Flocculators

The choice and dosage of the chemical coagulant to be adopted for removing suspended solids from waste-water are established based on an evaluation of the results obtained from the Jar Test. Multiple stirrers with reproducible stirring speeds ensure repeatable and reliable results.

LEACHING TEST

This is a test on solid wastes to be sent to the dump that uses diluted acetic acid or carbon dioxide-saturated water to detect the presence of toxic heavy metals.

JLT 4 AND JLT 6 – JAR & LEACHING TESTS

The JLT 4 and JLT 6 are multiple stirrers with reproducible stirring speeds allowing standard conditions to be met during analysis, a basic requirement in order to obtain reliable and repeatable results. The highly versatile stainless steel stirring shafts offer height adjustment and are fitted with a self-locking device with clutch. The sample can be backlit for easier reading.

The instrument has an ergonomic design and the control panel is sloped to facilitate parameter settings and readings. The rotation speed can be set from 10 to 300 rpm, with 1 rpm intervals, the time remaining can be set in hours or minutes.

FP4 – PORTABLE FLOCCULATOR

The FP4 is the portable Flocculator that can be connected to a battery or a car lighter socket.

The anti-skid base ensures stability whilst the highly versatile stainless steel stirring shafts offer height adjustment and are fitted with a self-locking device with clutch. The FP4 is particularly suitable for carrying out on-site Jar Tests.

FC4S / FC6S - FLOCCULATORS

The FC4S and FC6S are highly resistant to chemical and mechanical aggression and corrosion. The highly versatile stainless steel stirring shafts offer height adjustment and are fitted with a self-locking device with clutch. The sample can be backlit for easier reading.

Motion is transmitted by four (in the case of the FC4S) or six (in the case of the FC6S) direct current gear motors in order to ensure optimum performance and reproducibility even at low speeds. With 9 different speed settings for each position the instrument is totally flexible; the stirring speed can be set using the selectors on the front panel (10-15-30-45-60-90-120-150-200 rpm). On demand version can reach 300 rpm.