Detachable pillar units can also be provided for easy regrinding of dies.

H & J steel pillar die sets, are manufactured with top and base plates of mild steel, duly stress relieved in electrical furnace to eliminate stresses generated by gas cutting and to ensure accuracy over prolonged periods. "H & J" steel pillar die sets are manufactured in square or rectangular die spaces and with diagonal rear centre pillar position from 75mm x 50 mm die space up to 600mm x 450 mm die space and also in four pillars up to 1500mm x 600 mm die space. The standard thickness and overall sizes of the plates are as per catalogue but can also be manufactured as per the customer requirement.

Over all size up to 2500 x 1500 mm shanks, ball sleeves, detachable pillar units can be provided to any of the steel pillar die sets if required. Die sets

with aluminium alloy or alloy steel can also be manufactured against specific requirements. In view of continuous developments specification may be changed.

DIE SETS

Ball Bearing Die Sets: Standard Die sets are manufactured to a very close limit, but where the nature of work requires extreme accuracy or where high speed presses are used, we recommend the use of our precision die sets fitted with ball bearing bushes.

We supply following types of Dies:-

H & J BALL SLEEVE pillar die sets are manufactured for precision dies and high speed presses and can be supplied in any of our ranges. In this, high precision bearing grade balls are used with aluminium alloy or brass, ball sleeves. Orders for shanks of required sizes can be supplied with 'H & J' pillar die sets at extra cost.

Rear Pillar Die Set

We are a foremost Die Sets exporter from India. We bring pillar die sets, steel die sets, standard die sets etc., with us. Pillar die sets play an important role in press tools. We offer a good range of pillar die sets and also accept order for tailor made pillar die sets. "H & J " pillar die sets are manufactured with precision, ground top and bottom bolster plates. Pillar and bushes are made of special steel, hardened, ground and lapped to close tolerances.

Ball Bearing Bushes: Made from specially treated solid alluminium alloy, Ball bearing bushes are invaluable in high production presses where precision is vital. The close helical pattern of balls fitted in the cage is specially create to increase lubrication resulting in smooth, frictionless movement. This freedom of movement facilities are the accurate setting of punches and dies. Other applications for Ball bearing bushes are those involving moving loads freely over a distance as movement involving both linear and rotary motion.

We can offer different variations of standard models and also can provide special set to suit your exact needs, ensuring that all material used is of the highest quality, the most suitable for each application. All steel Top and Bottoms are machined and grounded to an accuracy of 0.00025 - 0.0005. Pillar and bushes are made from good quality steel, hardened 58/60 Rc. and grounded to B. S. Specifications.

Detachable pillar units can also be provided for easy regrinding of dies.

H & J steel pillar die sets, are manufactured with top and base plates of mild steel, duly stress relieved in electrical furnace to eliminate stresses generated by gas cutting and to ensure accuracy over prolonged periods. "H & J" steel pillar die sets are manufactured in square or rectangular die spaces and with diagonal rear centre pillar position from 75mm x 50 mm die space up to 600mm x 450 mm die space and also in four pillars up to 1500mm x 600 mm die space. The standard thickness and overall sizes of the plates are as per catalogue but can also be manufactured as per the customer requirement.

Over all size up to 2500 x 1500 mm shanks, ball sleeves, detachable pillar units can be provided to any of the steel pillar die sets if required. Die sets

with aluminium alloy or alloy steel can also be manufactured against specific requirements. In view of continuous developments specification may be changed.

DIE SETS

Ball Bearing Die Sets: Standard Die sets are manufactured to a very close limit, but where the nature of work requires extreme accuracy or where high speed presses are used, we recommend the use of our precision die sets fitted with ball bearing bushes.

We supply following types of Dies:-

H & J BALL SLEEVE pillar die sets are manufactured for precision dies and high speed presses and can be supplied in any of our ranges. In this, high precision bearing grade balls are used with aluminium alloy or brass, ball sleeves. Orders for shanks of required sizes can be supplied with 'H & J' pillar die sets at extra cost.

Rear Pillar Die Set

We are a foremost Die Sets exporter from India. We bring pillar die sets, steel die sets, standard die sets etc., with us. Pillar die sets play an important role in press tools. We offer a good range of pillar die sets and also accept order for tailor made pillar die sets. "H & J " pillar die sets are manufactured with precision, ground top and bottom bolster plates. Pillar and bushes are made of special steel, hardened, ground and lapped to close tolerances.

Ball Bearing Bushes: Made from specially treated solid alluminium alloy, Ball bearing bushes are invaluable in high production presses where precision is vital. The close helical pattern of balls fitted in the cage is specially create to increase lubrication resulting in smooth, frictionless movement. This freedom of movement facilities are the accurate setting of punches and dies. Other applications for Ball bearing bushes are those involving moving loads freely over a distance as movement involving both linear and rotary motion.

We can offer different variations of standard models and also can provide special set to suit your exact needs, ensuring that all material used is of the highest quality, the most suitable for each application. All steel Top and Bottoms are machined and grounded to an accuracy of 0.00025 - 0.0005. Pillar and bushes are made from good quality steel, hardened 58/60 Rc. and grounded to B. S. Specifications.