Write a Review
Our Products
We offer a complete product range of TURBIDITY METER, Digital Thermo Hygrometer, DEMULSIBILITY BATH, Spring Loaded Roller and Walk in Oven
Spring loaded roller is capable of applying fixed load of 50N (5 Kgs) as per the standard when pressed. Caltechs compact spring loaded roller can be held by hand firmly, easily pressed to get desired load and reduce human errors for applying constant pressure to provide best dust test results. Calibration adjustment is possible simply by adjusting nut. One single broad roller spring loaded roller along with dust test kit helps to accurately determine size and particle size of dust particles on steel surfaces prior to painting. Assure equal pressure for the complete tape to get best results. No maintenance required for this instrument.
Use of spring loaded roller assist to improve adhesion of coating and premature failure of coating. Dust on blast cleaned steel surfaces may reduce the adhesion of applied coatings and by absorbing moisture may promote the corrosion of the blast cleaned steel.
The Paint Inspectors Kit is a comprehensive kit of equipment, which will cater for the day-to-day standard requirements of the Industrial Painter and Inspector.The Paint Inspectors Kits contains the following listed equipment. Paint Inspector Kit in one carrying case with the entire basic test instrument make inspectors job easy. Highly recommended for QA / QC dept. of paint shops
| Kit K2002 Contents |
| C2200 Coating Thickness Meter with carrying case (Refer various options)F1009 Set of 8 Precision Measured Calibration FoilsZ1003 Steel Zero PlateT2002 Infrared Digital ThermometerH2005 RH%-Dewpoint MeterW2001- Wet Film Gauge (Stainless, range 25m to 1, 500m 45 teeth)R1002 Testex Tape roll (X-Coarse)R1004 Testex Snap GaugeR1003 Burnishing toolR1006 Surface Profile GaugeU1005 Inspection Manual of Coating Defects |
*Disp Indoor temperature and humidity, Outdoor temperature;
lay*Record the maximum a minimum temperature and humidity; *Deg. and deg switch;
nd *Freeze from 1 to +4; *Temperature measure range: Indoor: 10+50(+14+122) Outdoor: 50+ (58+158) *Humidity measure range:2099%RH; 70*Accuracy: +/1, +/5%RH; *Time and Alarm
*Battery: 1x 1.5V operation (AAA);
*Figure Size: 110 x 100 x 22 mm
Free-standing, hard wall, modular, prefabricated cleanroom system that is designed to provide superior Cleanroom performance and aesthetic appeal. Its modular, prefabricated design combines functionality with flexibility to create systems that will meet your cleanroom needs of today and into the future.
These rooms are available from Class 100, 000 to Class 10. The rooms are available with open free spans from 6 to 34 feet and interior room heights of 8 to 16 feet. Multiple rooms can be combined to form larger Modular Clean Room systems. The system allows for additional sections to be added to existing rooms to expand the clean room at a future date. Cleanroom has high visual appeal and is often used as a showcase cleanroom system. The large clear walls offer good visibility into and out of the room. Clear anodized aluminum panels cover the filter light area above the drop ceiling, so the exterior has a clean appearance. These Room also known as Hard Wall Clean Room and Soft Wall Clean Room.
Orbit Group (Orbit Group)
Plot No. 21, Ramappa Nagar, Perungudi, , Chennai, Tamil Nadu - 600096, India
Share us via
