed to protect your 240V Graco equipment from damage from inconsistent electrical power.
• ProGuard+ constantly monitors the supply voltage and disconnects the equipment from the power source to reduce the risk of damage to the equipment from excessive voltage uctuations (high or low).
• It automatically resets alter a one minute delay when acceptable power is available.

Turbine Pneumatic Stirrer Series :

• Turbine stirrer is rotary mixing stirrer driven by waterproof or EX- rated electric motors with gear box / pneumatic motors [smaller versions].
• The rotary motion of the drive motor transmitted to the turbines blade which provides an efficient crushing and mixing of the product due to its unique blade construction.
• Mixing by such turbine stirrer can be used for all kinds of liquid and semi-liquid products [at the beginning].
• The turbine blade designs are such which eliminate any vortex effect, consequently avoiding any inclusion of bubbles.
• Especially, suitable in dissolving, dispersing and crushing of particulates.
• Such stirrers are provided with an option to be mounted on a pneumatic hoist [for 20 /200 ltr pail] for ease in operation and can be used to mix varying quantity of product in standard pails.
• Major advantage is the blending is possible within minutes, over a conventional agitator which would take couple hours for proper quality mixing.
• Major applications are for proper blending of paints before applications, glue mixing in water in paper industries, mixing of resins in ink base manufactures etc.

Construction :

• All wetted parts are made of standard steel or stainless steel.
• Electrical motors are IS standard [IP55 rated]
• Optional small Laboratory application stirrers with pneumatic motors.
• Pneumatic actuated hoist units for standard drum pails available separately.

Stirrer classication :

• Hand held Stirrer.[for low viscous paints, lab applications]
• Pneumatic motor driven stirrer with single post hoist [2 0 / 25 / 50 ltr pail [automated lifting of stirrer]
• Electrically driven stirrer on twin post hoist [20/150/200 ltr pails] [for high viscous material]

Available Turbine blade sizes :

• TB-70 [best suited for hand held stirrers for smaller pails]
• TB-110 [Medium duty blade suited to t on tanks covers]
• TB-1 50 [Medium duty blade suited with 20OLtr hoists]
• TB-180 [Heavy duty blade suited with 200 Ltr hoist]

• The layouts of complete Blast Room System are always different from plant to plant, every blast room must be designed independently depending upon the customer’s requirement. National Enterprises offers variety of Blast Room designs and system configurations which allow us to design a blast room facility uniquely tailored to meet the economic production, safety & environmental concerns of each customers.
• Blast room equipment is used in a wide variety of industries that require surface preparation prior to the application of a protective coating. The surface of the work piece is cleaned by a mixture of abrasive and high pressure compressed air being directed at the work piece by blast nozzle. The blast room contains the abrasive being shot at the work piece, as well providing lighting & ventilation for the operator's safety.

Enclosure :The modular blast room is specially ventilated and illuminated for enclosed abrasive blasting, and is a fully sealed, dust tight, all steel structure. The components are prefabricated for simple bolt-together erection, with little or no job site welding required. The enclosure stands by it’s own structural support without connections to the surrounding facilities. Internally, the enclosure has no areas, other than the floor, where airborne media or dust may be captured. The size of the enclosure depends on :

• The size of the job
• Number of operators
• Adequate working space around the job.

Single Screw Partial Reclaim System :

• A single screw partial reclaim system is the most economical floor design available. The system contains the major components heavy-duty screw, belt and bucket elevator, air-wash separator, perforated storage hopper with a caged man ladder and handrail. This is a basic "automatic" reclaim package that can be expanded to and "H", "U" or full floor reclaim system.
• It best suited for low to medium productive levels.

H Shaped Partial Reclaim System :

• The "H" shaped partial reclaim system adds two longitudinal screw assemblies along each side wall of the blast room. The position of the screw assemblies allows the abrasive delivered from the blasting nozzle, which is either blown or rebounded off the work piece, to strike the side walls and fall into the screws, automatically reclaiming approx. 60 - 90% of the blast media.
• This system is best suited for medium to high production.

U Shaped Partial Reclaim System :

• The "U" shaped partial reclaim system adds two longitudinal metered screw assemblies along each side wall of the blast room. The position of the screw assemblies allows automatically reclaiming approx. 60 - 90% of the blast media. This floor design is typically utilized in a "flow-through" room configuration where heavy work pieces and/or material handling devices can drive into the room and position the work piece on the steel covered concrete floor located between the longitudinal screws.
• This system is best suited for medium to high production.

Full Floor Reclaim System :

• The full floor reclaim system utilizes multiple screw assemblies to create a fully automatic abrasive reclaim system, where 100% of the blast media is returned to the separator system during the blasting operation.
• This system is best suited for high production requirements.

Recovery Systems :
All abrasive recovery system include three basic functions :

• Delivering the abrasive which rebounds off the workpiece too a central recovery point.
• Transporting the abrasive from that central point to an abrasive cleaner.
• Removing dust, fines and other unwanted material from the abrasive before it enters the blast machine to re-use.

Mechanical Recovery : Consists of Bucket Elevator, Abrasive Cleaner & Screw Conveyor System

Pneumatic Recovery :

• Pneumatic Recovery works best with light weight media, such as agricultural, plastic, glass bead or aluminium oxide. The "W" Section pneumatic recovery system, dust and media fall through funnel shaped holes into channels beneath the floor. High velocity air carries this media and dust to the reclaimer.
• Because there are no moving parts, pneumatic floors are simple to operate and maintain. Pneumatic recovery requires the use of a reclaimer - a type of cyclone separator - to separate blast media from the dust, debris and fines.

Scrapper Floor Recovery :

• One of the mechanical recovery systems from blast room floor where the abrasive is pushed forward by pushers in to the plenum/screw hopper for reuse.
• The scraper floor is designed to automatically recover spent abrasive and contamination back to a bucket elevator. The scraper floor consists of a series of pivoting blades fitted into a movable frame. The scraper move back and forth by a pneumatic cylinder. The blades ride up and over the media on the backwards stroke, pushing the abrasive along on the forward stroke. The media is then transported to the abrasive cleaning unit. The advantage of the scraper floor system is its low profile design which reduces or, if floor mounted, eliminates any foundation costs. The system is designed for low maintenance and does not require any tools to remove the blades from the modules for inspection or repair.

Air Ejector Recovery System : Air Ejector type Recovery is a low cost abrasive recovery system in which abrasive is swept manually in a corner & fed in the feed hopper. From the feed hopper air-operated, air-injector by a respiratory pipe forces the abrasive into separator drum through elevator pipe. Fine dust from the abrasive is separated in and usable media with fine particles of abrasive passed through fine screen separator. In fine screen separator the fine abrasive particle get filtered out and usable media transferred into pressure tank for reuse.

Applications and Salient Features :

• Airless Internal Spray Painting of pipe from 600 mm to 2500 mm
• Internal pipe attachment from 50 mm ID to 2.5 meters ID.
• 3 times faster than manual operations.
• Linear Speed up to 5 meter/ minute
• Oscillation speed - 0.25 to 0.9 meter/ sec.
• Renders uniform coating
• Electronic variable linear speed - controllable
• Servo driven rotary reciprocating arrangement.

Details :

• Blast cleans internal diameter of pipe from 51 mm to 91 4 mm & upto 12 M. length.
• Removes stubborn rust. carbon. mill scale. old paint etc. to get virgin metal surtace which is ideal for further coating.
• No rotation of pipes required.
• No electricity necessary.
• Simple to operate. just select a proper tool and couple it with blast hose of P-7 Abrasive Blasting Machine. Push thee tool through the length of pipe to the oposite and. Start blasting while witlidrawing tool at a speed necessary to obtain desired degree of cleaning.
• A high productive tool. favoured by reneries. missile and rocket producers. water and gas companies. pipe linesrs. shipyard. cleaning stacks and chemical facturies etc. Supplied with centering colllar and adjustable centering carriages to suit varied range of pipe diameters.
• Recommended to use with standard P-7 Machines of Suitable capacity to match with compressed air requireinensts. Variety of abrasive of 18-44 mesh are used except sand. aluminium oxide and silicon crbide.

Features :

• Remote ON/OFF of Machine
• Provide added safety to operator
• Saves abrasives & air consumption when operator change position

Lazer IV 3900/ 5900 Details :

• 4.7 / 6 LPM
• 3300 Max Psi (227 BAR)
• 1 Gun / 2 Guns System

Line Driver/ Line Driver HD Details :

• 5.5 / 6.5 HP Honda Engine
• 11 / 16 Km / Hr

Pole Gun Extensions - Maximum WPR: 3800 psi, (248 bar, 24.8 MPa) :

• Use with Contractor In-Line Valve and the CleanShot Shut-Off Valve to create different length pole guns
• Thread Size - 7/8 in (22 mm), 244163 3 ft (0.9 m), 244164 6 ft (1.8 m)

RAC X Tip Extensions - Maximum WPR: 4050 psi, (280 bar, 28.0 MPa) :

• Includes - RAG X HandTite Guard standard with 7/8 in (22 mm)
• gun nut and oneSeal
• Can be combined  extended reach up to 6 ft (1.8 m), 287019 10 in (25 mm), 287020 15 in (38 mm), 287021 20 in (50 mm), 287022 30 in (75 mm)

ultra cordless airless hand held disinfectant spray equipment ne0333m

• for spraying water based and mineral spirit based purposes.
• can spray 3000 - 4000 sq.ft. Per day.
• 2 nos. 20v dewalt lithium-ion batteries
• tip - rac x fflp 514
• battery life  :  3 years*
• pressure  adjustment : 500 to 2000 psi (34 to 138 bar)
• warranty : 1 year
• provided with:
• 01 nos. Charger01 nos. Storage bag 

The range is suitable for transferring paint materials, oils, explosive liquids, feed multiple spray guns

and paint circulation system. It is designed for high delivery up to 16 ltrs/ min.

FEATURES:

• Low Share Output
• Very Less & Easy Maintenance
• Compact & easy Assembly
• Hard coated piston & cylinder
• Less wear & tear
• Long Life
• Easily replaceable throat seals
• Aluminium & Stainless Steel Wet Part version
• Compliance with EC Norms
• Compact & easy assembly

Salient Features & Application :

• Fastest cutting abrasive
• Recommended for Ferrous & Non Ferrous Components

Available in the following sizes (inches) :

• BW 12/ BW 15
• BW 19/ BW 1215
• BW 1519/ BW 17/ BW 21
• BW 27

Features :

• High flow rate pumps and guns
• Priming piston (shovel) type. Suction for high viscosity fluid
• Auto shut off for pumps
• Facility for twin pail switchover system
• Drum capacity upto 200 Itr.
• Custom built system for more drum capacity with special features.
• Dispensing / spraying nozzles to suit your application

Rubber Hand Gloves Details :

• Shield to operator’s hands
• Provide prevention against damage through high flying abrasive media and static charge if any.

Self-Locking Available in the following sizes (inches) :

• BW 12/ BW 15
• BW 19/ BW 1215
• BW 1519/ BW 17/ BW 21
• BW 27

Applications and Salient Features :

• Full Range of Blasting Nozzles with Metal Casing for Improved Life on any Abrasive Like Aluminium oxide, Steel Grit / Shots. Glass Beads, Sand and Copper Slag used for Sand/ Shot/ Grit/ Abrasive Blasting Machines for the purposes of surface finishing and cleaning.
• TC Nozzles (Tungsten Carbide) Long & Short
• BC Nozzles (Boron Carbide) Long & Short
• SS Nozzles for Y-Gun.
• Low wear & tear
• Longer Service Life
• Evenly distributed
• High Quality

Details :

• Protection against abrasion.
• Color – Off  White
• Shore Hardness 55 +/- 5 A
• Specific Gravity – 1.32

Gum Boot Details :

• Provides safety to operator’s feet
• Ensures compliance with industrial safety regulation.
• Superior Quality

These Nozzle Holders are aluminium casted and machined to precision for hose sizes of19mm, 25 mm, 32 mmm

Operator Suit Details :

• Specially designed to provide safety against the impact of flying abrasive media.
• Long life and high resistance against corrosion.

Applications and Salient Features :

• The Air-fed Abrasive Blasting Helmet is used to protect the operator from all sorts of dangers associated with abrasive blasting.
• The Air-fed Abrasive Blasting Helmet is is designed to optimise safety, minimise operator downtime and increase productivity.
• Provides reasonable comfort, better protection, less fatigue - thus improved productivity.
• Protects operator from the health hazards associated with abrasive blasting.
• Substantially Large Viewing Area.
• All helmet accessories & safety wear available as ready stock.

Features :

• Increases Productivity.
• Manual & Auto Agitation.
• Eliminated wastage & color variatlon.
• Non-standard tanks can also be supplied [MS & SS]
• Standard tank sizes - 2.5, 9, 22 & 45 llters.
• Paint tank inserts for various tank capacities.
• Facilities continuous paint consumption.
• Maintains unifrom uid ow at constant pressure.
• Each tank & lid is constructed of 4mm thick MS Sheets
• Tanks are equipped with a top outlet.
• Clamps are MS forged.
• Robust durable design.

Salient Features :

• Remote ON/OFF of Machine
• Provide added safety to operator
• Saves abrasives & air consumption when operator change position

Applications and Salient Features :

• Most recommended where abrasive/ blast media are carried at high velocity upto 7 BAR.
• Meets and exceeds IS 5894:2005.

To Control the Abrasive Flow.

Applications and Salient Features :

• The bucket elevator lifts the media with the help of Bucket Elevator Belt and Buckets and pours into Media Separation Unit from where the reusable abrasive goes into the Portable Abrasive Blaster and Abrasive is recycled through blast nozzle.
• The buckets are of seamless type made of 3.15 mm thick steel sheet. Bucket elevator is fabricated from MS material of 5 mm thick at boot section 2.5 mm thick at trunk

Applications and Salient Features :

• Our Helmet Air Breather separates moisture, oil, dust particles and harmful gases from air supply line and provides purified air to the helmet.
• Our special designed model can remove oil mists, water vapour and particulate up to 0.5 microns form breathing air.
• Moisture is separated from expansion in the outer chamber and drain through a pet cock at the bottom.
• The air is then forced through a filter cartridge.
• The outer pressure of breathing air for helmet is regulated with the pressure gauge and pressure regulator.

• technical specifications:
• size of chamber: 1.5 m x 1.5 m x 2.5 m (l x w x h)
• frame - made out of square pipes
• side sheets - acrylic sheets
• front and back - transparent pvc sheets
• diffusers - 5 nos. (01 nos. On top, 02 nos. Each at both sides)
• pump - 1.4 hp
• capacity - 8 to 10 lpm
• piping - pp
• container - 20 ltrs.
• control pannel - with relay and timer.

Efficient vibration for abrasive sieving.

Available in the following sizes (inches) :

• BW 12/ BW 15
• BW 19/ BW 1215
• BW 1519/ BW 17/ BW 21
• BW 27

The range is suitable for transferring paints materials, Oils, explosive liquids, feed multiple spray guns and paints circulation systems. It is design for for high delivery upto 120 ltrimin. and more.

Features :

• Pneumatically sensed Air Motor.
• High Flow Rate-Four Ball Pump
• Stainless Steel rust proof Hydraulic Body Easy Maintenance
• Ice Free Air Motors
• Non turbulent flow suitable for metallic and water borne paints.

Applications and Salient Features :

• Flenge Type Mixing Tube Assembly - Most appropriate for Portable Abrasive Blasters.
• Cross Type Mixing Tube Assembly - most appropriate for Cabinet Type (Pressure Blasters)
• Available in various colours & sizes as per your requirement