The tool consists of only 4 parts – shank, HSS blade, fulcrum-cum-lock screw and screw for adjusting blade projection. Both these screws are easily adjustable with a standard Allen key. Tool shank is made of alloy steel and heat-treated for wear-resistance. The holding end of the tool shank is cylindrical and gets mounted on the machine spindle through a collet or a drill chuck. The other end of the shank has a slot, which accommodates the blade. THE BLADE, having certain unique features, is made of high cobalt HSS. The cutting edge of the blade has a very long life. Depending upon he hardness of the job, cutting parameters and the other factors, the blade lasts thousands of jobs, before it gets ready for regrinding. The blade can be fixed, removed and adjusted to achieve the right projection easily in no time through an Allen key, even when the tool is mounted on the machine spindle. Spare blades are always generally available which are replaceable. The standard blade has 45º angle and it has two cutting edges for performing duplex chamfering operation. Different angle and /or single cutting edge can be provided on request.

The tool consists of only 4 parts – shank, HSS blade, fulcrum-cum-lock screw and screw for adjusting blade projection. Both these screws are easily adjustable with a standard Allen key. Tool shank is made of alloy steel and heat-treated for wear-resistance. The holding end of the tool shank is cylindrical and gets mounted on the machine spindle through a collet or a drill chuck. The other end of the shank has a slot, which accommodates the blade. THE BLADE, having certain unique features, is made of high cobalt HSS. The cutting edge of the blade has a very long life. Depending upon he hardness of the job, cutting parameters and the other factors, the blade lasts thousands of jobs, before it gets ready for regrinding. The blade can be fixed, removed and adjusted to achieve the right projection easily in no time through an Allen key, even when the tool is mounted on the machine spindle. Spare blades are always generally available which are replaceable. The standard blade has 45º angle and it has two cutting edges for performing duplex chamfering operation. Different angle and /or single cutting edge can be provided on request.