New India offers specially designed motors forRerolling Mill Duty Motor. Our motors are rugged, heavy duty, compact, and maintenance friendly. Their shock resistant construction takes care of the heavy mechanical jerks and electrical spikes in current due to heavy load cycles.

Salient Features:

• Functional, Rugged, Heavy duty, Compact & Maintenance friendly.


• Shock resistant construction in cast Iron & Steel fabricated body.


• Rotor is specially designed with tight-bar-in-slot construction with taper section to obtain adequate stating torque & critical load factors.


• Stators & Rotors are flood impregnated with polyester resin varnish to ensure longevity of protection against chemicals and moisture.


• A high carbon, hard steel shaft with a large cross section provides, strength with minimum deflection & vibration.


• Heavy duty Bearings, Brushgear & Slipring ensure high efficiency even under severe operational conditions.


• Design ensures efficient ventilation & heat transfer from windings & cores. Can offer IP23/IC01; IPW 44/IC01; IP55/IC61; IP55/IC66; IP55/IC81


• Terminations are provided in a large box to ensure full electrical clearances & insulations.


• Use low-loss magnetic core stamping & high conductivity copper conductors (solid & wire) for windings, with class B/F insulation.


• With a design that has proved itself over 3500+ machines that have been deployed in the last 50+ years clearly this is the choice for all suitable applications.


• Can take and sustain high number of sudden overloads.

New India offers Low Voltage Slip Ring electric motors ranging Enclosed construction. Our Wound closed type motors have the same qualities of our Wound open type motors with additional enclosure construction that makes it very safe to use in dusty environments too. The design also takes care of the cooling and operation under rigorous conditions. Motors comply to IS standards. Specially designed motors are offered with IPSS standards to meet the requirements of Steel Plants. Motors are designed especially for applications with high inertia loads. It has reliable, rugged design and construction. Motors are suitable for starting with external resistance in motor circuit.

Applications:

• Mixing and Rotory Mills


• Fans


• Compressors


• Crushers


• Pulverisors

Silent Features:

• Designed specially for applications with high inertia loads.


• Reliable Rugged design and Construction.


• Low Noise and Vibration.


• Suitable for Direct/Belt Driven Applications.


• Bi-Directional Rotation.


• Optimum fan design for better cooling.


• Rigidly sealed Terminal box.


• Suitable for starting with external resistance in motor circuit.

New India offers an extensive range of motors suitable for Material Handling & Crane Applications. Motors are offered with Cage & Wound Rotors ranging from 0.37 to 350KW with various speeds depending on polarity 4 / 6 / 8 / 10; Frames: 71 to 400. Motors are offered with voltages of 220 / 380 / 415 / 550 / 690. Considering the critical nature of the application, motors have been built to last and are Robust and Rugged in construction. Motors have high starting and pullout torques and are suited to take on variable and shock loads with high inertia.

Applications:

• CT and LT drives for Cranes


• Hoist for Cranes


• Lifts


• Material Handling Equipment


• Winch and Sluicies


• Auxillary Motors in Rolling Mills.

Salient Features:

• Robust and rugged design and construction.


• High starting and pullout torques.


• Energy efficient.


• Designed to take variable and shock loads with high intertia.


• Special dual coated copper winding wire for inverter driven motors.


• Large slipring unit design for wound rotor motors.


• Larger terminal box size.


• Motors can be offered with double side shaft extension / tapered shaft extension.

New India offers specially designed Vertical Hollow Shaft Motors for Vertical turbine pumps. The special design makes them easy to install & maintain. The design ensures a proper & permanent shaft alignment with the pump. Motors are provided with a Non-reversible ratchet that prevents the reverse rotation of the motor due to the back flow of water or phase reversal. The Motors are provided with bearings having ample thrust capacity. The bearings are capable of taking the entire thrust load of the pump shaft assembly and the water column.

Features:

• Specially designed for Vertical Turbine Pumps.


• Easy Installation as maintenance.


• Permanent shaft alignment.


• Well Protected construction.


• High thrust Capability.


• Rugged design.


• Anticlockwise direction of rotation looking from top of the motor.


• Non-reversible ratchet, which prevents the reverse rotation of the motor due to the back flow of water or phase reversal.


• Motors are provided with bearing ample thrust capacity. Bearing are capable of taking the entire thrust load of the pumps shaft assembly & the water column.


• Metalic fans for effective cooling in shorter cycles.


• A unibake component painting system at controlled atmosphere ensures quality finish, scratch and durability.

New India offers Energy Efficient LV Aluminum & Cast Iron motor range in frame. Motors are suitable for a diverse range of applications from Pumps, Fans, Conveyors, Compressors, Crushers, Machine Tools, Material Handling & Crane, Roller Table Drives etc. in various industries. Our motors have withstood many applications having adverse operating conditions including Repeated Starting, Occasional Overloading & Other Severe Conditions & Applications.

We follow the highest manufacturing processes & practices. Motors with IEC & NEMA standards are offered with efficiency class IE1, IE2, IE3.

Applications:

• Pumps


• Fans


• Compressors


• Crushers


• Machine Tools


• Material Handling


• Textile


• Conveyors


• Cranes

Salient Features:

• Inventor Duty.


• IE2/IE3/EFF1/EFF2 Motors.


• Energy Efficient and therefore are ideally suited for power intensive, process and other industries.


• Class F insulation with class B temperature rise limit.


• Suitable for DOL starting up to 100 frame and DOL / STAR-DELTA for 112 and above frames.


• High Starting and pullout torques.


• Low Noise level with 85 dB [A] at 1 metre and conform to IS : 12065.


• Low vibration levels conform to IS : 12075.


• Foot / Flange [ Both B&C type] mounting with single / double shaft extension.


• Suitable for flexible direct coupling or belt drives with Load GD2 equal to motor Gd2.


• Diecast aluminium rotor is designed to withstand the severe forces encountered during starting. Special copper brazed rotors are proved for high speed applications.


• Optimum fan design for better cooling and minimum energy consumption.


• Rigidly sealed Terminal Box at RHS of the motor when viewed from Driving End [ other positions can be offered against specific request].


• Terminal boxes are larger in size with improved aesthetics, sufficient electrical clearances and are sealed against ingress of moisture and dust. Boxes for frames 250 and above are tested for through fault level of 43.7KA for 0.25 secs. Terminal Box can be rotatable 360 in step of 90.


• Endshields on DE and NDE are identical and can be interchanged, if called for, minimizing the users inventory.

New India offers Low Voltage Slip Ring electric motors ranging construction. Our Slipring motors are one of the most robust designs serving the industry for over 5 decades. The special care taken to ensure the quality of the Slip Ring and matching Brush Gear arrangement ensures trouble free operations and long lasting brush life. Our Slip Rings are specially treated copper strips moulded into epoxy-based insulation, the unique design gives them excellent stability in high temperatures with excellent anti-tracking property. Motors are designed especially for applications with high inertia loads. It has Reliable, Rugged design and Construction. Motors are suitable for starting with external resistance in motor circuit.

Applications:

• Mixing and Rotory Mills


• Fans


• Compressors


• Crushers


• Pulverisors

Salient Features:

• Designed specially for applications with high inertia loads.


• Reliable Rugged design and Construction.


• Low Noise and Vibration.


• Optimum fan design for better cooling.


• Suitable for Direct/Belt Driven Applications.


• Bi-Directional Rotation.


• Rigidly sealed Terminal box.


• Suitable for starting with external resistance in motor circuit.

Cage-Open Type motors are specially designed for very safe environment with IP23 protection where IP55 protection is not required, thus reducing the capital cost of motors. Motors are offered in Low Voltage & High Voltage variants. Owing to efficient Design and Construction, motors have a High output to weight ratio. Motors are Reliable, Rugged and have Low Noise and Vibration. Motors are suitable for Pumps, Compressors and Fans.Low Voltage motors are offered from 15 to 250KW and High Voltage motors are offered from 250KW and above.

Applications:

• Pumps


• Fans


• Compressors

Salient Features:

• High Output/Weight Ratio.


• Reliable Rugged design ad Construction.


• Low Noise and Vibration.


• Cast Iron body.


• Optimum fan design for better cooling.


• Rigidly sealed Terminal box.


• EC grade Di-Cast Rotor.


• Suitable for Direct/Belt Driven Applications.


• DOL/Star-Delta Starting.


• Bi-Directional Rotation.