Inconel X750 Round Bar

Thickness 50 mm to 6000 mm Long
Length 1 to 6 Meters, Custom Cut Lengths
Specifications ASTM B637 / ASME SB637
Size 14mm-300mm
Diameter 0.1 mm to 100 mm
Finish Bright, Polish & Black
Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging etc.
Condition Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished

Inconel X750 Round Bar Equivelent Grades

STANDARD	WERKSTOFF NR.	UNS
Inconel X750	2.4669	N07750

Inconel X750 Round Bar Chemical Composition

Grade	Ni	Cr	Al	C	Mn	Ti	Cu	Si	S
Inconel X-750	70.0 min	14.0 - 17.0	0.40 - 1.0	.08 max	1.00 max	2.25 - 2.75	0.50 max	.50 max	.01 max

Incoloy X750 Round Bar Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.28 g/cm3	1430°C	1267 MPa	868 MPa	25 %

View Complete Details

Ask Latest Price & Details

Alloy A286 Round Bar

Grade Alloy A286
Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Size 5 mm To 500 mm
Length 100 mm To 3000 mm Long & Above
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Condition Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished.
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

View Complete Details

Ask Latest Price & Details

Nitronic 50 Round Bar

Form Square, Round, Hex, Flat, Wire In Black & Bright Finish
Standard ASTM A276 / ASME SA376 | ASTM A479 /ASME SA479
Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Size 5 mm To 500 mm
Length 100 mm To 3000 mm Long & Above
Diameter 0.1 mm to 100 mm
Grades Nitronic 50 (UNS S20910 | S21800)
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish

View Complete Details

Ask Latest Price & Details

Stainless Steel 422 Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Grade ASTM A276, ASTM A479, ASTM A565
Length 1 to 6 Meters, Custom Cut Lengths
Material Grade Stainless Steel 422 (UNS S42200)
Outside Diameter 4mm to 500mm
Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish

Stainless Steel 422 Round Bar Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
SS 422	1.4742	S42200	SUS 422	442S19	–	–	–

Stainless Steel 422 Round Bar Chemical Composition

Grade		C	Si	Ni	S	Mn	P	Cr	Mo	V	Cu	W
SS 422	min.	0.20	0.20	0.50	-	-	-	11.0	0.75	0.17	-	0.90
SS 422	max.	0.25	0.60	1.00	0.030	1.00	0.040	13.5	1.25	0.30	0.50	1.25

Stainless Steel 422 Bar Mechanical Properties

Grade	Tensile Strength (MPa) min	Elongation (% in 50mm) min	Yield Strength 0.2% Proof (MPa) min	Hardness
				Rockwell B (HR B) max	Brinell (HB) max
Stainless Steel 422	115	25	140	293	341

View Complete Details

Ask Latest Price & Details

Hastelloy X Round Bar

Diameter 3.17mm to 350mm
Grade Hastelloy X (UNS No. N06002)
Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
Application Chemical process, Food processing, Petrochemical, Pollution control, Pulp and Paper, Refining, Waste
Condition Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished.
Specifications EN, DIN, JIS, ASTM, BS, ASME, AISI
Standard Specification ASTM B572 / ASME SB572
Size 15NB to 150NB IN
Length 100 mm to 3000 mm Long & Above
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Surface Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline

Hastelloy X Bars Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Hastelloy X	2.4665	N06002

Hastelloy X Round Bar Chemical Composition

Grade	Ni	Mo	Cr	Fe	Mn	C	Co	Si	P	S
Hastelloy X	Balance	8.00 - 10.00	20.50 - 23.00	17.00 - 20.00	1.00 max	0.05 - 0.15	0.50 - 2.50	1.00 max	0.04 max	0.03 max

Hastelloy X Round Bar Mechanical & Physical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.22 g/cm³	1355°C	655 MPa	240 MPa	35%

View Complete Details

Ask Latest Price & Details

Nitronic 60 Round Bar

Grade ASTM A276 / ASME SA376 | ASTM A479 /ASME SA479
Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Size 5 mm To 500 mm
Length 100 mm To 3000 mm Long & Above
Diameter 0.1 mm to 100 mm
Grades Nitronic 60 (UNS S20910 | S21800)
Form Square, Round, Hex, Flat, Wire In Black & Bright Finish
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish

View Complete Details

Ask Latest Price & Details

ASTM A193 B16 Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Size 4 mm to 350 mm dia
Length 1000 mm Long To 6000 mm Long
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Condition Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished.

View Complete Details

Ask Latest Price & Details

Duplex Steel Round Bar

Grade ASTM A276, ASME SA276
Grade Duplex 1803, Duplex 2205
Length 1 to 6 Meters, Custom Cut Lengths
Size 6 mm to 120 mm.
Diameter 6mm to 350mm
Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging, etc
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance +/-0.2mm

View Complete Details

Ask Latest Price & Details

Nimonic 90 Round Bar

Application Chemical process, Food processing, Petrochemical, Pollution control, Pulp and Paper, Refining
Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Grade Nimonic 90 (UNS No. N07090) Round Bars
Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
Tolerance K10, K11, K12, H8, H9, H10, H11, H12, H13K9, or as per clients’ requirements
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Surface Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline

Nimonic 90 Round Bars Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Nimonic 90	2.4632	N07090

Nimonic 90 Bar and Rods Chemical Properties

Grade	C	Cr	Co	Ti	Al	Si	Cu	Mn
Nimonic Alloy 90	0.2 max	18 - 21	15 - 21	2 - 3	1 - 2	1.0 max	0.2 max	1.0 max

Nimonic 90 Round Bar Mechanical Properties

Density	Melting Point	Coefficient of Expansion	Modulus of Rigidity	Modulus of Elasticity (Annealed + Aged) (Spring Temper + Aged)
8.18g/cm³	1370°C	12.7 μm/m °C (20 - 100°C)	82.5 kN/mm²	213 kN/mm² 227 / 240 kN/mm²

View Complete Details

Ask Latest Price & Details

Alloy 20 Round Bar

Grade ASTM B473 / ASME SB473
Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Size 4 mm To 350 mm DIA
Length 100 mm To 3000 mm Long & Above
Condition Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished.
Grades Alloy 20 (UNS No. N08020)
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

View Complete Details

Ask Latest Price & Details

Carbon Steel Round Bar

Standard ASTM A105, ASME SA105, ASTM A350 LF2, ASME A350 LF2
Length 1 to 6 Meters, Custom Cut Lengths
Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Size 26mm to 63mm.
Diameter 6mm to 350mm
Grade Carbon Steel A105, Carbon Steel A106, Carbon Steel A107, Carbon Steel A108, Carbon Steel A109
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish

View Complete Details

Ask Latest Price & Details

Hastelloy Round Bar

Standard ASTM B 574 / ASME SB 574
Size 26mm to 63mm.
Outer Diameter 4-600mm (3/8"-25")
Grades Hastelloy C276, Hastelloy C277, Hastelloy C278, Hastelloy C279, Hastelloy C280, Hastelloy C281
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Technique Forging and cold drawing

View Complete Details

Ask Latest Price & Details

Inconel Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Length 100 mm To 3000 mm Long & Above
Standard ASTM B166 / ASTM SB166
Size 5 mm To 500 mm
Diameter 0.1 mm to 100 mm
Grades Inconel X750, Inconel X751, Inconel X752, Inconel X753, Inconel X754, Inconel X755, Inconel X756
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

View Complete Details

Ask Latest Price & Details

Hastelloy C276 Round Bar

Diameter 25mm to 152mm
Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging etc.
Condition Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished
Specifications ASTM B574 / ASME SB574
Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Range 3.17 MM TO 350 MM DIA
Length 1 to 6 Meters, Custom Cut Lengths
Finish Bright, Polish & Black
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

Hastelloy C276 Round Bar Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	GOST	EN	OR
Hastelloy C276	2.4819	N10276	NW 0276	ХН65МВУ	NiMo16Cr15W	ЭП760

Hastelloy C276 Round Bar Chemical Composition

Grade	C	Mn	Si	S	Co	Ni	Cr	Fe	Mo	P
C276	0.010 max	1.00 max	0.08 max	0.03 max	2.50 max	50.99 min*	14.50 – 16.50	4.00 – 7.00	15.00 – 17.00	0.04 max

Hastelloy C276 Round Bars Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Hastelloy C276	8.89 g/cm3	1370 °C (2500 °F)	Psi – 1,15,000 , MPa – 790	Psi – 52,000 , MPa – 355	40 %

View Complete Details

Ask Latest Price & Details

Invar 36 Round Bar

Grade ASTM F1684 UNS K93603
Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Diameter 3mm~800mm
Thickness 2mm~100mm
Width 10mm~500mm
Grades Invar 36 (UNS No. K93603) Round Bars
Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging, etc
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish

View Complete Details

Ask Latest Price & Details

Monel Round Bar

Dimension ASTM, ASME and API
Length 100 mm To 3000 mm Long & Above
Standard ASTM B164 / ASTM SB164
Size 5 mm To 500 mm
Diameter 0.1 mm to 100 mm
Grades Monel R405, Monel R406, Monel R407
Form Square , Round , Hex , Flat, Wire In Black & Bright Finish
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

View Complete Details

Ask Latest Price & Details

Nickel Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Standard ASTM B160, ASTM B865, AMS 5513, AMS 5511, AMS 5647
Size 1 MM To 500MM
Grades NICKEL 200 / 201
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

View Complete Details

Ask Latest Price & Details

Nimonic Round Bar

Standard ASTM B160, ASTM B865, AMS 5513, AMS 5511, AMS 5647
Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Diameter 3mm~800mm
Grades Nimonic 75, Nimonic 76, Nimonic 77, Nimonic 78
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Length Bar cutting to 650mm

View Complete Details

Ask Latest Price & Details

Stainless Steel Round Bar

Grade ASTM A276 Round Bar, ASME SA276 Round Bar / ASTM A479 Round Bar ASME SA479 Round Bar
Grade AISI 201, 202, 303, 304, 304L, 316, 316L, 321, 253MA, 416, 431, 2205, 630.
Number Of Flower Stainless Steel Cold Drawn, Hot Rolled, Forged Round Bar, Cold Rolled, Rod
Size 3 mm up to 100 mm 1/8” up to 4”
Diameter 3-~800mm
Tolerance – 0/+10mm (-0 +0.5 inch)
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Size Tolerance h8, h9 (DIN 671), h10, h11, ASTM A484, DIN 1013

View Complete Details

Ask Latest Price & Details

Titanium Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Length Bar cutting to 650mm
Standard ASTM B348, ASTM F136, ASTM F67, ASTM F136, ISO-5832-2(3), AMS4928, MIL-T-9047G, JIS etc
Minimum diameter 0.040 inch or 1.00 mm
Maximum diameter 14.000 inch or 400.00 mm
Grades Titanium Grade 1, Titanium Grade 2, Titanium Grade 3, Titanium Grade 4, Titanium Grade 5
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

View Complete Details

Ask Latest Price & Details

Waspaloy Round Bar

Grade ASTM B637, ASME SB637
Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Size 19 mm – 187 mm
Length 2mm to 6000mm
Form Round, Square, Hex, Octagonal, Rectangle, etc
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

View Complete Details

Ask Latest Price & Details

Zeron 100 Round Bar

Grade ASTM A182, ASTM A276, ASTM A479
Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Length 3 to 6 meter, Custom Cut Lengths
Diameter 3mm - 450mm DIA
Grades Zeron 100
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance according to EN 10278 - ISO 286-2

View Complete Details

Ask Latest Price & Details

Super Duplex Round Bar

Grade ASTM A276, ASME SA276
Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Length 1 to 6 Meters, Custom Cut Lengths
Size 6 mm to 120 mm.
Diameter 6mm to 350mm
Grades S32750 / S32760
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish

View Complete Details

Ask Latest Price & Details

ASTM A105 Carbon Steel Round Bar

Standard ASTM A105, ASME SA105
Length 1 to 6 Meters, Custom Cut Lengths
Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Size DN15″–1600″
Diameter 6mm to 350mm Diameter
Pressure PN0.25—PN42Ma
Grade Carbon Steel A105
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish

ASTM A105 Carbon Steel Round Bar/Rods Equivalent Grades

STANDARD	UNS	WERKSTOFF NR.
ASTM A105	K03504	–

ASTM A105 Carbon Steel Round Bar Chemical Composition

Carbon Steel	C	Si	Mn	P	S	Cr
A105	0.35	0.10-0.35	0.60-1.05	0.035	0.040	0.30

ASTM A105 Carbon Steel Bar Mechanical Properties

Tensile Strength (N/mm2)	Elongation %	HB max
485	22	187

View Complete Details

Ask Latest Price & Details

L605 Round Bar

Grade Alloy L-605
Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Size 5 mm To 500 mm
Length 100 mm To 3000 mm Long & Above
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Condition Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished.

View Complete Details

Ask Latest Price & Details

Monel 400 Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Length 1 to 6 Meters, Custom Cut Lengths
Specifications ASTM B164 / ASME SB164
Range 3.17 MM TO 350 MM DIA
Diameter 25mm to 152mm
Finish Bright, Polish & Black
Condition Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished

Monel 400 Bars Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	GOST	AFNOR	JIS	BS	EN
Monel 400	2.4360	N04400	МНЖМц 28-2,5-1,5	NU-30M	NW 4400	NA 13	NiCu30Fe

Monel 400 Round Bar Chemical Composition

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	W
Monel 400	0.010 max	0.50 max	0.08 max	0.02 max	0.02 max	20 - 22.5	12.5 - 14.5	Bal	2.5 - 3.5

Monel 400 Round Bars Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.69 g/cm3	1399 °C (2550 °F)	Psi – 1,00,000, MPa–690	Psi – 45000, MPa–310	45 %

View Complete Details

Ask Latest Price & Details

Inconel X750 Spring Wire

Density 8.89 g/cm3
Tensile Strength MPa – 1267
Dimensions AANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length Cut Lengths: 0.125″ to 72″
Diameter 10 microns to 1.0 mm
Resistance ASTM B637 / ASME SB-637 AMS 5667
Melting Point 1393-1427℃

Inconel X750 Spring Wire Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr
Inconel X750	0.08 max	1.00 max	0.5 max	0.01 max	0.5 max	9.0 max	70.0 min	17 max

Inconel X750 Spring Wire Equivalent Grades :

STANDARD	WERKSTOFF NR.	UNS
Inconel X750	2.4669	N07750

View Complete Details

Ask Latest Price & Details

Inconel X750 Sheet

Material Inconel X750, Inconel 718, Inconel 825, Inconel 625, Inconel 600/601, Inconel 800, 800H, 800HT
Number Of Flower Hot Rolled Inconel X750 Sheet, Cold Rolled Inconel X750 Sheet
Standard ASTM B168, ASME SB168, ASTM/ASME SB424, ASTM/ASME SB443, UNS NO6600, BS EN 10088-2, EN 10028-7, IS 6911
Size 15NB to 150NB
Diameter 6mm - 90mm
Density 8.28 g/cm3
Melting Point 1393-1427℃
Tensile Strength 1267
Yield Strength (0.2%Offset) 868
Elongation 25 %

Inconel X-750 Sheets Chemical Properties

Grade	C	Mn	Si	S	Cu	Fe	Ni
Inconel X-750	0.08 max	1.00 max	0.5 max	0.01 max	0.5 max	5.0-9.0	70 max.

Inconel X-750 Sheets Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Inconel X-750	2.4669	N07750

View Complete Details

Ask Latest Price & Details

L605 Sheets

Size 1000 mm x 2000mm, 1220mm x 2440mm, 4' x 8', 1250mm x 2500mm, 1500mm x 3000mm to 6000mm
Thickness 4.0mm - 100mm
Material Stainless Steel 904L, 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317
Number Of Flower Hot Rolled Stainless Steel Sheet & Plate, Cold Rolled Stainless Steel Sheet & Plate
Standard ASTM A240 / ASME SA240

View Complete Details

Ask Latest Price & Details

Nimonic 90 Sheet

Size 0.5 MM TO 200 MM THICK IN 1000 MM TO 2500 MM WIDTH & 2500 MM TO 12500 MM LENGTH
Grade Nimonic 90 (UNS N07090 )
Specifications ASTM B463 / ASME SB463
Standard Standard

Nimonic 90 Chemical Composition :

Grade

Ni

Cr

Co

Ti

Al

C

Si

Cu

Fe

Mn

B

S

Zr

Pb

Nimonic 90

Bal

18-21

15-21

2-3

1-2

0.2 max

1.0 max

0.2 max

1.5 max

1.0 max

0.02 max

0.015 max

0.15 max

0.0020 max

Nimonic 90 Mechanical Properties:

Grade	Material Sheet	Temperature °C	Yield Strength 0.2 % (MPa)	Tensile Strength (MPa)	Elongation (%)	Hardness HV
Nimonic 90	Nimonic 90 sheet Solution Treated (BS HR202)	RT	–	–	–	250 max
	Nimonic 90 sheet Precipitation Treated (BS HR 202)	RT	695 min	1080 min	25 min (0.45mm-3.0mm)	280 min
	Nimonic 90 sheet Precipitation Treated (BS HR202)	500	740 (typical)	995 (typical)	30	–
	Alloy 90 Cold Rolled Sheet (Heat Treated)	–	–	–	–	–

Nimonic 90 Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Nimonic 90	2.4632	N07090

View Complete Details

Ask Latest Price & Details

Stellite 6b Round Bar

Grade AMS 5894
Grade Cobalt 6B (UNS No. R30006) Round Bars
Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Size 25mm to 152mm
Length 1 to 6 Meters, Custom Cut Lengths
Finish Bright, Polish & Black
Condition Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished.

View Complete Details

Ask Latest Price & Details

Monel R405 Round Bar

Length 1 to 6 Meters, Custom Cut Lengths
Specifications ASTM B164 / ASME SB164
Standard EN, DIN, JIS, ASTM, BS, ASME, AISI
Range 3.17 MM TO 350 MM DIA
Diameter 25mm to 152mm
Finish Bright, Polish & Black
Condition Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished
Density 8.8 g/cm3
Melting Point 1300 – 1350°C
Tensile Strength 550 Mpa
Yield Strength (0.2%Offset) 240 Mpa

Monel R405 Bars Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Monel R405	–	N04405

Monel R405 Round Bar Chemical Composition

Grade	Fe	C	Ni	Mn	Si	S	Cu	Al
Monel R405	2.5 max	0.3 max	63 min	2.0 max	0.5 max	0.025 – 0.060	28.0-34.0	–

View Complete Details

Ask Latest Price & Details

Monel K500 Round Bar

Dimension ASTM, ASME and API
Length 100 mm to 3000 mm Long & Above
Grade Monel K500 (UNS No. N05500)
Specification ASTM B 865 / ASME SB 865 / AMS 4676 / QQ N 286
Size 6 mm to 120 mm.
Diameter 3.17mm to 350mm diameter
Finish Bright, Polish & Black

Monel K500 Bars Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Monel K500	2.4375	N05500

Monel K500 Round Bar Chemical Composition

Grade	Ni	Fe	C	Mn	Si	Cu	Al	S	Ti
Monel K500	63.0 min	0.5 – 2	0.25 max	1.5 max	0.5 max	27.0 – 33.0	2.3 – 3.15	0.010 max	0.35 – 0.85

Monel K500 Round Bars Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.44 g/cm3	1350 °C (2460 °F)	Psi – 160000 , MPa – 1100	Psi – 115000 , MPa – 790	20 %

View Complete Details

Ask Latest Price & Details

Nimonic 75 Round Bar

Product Nimonic 75 Round Bar
Dimensions AISI, EN, DIN, ASTM, ASME, JIS, BS
Round Bars Size Range 8 mm To 160 mm
Tolerance K10, K11, K12, H8, H9, H10, H11, H12, H13K9, or as per clients’ requirements
Finish Black, Rough Turned, Bright Polished, Matt Finish, NO.4 Finish, BA Finish
Condition Hardened & tempered, annealed
Surface Cold Drawn, Bright, Sand Blasting Finished, Hot Rolled Pickled, Hairline, Polished

Nimonic 75 Round Bars Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Nimonic Alloy 75	–	N06075

Nimonic 75 Bar and Rods Chemical Properties

Grade	C	Ni	Cu	Cr	Ti	Fe	Mn
Nimonic Alloy 75	0.08 / 0.15	Bal	0.5 max	18.9 – 21.0	0.2 / 0.6	5.0 max	1.0 max

Nimonic 75 Round Bar Mechanical Properties

Mechanical & Physical Properties	21.1°C	100°C	204.4°C	315.6°C	400 °C	537.8°C	648.9°C	700°C	760 °C	815 °C	870 °C	982 °C
Ultimate Tensile Strength /MPa	792	–	–	–	–	726	473	–	286	–	139	66
0.2% Yield Strength /MPa	407	–	–	–	–	363	275	–	152	–	68	31
Elongation %	31	–	–	–	–	27	32	–	75	–	90	91
1,000 hr Rupture Strength	–	–	–	–	–	–	83	47	26	15	8.3	–
Coefficient of Thermal Expansion /µm/m°C **	–	11	12.7	13.4	13.9	14.3	15	15.4	–	16.5	17.1	18.2
Thermal Conductivity /kcal/(hr.m.°C) **	10.06	–	–	–	–	–	–	–	–	–	–	–
Modulus of Elasticity / GPa	221	216	210	203	197	190	181	173	–	165	153	140

View Complete Details

Ask Latest Price & Details

Nimonic 80A Round Bar

Product Nimonic 80A Round Bar
Standard ASTM B637 / ASME SB637, BS2 HR1, BS3076 NA20, 2.4631
Dimensions AISI, EN, DIN, ASTM, ASME, JIS, BS
Round Bars Size Range 8 mm To 160 mm
Tolerance K10, K11, K12, H8, H9, H10, H11, H12, H13K9, or as per clients’ requirements
Finish Black, Rough Turned, Bright Polished, Matt Finish, NO.4 Finish, BA Finish
Condition Hardened & tempered, annealed

Nimonic 80A Round Bars Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Nimonic Alloy 80A	2.4631	N07080

Nimonic 80A Bar and Rods Chemical Properties

Grade	C	Ni	Cu	Cr	Ti	Fe	Mn
Nimonic Alloy 80A	0.10 max	Bal	0.2 max	18.0-21.0	1.8-2.7	3.0 max	1.0 max

Nimonic 80A Round Bar Mechanical Properties

Ultimate Tensile Strength (N/mm²)	Proof Stress (N/mm²)	Elongation (%)	Hardness (HB)
1000	620	20	–

View Complete Details

Ask Latest Price & Details

Nimonic C263 Round Bar

Product Nimonic 80A Round Bar
Standard ASTM B637 / ASME SB637, BS2 HR1, BS3076 NA20, 2.4631
Dimensions AISI, EN, DIN, ASTM, ASME, JIS, BS
Round Bars Size Range 8 mm To 160 mm
Tolerance K10, K11, K12, H8, H9, H10, H11, H12, H13K9, or as per clients’ requirements
Finish Black, Rough Turned, Bright Polished, Matt Finish, NO.4 Finish, BA Finish
Condition Hardened & tempered, annealed

Nimonic C263 Round Bars Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Nimonic Alloy 263	2.4650	N07263

Nimonic C263 Bar and Rods Chemical Properties

Grade	C	Cr	Co	Ti	Al	Si	Cu	Mn
Nimonic Alloy 263	0.04-0.08	19 – 21	19 – 21	1.90 – 2.40	0.60 max	0.40 max	0.20 max	0.60 max

Nimonic C263 Round Bar Mechanical Properties

Mechanical properties	Test Method	As Built	Heat Treated
Tensile strength	ISO 6892-1:2009(B) Annex D	900 ± 40 MPa	1100 ± 30 MPa
Yield strength (Rp 0.2 %)	ISO 6892-1:2009(B) Annex D	650 ± 40 MPa	800 ± 30 MPa
Elongation at break	ISO 6892-1:2009(B) Annex D	40 ± 5 %	35 ± 5 %
Young’s Modulus	–	220 ± 15 MPa	220 ± 15 MPa

View Complete Details

Ask Latest Price & Details

Nickel Alloy 200/201 Round Bar

Grade ASTM B160, ASTM B865, AMS 5513, AMS 5511, AMS 5647
Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Size 1 MM To 500MM
Grades NICKEL 200 / 201
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

Nickel Alloy 200/201 Bars Equivalent Grades

STANDARD	UNS	WNR.	JIS	EN
Nickel 200	N02200	2.4066	NW 2200	Ni 99.2
Nickel 201	N02201	2.4068	NW 2201	LC-Ni 99

Nickel Alloy 200/201 Round Bar Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni
Nickel 200	0.15 max	0.35 max	0.35 max	0.01 max	0.25 max	0.40 max	99.0 min
Nickel 201	0.02 max	0.35 max	0.35 max	0.01 max	0.25 max	0.40 max	99.0 min

Nickel Alloy 200/201 Round Bars Mechanical Properties

Grade	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Nickel 200	8.9 g/cm3	1446 °C (2635 °F)	Psi – 67000 , MPa – 462	Psi – 21500 , MPa – 148	45 %
Nickel 201	8.9 g/cm3	1446 °C (2635 °F)	Psi – 67000 , MPa – 462	Psi – 21500 , MPa – 148	45 %

View Complete Details

Ask Latest Price & Details

AISI 4140 Round Bar

Grade 4140
Technique AISI/SAE 4140 alloy steel Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Specification Alloy Steel 4140 Bar
Diameter 3-~800mm
thickness 3.0 to 12.0mm
Surface Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Condition Hardened & tempered, annealed

AISI/SAE 4140 Round Bar/Rods Equivalent Grades

Standard	AISI / SAE 4130
UNS	-
WERKSTOFF NR.	25CrMo4, GS-25CrMo4
BS 970	708A30, CDS110
UNI	25CrMo4 (KB), 30CrMo4
JIS	SCM 420, SCM 430, SCCrM1
EN name	-
EN #	1.7218

AISI/SAE 4140 Round Bar Chemical Composition

Grade	C	Si	Mn	Cr	Mo	P	S
AISI 4130	0.28-0.33	0.15-0.35	0.4-0.8	0.8-1.1	0.15-0.25	0.035	0.04

AISI/SAE 4140 Bar Mechanical Properties

Grade	Delivery State	T.S. N/mm2 Min	Y.S. N/mm2 Min	A,% Min	Z,% Min	Hardness, (annealing or tempering) HB,max	Forging ratio	Grain Size (level)	Nonmetal ratio
AISI 4130	Hot rolled, forged, or heat treatment	930	735	12	50	229	≥ 4:1	≥ 6	≤ 2.0

View Complete Details

Ask Latest Price & Details

AISI/SAE 4340 Round Bar

Grade 4340
Technique AISI/SAE 4140 alloy steel Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Specification Alloy Steel 4340 Bar
Diameter 3-~800mm
thickness 3.0 to 12.0mm
Surface Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Condition Hardened & tempered, annealed

AISI/SAE 4340 Round Bar/Rods Equivalent Grades

Standard	AISI / SAE 4340
UNS	-
WERKSTOFF NR.	34CrNiMo6, 40NiCrMo8-4
BS 970	817M40, En24
UNI	35NiCrMo6 (KB), 40NiCrMo7 (KB)
JIS	SNCM 447, SNB24-1-5
EN name	34CrNiMo6
EN #	1.6582, 1.6562

AISI/SAE 4340 Round Bar Chemical Composition

	C	Mn	Si	S	P	Cr	Ni	Mo
SAE - 4340	.38- .43	.60 - .80	.15 - .35	.035 MAX	.040 MAX	.70 - .90	1.65 -2.00	.20 - .30

AISI/SAE 4340 Bar Mechanical Properties

Tensile strength kgf/mm²	Yield strength kgf/mm²	Elongation %	Cross section reduction rate %	Impact value	Hardness Hb
≧100	≧90	≧16	≧45	≧7	293~352

View Complete Details

Ask Latest Price & Details

ASTM A350 LF2 Carbon Steel Round Bar

Grade ASTM A350, ASME SA350
Dimension 2mm - 350mm
Thickness 0.5mm to 500mm Diameter
Length Random length 3-6m or fixed length or as per request.
Specification EN, DIN, JIS, ASTM, BS, ASME, AISI
Condition Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished
Pressure PN0.25---PN42Ma
Finish Bright, Polish & Black

ASTM A350 LF2 Carbon Steel Round Bar/Rods Equivalent Grades

STANDARD	UNS	WERKSTOFF NR.
ASTM A350 LF2	K03011	1.0508

ASTM A350 LF2 Carbon Steel Round Bar Chemical Composition

Grade		C	Ni	Si	S	Mn	P
ASTM A350 LF2	min.	-	-	0.17	-	0.6	-
ASTM A350 LF2	max.	0.30	0.40	0.37	0.040	1.35	0.035

ASTM A350 LF2 Carbon Steel Bar Mechanical Properties

Grade	Tensile Strength (ksi) min	Elongation (% in 50mm) min	Yield Strength 0.2% Proof (ksi) min	Hardness
ASTM A350 LF2	485	22	250	197

View Complete Details

Ask Latest Price & Details

Duplex Steel UNS S31803 Round Bar

Grade ASTM A276, ASME SA276
Grade Duplex 31803, Duplex 32205
Length 1 to 6 Meters, Custom Cut Lengths
Size 6 mm to 120 mm.
Diameter 6mm to 350mm
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance +/-0.2mm

Duplex Steel UNS S31803 Bars Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Duplex S31803	1.4462	S31803

Duplex Steel 2205 Round Bar Chemical Composition

Grade	UNS No	C %	Cr %	Ni %	P %	Si %	S %	Mo %	N %	Mn %
31803	S31803	< 0.03	21.0-23.0	4.5-6.5	1.03 max	1 max	0.02 max	2.5-3.5	0.08-0.2	< 2.0

Duplex Steel 2205 Round Bars Mechanical Properties

Grade	YS (MPa)	UTS (MPa)	% Elongation	Hardness(BHN)
31803	450 min.	620 min.	25 min.	293 max.

View Complete Details

Ask Latest Price & Details

EN24 Carbon Steel Round Bar

Technique EN24 Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Thickness 3.0 to 12.0mm
Grade CS EN-24 Round Bar
Condition Hardened & tempered, annealed
Diameter 3-~800mm

EN24 Carbon Steel Round Bar Chemical Composition

	C	P	Mo	Mn	S	Cr	Si	Ni
EN - 24	.35 - .45	.040	.20 - .40	.45 - .70	.040	.90 - 1.40	.10 - .35	1.30 - 1.80

EN24 Round Bar Mechanical Properties

Max Stress	850-1000 n/mm2
Yield Stress	680 n/mm2 Min	Up to 150mm LRS
	654 n/mm2 Min	150 to 250mm LRS
0.2% Proof Stress	665 n/mm2 Min	Up to 150mm LRS
	635 n/mm2 Min	150 to 250mm LRS
Elongation	13% Min	(9% if cold drawn)

View Complete Details

Ask Latest Price & Details

Hastelloy B2 Round Bar

Grade Hastelloy B2 (UNS No. N10665)
Finish Bright, Polish & Black
Specification ASTM B 335/ ASME SB 335
Dimensions ASTM, ASME and API
Size 6 mm to 120 mm.
Length 100 mm to 3000 mm Long & Above

Hastelloy B2 Round Bar Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Hastelloy B2	2.4617	N10665

Hastelloy B2 Round Bar Chemical Composition

Grade	Ni	Mo	Cr	Fe	Mn	C	P	S	Si
Hastelloy B2	Bal	26 - 30	1.0	-	0.1	0.02	0.04	0.03	0.1

Hastelloy B2 Round Bars Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
9.2 g/cm3	1370 °C (2550 °F)	Psi – 1,15,000 , MPa –760	Psi – 52,000 , MPa – 350	40%

View Complete Details

Ask Latest Price & Details

Duplex Steel UNS S32205 Round Bar

Grade ASTM A276, ASME SA276
Grade Duplex 32205
Length 1 to 6 Meters, Custom Cut Lengths
Size 6 mm to 120 mm.
Diameter 6mm to 350mm
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance +/-0.2mm

Duplex Steel UNS S32205 Bars Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
2205 Duplex	1.4462	S32205

Duplex Steel 2205 Round Bar Chemical Composition

Grade	UNS No	C %	Cr %	Ni %	P %	Si %	S %	Mo %	N %	Mn %
2205	S32205	< 0.03	22.0-23.0	4.5-6.5	0.03 max	1 max	0.02 max	3.0-3.5	0.14-0.20	< 2.0

Duplex Steel 2205 Round Bars Mechanical Properties

Grade	YS (MPa)	UTS (MPa)	% Elongation	Hardness(BHN)
2205	450 min.	655 min.	25 min.	293 max.

View Complete Details

Ask Latest Price & Details

Hastelloy B3 Round Bar

Grade Hastelloy B3 (UNS No. N10675)
Specification ASTM B 335/ ASME SB 335
Dimensions ASTM, ASME and API
Size 6 mm to 120 mm.
Length 100 mm to 3000 mm Long & Above
Finish Bright, Polish & Black

Hastelloy B3 Round Bar Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Hastelloy B3	2.4600	N10675

Hastelloy B3 Round Bar Chemical Composition

Grade	Ni	Mo	Cr	Fe	W	Mn	C	Al	Ti	Si
Hastelloy B3	65.0 min	28.5	1.5	1.5	3.0 max	3.0 max	0.01 max	0.50 max	0.2 max	10 max

Hastelloy B3 Round Bars Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
9.2 g/cm3	1370 °C (2550 °F)	Psi – 1,15,000 , MPa –760	Psi – 52,000 , MPa – 350	40%

View Complete Details

Ask Latest Price & Details

EN9 Carbon Steel Round Bar

Thickness 3.0 to 12.0mm
Technique EN9 Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Grade CS EN-9 Round Bar
Diameter 3-~800mm
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Surface Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Condition Hardened & tempered, annealed

Carbon Steel Round Bar/Rods Equivalent Grades

STANDARD	UNS	DIN
CS EN-9 Round Bar	-	-

Carbon Steel Round Bar Chemical Composition

Grade	C	Cr	Ni	Si	S	Mn	P	Mo
EN - 9	.50 - .60	-	-	.05 - .35	.040 MAX	.50 - .80	.040 MAX	-

EN9 Round Bar Mechanical Properties

Heat Treatment	Condition Tons/SQ.inch	Tensile Stress RE MPA	RP0.2 MPA	A min on 5.65so	Impac		Hardness HB	Limited Ruling Section mm
					IZODFT.L.b	KCV Joules
Normalise	45	700	-	12	-	-	201-255	63
	39	600	-	13	-	-	170/223	250
R	45/55	700/850	385	14	-	-	201/277	100
S	50/60	775/925	450	14	-	-	223/277	63
T	55/65	850/1000	555	12	-	-	248/302	19

View Complete Details

Ask Latest Price & Details

Hastelloy C4 Round Bar

Grade Hastelloy C4 (UNS No. N06455)
Specification ASTM B 575 / ASME SB 575
Dimensions ASTM, ASME and API
Size 8 mm - 310 mm.
Length 100 mm to 3000 mm Long & Above
Finish Bright, Polish & Black

Hastelloy C4 Round Bar Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Hastelloy C4	2.4610	N06455

Hastelloy C4 Round Bar Chemical Composition

Grade	Ni	Mo	Cr	Fe	Co	Mn	C	Al	Ti	Si
Hastelloy C4	65.0 min	14 - 17	14 - 18	3.0 max	2.0 max	1.0 max	0.01 max	-	0.7 max	0.08 max

Hastelloy C4 Round Bars Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.64 g/cm3	1350-1400 °C	783	365	55%

View Complete Details

Ask Latest Price & Details

EN36 Carbon Steel Round Bar

Thickness 3.0 to 12.0mm
Technique EN36 Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Grade CS EN-36 Round Bar
Diameter 3-~800mm
Surface Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Condition Hardened & tempered, annealed

View Complete Details

Ask Latest Price & Details

Hastelloy C22 Round Bar

Grade Hastelloy C22 (UNS No. N06022)
Specification ASTM B 574/ ASME SB 574
Dimensions ASTM, ASME and API
Size 3.17mm to 350mm
Length 2m - 6m
Finish Bright, Polish & Black

Hastelloy C22 Round Bar Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	GOST	AFNOR	JIS	OR	EN
Hastelloy C22	2.4602	N06022	-	-	NW 6022	-	NiCr21Mo14W

Hastelloy C22 Round Bar Chemical Composition

Grade

Ni

C

Cr

Co

Fe

Mn

Mo

P

Si

S

W

V

Hastelloy C22

Bal

0.010 max

20 – 22.5

2.5 max

2 – 6

0.50 max

12.5 – 14.5

0.02 max

0.08 max

0.02 max

2.5 – 3.5

0.35 max

Hastelloy C22 Round Bars Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.69 g/cm3	1399 °C (2550 °F)	Psi – 1,00,000 , MPa – 690	Psi – 45000 , MPa – 310	45 %

View Complete Details

Ask Latest Price & Details

Hastelloy C2000 Round Bar

Grade Hastelloy C2000 (UNS No. N06200)
Length 2 mm to 6000 mm Long & Above
Finish Bright, Polish & Black
Specification ASTM B 637 / ASME SB 637
Dimensions ASTM, ASME and API
Size 8 - 350MM

Hastelloy C2000 Round Bar Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Hastelloy C2000	2.4675	N06200

Hastelloy C2000 Round Bar Chemical Composition

Grade	C	Ni	Si	Fe	W	Cr	Co	Mo	Mn	V	P
Hastelloy C2000	.01	Remainder	.08	4.0-7.0	3.0-4.5	14.5-16.5	2.5	15.0-17.0	1.0	.35	.04

Hastelloy C2000 Round Bars Mechanical Properties

Grade	Yield Strength	Tensile Strength	Elongation at break
Hastelloy C2000	310 MPa	690 MPa	45%

View Complete Details

Ask Latest Price & Details

Incoloy 925 Round Bar

Dimension ASTM, ASME and API
Size 5 mm To 500 mm Dia in 100 mm TO 6000 mm Length available with NACE MR 01-75.
Length 100 mm To 3000 mm Long & Above
Grade Incoloy 925 – UNS N09925
Specification ASTM B 805 / ASME SB 805
Finish Bright, Polish & Black

Incoloy 925 Round Bar Equivelent Grades

STANDARD	WERKSTOFF NR.	UNS
Incoloy 925	-	N09925

Incoloy 925 Round Bar Chemical Composition

Grade	Ni	Cr	Fe	Si	Mo	Cu	Mn	C	S	Al
Incoloy 925	42 - 46	19.55 - 22.5	22 min	0.5 max	2.5 - 3.5	1.5 - 3.0	1.0 max	0.03 max	0.03 max	0.1 - 0.5

Incoloy 600 Round Bar Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.14 g/cm3	1343°C	650	300	30 %

View Complete Details

Ask Latest Price & Details

Inconel 600 Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Length 1 to 6 Meters, Custom Cut Lengths
Specifications ASTM B166 / ASME SB166
Range 3.17 MM TO 350 MM DIA
Diameter 25mm to 152mm
Finish Bright, Polish & Black
Condition Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished

Inconel 600 Round Bar Equivelent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	EN
Inconel 600	2.4816	N06600	NCF 600	NiCr15Fe

Inconel 600 Round Bar Chemical Composition

Grade	C	Mn	Si	Fe	S	Cr	Cu	Ni + Co
Inconel 600	0.15 max	1.00 max	0.50 max	6.0 - 10.0	0.015 max	14.0 - 17.0	0.50 max	72.0 min

Incoloy 600 Round Bar Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.47 g/cm3	1413 °C (2580 °F)	Psi - 95,000, MPa - 655	Psi - 45,000, MPa - 310	40 %

View Complete Details

Ask Latest Price & Details

Inconel 601 Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Length 1 to 6 Meters, Custom Cut Lengths
Specifications ASTM B166 / ASME SB166
Range 3.17 MM TO 350 MM DIA
Diameter 25mm to 152mm
Finish Bright, Polish & Black
Condition Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished

Inconel 601 Round Bar Equivelent Grades

STANDARD	UNS	BS	EN	WERKSTOFF NR.	GOST	JIS	OR	AFNOR
Inconel 601	N06601	NA 49	NiCr23Fe	2.4851	XH60BT	NCF 601	ЭИ868	NC23FeA

Inconel 601 Round Bar Chemical Composition

Grade	Ni	Cr	Fe	C	Mn	S	Si	Cu
Inconel 601	58.0 - 63.0	21.0 -25.0	Balance	0.10 max	1.0 max	0.015 max	0.5 max	1.0 max

Incoloy 601 Round Bar Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.1 g/cm3	1411 °C (2571 °F)	Psi – 80,000 , MPa – 550	Psi – 30,000 , MPa – 205	30 %

View Complete Details

Ask Latest Price & Details

Inconel 625 Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Length 1 to 6 Meters, Custom Cut Lengths
Specifications ASTM B446 / ASME SB446
Range 3.17 MM TO 350 MM DIA
Diameter 25mm to 152mm
Finish Bright, Polish & Black
Condition Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished

Inconel 625 Round Bar Equivelent Grades

STANDARD	UNS	WERKSTOFF NR.	AFNOR	EN	JIS	BS	GOST	OR
Inconel 625	N06625	2.4856	NC22DNB4M	NiCr22Mo9Nb	NCF 625	NA 21	ХН75МБТЮ	ЭИ602

Inconel 625 Round Bar Chemical Composition

GRADE

Ni

C

Fe

Si

Mn

S

Al

Ti

Nb + Ta

P

Mo

Cr2

Inconel 625

58.0 min

0.10 max

5.0 max

0.50 max

0.015 max

0.40 max

3.15–4.15

0.015 max

8.0-10.0

20.0-23.0

Incoloy 625 Round Bar Mechanical Properties

Density	Melting Point	Yield Strength (0.2%Offset)	Tensile Strength	Elongation
8.4 g/cm3	1350 °C (2460 °F)	Psi - 75,000 , MPa - 517	Psi - 1,35,000 , MPa -930	42.5 %

View Complete Details

Ask Latest Price & Details

Inconel 718 Round Bar

Grade Inconel 718 – UNS N07718
Dimension ASTM, ASME and API
Length 100 mm To 3000 mm Long & Above
Finish Bright, Polish & Black
Specification ASTM B 637 / ASME SB 637, AMS 5662, AMS 5663, AMS 5664
Size 5 mm To 500 mm
Diameter 0.1 mm to 100 mm

Inconel 718 Round Bar Equivelent Grades

STANDARD	UNS	WNR.
Inconel 718	N07718	2.4668

Inconel 718 Round Bar Chemical Composition

C	Mn	P	S	Si	Cr	Ni	Mo	Cb	Ta	Ti	Al	Co	B	Cu
0.08	0.35	0.015	0.015	0.35	17-21	50-55	2.8-3.30	4.75-5.50	0.05	0.65-1.15	0.20-0.80	1.00	0.006	0.30

Incoloy 718 Round Bar Mechanical Properties

Ultimate Tensile Strength, psi	.2% Yield Strength psi	Elongation %	Hardness Rockwell B
135,000	70,000	45	100

View Complete Details

Ask Latest Price & Details

Inconel 901 Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Length 1 to 6 Meters, Custom Cut Lengths
Specifications ASTM B166 / ASME SB166
Range 3.17 MM TO 350 MM DIA
Diameter 25mm to 152mm
Finish Bright, Polish & Black
Condition Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished

Inconel 901 Round Bar Equivelent Grades

STANDARD	WERKSTOFF NR.	UNS
Inconel 901	2.4662	N09901

Inconel 901 Round Bar Chemical Composition

Element	Content (%)
Nickel, Ni	41-43 .5
Chromium, Cr	11-14
Titanium, Ti	2.2-2.75
Silicon, Si	1 max
Manganese, Mn	0.8 max
Copper, Cu	0.5 max
Aluminum, Al	0.35 max
Carbon, C	0.1 max
Phosphorus, P	0.04 max
Sulfur, S	0.04 max
Boron, B	0.01 – 0.02
Iron, Fe	Remainder

View Complete Details

Ask Latest Price & Details

Stainless Steel 304 Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Grade ASTM A276, ASTM A479, ASTM A565
Length 1 to 6 Meters, Custom Cut Lengths
Material Grade Stainless Steel 304/304L/304H (UNS S30400/UNS S30403/UNS S30409)
Outside Diameter 4mm to 500mm
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish

Stainless Steel 304/304L/304H Round Bar/Rods Equivalent Grades

STANDARD	UNS	WNR.	AFNOR	EN	JIS	BS	GOST
SS 304	S30400	1.4301	Z7CN18‐09	X5CrNi18-10	SUS 304	304S31	08Х18Н10
SS 304L	S30403	1.4306/1.4307	Z3CN18‐10	X2CrNi18-9 / X2CrNi19-11	SUS 304L	304S11	03Х18Н11
SS 304H	S30409	1.4301	-	-	-	-	-

Stainless Steel 304/304L/304H Round Bar Chemical Composition

	C	Mn	Si	P	S	Cr	Ni	N
304	0.07max	2.0max	0.75max	0.045max	0.03max	min: 18.0 max: 20.0	min: 8.0 max: 10.5	—
304L	0.03max	2.0max	0.75max	0.045max	0.03max	min: 18.0 max: 20.0	min: 8.0 max: 12.0	0.10 max
304H	min: 18.0 max:20.0	min: 8.0 max: 10.5	min: 0.04 max:0.10	0.75 max	2.0 max	0.045 max	0.03 max	0.10 max

Stainless Steel 304/304L/304H Bar Mechanical Properties

Grade	Tensile Strength ksi (min)	Yield Strength 0.2% ksi (min)	Elongation %	Hardness (Brinell) MAX	Hardness (Rockwell B) MAX
304	75	30	40	201	92
304L	70	25	40	201	92
304H	75	30	40	201	92

View Complete Details

Ask Latest Price & Details

Stainless Steel 304L Round Bar

Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Standard ASTM A276, ASTM A479, ASTM A565
Outside Diameter 4mm to 500mm
Length 1 to 6 Meters, Custom Cut Lengths
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Material Grade Stainless Steel 304/304L/304H (UNS S30400/UNS S30403/UNS S30409)

Stainless Steel 304/304L/304H Round Bar/Rods Equivalent Grades

STANDARD	UNS	WNR.	AFNOR	EN	JIS	BS	GOST
SS 304	S30400	1.4301	Z7CN18‐09	X5CrNi18-10	SUS 304	304S31	08Х18Н10
SS 304L	S30403	1.4306/1.4307	Z3CN18‐10	X2CrNi18-9 / X2CrNi19-11	SUS 304L	304S11	03Х18Н11
SS 304H	S30409	1.4301	-	-	-	-	-

Stainless Steel 304/304L/304H Round Bar Chemical Composition

	C	Mn	Si	P	S	Cr	Ni	N
304	0.07max	2.0max	0.75max	0.045max	0.03max	min: 18.0 max: 20.0	min: 8.0 max: 10.5	—
304L	0.03max	2.0max	0.75max	0.045max	0.03max	min: 18.0 max: 20.0	min: 8.0 max: 12.0	0.10 max
304H	min: 18.0 max:20.0	min: 8.0 max: 10.5	min: 0.04 max:0.10	0.75 max	2.0 max	0.045 max	0.03 max	0.10 max

Stainless Steel 304/304L/304H Bar Mechanical Properties

Grade	Tensile Strength ksi (min)	Yield Strength 0.2% ksi (min)	Elongation %	Hardness (Brinell) MAX	Hardness (Rockwell B) MAX
304	75	30	40	201	92
304L	70	25	40	201	92
304H	75	30	40	201	92

View Complete Details

Ask Latest Price & Details

Stainless Steel 304H Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Grade ASTM A276, ASTM A479, ASTM A565
Length 1 to 6 Meters, Custom Cut Lengths
Outside Diameter 4mm to 500mm
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Material Grade Stainless Steel 304/304L/304H (UNS S30400/UNS S30403/UNS S30409)

Stainless Steel 304/304L/304H Round Bar/Rods Equivalent Grades

STANDARD	UNS	WNR.	AFNOR	EN	JIS	BS	GOST
SS 304	S30400	1.4301	Z7CN18‐09	X5CrNi18-10	SUS 304	304S31	08Х18Н10
SS 304L	S30403	1.4306/1.4307	Z3CN18‐10	X2CrNi18-9 / X2CrNi19-11	SUS 304L	304S11	03Х18Н11
SS 304H	S30409	1.4301	-	-	-	-	-

Stainless Steel 304/304L/304H Round Bar Chemical Composition

	C	Mn	Si	P	S	Cr	Ni	N
304	0.07max	2.0max	0.75max	0.045max	0.03max	min: 18.0 max: 20.0	min: 8.0 max: 10.5	—
304L	0.03max	2.0max	0.75max	0.045max	0.03max	min: 18.0 max: 20.0	min: 8.0 max: 12.0	0.10 max
304H	min: 18.0 max:20.0	min: 8.0 max: 10.5	min: 0.04 max:0.10	0.75 max	2.0 max	0.045 max	0.03 max	0.10 max

Stainless Steel 304/304L/304H Bar Mechanical Properties

Grade	Tensile Strength ksi (min)	Yield Strength 0.2% ksi (min)	Elongation %	Hardness (Brinell) MAX	Hardness (Rockwell B) MAX
304	75	30	40	201	92
304L	70	25	40	201	92
304H	75	30	40	201	92

View Complete Details

Ask Latest Price & Details

Stainless Steel 309 Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Grade ASTM A276, ASTM A479, ASTM A565
Length 1 to 6 Meters, Custom Cut Lengths
Outside Diameter 4mm to 500mm
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Material Grade Stainless Steel 309 (UNS S30900)

Stainless Steel 309 Round Bar Equivalent Grades

Standard	Werkstoff Nr.	UNS
SS 309	1.4828	S30900

Stainless Steel 309 Round Bar Chemical Composition

	C	Mn	Si	P	S	Cr	Ni	Fe
309	0.2 max	2.0 max	1.0 max	0.045max	0.03max	22 24	12-15	Balance

Stainless Steel 309 Bar Mechanical Properties

Grade	Tensile Strength ksi (min)	Yield Strength 0.2% ksi (min)	Elongation %	Hardness (Brinell) MAX
309	40	30	40	217

View Complete Details

Ask Latest Price & Details

Stainless Steel 310 Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Grade ASTM A276, ASTM A479, ASTM A565
Length 1 to 6 Meters, Custom Cut Lengths
Outside Diameter 4mm to 500mm
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Material Grade Stainless Steel 310/310S (UNS S31000/ UNS S31008)

Stainless Steel 310/310S Round Bar/Rods Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
SS 310	1.4841	S31000	SUS 310	310S24	20Ch25N20S2	–	X15CrNi25-20
SS 310S	1.4845	S31008	SUS 310S	310S16	20Ch23N18	–	X8CrNi25-21

Stainless Steel 310/310S Round Bar Chemical Composition

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	Fe
SS 310	0.015 max	2 max	0.15 max	0.20 max	0.015 max	24-26	0.15 max	19-21	54.7 min
SS 310S	0.08 max	2 max	1.0 max	0.045 max	0.030 max	24 – 26	0.75 max	19 – 21	53.095 min

Stainless Steel 310/310S Bar Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
7.9 g/cm3	1402 °C (2555 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	40 %

View Complete Details

Ask Latest Price & Details

Stainless Steel 310S Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Grade ASTM A276, ASTM A479, ASTM A565
Length 1 to 6 Meters, Custom Cut Lengths
Outside Diameter 4mm to 500mm
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Material Grade Stainless Steel 310/310S (UNS S31000/ UNS S31008)

Stainless Steel 310/310S Round Bar/Rods Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
SS 310	1.4841	S31000	SUS 310	310S24	20Ch25N20S2	–	X15CrNi25-20
SS 310S	1.4845	S31008	SUS 310S	310S16	20Ch23N18	–	X8CrNi25-21

Stainless Steel 310/310S Round Bar Chemical Composition

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	Fe
SS 310	0.015 max	2 max	0.15 max	0.20 max	0.015 max	24-26	0.15 max	19-21	54.7 min
SS 310S	0.08 max	2 max	1.0 max	0.045 max	0.030 max	24 – 26	0.75 max	19 – 21	53.095 min

Stainless Steel 310/310S Bar Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
7.9 g/cm3	1402 °C (2555 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	40 %

View Complete Details

Ask Latest Price & Details

Stainless Steel 316 Round Bar

Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Standard ASTM A276, ASTM A479, ASTM A565
Outside Diameter 4mm to 500mm
Length 1 to 6 Meters, Custom Cut Lengths
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Material Grade Stainless Steel 316/316L (UNS S31600/ UNS S31603)

Stainless Steel 316/316L Round Bar/Rods Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
SS 316	1.4401 / 1.4436	S31600	SUS 316	316S31 / 316S33	–	Z7CND17‐11‐02	X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L	1.4404 / 1.4435	S31603	SUS 316L	316S11 / 316S13	03Ch17N14M3 / 03Ch17N14M2	Z3CND17‐11‐02 / Z3CND18‐14‐03	X2CrNiMo17-12-2 / X2CrNiMo18-14-3

Stainless Steel 316/316L Round Bar Chemical Composition

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	Fe
SS 316	0.015 max	2 max	1.0 max	0.045 max	0.030 max	16.0-18.0	2.0-3.0	11.0-14.0	67.845 min
SS 316L	0.035 max	2 max	1.0 max	0.045 max	0.030 max	16.0-18.0	2.0-3.0	10.0-14.0	68.89 min

Stainless Steel 316/316L Bar Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.0 g/cm3	1400 °C (2550 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	35 %

View Complete Details

Ask Latest Price & Details

Stainless Steel 316L Round Bar

Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Standard ASTM A276, ASTM A479, ASTM A565
Outside Diameter 4mm to 500mm
Length 1 to 6 Meters, Custom Cut Lengths
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Material Grade Stainless Steel 316/316L (UNS S31600/ UNS S31603)

Stainless Steel 316/316L Round Bar/Rods Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
SS 316	1.4401 / 1.4436	S31600	SUS 316	316S31 / 316S33	–	Z7CND17‐11‐02	X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L	1.4404 / 1.4435	S31603	SUS 316L	316S11 / 316S13	03Ch17N14M3 / 03Ch17N14M2	Z3CND17‐11‐02 / Z3CND18‐14‐03	X2CrNiMo17-12-2 / X2CrNiMo18-14-3

Stainless Steel 316/316L Round Bar Chemical Composition

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	Fe
SS 316	0.015 max	2 max	1.0 max	0.045 max	0.030 max	16.0-18.0	2.0-3.0	11.0-14.0	67.845 min
SS 316L	0.035 max	2 max	1.0 max	0.045 max	0.030 max	16.0-18.0	2.0-3.0	10.0-14.0	68.89 min

Stainless Steel 316/316L Bar Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.0 g/cm3	1400 °C (2550 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	35 %

View Complete Details

Ask Latest Price & Details

Stainless Steel 316H Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Grade ASTM A276, ASTM A479, ASTM A565
Length 1 to 6 Meters, Custom Cut Lengths
Outside Diameter 4mm to 500mm
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Material Grade Stainless Steel 316H (UNS S30409)

Stainless Steel 316H Round Bar/Rods Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
SS 304H	1.4301	S30409

Stainless Steel 316H Round Bar Chemical Composition

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N
SS 304H	0.10 max	2 max	0.75 max	0.045 max	0.030 max	18 – 20	–	8 – 10.5	–

Stainless Steel 316H Bar Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.0 g/cm3	1400 °C (2550 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	40 %

View Complete Details

Ask Latest Price & Details

Stainless Steel 317 Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Grade ASTM A276, ASTM A479, ASTM A565
Length 1 to 6 Meters, Custom Cut Lengths
Outside Diameter 4mm to 500mm
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Material Grade Stainless Steel 317/317L (UNS S31700/ UNS S31703)

Stainless Steel 317/317L Round Bar/Rods Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
SS 317	1.4449	S31700	SUS 317	–	–	–	–
SS 317L	1.4438	S31703	SUS 317L	–	–	–	–

Stainless Steel 317/317L Round Bar Chemical Composition

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	Fe
SS 317	0.08 max	2 max	1.0 max	0.045 max	0.030 max	18 – 20	3.0-4.0	11.0-15.0	57.845 min
SS 317L	0.035 max	2 max	1.0 max	0.045 max	0.030 max	18 – 20	3.0-4.0	11.0-15.0	57.89 min

Stainless Steel 317/317L Bar Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.0 g/cm3	1400 °C (2550 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	35 %

View Complete Details

Ask Latest Price & Details

Stainless Steel 317L Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Grade ASTM A276, ASTM A479, ASTM A565
Length 1 to 6 Meters, Custom Cut Lengths
Outside Diameter 4mm to 500mm
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Material Grade Stainless Steel 317/317L (UNS S31700/ UNS S31703)

Stainless Steel 317/317L Round Bar/Rods Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
SS 317	1.4449	S31700	SUS 317	–	–	–	–
SS 317L	1.4438	S31703	SUS 317L	–	–	–	–

Stainless Steel 317/317L Round Bar Chemical Composition

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	Fe
SS 317	0.08 max	2 max	1.0 max	0.045 max	0.030 max	18 – 20	3.0-4.0	11.0-15.0	57.845 min
SS 317L	0.035 max	2 max	1.0 max	0.045 max	0.030 max	18 – 20	3.0-4.0	11.0-15.0	57.89 min

Stainless Steel 317/317L Bar Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.0 g/cm3	1400 °C (2550 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	35 %

View Complete Details

Ask Latest Price & Details

Stainless Steel 321 Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Grade ASTM A276, ASTM A479, ASTM A565
Length 1 to 6 Meters, Custom Cut Lengths
Outside Diameter 4mm to 500mm
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Material Grade Stainless Steel 321/321H (UNS S32100/ UNS S32109)

Stainless Steel 321/321H Round Bar/Rods Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	EN
SS 321	1.4541	S32100	SUS 321	X6CrNiTi18-10
SS 321H	1.4878	S32109	SUS 321H	X12CrNiTi18-9

Stainless Steel 321/321H Round Bar Chemical Composition

Grade	C	Mn	Si	P	S	Cr	N	Ni	Ti
SS 321	0.08 max	2.0 max	1.0 max	0.045 max	0.030 max	17.00 – 19.00	0.10 max	9.00 – 12.00	5(C+N) – 0.70 max
SS 321H	0.04 – 0.10	2.0 max	1.0 max	0.045 max	0.030 max	17.00 – 19.00	0.10 max	9.00 – 12.00	4(C+N) – 0.70 max

Stainless Steel 321/321H Bar Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.0 g/cm3	1457 °C (2650 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	35 %

View Complete Details

Ask Latest Price & Details

Stainless Steel 321H Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Grade ASTM A276, ASTM A479, ASTM A565
Length 1 to 6 Meters, Custom Cut Lengths
Outside Diameter 4mm to 500mm
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Material Grade Stainless Steel 321/321H (UNS S32100/ UNS S32109)

Stainless Steel 321/321H Round Bar/Rods Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	EN
SS 321	1.4541	S32100	SUS 321	X6CrNiTi18-10
SS 321H	1.4878	S32109	SUS 321H	X12CrNiTi18-9

Stainless Steel 321/321H Round Bar Chemical Composition

Grade	C	Mn	Si	P	S	Cr	N	Ni	Ti
SS 321	0.08 max	2.0 max	1.0 max	0.045 max	0.030 max	17.00 – 19.00	0.10 max	9.00 – 12.00	5(C+N) – 0.70 max
SS 321H	0.04 – 0.10	2.0 max	1.0 max	0.045 max	0.030 max	17.00 – 19.00	0.10 max	9.00 – 12.00	4(C+N) – 0.70 max

Stainless Steel 321/321H Bar Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.0 g/cm3	1457 °C (2650 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	35 %

View Complete Details

Ask Latest Price & Details

Stainless Steel 347 Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Grade ASTM A276, ASTM A479, ASTM A565
Length 1 to 6 Meters, Custom Cut Lengths
Outside Diameter 4mm to 500mm
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Material Grade Stainless Steel 347/347H (UNS S34700/ UNS S34709)

Stainless Steel 347/347H Round Bar/Rods Equivalent Grades

STANDARD	UNS	WNR.	JIS	EN
SS 347	S34700	1.4550	SUS 347	X6CrNiNb18-10
SS 347H	S34709	1.4961	SUS 347H	X6CrNiNb18-12

Stainless Steel 347/347H Round Bar Chemical Composition

	C	Cr	Mn	Ni	P	S	Si	Cb/Ta
347	0.08 max	min: 17.0 max: 20.0	2.0 max	min: 9.0 max: 13.0	0.04 max	0.30 max	0.75 max	min:10x C max: 1.0
347H	min: 0.04 max: 0.10	min: 17.0 max: 20.0	2.0 max	min: 9.0 max: 13.0	0.03 max	0.30 max	0.75 max	min:10x C max: 1.0

Stainless Steel 347/347H Bar Mechanical Properties

Grade	Tensile Strength ksi (MPa) min	Yield Strength 0.2% ksi offset ksi (MPa) min	Elongation (% in 50mm) min	Hardness (Brinell) MAX	Hardness (Rockwell B) MAX
347/347H	75 (515)	30 (205)	40	201	95

View Complete Details

Ask Latest Price & Details

Stainless Steel 347H Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Grade ASTM A276, ASTM A479, ASTM A565
Length 1 to 6 Meters, Custom Cut Lengths
Outside Diameter 4mm to 500mm
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Material Grade Stainless Steel 347/347H (UNS S34700/ UNS S34709)

Stainless Steel 347/347H Round Bar/Rods Equivalent Grades

STANDARD	UNS	WNR.	JIS	EN
SS 347	S34700	1.4550	SUS 347	X6CrNiNb18-10
SS 347H	S34709	1.4961	SUS 347H	X6CrNiNb18-12

Stainless Steel 347/347H Round Bar Chemical Composition

	C	Cr	Mn	Ni	P	S	Si	Cb/Ta
347	0.08 max	min: 17.0 max: 20.0	2.0 max	min: 9.0 max: 13.0	0.04 max	0.30 max	0.75 max	min:10x C max: 1.0
347H	min: 0.04 max: 0.10	min: 17.0 max: 20.0	2.0 max	min: 9.0 max: 13.0	0.03 max	0.30 max	0.75 max	min:10x C max: 1.0

Stainless Steel 347/347H Bar Mechanical Properties

Grade	Tensile Strength ksi (MPa) min	Yield Strength 0.2% ksi offset ksi (MPa) min	Elongation (% in 50mm) min	Hardness (Brinell) MAX	Hardness (Rockwell B) MAX
347/347H	75 (515)	30 (205)	40	201	95

View Complete Details

Ask Latest Price & Details

Stainless Steel 904L Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Grade ASTM A276, ASTM A479, ASTM A565
Length 1 to 6 Meters, Custom Cut Lengths
Outside Diameter 4mm to 500mm
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Material Grade Stainless Steel 904L (UNS N08904)

Stainless Steel 904L Round Bar/Rods Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	KS	AFNOR	EN
SS 904L	1.4539	N08904	SUS 904L	904S13	STS 317J5L	Z2 NCDU 25-20	X1NiCrMoCu25-20-5

Stainless Steel 904L Round Bar Chemical Composition

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	Cu
SS 904L	0.020 max	2.00 max	1.00 max	0.040 max	0.030 max	19.00 – 23.00	4.00 – 5.00 max	23.00 – 28.00	1.00 – 2.00

Stainless Steel 904L Bar Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
7.95 g/cm3	1350 °C (2460 °F)	Psi – 71000 , MPa – 490	Psi – 32000 , MPa – 220	35 %

View Complete Details

Ask Latest Price & Details

Super Duplex Steel UNS S32750 Round Bar

Grade ASTM A276, ASME SA276
Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Length 1 to 6 Meters, Custom Cut Lengths
Size 6 mm to 120 mm.
Diameter 6mm to 350mm Diameter
Grades S32750
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish

Super Duplex Steel UNS S32750 Bars Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	SAF
Super Duplex S32750	1.4410	S32750	2507

Super Duplex Steel UNS S32750 Round Bar Chemical Composition

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N	Fe
S32750	0.030 max	1.20 max	0.80 max	0.035 max	0.020 max	24.00 – 26.00	3.00 – 5.00	6.00 – 8.00	0.24 – 0.32	58.095 min

Super Duplex Steel UNS S32750 Round Bars Mechanical Properties

UNS No	Grade	Proof Stress 0.2% (MPa)	Tensile Strength (MPa)	Elongation A5(%)	Hardness Max
					HB	HRB
S32750	2507	550	795	15	310	32*

View Complete Details

Ask Latest Price & Details

Super Duplex Steel UNS S32760 Round Bar

Grade ASTM A276, ASME SA276
Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Size 6 mm to 120 mm
Length 1 to 6 Meters, Custom Cut Lengths
Diameter 6mm to 350mm Diameter
Grades S32760
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish

Super Duplex Steel UNS S32760 Bars Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	SAF
Super Duplex S32760	1.4410	S32760	2507

Super Duplex Steel UNS S32760 Round Bar Chemical Composition

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N	Fe
S32760	0.05 max	1.00 max	1.00 max	0.030 max	0.010 max	24.00 – 26.00	3.00 – 4.00	6.00 – 8.00	0.20 – 0.30	57.61 min

Super Duplex Steel UNS S32760 Round Bars Mechanical Properties

Grades	Density (g/cm 3)	Density (lb/in 3)	Melting Point (°C)	Melting Point (°F)
S32760	7.8	0.281	1350	2460Standard

View Complete Details

Ask Latest Price & Details

Titanium Grade 1 Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Length Bar cutting to 650mm
Standard ASTM B348, ASTM F136, ASTM F67, ASTM F136, ISO-5832-2(3), AMS4928, MIL-T-9047G, JIS etc
Minimum diameter 0.040 inch or 1.00 mm
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Material Grade Titanium Grade 1
Maximum diameter 14.000 inch or 400.00 mm

Titanium Grade 1 Bars Equivalent Grades

STANDARD	UNS	WNR.
Titanium Gr 1	R50250	3.7025

Titanium Grade 1 Round Bar Chemical Composition

Grade	C	N	O	H	Ti	Fe
Titanium Gr 1	.08 max	.03 max	.18 max	.015 max	Bal	.20 max

Titanium Grade 1 Round Bars Mechanical Properties

Grade	Tensile (ksi)	Yield Strength (ksi)	Elongation %
Titanium Gr 1	240	170	24

View Complete Details

Ask Latest Price & Details

Titanium Grade 2 Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Grade Titanium Grade 2 (UNS No. R50400) Round Bars 3.7035
Application Chemical process, Food processing, Petrochemical, Pollution control, Pulp and Paper, Refining
Standard ASTM B348 / ASME SB348
Size Dia 6.0-200mm x Length 1000-6000mm
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Surface Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline
Condition Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished.

Titanium Grade 2 Bars Equivalent Grades

STANDARD	UNS	WNR.
Titanium Gr 2	R50400	3.7035

Titanium Grade 2 Round Bar Chemical Composition

Grade	C	N	O	H	Ti	Fe
Titanium Gr 2	0.10 max	0.03 max	0.25 max	0.015 max	bal	0.30 max

Titanium Grade 2 Round Bars Mechanical Properties

Grade	Tensile (ksi)	Yield Strength (ksi)	Hardness
Titanium Gr 2	50	40	14.9

View Complete Details

Ask Latest Price & Details

Titanium Grade 5 Round Bar

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Length Bar cutting to 650mm
Standard ASTM B348, ASTM F136, ASTM F67, ASTM F136, ISO-5832-2(3), AMS4928, MIL-T-9047G, JIS etc
Minimum diameter 0.040 inch or 1.00 mm
Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Material Grade Titanium Grade 5
Maximum diameter 14.000 inch or 400.00 mm
Condition Hardened & tempered, annealed

Titanium Grade 5/Ti6al4v Bars Equivalent Grades

STANDARD	UNS	WNR.
Titanium Gr 5	R56400	3.7165

Titanium Grade Ti6al4v Round Bar Chemical Composition

Grade	Ti	C	Fe	Al	V	O
Titanium Grade 5	90 min	–	0.25 max	6 min	4 min	0.02 max

Titanium Grade 5 Round Bars Mechanical Properties

lement	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Titanium Gr. 5	4.43 g/cm3	1632 °C (2970 °F)	Psi – 138000 , MPa – 950	Psi – 128000 , MPa – 880	14 %

View Complete Details

Ask Latest Price & Details

Haynes Round Bar

Diameter 3-~800mm
Surface Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Technique Haynes Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Condition Hardened & tempered, annealed
Form Haynes Round Bar

View Complete Details

Ask Latest Price & Details

Inconel Sheet

Number Of Flower Cold Rolled Inconel Sheet & Plate
Material 800HT
Standard ASTM B168, ASME SB168, ASTM/ASME SB424, ASTM/ASME SB443, UNS NO6600, BS EN 10088-2, EN 10028-7, IS 6911
Size 15NB to 150NB
Diameter 6mm - 90mm

View Complete Details

Ask Latest Price & Details

Hastelloy Sheet

Material Hastelloy C276, Hastelloy C22, Hastelloy X, Hastelloy C2000, Hastelloy C4, Hastelloy B2, B3
Number Of Flower Hot Rolled Hastelloy Sheet & Plate, Cold Rolled Hastelloy Sheet & Plate
Standard ASTM B575 / ASME SB575, ASTM B333 / ASME SB333
Size 6 mm to 120 mm
Diameter 6mm - 90mm

View Complete Details

Ask Latest Price & Details

Hastelloy B2 Sheet

Thickness 0.3 mm to 120 mm
Density 9.2 g/cm3
Melting Point 1370 °C (2500 ºF )
Tensile Strength Psi – 1, 10, 000 , MPa – 760
Yield Strength (0.2%Offset) Psi – 51000 , MPa – 350
Elongation 40 %
Specifications ASTM B575 / ASME SB575, BS EN 10088-2, en 10028-7, IS 6911
Dimension Standard MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc

Hastelloy B2 Sheet & Plate Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS
Hastelloy B2	2.4617	N10665	NW 0665

Hastelloy B2 Sheet & Plate Chemical Composition

Grade	C	Mn	Si	S	Co	Ni	Cr	Fe	Mo	P
Hastelloy B2	0.02 max	1.0 max	0.1 max	0.03 max	1.0 max	Bal	1.0 max	2.0 max	26 – 30	0.04 max

View Complete Details

Ask Latest Price & Details

Hastelloy B3 Sheet

Thickness 0.1mm to 12 mm Thk
Specifications ASTM B333 / ASME SB333
Width 1000mm / 1219mm /1250mm / 1500mm / 2000mm
Length 2000 mm / 2440 mm / 2500 mm / 3000 mm / 6000 mm
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Finish Hot rolled plate (HR), Cold rolled sheet (CR).

Hastelloy B3 Sheet & Plate Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Hastelloy B3	2.4600	N010675

Hastelloy B3 Sheet & Plate Chemical Composition

Grade	C	Mn	Si	Cu	Co	Ni	Cr	Fe	Mo	Ti
Hastelloy B3	0.01 max	3.0 max	0.10 max	0.20 max	3.0 max	65.0 min	1.5 max	1.5 max	28.5 max	0.2 max

Hastelloy B3 Sheet & Plate Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Hastelloy B3	9.2 g/cm3	1370 °C (2550 °F)	Psi – 1,15,000 , MPa –760	Psi – 52,000 , MPa – 350	40 %

View Complete Details

Ask Latest Price & Details

Hastelloy C4 Plate

Size 0.5 MM TO 200 MM THICK IN 1000 MM TO 2500 MM WIDTH & 2500 MM TO 12500 MM LENGTH
Specifications ASTM B575 / ASME SB575
Standard ASTM, ASME and API
Specialize Shim Sheet, Designer Sheet, B. Q. Profile.
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Grade Hastelloy C4 (UNS N06455)

Hastelloy C4 Sheet & Plate Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Hastelloy C4	2.4610	N06455

Hastelloy C4 Sheet & Plate Chemical Composition

Grade	Ni	Cr	Mo	Fe	C	Mn	Si	Co	Ti	S	P
Hastelloy C4	Bal	14.5-17.5	14.0-17.0	Max 3.0	Max 0.009	Max 1.0	Max 0.05	Max 2.0	Max 0.7	Max 0.010	Max 0.025

Hastelloy C4 Sheet & Plate Mechanical Properties

Grade	Tensile Strength	Yield Strength RP0.2%	Elongation A5%	Mean Coefficient of Thermal Expansion
Hastelloy C4	690 N/mm²	1335°C-1380°C	275 N/mm²	40%

View Complete Details

Ask Latest Price & Details

Hastelloy C22 Plate

Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness 0.3 mm to 120 mm
Hardness Half Hard, Soft, Hard, Quarter Hard, Spring Hard
Specifications ASTM B575 / ASME SB575, BS EN 10088-2, en 10028-7, IS 6911
Standard MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc
Size Range Cold rolled ASME SB575 Grade C22 Hastelloy Sheet 0.5-6.4 mm, Hot rolled ASME SB575 Grade C22 Hastelloy Sheet 3.0–10.0 mm
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc

Hastelloy C22 Sheet & Plate Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	EN
Hastelloy C22	2.4602	N06022	NW 6022	NiCr21Mo14W

Hastelloy C22 Sheet & Plate Chemical Composition

Grade

C

Mn

Si

Co

P

Fe

Mo

Ni

Cr

S

W

V

Hastelloy C22

0.010 max

0.50 max

0.08 max

2.5 max

0.02 max

2 – 6

12.5 – 14.5

Bal

20 – 22.5

0.02 max

2.5 – 3.5

0.35 max

Hastelloy C22 Sheet & Plate Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.69 g/cm3	1399 °C (2550 °F)	Psi – 1,00,000 , MPa – 690	Psi – 45000 , MPa – 310	45%

View Complete Details

Ask Latest Price & Details

Hastelloy C276 Plate

Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness 0.3 mm to 120 mm
Hardness Half Hard, Soft, Hard, Quarter Hard, Spring Hard
Specifications ASTM B575 / ASME SB575, BS EN 10088-2, en 10028-7, IS 6911
Standard MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc
Size Range Cold rolled ASME SB575 Grade C276 Hastelloy Sheet 0.5-6.4 mm, Hot rolled ASME SB575 Grade C276 Hastelloy Sheet 3.0–10.0 mm
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc

Hastelloy C276 Sheet & Plate Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	EN
Hastelloy C276	2.4819	N10276	NW 0276	NiMo16Cr15W

Hastelloy C276 Sheet & Plate Chemical Composition

Grade	C	Mn	Si	S	Co	Ni	Cr	Fe	Mo	P
C276	0.010 max	1.00 max	0.08 max	0.03 max	2.50 max	50.99 min*	14.50 – 16.50	4.00 – 7.00	15.00 – 17.00	0.04 max

Hastelloy C276 Sheet & Plate Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Hastelloy C276	8.89 g/cm3	1370 °C (2500 °F)	Psi – 1,15,000 , MPa – 790	Psi – 52,000 , MPa – 355	40 %

View Complete Details

Ask Latest Price & Details

Hastelloy C2000 Plate

Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness 0.1mm to 12 mm Thk
Form Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Specifications ASTM B575 / ASME SB575
Dimension ASTM, ASME, and API
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc

Hastelloy C2000 Sheet & Plate Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	AWS
Hastelloy C2000	2.4675	N06200	AWS 055

Hastelloy C2000 Sheet & Plate Chemical Composition

Alloy (UNS)	Ni	Cr	Mo	W	Cu	Fe	Carbon
C2000 (N06200)	Bal	22.00-24.00	15.00-17.00	–	1.30-1.90	3.00 max.	0.010max.

Hastelloy C2000 Sheet & Plate Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Hastelloy C2000	8.89 g/cm3	1065 °C (1950 °F)	752 MPa (109.0 ksi)	358 MPa (52.0 ksi)	64 %

View Complete Details

Ask Latest Price & Details

Hastelloy X Plate

Length 2000 mm / 2440 mm / 2500 mm / 3000 mm / 6000 mm
Thickness 0.1mm to 12 mm Thk
Specifications ASTM B435 / ASME SB435
Width 1000mm / 1219mm /1250mm / 1500mm / 2000mm
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Finish Hot rolled plate (HR), Cold rolled sheet (CR).

Hastelloy X Sheet & Plate Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Hastelloy X	2.4665	N06002

Hastelloy X Sheet & Plate Chemical Composition

Grade	C	Mn	Si	Cu	Co	Ni	Cr	Fe	Mo	Ti
Hastelloy X	0.05 - 0.15	1.0 max	1.0 max	0.50 max	0.5 - 2.5	Remainder	20.5-23.0	17.0-20.0	8.0-10.0	0.15 max

Hastelloy X Sheet & Plate Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Hastelloy X	8.22 g/cm³	1355°C	655 MPa	240 MPa	35 %

View Complete Details

Ask Latest Price & Details

Incoloy 800 Plate

Thickness 0.1mm to 12 mm Thk
Specifications ASTM B409 / ASME SB409
Width 1000mm / 1219mm /1250mm / 1500mm / 2000mm
Length 2000 mm / 2440 mm / 2500 mm / 3000 mm / 800 / 800H / 800HT0 mm
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Finish Hot rolled plate (HR), Cold rolled sheet (CR)

Incoloy 800 / 800H / 800HT Sheet & Plate Chemical Properties

Grade	Ni	Fe	Cr	Cu	Ti	Al	C	Mn	S	Si
Incoloy 800	30.0-35.0	39.5 min	19.0-23.0	.75 max	.15-.60	.15-.60	.1 max	1.5 max	.015 max	1.0 max
Incoloy 800H	30.0-35.0	39.5 min	19.0-23.0	.75 max	.15-.60	.15-.60	.05-.10 max	1.5 max	.015 max	1.0 max
Incoloy 800HT	30.0-35.0	39.5 min	19.0-23.0	.75 max	.25-.60	.85-1.20	.06-.10 max	1.5 max	.015 max	1.0 max

Incoloy 800 / 800H / 800HT Sheet & Plate Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
7.94 g/cm3	1350-1400 °C	Psi - 75,000 , MPa -520	Psi - 30,000 , MPa - 205	30 - 35 %

Incoloy 800 / 800H / 800HT Sheet & Plate Equivalent Grades

STANDARD	UNS	WNR.	AFNOR	EN	JIS	BS	GOST	OR
Incoloy 800	N08800	1.4876	Z8NC32-21	X10NiCrAlTi32-20	NCF 800	NA 15	ЭИ670	XH32T
Incoloy 800H	N08810	1.4958	Z8NC32-21	X10NiCrAlTi32-20	NCF 800H	NA 15(H)	ЭИ670	XH32T
Incoloy 800HT	N08811	1.4959	-	X8NiCrAlTi32-21	NCF 800HT	NA 15(HT)	ЭИ670	XH32T

View Complete Details

Ask Latest Price & Details

Incoloy 800H Plate

Width 1000mm / 1219mm /1250mm / 1500mm / 2000mm
Length 2000 mm / 2440 mm / 2500 mm / 3000 mm / 800 / 800H / 800HT0 mm
Thickness 0.1mm to 12 mm Thk
Specifications ASTM B409 / ASME SB409
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Finish Hot rolled plate (HR), Cold rolled sheet (CR)

Incoloy 800 / 800H / 800HT Sheet & Plate Chemical Properties

Grade	Ni	Fe	Cr	Cu	Ti	Al	C	Mn	S	Si
Incoloy 800	30.0-35.0	39.5 min	19.0-23.0	.75 max	.15-.60	.15-.60	.1 max	1.5 max	.015 max	1.0 max
Incoloy 800H	30.0-35.0	39.5 min	19.0-23.0	.75 max	.15-.60	.15-.60	.05-.10 max	1.5 max	.015 max	1.0 max
Incoloy 800HT	30.0-35.0	39.5 min	19.0-23.0	.75 max	.25-.60	.85-1.20	.06-.10 max	1.5 max	.015 max	1.0 max

Incoloy 800 / 800H / 800HT Sheet & Plate Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
7.94 g/cm3	1350-1400 °C	Psi - 75,000 , MPa -520	Psi - 30,000 , MPa - 205	30 - 35 %

Incoloy 800 / 800H / 800HT Sheet & Plate Equivalent Grades

STANDARD	UNS	WNR.	AFNOR	EN	JIS	BS	GOST	OR
Incoloy 800	N08800	1.4876	Z8NC32-21	X10NiCrAlTi32-20	NCF 800	NA 15	ЭИ670	XH32T
Incoloy 800H	N08810	1.4958	Z8NC32-21	X10NiCrAlTi32-20	NCF 800H	NA 15(H)	ЭИ670	XH32T
Incoloy 800HT	N08811	1.4959	-	X8NiCrAlTi32-21	NCF 800HT	NA 15(HT)	ЭИ670	XH32T

View Complete Details

Ask Latest Price & Details

Incoloy 800HT Plate

Width 1000mm / 1219mm /1250mm / 1500mm / 2000mm
Length 2000 mm / 2440 mm / 2500 mm / 3000 mm / 800 / 800H / 800HT0 mm
Thickness 0.1mm to 12 mm Thk
Specifications ASTM B409 / ASME SB409
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Finish Hot rolled plate (HR), Cold rolled sheet (CR)

Incoloy 800 / 800H / 800HT Sheet & Plate Chemical Properties

Grade	Ni	Fe	Cr	Cu	Ti	Al	C	Mn	S	Si
Incoloy 800	30.0-35.0	39.5 min	19.0-23.0	.75 max	.15-.60	.15-.60	.1 max	1.5 max	.015 max	1.0 max
Incoloy 800H	30.0-35.0	39.5 min	19.0-23.0	.75 max	.15-.60	.15-.60	.05-.10 max	1.5 max	.015 max	1.0 max
Incoloy 800HT	30.0-35.0	39.5 min	19.0-23.0	.75 max	.25-.60	.85-1.20	.06-.10 max	1.5 max	.015 max	1.0 max

Incoloy 800 / 800H / 800HT Sheet & Plate Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
7.94 g/cm3	1350-1400 °C	Psi - 75,000 , MPa -520	Psi - 30,000 , MPa - 205	30 - 35 %

Incoloy 800 / 800H / 800HT Sheet & Plate Equivalent Grades

STANDARD	UNS	WNR.	AFNOR	EN	JIS	BS	GOST	OR
Incoloy 800	N08800	1.4876	Z8NC32-21	X10NiCrAlTi32-20	NCF 800	NA 15	ЭИ670	XH32T
Incoloy 800H	N08810	1.4958	Z8NC32-21	X10NiCrAlTi32-20	NCF 800H	NA 15(H)	ЭИ670	XH32T
Incoloy 800HT	N08811	1.4959	-	X8NiCrAlTi32-21	NCF 800HT	NA 15(HT)	ЭИ670	XH32T

View Complete Details

Ask Latest Price & Details

Inconel 600 Sheet

Width 1000mm / 1219mm /1250mm / 1500mm / 2000mm
Length 2000 mm / 2440 mm / 2500 mm / 3000 mm / 6000 mm
Thickness 0.1mm to 12 mm Thk
Specifications ASTM B168 / ASME SB168, AMS 5540
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Finish Hot rolled plate (HR), Cold rolled sheet (CR)

Inconel 600 Sheet & Plate Chemical Properties

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr
Inconel 600	0.15 max	1.00 max	0.50 max	0.015max	0.50 max	6.00 – 10.00	72.00 min	14.00 – 17.00

Inconel 600 Sheet & Plate Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Inconel 600	8.47 g/cm3	1413 °C (2580 °F)	Psi – 95,000 , MPa – 655	Psi – 45,000 , MPa – 310	40 %

Inconel 600 Sheet & Plate Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
Inconel 600	2.4816	N06600	NCF 600	NA 13	МНЖМц 28-2,5-1,5	NC15FE11M	NiCr15Fe

View Complete Details

Ask Latest Price & Details

Inconel 601 Plate

Width 1000mm / 1219mm /1250mm / 1500mm / 2000mm
Length 2000 mm / 2440 mm / 2500 mm / 3000 mm / 6010 mm
Thickness 0.1mm to 12 mm Thk
Specifications ASTM B168 / ASME SB168, AMS 5540
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Finish Hot rolled plate (HR), Cold rolled sheet (CR)

Inconel 601 Sheet & Plate Chemical Properties

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr
601	0.10 max	1.0 max	0.5 max	0.015 max	1.0 max	Balance	58.0 – 63.0	21.0 – 25.0

Inconel 601 Sheet & Plate Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Inconel 601	8.1 g/cm3	1411 °C (2571 °F)	Psi – 80,000 , MPa – 550	Psi – 30,000 , MPa – 205	30 %

Inconel 601 Sheet & Plate Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
601	2.4851	N06601	NCF 601	NA 49	XH60BT	NC23FeA	NiCr23Fe

View Complete Details

Ask Latest Price & Details

Inconel 625 Sheet

Width 1000mm / 1219mm /1250mm / 1500mm / 2000mm
Length 2000 mm / 2440 mm / 2500 mm / 3000 mm / 6000 mm
Thickness 0.1mm to 12 mm Thk
Specifications ASTM B443 / ASME SB443, AMS 5540
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Finish Hot rolled plate (HR), Cold rolled sheet (CR)

Inconel 625 Sheet & Plate Chemical Properties

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr
625	0.10 max	0.50 max	0.50 max	0.015 max	-	5.0 max	58.0 min	20.0 - 23.0

Inconel 625 Sheet & Plate Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Inconel 625	8.4 g/cm3	1350 °C (2460 °F)	Psi – 1,35,000 , MPa – 930	Psi – 75,000 , MPa – 705	42.5 %

Inconel 625 Sheet & Plate Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
625	2.4856	N06625	NCF 625	NA 21	ХН75МБТЮ	NC22DNB4M	NiCr22Mo9Nb

View Complete Details

Ask Latest Price & Details

Inconel 718 Plate

Width 1000mm / 1219mm /1250mm / 1500mm / 2000mm
Length 2000 mm / 2440 mm / 2500 mm / 3000 mm / 6000 mm
Thickness 0.1mm to 12 mm Thk
Specifications ASTM B670 / ASME SB670, AMS 5540
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Finish Hot rolled plate (HR), Cold rolled sheet (CR)

Inconel 718 Sheet & Plate Chemical Properties

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr
718	0.08 max	0.35 max	0.35 max	0.015 max	0.30 max	-	50.00 - 55.00	17.00 - 21.00

Inconel 718 Sheet & Plate Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)
8.2 g/cm3	1350 °C (2460 °F)	Psi – 1,35,000 , MPa – 930	Psi – 75,000 , MPa – 482	45 %

Inconel 718 Sheet & Plate Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
718	2.4668	N07718

View Complete Details

Ask Latest Price & Details

Nimonic Plate

Size 0.5 MM TO 200 MM THICK IN 1000 MM TO 2500 MM WIDTH & 2500 MM TO 12500 MM LENGTH
Diameter 6mm - 90mm
Material Nimonic 75, Nimonic 80a, Nimonic 90, Nimonic C263
Number Of Flower Hot Rolled Nimonic Sheet & Plate, Cold Rolled Nimonic Sheet & Plate
Standard ASTM B463 / ASME SB463

View Complete Details

Ask Latest Price & Details

Duplex Steel Sheet

Thickness 4mm-100mm
Material Duplex S32205 / S31803
Number Of Flower Hot Rolled Duplex Steel Sheet & Plate, Cold Rolled Duplex Steel Sheet & Plate
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Standard ASTM A240 / ASME SA240, ASTM A479 / ASME SA479
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching

View Complete Details

Ask Latest Price & Details

Duplex Steel 2205 Plates

Grade JIS, AISI, ASTM, GB, DIN, EN, etc
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness 0.3 mm to 120 mm
Specification ASTM A240 / ASME SA240
Surface Finishing Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered

Duplex Steel 2205/ 31803 Sheets & Plates Chemical Composition

Grade	Common Name	C%	Mn%	Si%	P%	S%	Cr%	Ni%	Mo%	N%
2205	S31803	0.030	2.00	1.00	0.030	0.020	21.0-23.0	4.5-6.5	2.5-3.5	0.08-0.20
2205	S32205	0.030	2.00	1.00	0.030	0.020	22.0-23.0	4.5-6.5	3.0-3.5	0.14-0.20

Duplex Steel 2205/ 31803 Sheets & Plates Mechanical Property

Tensile strength	620MPa min	Density	7,805kg/m3
Yield strength	450MPa mi	Elastic modulus	200GPa

Duplex Steel 2205/ 31803 Sheets & Plates Equivalent Grade

STANDARD	WNR.
Duplex S31803 / S32205	1.4462

View Complete Details

Ask Latest Price & Details

Duplex Steel 31803 Sheets

Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness 0.3 mm to 120 mm
Specification ASTM A240 / ASME SA240
Standard JIS, AISI, ASTM, GB, DIN, EN, etc
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Surface Finishing Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror

Duplex Steel 2205/ 31803 Sheets & Plates Chemical Composition

Grade	Common Name	C%	Mn%	Si%	P%	S%	Cr%	Ni%	Mo%	N%
2205	S31803	0.030	2.00	1.00	0.030	0.020	21.0-23.0	4.5-6.5	2.5-3.5	0.08-0.20
2205	S32205	0.030	2.00	1.00	0.030	0.020	22.0-23.0	4.5-6.5	3.0-3.5	0.14-0.20

Duplex Steel 2205/ 31803 Sheets & Plates Mechanical Property

Tensile strength	620MPa min	Density	7,805kg/m3
Yield strength	450MPa mi	Elastic modulus	200GPa

Duplex Steel 2205/ 31803 Sheets & Plates Equivalent Grade

STANDARD	WNR.
Duplex S31803 / S32205	1.4462

View Complete Details

Ask Latest Price & Details

Super Duplex Steel Sheet

Thickness 4mm-100mm
Material Super Duplex S32750 / S32760
Number Of Flower Hot Rolled Super Duplex Steel Sheet & Plate, Cold Rolled Super Duplex Steel Sheet & Plate
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Standard ASTM A240 / ASME SA240, ASTM A479 / ASME SA479
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush etc

View Complete Details

Ask Latest Price & Details

Super Duplex Steel S32750 Plate

Grade ASTM A240 / ASME SA240, ASTM A479 / ASME SA479
Thickness 4mm-100mm
Material Super Duplex S32750 / S32760
Number Of Flower Hot Rolled Super Duplex Steel S32750 / S32760 Sheet & Plate, Cold Rolled Super Duplex Steel S32750
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush

Super Duplex Steel S32750 / S32760 Sheet & Plate Chemical Composition

C	Cr	Ni	Mo	N	Others
0.020	25	7	4.0	.27	S=0.001

Super Duplex Steel S32750 / S32760 Sheet & Plate Mechanical Property

Ultimate Tensile Strength, ksi	116 min.
0.2% Offset Yield Strength 0.2%, ksi	80 min.
0.1% Offset Yield Strength 0.2%, ksi	91 min.
Elongation in 2 inches, %	15 min.
Hardness Rockwell C	32 max.
Impact Energy, ft.-lbs.	74 min.

Super Duplex Steel S32750 / S32760 Sheet & Plate Equivalent Grade

STANDARD	WNR.
Super Duplex S32750 / S32760	1.4410

View Complete Details

Ask Latest Price & Details

Super Duplex Steel S32760 Sheet

Thickness 4mm-100mm
Material Super Duplex S32760
Number Of Flower Hot Rolled Super Duplex Steel S32750 / S32760 Sheet & Plate, Cold Rolled Super Duplex Steel S32750
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Standard ASTM A240 / ASME SA240, ASTM A479 / ASME SA479
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc

Super Duplex Steel S32750 / S32760 Sheet & Plate Chemical Composition

C	Cr	Ni	Mo	N	Others
0.020	25	7	4.0	.27	S=0.001

Super Duplex Steel S32750 / S32760 Sheet & Plate Mechanical Property

Ultimate Tensile Strength, ksi	116 min.
0.2% Offset Yield Strength 0.2%, ksi	80 min.
0.1% Offset Yield Strength 0.2%, ksi	91 min.
Elongation in 2 inches, %	15 min.
Hardness Rockwell C	32 max.
Impact Energy, ft.-lbs.	74 min.

Super Duplex Steel S32750 / S32760 Sheet & Plate Equivalent Grade

STANDARD	WNR.
Super Duplex S32750 / S32760	1.4410

View Complete Details

Ask Latest Price & Details

Titanium Sheet

Size 15NB to 150NB In
Thickness from 2 to 40 mm
Material Titanium Gr 1, Titanium Gr 2, Titanium Gr 5 & TI6AL4V
Number Of Flower Hot Rolled Titanium Sheet & Plate, Cold Rolled Titanium Sheet & Plate
Standard ASTM B265 / ASME SB265
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching

View Complete Details

Ask Latest Price & Details

Titanium Gr1 Sheet

Thickness 0.3 mm to 120 mm
Surface Finishing Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror
Specification ASTM B265 / ASME SB265
Standard JIS, AISI, ASTM, GB, DIN, EN, etc
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc

Titanium Gr1 Sheet & Plate Chemical Composition

C	Fe	H	N	O	Ti
0.1	0.2	0.015	0.03	0.18	99.5

Titanium Gr1 Sheet & Plate Mechanical Property

Grade	Tensile (ksi)	Yield Strength (ksi)	Elongation %
Titanium Gr 1	240	170	24

Titanium Gr1 Sheet & Plate Equivalent Grade

STANDARD	UNS	WNR.
Titanium GR 1	R50250	3.7025

View Complete Details

Ask Latest Price & Details

Titanium Gr2 Sheet

Thickness 0.3 mm to 120 mm
Surface Finishing Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror
Specification ASTM B265 / ASME SB265
Standard JIS, AISI, ASTM, GB, DIN, EN, etc
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc

Titanium Gr2 Sheet & Plate Chemical Composition

C	Fe	H	N	O	Ti
0.1	0.3	0.015	0.03	0.25	99.2

Titanium Gr2 Sheet & Plate Mechanical Property

Grade	Tensile (ksi)	Yield Strength (ksi)	Hardness
Titanium Gr 2	50	40	14.9

Titanium Gr2 Sheet & Plate Equivalent Grade

STANDARD	UNS	WNR.
Titanium GR 2	R50400	3.7035

View Complete Details

Ask Latest Price & Details

Titanium Gr5 Plates

Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness 0.3 mm to 120 mm
Surface Finishing Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror
Specification ASTM B265 / ASME SB265
Standard JIS, AISI, ASTM, GB, DIN, EN, etc

Titanium Gr5 / Ti6al4v sheets & plates Chemical Composition

Al	Fe	O	Ti	V
6	0.25	0.2	90	4

Titanium Gr5 / Ti6al4v sheets & plates Mechanical Property

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Titanium Gr. 5	4.43 g/cm3	1632 °C (2970 °F)	Psi – 138000 , MPa – 950	Psi – 128000 , MPa – 880	14 %

Titanium Gr5 / Ti6al4v sheets & plates Equivalent Grade

STANDARD	UNS	WNR.
Titanium GR 5	R56400	3.7165

View Complete Details

Ask Latest Price & Details

Monel Sheet

Thickness from 2 to 40 mm
Material Monel R405, Monel 400, Monel K500
Number Of Flower Hot Rolled Monel Sheet & Plate, Cold Rolled Monel Sheet & Plate
Standard ASTM B 127 / ASME SB 127
Size 15NB to 150NB In

View Complete Details

Ask Latest Price & Details

Monel 400 Plate

Thickness 0.3 mm to 120 mm
Hardness Half Hard, Soft, Hard, Quarter Hard, Spring Hard
Specifications ASTM B127 / ASME SB127, BS EN 10088-2, en 10028-7, IS 6911
Dimension Standard MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc
Size Range Cold rolled ASME SB127 Grade 400 Monel Sheet 0.5-6.4 mm, Hot rolled ASME SB127 Grade 400 Monel Sheet 3.0–10.0 mm
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc

Monel 400 Sheet & Plate Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
Monel 400	2.4360	N04400	NW 4400	NA 13	МНЖМц 28-2,5-1,5	NU-30M	NiCu30Fe

Monel 400 Sheet & Plate Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni
Monel 400	0.30 max	2.00 max	0.50 max	0.024 max	28.00 – 34.00	2.50 max	63.00 min

Monel 400 Sheet & Plate Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Monel 400	8.8 g/cm3	1350 °C (2460 °F)	Psi – 80,000 , MPa – 550	Psi – 35,000 , MPa – 240	40 %

View Complete Details

Ask Latest Price & Details

Monel R405 Plate

Thickness 0.3 mm to 120 mm
Hardness Half Hard, Soft, Hard, Quarter Hard, Spring Hard
Specifications ASTM B127 / ASME SB127, BS EN 10088-2, en 10028-7, IS 6911
Dimension Standard MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc
Size Range Cold rolled ASME SB127 Grade 400 Monel Sheet 0.5-6.4 mm, Hot rolled ASME SB127 Grade 400 Monel Sheet 3.0–10.0 mm
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc

Monel R405 Sheet & Plate Equivalent Grades

STANDARD	UNS
Monel R405	N04405

Monel R405 Sheet & Plate Chemical Composition

Designation	Ni%	C%	Ti%	Ai%	Co%	Cr%	V%	W%	Mo%	Cu%	Nb/Cb Ta%	Fe%	Sonstige Autres-Other %
Alloy R 405	66.0	0.15	-	-	-	-	-	-	-	31.0	-	1.2	Mn 1.0; S 0.04

Monel R405 Sheet & Plate Mechanical Properties

Mechanical Analysis
Tensile strength, Ultimate	550 Mpa
Tensile strength, Yield	240 Mpa
Elongation at Break	48%

View Complete Details

Ask Latest Price & Details

Monel K500 Sheet

Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness 0.3 mm to 120 mm
Hardness Half Hard, Soft, Hard, Quarter Hard, Spring Hard
Specifications ASTM B127 / ASME SB127, BS EN 10088-2, en 10028-7, IS 6911
Dimension Standard MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc
Size Range Cold rolled ASME SB127 Grade K500 Monel Sheet 0.5-6.4 mm, Hot rolled ASME SB127 Grade K500 Monel Sheet 3.0–10.0 mm
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc

Monel K500 Sheet & Plate Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Monel K500	2.4375	N05500

Monel K500 Sheet & Plate Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni
Monel K500	0.25 max	1.5 max	0.5 max	0.010 max	27.00 – 33.00	0.5 – 2	63.00 min

Monel K500 Sheet & Plate Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Monel K500	8.44 g/cm3	1350 °C (2460 °F)	Psi – 160000 , MPa – 1100	Psi – 115000 , MPa – 790	20 %

View Complete Details

Ask Latest Price & Details

Alloy 20 Sheet

Hardness Half Hard, Soft, Hard, Quarter Hard, Spring Hard
Specifications ASTM B127 / ASME SB127, BS EN 10088-2, en 10028-7, IS 6911
Dimension Standard MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc
Size Range Cold rolled ASME SB127 Grade 20 Alloy Sheet 0.5-6.4 mm Hot rolled ASME SB127 Grade 20 Alloy Sheet 3.0–10.0 mm
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness 0.3 mm to 120 mm

Alloy 20 Sheet & Plate Chemical Composition

Grade	C	Mn	Si	S	Cu	Ni	Cr	Fe	Mo	P
Alloy 20	0.07 max	2.00 max	1.00 max	0.035 max	3.0-4.0	32.0-38.0	19.0-21.0	29.85 min*	2.0-3.0	0.045 max

Alloy 20 Sheet & Plate Mechanical Property

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.1 g/cm3	1443 °C (2430 °F)	Psi -80,000, MPa -551	Psi – 35,000, MPa – 241	30%

Alloy 20 Sheet & Plate Equivalent Grade

STANDARD	WERKSTOFF NR.	UNS	AFNOR	EN
Alloy 20	2.4660	N08020	Z2NCUD31-20AZ	NiCr20CuMo

View Complete Details

Ask Latest Price & Details

Stainless Steel Sheet

Size 1000 mm x 2000mm, 1220mm x 2440mm, 4' x 8', 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm
Material Stainless Steel 904L, 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317
Grade ASTM A240 / ASME SA240
Thickness 4.0mm - 100mm
Number Of Flower Hot Rolled Stainless Steel Sheet & Plate, Cold Rolled Stainless Steel Sheet & Plate

View Complete Details

Ask Latest Price & Details

Zeron 100 Sheet

Width 1000mm / 1219mm /1250mm / 1500mm / 2000mm / Custom
Length 2000 mm / 2440 mm / 2500 mm / 3000 mm / S318030 mm / Custom
Thickness 0.1mm to 12 mm
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Standard ASTM A240 / ASME SA240

Zeron 100 Sheet & Plate Chemical Composition

Grade

Cr

Ni

Mo

C

W

Cu

N

Mn

Si

P

S

Zeron 100

24.0-26.0

6.0-8.0

3.0-4.0

0.030 Max

0.5-1.0

0.50-1.0

0.2-0.3

1.00 Max

1.0 Max

0.03 Max

0.01 Max

Zeron 100 Sheet & Plate Mechanical Property

Grades	Alloy Zeron 100 Tensile Strength, ksi	.2% Yield Strength, ksi	% Elongation in 50mm	Hardness Max.
Zeron 100	109	80	25	28 HRC

Zeron 100 Sheet & Plate Equivalent Grade

STANDARD	WERKSTOFF NR.	UNS
Zeron 100	1.4501	S32760

View Complete Details

Ask Latest Price & Details

Nickel Plate

Size 15NB to 150NB In
Material Nickel 200/201
Number Of Flower Hot Rolled Nickel Sheet & Plate, Cold Rolled Nickel Sheet & Plate
Standard ASTM B162 / ASME SB162
Diameter 0.1mm to 100 mm Thk

View Complete Details

Ask Latest Price & Details

Nickel 200 Plate

Thickness 0.3 mm to 120 mm
Specification ASTM B162 / ASME SB162
Standard JIS, AISI, ASTM, GB, DIN, EN, etc
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc

Nickel 200/ 201 Sheet & Plate Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni
Nickel 200	0.15 max	0.35 max	0.35 max	0.01 max	0.25 max	0.40 max	99.0 min
Nickel 201	0.02 max	0.35 max	0.35 max	0.01 max	0.25 max	0.40 max	99.0 min

Nickel 200/ 201 Sheet & Plate Mechanical Property

Grade	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Nickel 200	8.9 g/cm3	1446 °C (2635 °F)	Psi – 67000 , MPa – 462	Psi – 21500 , MPa – 148	45 %
Nickel 201	8.9 g/cm3	1446 °C (2635 °F)	Psi – 67000 , MPa – 462	Psi – 21500 , MPa – 148	45 %

Nickel 200/ 201 Sheet & Plate Equivalent Grade

STANDARD	UNS	WNR.	JIS	EN
Nickel 200	N02200	2.4066	NW 2200	Ni 99.2
Nickel 201	N02201	2.4068	NW 2201	LC-Ni 99

View Complete Details

Ask Latest Price & Details

Nickel 201 Plate

Thickness 0.3 mm to 120 mm
Specification ASTM B162 / ASME SB162
Standard JIS, AISI, ASTM, GB, DIN, EN, etc
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc

Nickel 200/ 201 Sheet & Plate Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni
Nickel 200	0.15 max	0.35 max	0.35 max	0.01 max	0.25 max	0.40 max	99.0 min
Nickel 201	0.02 max	0.35 max	0.35 max	0.01 max	0.25 max	0.40 max	99.0 min

Nickel 200/ 201 Sheet & Plate Mechanical Property

Grade	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Nickel 200	8.9 g/cm3	1446 °C (2635 °F)	Psi – 67000 , MPa – 462	Psi – 21500 , MPa – 148	45 %
Nickel 201	8.9 g/cm3	1446 °C (2635 °F)	Psi – 67000 , MPa – 462	Psi – 21500 , MPa – 148	45 %

Nickel 200/ 201 Sheet & Plate Equivalent Grade

STANDARD	UNS	WNR.	JIS	EN
Nickel 200	N02200	2.4066	NW 2200	Ni 99.2
Nickel 201	N02201	2.4068	NW 2201	LC-Ni 99

View Complete Details

Ask Latest Price & Details

Nimonic Sheet

Size 0.5 MM TO 200 MM THICK IN 1000 MM TO 2500 MM WIDTH & 2500 MM TO 12500 MM LENGTH
Material Nimonic 75, Nimonic 80a, Nimonic 90, Nimonic C263
Number Of Flower Hot Rolled Nimonic Sheet & Plate, Cold Rolled Nimonic Sheet & Plate
Standard ASTM B463 / ASME SB463
Diameter 6mm - 90mm

View Complete Details

Ask Latest Price & Details

Nimonic 75 Sheet

Grade Nimonic 75 (Ni 66 Cu 34 (Ni 99.0% Min)
Size 0.5 MM TO 200 MM THICK IN 1000 MM TO 2500 MM WIDTH & 2500 MM TO 12500 MM LENGTH
Finishing Nimonic 75 Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8)
Hardness Nimonic 75 Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Specifications ASTM B463 / ASME SB463
Standard ASTM, ASME and API

Nimonic 75 Sheet & Plate Chemical Composition

Grade	Ni	Cr	Fe	P	Cu	Al	Ti	C	Mn	Si
Nimonic 75	Bal.	19-22	Max 1.0	Max 0.015	Max 0.2	Max 0.15	0.15-0.35	Max 0.12	Max 0.70	Max 0.80

Nimonic 75 Sheet & Plate Mechanical Property

Grade Nimonic 75	Tensile strength(annealed)	Yield strength(annealed)	Elongation at Break	Modulus of Elasticity
Metric	750 MPa	275 MPa	42%	206 GPa
Imperial	109 ksi	40 ksi	42%	29878 ksi

Nimonic 75 Sheet & Plate Equivalent Grade

STANDARD	WERKSTOFF NR.	UNS
Nimonic 75	2.4951	N06075

View Complete Details

Ask Latest Price & Details

Nimonic 80a Sheets

Dimensions ASTM, ASME, and API
Thickness Range from .008″ to .0125″
Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Standards ASTM B637 / ASME SB637
Tempers Annealed, 1/4, 1/2 Hard, 3/4 Hard, Full Hard

Nimonic 80a Sheets & Plates Chemical Composition

Grade

Al

B

C

Cr

Co

Cu

Fe

Mn

Ni

P

Si

S

Nimonic 80A

1 – 1.8

0.008 max

0.1 max

18 – 21

0.2 max

3 max

1 max

Balance

0.045 max

1 max

0.015 max

Nimonic 80a Sheets & Plates Mechanical Property

Grade	Condition	Ultimate Tensile Strength MPA	Yield Strength MPA	Elongation on 4D (min)	Hardness min
Nimonic 80A	Solution Annealed & Precipatation Treated (aged)	994	616	20	300 HV

Nimonic 80a Sheets & Plates Equivalent Grade

STANDARD	WERKSTOFF NR.	UNS
Nimonic 80A	2.4952	N07080

View Complete Details

Ask Latest Price & Details

Nimonic C263 Sheet

Size 0.5 MM TO 200 MM THICK IN 1000 MM TO 2500 MM WIDTH & 2500 MM TO 12500 MM LENGTH
Finishing Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Grade Nimonic 263 (UNS N07263 )
Specifications ASTM B463 / ASME SB463
Standard ASTM, ASME and API
Specialize Shim Sheet, Perforated Sheet, B. Q. Profile.

Nimonic C263 Sheet & Plate Chemical Composition

Grade	Ni	Co	Cr	Mo	Ti	Fe	Mn	Al	Si	Cu	C	B	S
Nimonic 263	49	19-21	19-21	5.60-6.10	1.90-2.40	0.70	0.60	0.60	0.40	0.20	0.040 – 0.080	0.0050	0.0070

Nimonic C263 Sheet & Plate Mechanical Property

Grade	Material Sheet	Temperature °C	Yield Strength 0.2 % (MPa)	Tensile Strength (MPa)	Elongation (%)	Hardness HV
Nimonic 263	Nimonic 263 Sheet Solution Treated (AMS 5872 / BS HR206)	RT	–	–	–	22.5 max
Nimonic 263 Sheet Heat Treated (AMS 5872 / BS HR206	RT	580 (typical)	973 (typical)	39 –	–
Nimonic 263 Sheet Heat Treated (AMS 5872 / BS HR206	780	403 (min)	541 (min)	9	–

Nimonic C263 Sheet & Plate Equivalent Grade

STANDARD	WERKSTOFF NR.	UNS
Nimonic 263	2.4650	N07263

View Complete Details

Ask Latest Price & Details

Inconel Wire

Specifications ASTM B164 ASME SB164
Dimensions ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length 100 mm TO 6000 mm
Diameter 10 mm To 100 mm
Specialize Filler Wire, Coil Wire, Electrode Wire, Welding Wire.
Grades Inconel 625 Wire, Inconel 901 Wire, Inconel 926 Wire, Inconel 925 Wire, Inconel 601 Wire, Inconel 600 Wire, Inconel 625 Wire, Inconel 825 Wire, Inconel 718 Wire, Inconel X750 Wire, Inconel 800, 800H, 800HT Wire.

View Complete Details

Ask Latest Price & Details

Hastelloy Wire

Specifications ASTM B164 ASME SB164
Dimensions ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length 100 mm TO 6000 mm
Diameter 10 mm To 100 mm
Specialize Filler Wire, Coil Wire, Electrode Wire, Welding Wire.
Grades Hastelloy C276 Wire and Hastelloy C22 Wire.

View Complete Details

Ask Latest Price & Details

Monel Wire

Specifications ASTM B164 ASME SB164
Dimensions ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length 100 mm TO 6000 mm
Diameter 10 mm To 100 mm
Specialize Filler Wire, Coil Wire, Electrode Wire, Welding Wire.
Grades Monel R405 Wire, Monel 400 Wire, Monel K500 Wire.

View Complete Details

Ask Latest Price & Details

Duplex Steel Wire

Diameter 100 mm To 6000 mm
Specifications ASTM A276 ASME SA276
Dimensions ASTM, ASME
Thickness 10mm to 100mm
Specialize Wire, Filler Wire, Coil Wire
Grades Duplex 2205 / 31803.

View Complete Details

Ask Latest Price & Details

Super Duplex Steel Wire

Diameter 100 mm To 6000 mm
Specifications ASTM A276 ASME SA276
Dimensions ASTM, ASME
Thickness 10mm to 100mm
Specialize Wire, Filler Wire, Coil Wire
Grades Super Duplex S32750 / S32760.

View Complete Details

Ask Latest Price & Details

Titanium Wire

Length 100 mm TO 6000 mm
Specifications ASTM B863 ASME SB863
Dimensions ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Diameter 10 mm To 100 mm
Specialize Filler Wire, Coil Wire, Electrode Wire, Welding Wire.
Grades Titanium Gr 1, Titanium Gr 2, Titanium Gr 5 / TI6AL4V.

View Complete Details

Ask Latest Price & Details

Stainless Steel Wire

Length 30m to 100″
Specifications ASTM A 164 ASME SA 164
Standard DIN, ASTM, BS and all International Standards
Width 1m to 48″
Type Wire Mesh , Hexagonal Wiremesh, Welding Wiremesh, Netting Wiremesh, Woven Wiremesh , Spring Steel wire mesh, Fencing Wiremesh etc.
Grades Stainless Steel 422, 904, 304, 304L, 304H, 309, 310, 310S, 316, 316L, 317, 317L, 321, 321H, 347, 347H Wire.

View Complete Details

Ask Latest Price & Details

Inconel Forged Circle And Ring

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Thickness 1 mm To 100 mm
Diameter Up to 2000 mm
Specifications ASTM A240 / ASME SA240
Cutting Plazma & Machined Cut
Finish HR, CR, 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

View Complete Details

Ask Latest Price & Details

Hastelloy Forged Circle And Ring

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Thickness 1 mm To 100 mm
Diameter Up to 2000 mm
Specifications ASTM A240 / ASME SA240
Cutting Plazma & Machined Cut
Finish HR, CR, 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

View Complete Details

Ask Latest Price & Details

Monel Forged Circle And Ring

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Thickness 1 mm To 100 mm
Diameter Up to 2000 mm
Specifications ASTM A240 / ASME SA240
Cutting Plazma & Machined Cut
Finish HR, CR, 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

View Complete Details

Ask Latest Price & Details

Alloy 20 Forged Circle And Ring

Specifications ASTM A240 / ASME SA240
Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Thickness 1 mm To 100 mm
Diameter Up to 2000 mm
Cutting Plazma & Machined Cut
Finish HR, CR, 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

View Complete Details

Ask Latest Price & Details

Alloy A286 Forged Circle And Ring

Specifications ASTM A240 / ASME SA240
Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Thickness 1 mm To 100 mm
Diameter Up to 2000 mm
Cutting Plazma & Machined Cut
Finish HR, CR, 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

View Complete Details

Ask Latest Price & Details

Duplex Steel Forged Circle And Ring

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Thickness 1 mm To 100 mm
Diameter Up to 2000 mm
Specifications ASTM A240 / ASME SA240
Cutting Plazma & Machined Cut
Finish HR, CR, 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

View Complete Details

Ask Latest Price & Details

Super Duplex Steel Forged Circle And Ring

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Thickness 1 mm To 100 mm
Diameter Up to 2000 mm
Specifications ASTM A240 / ASME SA240
Cutting Plazma & Machined Cut
Finish HR, CR, 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

View Complete Details

Ask Latest Price & Details

Titanium Forged Circle And Ring

Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Specifications ASTM A240 / ASME SA240
Thickness 1 mm To 100 mm
Diameter Up to 2000 mm
Cutting Plazma & Machined Cut
Finish HR, CR, 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

View Complete Details

Ask Latest Price & Details

Stainless Steel Forged Circle And Ring

Dimension EN, DIN, JIS, ASTM, BS, ASME, AISI
Thickness 1 mm To 100 mm
Diameter Up to 2000 mm
Specifications ASTM A240 / ASME SA240
Cutting Plazma & Machined Cut
Finish HR, CR, 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

View Complete Details

Ask Latest Price & Details

Flange

Size 1/2″ (15 NB) to 48″ (1200NB)
Specifications ASTM A182 / ASME SA182
Standards ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Class / Pressure 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.

View Complete Details

Ask Latest Price & Details

Pipe Fitting

Thickness 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Number Of Flower Seamless / Welded / Fabricated
Specifications ASTM A815 / ASME SA815
Size Seamless Pipe Fittings: 1/2″ – 10″, Welded Pipe Fittings: 1/2″ – 48″
Standards ASME/ANSI B16.9, ASME B16.28, MSS-SP-43

View Complete Details

Ask Latest Price & Details

Fastener

Size M2, M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M20, M24, M30, M36 to M160
Fasteners Material Specification UNS C51000 Bolts, UNS C51100 Bolts
Standard DIN, UNI, ISO, JIS, GB, IS, BS, ASME, ANSI, ASTM

View Complete Details

Ask Latest Price & Details